From 19506fc51852e859bb08ab5abbdb8fd02b7392f2 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 25 Sep 2008 16:45:10 +0200 Subject: [PATCH 1/4] [MIPS] au1000: Make sure GPIO value is zero or one David Brownell wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 1f058434b726..e660ddd611c4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -62,7 +62,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; gpio2->dir |= 0x01 << gpio; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } From f4d15f1c877644a604f8c8c3d094c13f9f8bdcf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 15:05:06 +0100 Subject: [PATCH 2/4] [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip27.c | 44 ++++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82bf..f97ab1461012 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + return 0; +} - if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); - if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; } - irq_to_bridge[irq] = bc; - irq_to_slot[irq] = slot; - - return irq; + return dev; } /* Do platform specific device initialization at pci_enable_device() time */ int pcibios_plat_dev_init(struct pci_dev *dev) { + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + + irq = bc->pci_int[slot]; + if (irq == -1) { + irq = request_bridge_irq(bc); + if (irq < 0) + return irq; + + bc->pci_int[slot] = irq; + } + + irq_to_bridge[irq] = bc; + irq_to_slot[irq] = slot; + + dev->irq = irq; + return 0; } From 2dc42b47a7886bdc87514990c68ecdf8de61e653 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 27 Sep 2008 16:06:16 +0200 Subject: [PATCH 3/4] [MIPS] BCM47xx: Fix build error due to missing PCI functions This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-bcm47xx.c | 60 +++++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 arch/mips/pci/pci-bcm47xx.c diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37fd..c8c32f417b6c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 000000000000..bea9b6cdfdbf --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + From ac82da3381fc663dbda31612a0bff60bc41676a3 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Fri, 26 Sep 2008 22:27:11 +0200 Subject: [PATCH 4/4] [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- drivers/ssb/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 87ab2443e66d..0ffabf5c0b60 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -471,6 +471,7 @@ static int ssb_devices_register(struct ssb_bus *bus) #endif break; case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; break; }