clk: shmobile: Add R-Car Gen2 clocks support
The R-Car Gen2 SoCs (R8A7790 and R8A7791) have several clocks that are too custom to be supported in a generic driver. Those clocks can be divided in two categories: - Fixed rate clocks with multiplier and divisor set according to boot mode configuration - Custom divider clocks with SoC-specific divider values This driver supports both. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
This commit is contained in:
parent
6ce4eac1f6
commit
10cdfe9f32
|
@ -0,0 +1,32 @@
|
|||
* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
|
||||
|
||||
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
|
||||
and several fixed ratio dividers.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: Must be one of
|
||||
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
|
||||
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
|
||||
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
|
||||
|
||||
- reg: Base address and length of the memory resource used by the CPG
|
||||
|
||||
- clocks: Reference to the parent clock
|
||||
- #clock-cells: Must be 1
|
||||
- clock-output-names: The names of the clocks. Supported clocks are "main",
|
||||
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
|
||||
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
cpg_clocks: cpg_clocks@e6150000 {
|
||||
compatible = "renesas,r8a7790-cpg-clocks",
|
||||
"renesas,rcar-gen2-cpg-clocks";
|
||||
reg = <0 0xe6150000 0 0x1000>;
|
||||
clocks = <&extal_clk>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "main", "pll0, "pll1", "pll3",
|
||||
"lb", "qspi", "sdh", "sd0", "sd1", "z";
|
||||
};
|
|
@ -35,6 +35,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
|
|||
obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
|
||||
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
|
||||
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
|
||||
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/
|
||||
|
||||
obj-$(CONFIG_X86) += x86/
|
||||
|
||||
|
|
5
drivers/clk/shmobile/Makefile
Normal file
5
drivers/clk/shmobile/Makefile
Normal file
|
@ -0,0 +1,5 @@
|
|||
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
|
||||
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
|
||||
|
||||
# for emply built-in.o
|
||||
obj-n := dummy
|
298
drivers/clk/shmobile/clk-rcar-gen2.c
Normal file
298
drivers/clk/shmobile/clk-rcar-gen2.c
Normal file
|
@ -0,0 +1,298 @@
|
|||
/*
|
||||
* rcar_gen2 Core CPG Clocks
|
||||
*
|
||||
* Copyright (C) 2013 Ideas On Board SPRL
|
||||
*
|
||||
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*/
|
||||
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/clkdev.h>
|
||||
#include <linux/clk/shmobile.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/math64.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
struct rcar_gen2_cpg {
|
||||
struct clk_onecell_data data;
|
||||
spinlock_t lock;
|
||||
void __iomem *reg;
|
||||
};
|
||||
|
||||
#define CPG_SDCKCR 0x00000074
|
||||
#define CPG_PLL0CR 0x000000d8
|
||||
#define CPG_FRQCRC 0x000000e0
|
||||
#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
|
||||
#define CPG_FRQCRC_ZFC_SHIFT 8
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Z Clock
|
||||
*
|
||||
* Traits of this clock:
|
||||
* prepare - clk_prepare only ensures that parents are prepared
|
||||
* enable - clk_enable only ensures that parents are enabled
|
||||
* rate - rate is adjustable. clk->rate = parent->rate * mult / 32
|
||||
* parent - fixed parent. No clk_set_parent support
|
||||
*/
|
||||
|
||||
struct cpg_z_clk {
|
||||
struct clk_hw hw;
|
||||
void __iomem *reg;
|
||||
};
|
||||
|
||||
#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw)
|
||||
|
||||
static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct cpg_z_clk *zclk = to_z_clk(hw);
|
||||
unsigned int mult;
|
||||
unsigned int val;
|
||||
|
||||
val = (clk_readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK)
|
||||
>> CPG_FRQCRC_ZFC_SHIFT;
|
||||
mult = 32 - val;
|
||||
|
||||
return div_u64((u64)parent_rate * mult, 32);
|
||||
}
|
||||
|
||||
static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long *parent_rate)
|
||||
{
|
||||
unsigned long prate = *parent_rate;
|
||||
unsigned int mult;
|
||||
|
||||
if (!prate)
|
||||
prate = 1;
|
||||
|
||||
mult = div_u64((u64)rate * 32, prate);
|
||||
mult = clamp(mult, 1U, 32U);
|
||||
|
||||
return *parent_rate / 32 * mult;
|
||||
}
|
||||
|
||||
static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct cpg_z_clk *zclk = to_z_clk(hw);
|
||||
unsigned int mult;
|
||||
u32 val;
|
||||
|
||||
mult = div_u64((u64)rate * 32, parent_rate);
|
||||
mult = clamp(mult, 1U, 32U);
|
||||
|
||||
val = clk_readl(zclk->reg);
|
||||
val &= ~CPG_FRQCRC_ZFC_MASK;
|
||||
val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
|
||||
clk_writel(val, zclk->reg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct clk_ops cpg_z_clk_ops = {
|
||||
.recalc_rate = cpg_z_clk_recalc_rate,
|
||||
.round_rate = cpg_z_clk_round_rate,
|
||||
.set_rate = cpg_z_clk_set_rate,
|
||||
};
|
||||
|
||||
static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
|
||||
{
|
||||
static const char *parent_name = "pll0";
|
||||
