redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

pinctrl: qcom: spmi-mpp: Implement support for sink mode

Browse source 
The MPP supports three modes; digital, analog and sink mode. This patch
implements support for the latter.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Bjorn Andersson 2015-06-17 23:47:28 -07:00 committed by Linus Walleij
parent eaaf5dd464
commit 0e948042c4
2 changed files with 82 additions and 50 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
View file

@ -134,6 +134,11 @@ to specify in a pin configuration subnode:
and/or output-high, output-low MPP could operate as
Bidirectional Logic, Analog Input, Analog Output.
- qcom,sink-mode:
Usage: optional
Value type: <u32> or <none>
Definition: Selects sink mode of operation
- qcom,amux-route:
Usage: optional
Value type: <u32>

127
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
View file

@ -62,6 +62,7 @@
#define PMIC_MPP_REG_DIG_IN_CTL 0x43
#define PMIC_MPP_REG_EN_CTL 0x46
#define PMIC_MPP_REG_AIN_CTL 0x4a
#define PMIC_MPP_REG_SINK_CTL 0x4c
/* PMIC_MPP_REG_MODE_CTL */
#define PMIC_MPP_REG_MODE_VALUE_MASK 0x1
@ -98,6 +99,7 @@
/* Qualcomm specific pin configurations */
#define PMIC_MPP_CONF_AMUX_ROUTE (PIN_CONFIG_END + 1)
#define PMIC_MPP_CONF_ANALOG_MODE (PIN_CONFIG_END + 2)
#define PMIC_MPP_CONF_SINK_MODE (PIN_CONFIG_END + 3)
/**
* struct pmic_mpp_pad - keep current MPP settings
@ -109,11 +111,13 @@
* @input_enabled: Set to true if MPP input buffer logic is enabled.
* @analog_mode: Set to true when MPP should operate in Analog Input, Analog
* Output or Bidirectional Analog mode.
* @sink_mode: Boolean indicating if ink mode is slected
* @num_sources: Number of power-sources supported by this MPP.
* @power_source: Current power-source used.
* @amux_input: Set the source for analog input.
* @pullup: Pullup resistor value. Valid in Bidirectional mode only.
* @function: See pmic_mpp_functions[].
* @drive_strength: Amount of current in sink mode
*/
struct pmic_mpp_pad {
u16 base;
@ -123,11 +127,13 @@ struct pmic_mpp_pad {
bool output_enabled;
bool input_enabled;
bool analog_mode;
bool sink_mode;
unsigned int num_sources;
unsigned int power_source;
unsigned int amux_input;
unsigned int pullup;
unsigned int function;
unsigned int drive_strength;
};
struct pmic_mpp_state {
@ -140,12 +146,14 @@ struct pmic_mpp_state {
static const struct pinconf_generic_params pmic_mpp_bindings[] = {
{"qcom,amux-route", PMIC_MPP_CONF_AMUX_ROUTE, 0},
{"qcom,analog-mode", PMIC_MPP_CONF_ANALOG_MODE, 0},
{"qcom,sink-mode", PMIC_MPP_CONF_SINK_MODE, 0},
};
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item pmic_conf_items[] = {
PCONFDUMP(PMIC_MPP_CONF_AMUX_ROUTE, "analog mux", NULL, true),
PCONFDUMP(PMIC_MPP_CONF_ANALOG_MODE, "analog output", NULL, false),
PCONFDUMP(PMIC_MPP_CONF_SINK_MODE, "sink mode", NULL, false),
};
#endif
@ -243,6 +251,38 @@ static int pmic_mpp_get_function_groups(struct pinctrl_dev *pctldev,
return 0;
}
static int pmic_mpp_write_mode_ctl(struct pmic_mpp_state *state,
struct pmic_mpp_pad *pad)
{
unsigned int val;
if (pad->analog_mode) {
val = PMIC_MPP_MODE_ANALOG_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
val = PMIC_MPP_MODE_ANALOG_BIDIR;
else
val = PMIC_MPP_MODE_ANALOG_OUTPUT;
}
} else if (pad->sink_mode) {
val = PMIC_MPP_MODE_CURRENT_SINK;
} else {
val = PMIC_MPP_MODE_DIGITAL_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
val = PMIC_MPP_MODE_DIGITAL_BIDIR;
else
val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
}
}
val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
}
static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
unsigned pin)
{
@ -255,31 +295,7 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
pad->function = function;
if (!pad->analog_mode) {
val = PMIC_MPP_MODE_DIGITAL_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
val = PMIC_MPP_MODE_DIGITAL_BIDIR;
else
val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
}
} else {
val = PMIC_MPP_MODE_ANALOG_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
val = PMIC_MPP_MODE_ANALOG_BIDIR;
else
val = PMIC_MPP_MODE_ANALOG_OUTPUT;
}
}
val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
if (ret < 0)
return ret;
ret = pmic_mpp_write_mode_ctl(state, pad);
val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
@ -339,9 +355,15 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
case PMIC_MPP_CONF_AMUX_ROUTE:
arg = pad->amux_input;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = pad->drive_strength;
break;
case PMIC_MPP_CONF_ANALOG_MODE:
arg = pad->analog_mode;
break;
case PMIC_MPP_CONF_SINK_MODE:
arg = pad->sink_mode;
break;
default:
return -EINVAL;
}
@ -403,13 +425,19 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad->output_enabled = true;
pad->out_value = arg;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = pad->drive_strength;
break;
case PMIC_MPP_CONF_AMUX_ROUTE:
if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
return -EINVAL;
pad->amux_input = arg;
break;
case PMIC_MPP_CONF_ANALOG_MODE:
pad->analog_mode = true;
pad->analog_mode = !!arg;
break;
case PMIC_MPP_CONF_SINK_MODE:
pad->sink_mode = !!arg;
break;
default:
return -EINVAL;
@ -434,29 +462,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (ret < 0)
return ret;
if (!pad->analog_mode) {
val = 0; /* just digital input */
if (pad->output_enabled) {
if (pad->input_enabled)
val = 2; /* digital input and output */
else
val = 1; /* just digital output */
}
} else {
val = 4; /* just analog input */
if (pad->output_enabled) {
if (pad->input_enabled)
val = 3; /* analog input and output */
else
val = 5; /* just analog output */
}
}
val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
ret = pmic_mpp_write_mode_ctl(state, pad);
if (ret < 0)
return ret;
@ -476,6 +482,9 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
"0.6kOhm", "10kOhm", "30kOhm", "Disabled"
};
static const char *const modes[] = {
"digital", "analog", "sink"
};
pad = pctldev->desc->pins[pin].drv_data;
@ -495,7 +504,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
seq_printf(s, " %-4s", pad->analog_mode ? "ana" : "dig");
seq_printf(s, " %-7s", modes[pad->analog_mode ? 1 : (pad->sink_mode ? 2 : 0)]);
seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %-8s", biases[pad->pullup]);
@ -666,31 +675,43 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = false;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_DIGITAL_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = false;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_DIGITAL_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = false;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = true;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = true;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_ANALOG_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = true;
pad->sink_mode = false;
break;
case PMIC_MPP_MODE_CURRENT_SINK:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = false;
pad->sink_mode = true;
break;
default:
dev_err(state->dev, "unknown MPP direction\n");
@ -721,6 +742,12 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT;
pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK;
val = pmic_mpp_read(state, pad, PMIC_MPP_REG_SINK_CTL);
if (val < 0)
return val;
pad->drive_strength = val;
val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL);
if (val < 0)
return val;