phy: power management support

This patch adds the power management support into the physical
abstraction layer.

Suspend and resume functions respectively turns on/off the bit 11
into the PHY Basic mode control register.
Generic PHY device starts supporting PM.

In order to support the wake-on LAN and avoid to put in power down
the PHY device, the MDIO is aware of what the Ethernet device wants to do.

Voluntary, no CONFIG_PM defines were added into the sources.
Also generic suspend/resume functions are exported to allow
other drivers use them (such as genphy_config_aneg etc.).

Within the phy_driver_register function, we need to remove the
memset. It overrides the device driver owner and it is not good.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Giuseppe Cavallaro 2008-11-28 16:24:56 -08:00 committed by David S. Miller
parent 914804b95c
commit 0f0ca340e5
3 changed files with 42 additions and 5 deletions

View file

@ -284,9 +284,12 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
{
int ret = 0;
struct device_driver *drv = dev->driver;
struct phy_driver *phydrv = to_phy_driver(drv);
struct phy_device *phydev = to_phy_device(dev);
if (drv && drv->suspend)
ret = drv->suspend(dev, state);
if ((!device_may_wakeup(phydev->dev.parent)) &&
(phydrv && phydrv->suspend))
ret = phydrv->suspend(phydev);
return ret;
}
@ -295,9 +298,12 @@ static int mdio_bus_resume(struct device * dev)
{
int ret = 0;
struct device_driver *drv = dev->driver;
struct phy_driver *phydrv = to_phy_driver(drv);
struct phy_device *phydev = to_phy_device(dev);
if (drv && drv->resume)
ret = drv->resume(dev);
if ((!device_may_wakeup(phydev->dev.parent)) &&
(phydrv && phydrv->resume))
ret = phydrv->resume(phydev);
return ret;
}

View file

@ -779,7 +779,35 @@ static int genphy_config_init(struct phy_device *phydev)
return 0;
}
int genphy_suspend(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(genphy_suspend);
int genphy_resume(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(genphy_resume);
/**
* phy_probe - probe and init a PHY device
@ -855,7 +883,6 @@ int phy_driver_register(struct phy_driver *new_driver)
{
int retval;
memset(&new_driver->driver, 0, sizeof(new_driver->driver));
new_driver->driver.name = new_driver->name;
new_driver->driver.bus = &mdio_bus_type;
new_driver->driver.probe = phy_probe;
@ -890,6 +917,8 @@ static struct phy_driver genphy_driver = {
.features = 0,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = {.owner= THIS_MODULE, },
};

View file

@ -467,6 +467,8 @@ int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_read_status(struct phy_device *phydev);
int genphy_suspend(struct phy_device *phydev);
int genphy_resume(struct phy_device *phydev);
void phy_driver_unregister(struct phy_driver *drv);
int phy_driver_register(struct phy_driver *new_driver);
void phy_prepare_link(struct phy_device *phydev,