sh: use sci_out() for early printk
Use sci_out() instead of ctrl_outw() for early printk setup code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
parent
0146ba78b9
commit
0fba321365
|
@ -141,6 +141,7 @@ static void scif_sercon_init(char *s)
|
|||
*/
|
||||
static void scif_sercon_init(char *s)
|
||||
{
|
||||
struct uart_port *port = &scif_port;
|
||||
unsigned baud = DEFAULT_BAUD;
|
||||
char *e;
|
||||
|
||||
|
@ -160,19 +161,20 @@ static void scif_sercon_init(char *s)
|
|||
baud = DEFAULT_BAUD;
|
||||
}
|
||||
|
||||
ctrl_outw(0, scif_port.mapbase + 8);
|
||||
ctrl_outw(0, scif_port.mapbase);
|
||||
sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
|
||||
sci_out(port, SCSMR, 0);
|
||||
|
||||
/* Set baud rate */
|
||||
ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
|
||||
(32 * baud) - 1, scif_port.mapbase + 4);
|
||||
sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
|
||||
(32 * baud) - 1);
|
||||
|
||||
ctrl_outw(12, scif_port.mapbase + 24);
|
||||
ctrl_outw(8, scif_port.mapbase + 24);
|
||||
ctrl_outw(0, scif_port.mapbase + 32);
|
||||
ctrl_outw(0x60, scif_port.mapbase + 16);
|
||||
ctrl_outw(0, scif_port.mapbase + 36);
|
||||
ctrl_outw(0x30, scif_port.mapbase + 8);
|
||||
sci_out(port, SCFCR, 12);
|
||||
sci_out(port, SCFCR, 8);
|
||||
|
||||
sci_out(port, SCSPTR, 0);
|
||||
sci_out(port, SCxSR, 0x60);
|
||||
sci_out(port, SCLSR, 0);
|
||||
sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
|
||||
}
|
||||
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
|
||||
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
|
||||
|
|
Loading…
Reference in a new issue