sata_sil24: Use memory barriers before issuing commands

The data in the cmd_block buffers may reach the main memory after the
writel() to the device ports. This patch introduces two calls to wmb()
to ensure the relative ordering.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Colin Tuckley <colin.tuckley@arm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Catalin Marinas 2010-06-10 17:02:12 +01:00 committed by Jeff Garzik
parent 14e45c15e1
commit 1082345290

View file

@ -622,6 +622,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
irq_enabled = readl(port + PORT_IRQ_ENABLE_SET); irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
/*
* The barrier is required to ensure that writes to cmd_block reach
* the memory before the write to PORT_CMD_ACTIVATE.
*/
wmb();
writel((u32)paddr, port + PORT_CMD_ACTIVATE); writel((u32)paddr, port + PORT_CMD_ACTIVATE);
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
@ -895,6 +900,11 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
activate = port + PORT_CMD_ACTIVATE + tag * 8; activate = port + PORT_CMD_ACTIVATE + tag * 8;
/*
* The barrier is required to ensure that writes to cmd_block reach
* the memory before the write to PORT_CMD_ACTIVATE.
*/
wmb();
writel((u32)paddr, activate); writel((u32)paddr, activate);
writel((u64)paddr >> 32, activate + 4); writel((u64)paddr >> 32, activate + 4);