mmc: Fixes for Dual Data Rate (DDR) support

The DDR support patch needs the following fixes:

- The block driver does not need to know about DDR, any more
  than it needs to know about bus width.
- Not only the card must be switched to DDR mode.  The host
  controller must also be configured, which is done through
  the 'set_ios()' function.
- Do not set the DDR mode state until after the switch command
  is successful.
- Setting block length is not supported in DDR mode.  Make that
  a core function and change the other place it is used (mmc_test)
  also.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/card/block.c

@@ -373,8 +373,6 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
 			readcmd = MMC_READ_SINGLE_BLOCK;
 			writecmd = MMC_WRITE_BLOCK;
 		}
-		if (mmc_card_ddr_mode(card))
-			brq.data.flags |= MMC_DDR_MODE;
 		if (rq_data_dir(req) == READ) {
 			brq.cmd.opcode = readcmd;
 			brq.data.flags |= MMC_DATA_READ;
@@ -653,26 +651,15 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 static int
 mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
 {
-	struct mmc_command cmd;
 	int err;
 
-	/*
-	 * Block-addressed and ddr mode supported cards
-	 * ignore MMC_SET_BLOCKLEN.
-	 */
-	if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
-		return 0;
-
 	mmc_claim_host(card->host);
-	cmd.opcode = MMC_SET_BLOCKLEN;
+	err = mmc_set_blocklen(card, 512);
-	cmd.arg = 512;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-	err = mmc_wait_for_cmd(card->host, &cmd, 5);
 	mmc_release_host(card->host);
 
 	if (err) {
-		printk(KERN_ERR "%s: unable to set block size to %d: %d\n",
+		printk(KERN_ERR "%s: unable to set block size to 512: %d\n",
-			md->disk->disk_name, cmd.arg, err);
+			md->disk->disk_name, err);
 		return -EINVAL;
 	}
 

drivers/mmc/card/mmc_test.c

@@ -155,17 +155,7 @@ struct mmc_test_card {
  */
 static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size)
 {
-	struct mmc_command cmd;
+	return mmc_set_blocklen(test->card, size);
-	int ret;
-
-	cmd.opcode = MMC_SET_BLOCKLEN;
-	cmd.arg = size;
-	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-	ret = mmc_wait_for_cmd(test->card->host, &cmd, 0);
-	if (ret)
-		return ret;
-
-	return 0;
 }
 
 /*

drivers/mmc/core/bus.c

@@ -253,14 +253,16 @@ int mmc_add_card(struct mmc_card *card)
 	}
 
 	if (mmc_host_is_spi(card->host)) {
-		printk(KERN_INFO "%s: new %s%s card on SPI\n",
+		printk(KERN_INFO "%s: new %s%s%s card on SPI\n",
 			mmc_hostname(card->host),
 			mmc_card_highspeed(card) ? "high speed " : "",
+			mmc_card_ddr_mode(card) ? "DDR " : "",
 			type);
 	} else {
-		printk(KERN_INFO "%s: new %s%s card at address %04x\n",
+		printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
 			mmc_hostname(card->host),
 			mmc_card_highspeed(card) ? "high speed " : "",
+			mmc_card_ddr_mode(card) ? "DDR " : "",
 			type, card->rca);
 	}
 

drivers/mmc/core/core.c

@@ -650,13 +650,22 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
 	mmc_set_ios(host);
 }
 
+/*
+ * Change data bus width and DDR mode of a host.
+ */
+void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, int ddr)
+{
+	host->ios.bus_width = width;
+	host->ios.ddr = ddr ? MMC_DDR_MODE : MMC_SDR_MODE;
+	mmc_set_ios(host);
+}
+
 /*
  * Change data bus width of a host.
  */
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
 {
-	host->ios.bus_width = width;
+	mmc_set_bus_width_ddr(host, width, 0);
-	mmc_set_ios(host);
 }
 
 /**
@@ -1399,6 +1408,21 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
 }
 EXPORT_SYMBOL(mmc_erase_group_aligned);
 
+int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
+{
+	struct mmc_command cmd;
+
+	if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
+		return 0;
+
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	cmd.opcode = MMC_SET_BLOCKLEN;
+	cmd.arg = blocklen;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+	return mmc_wait_for_cmd(card->host, &cmd, 5);
+}
+EXPORT_SYMBOL(mmc_set_blocklen);
+
 void mmc_rescan(struct work_struct *work)
 {
 	struct mmc_host *host =

drivers/mmc/core/core.h

@@ -35,6 +35,7 @@ void mmc_set_chip_select(struct mmc_host *host, int mode);
 void mmc_set_clock(struct mmc_host *host, unsigned int hz);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
+void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width, int ddr);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 

drivers/mmc/core/mmc.c

@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -518,32 +518,32 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	mmc_set_clock(host, max_dtr);
 
 	/*
-	 * Activate DDR50 mode (if supported).
+	 * Indicate DDR mode (if supported).
 	 */
 	if (mmc_card_highspeed(card)) {
 		if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
 			&& (host->caps & (MMC_CAP_1_8V_DDR)))
-				mmc_card_set_ddr_mode(card);
+				ddr = 1;
 		else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
 			&& (host->caps & (MMC_CAP_1_2V_DDR)))
-				mmc_card_set_ddr_mode(card);
+				ddr = 1;
 	}
 
 	/*
-	 * Activate wide bus (if supported).
+	 * Activate wide bus and DDR (if supported).
 	 */
 	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
 	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
 		unsigned ext_csd_bit, bus_width;
 
 		if (host->caps & MMC_CAP_8_BIT_DATA) {
-			if (mmc_card_ddr_mode(card))
+			if (ddr)
 				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8;
 			else
 				ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
 			bus_width = MMC_BUS_WIDTH_8;
 		} else {
-			if (mmc_card_ddr_mode(card))
+			if (ddr)
 				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4;
 			else
 				ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
@@ -557,12 +557,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			goto free_card;
 
 		if (err) {
-			printk(KERN_WARNING "%s: switch to bus width %d "
+			printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
 			       "failed\n", mmc_hostname(card->host),
-			       1 << bus_width);
+			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_set_bus_width(card->host, bus_width);
+			mmc_card_set_ddr_mode(card);
+			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
 

include/linux/mmc/core.h

@@ -109,7 +109,6 @@ struct mmc_data {
 #define MMC_DATA_WRITE	(1 << 8)
 #define MMC_DATA_READ	(1 << 9)
 #define MMC_DATA_STREAM	(1 << 10)
-#define MMC_DDR_MODE	(1 << 11)
 
 	unsigned int		bytes_xfered;
 
@@ -154,6 +153,8 @@ extern int mmc_can_secure_erase_trim(struct mmc_card *card);
 extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
 				   unsigned int nr);
 
+extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+
 extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
 extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
 

include/linux/mmc/host.h

@@ -50,6 +50,11 @@ struct mmc_ios {
 #define MMC_TIMING_LEGACY	0
 #define MMC_TIMING_MMC_HS	1
 #define MMC_TIMING_SD_HS	2
+
+	unsigned char	ddr;			/* dual data rate used */
+
+#define MMC_SDR_MODE		0
+#define MMC_DDR_MODE		1
 };
 
 struct mmc_host_ops {