struct clk_init_data init;
|
||||
struct cpg_z_clk *zclk;
|
||||
struct clk *clk;
|
||||
|
||||
zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
|
||||
if (!zclk)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
init.name = "z";
|
||||
init.ops = &cpg_z_clk_ops;
|
||||
init.flags = 0;
|
||||
init.parent_names = &parent_name;
|
||||
init.num_parents = 1;
|
||||
|
||||
zclk->reg = cpg->reg + CPG_FRQCRC;
|
||||
zclk->hw.init = &init;
|
||||
|
||||
clk = clk_register(NULL, &zclk->hw);
|
||||
if (IS_ERR(clk))
|
||||
kfree(zclk);
|
||||
|
||||
return clk;
|
||||
}
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* CPG Clock Data
|
||||
*/
|
||||
|
||||
/*
|
||||
* MD EXTAL PLL0 PLL1 PLL3
|
||||
* 14 13 19 (MHz) *1 *1
|
||||
*---------------------------------------------------
|
||||
* 0 0 0 15 x 1 x172/2 x208/2 x106
|
||||
* 0 0 1 15 x 1 x172/2 x208/2 x88
|
||||
* 0 1 0 20 x 1 x130/2 x156/2 x80
|
||||
* 0 1 1 20 x 1 x130/2 x156/2 x66
|
||||
* 1 0 0 26 / 2 x200/2 x240/2 x122
|
||||
* 1 0 1 26 / 2 x200/2 x240/2 x102
|
||||
* 1 1 0 30 / 2 x172/2 x208/2 x106
|
||||
* 1 1 1 30 / 2 x172/2 x208/2 x88
|
||||
*
|
||||
* *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
|
||||
*/
|
||||
#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
|
||||
(((md) & BIT(13)) >> 12) | \
|
||||
(((md) & BIT(19)) >> 19))
|
||||
struct cpg_pll_config {
|
||||
unsigned int extal_div;
|
||||
unsigned int pll1_mult;
|
||||
unsigned int pll3_mult;
|
||||
};
|
||||
|
||||
static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
|
||||
{ 1, 208, 106 }, { 1, 208, 88 }, { 1, 156, 80 }, { 1, 156, 66 },
|
||||
{ 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208, 88 },
|
||||
};
|
||||
|
||||
/* SDHI divisors */
|
||||
static const struct clk_div_table cpg_sdh_div_table[] = {
|
||||
{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
|
||||
{ 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
|
||||
{ 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
|
||||
};
|
||||
|
||||
static const struct clk_div_table cpg_sd01_div_table[] = {
|
||||
{ 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
|
||||
{ 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
|
||||
};
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Initialization
|
||||
*/
|
||||
|
||||
static u32 cpg_mode __initdata;
|
||||
|
||||
static struct clk * __init
|
||||
rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
|
||||
const struct cpg_pll_config *config,
|
||||
const char *name)
|
||||
{
|
||||
const struct clk_div_table *table = NULL;
|
||||
const char *parent_name = "main";
|
||||
unsigned int shift;
|
||||
unsigned int mult = 1;
|
||||
unsigned int div = 1;
|
||||
|
||||
if (!strcmp(name, "main")) {
|
||||
parent_name = of_clk_get_parent_name(np, 0);
|
||||
div = config->extal_div;
|
||||
} else if (!strcmp(name, "pll0")) {
|
||||
/* PLL0 is a configurable multiplier clock. Register it as a
|
||||
* fixed factor clock for now as there's no generic multiplier
|
||||
* clock implementation and we currently have no need to change
|
||||
* the multiplier value.
|
||||
*/
|
||||
u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
|
||||
mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
|
||||
} else if (!strcmp(name, "pll1")) {
|
||||
mult = config->pll1_mult / 2;
|
||||
} else if (!strcmp(name, "pll3")) {
|
||||
mult = config->pll3_mult;
|
||||
} else if (!strcmp(name, "lb")) {
|
||||
div = cpg_mode & BIT(18) ? 36 : 24;
|
||||
} else if (!strcmp(name, "qspi")) {
|
||||
div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
|
||||
? 16 : 20;
|
||||
} else if (!strcmp(name, "sdh")) {
|
||||
table = cpg_sdh_div_table;
|
||||
shift = 8;
|
||||
} else if (!strcmp(name, "sd0")) {
|
||||
table = cpg_sd01_div_table;
|
||||
shift = 4;
|
||||
} else if (!strcmp(name, "sd1")) {
|
||||
table = cpg_sd01_div_table;
|
||||
shift = 0;
|
||||
} else if (!strcmp(name, "z")) {
|
||||
return cpg_z_clk_register(cpg);
|
||||
} else {
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
|
||||
if (!table)
|
||||
return clk_register_fixed_factor(NULL, name, parent_name, 0,
|
||||
mult, div);
|
||||
else
|
||||
return clk_register_divider_table(NULL, name, parent_name, 0,
|
||||
cpg->reg + CPG_SDCKCR, shift,
|
||||
4, 0, table, &cpg->lock);
|
||||
}
|
||||
|
||||
static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
|
||||
{
|
||||
const struct cpg_pll_config *config;
|
||||
struct rcar_gen2_cpg *cpg;
|
||||
struct clk **clks;
|
||||
unsigned int i;
|
||||
int num_clks;
|
||||
|
||||
num_clks = of_property_count_strings(np, "clock-output-names");
|
||||
if (num_clks < 0) {
|
||||
pr_err("%s: failed to count clocks\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
|
||||
clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL);
|
||||
if (cpg == NULL || clks == NULL) {
|
||||
/* We're leaking memory on purpose, there's no point in cleaning
|
||||
* up as the system won't boot anyway.
|
||||
*/
|
||||
pr_err("%s: failed to allocate cpg\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
spin_lock_init(&cpg->lock);
|
||||
|
||||
cpg->data.clks = clks;
|
||||
cpg->data.clk_num = num_clks;
|
||||
|
||||
cpg->reg = of_iomap(np, 0);
|
||||
if (WARN_ON(cpg->reg == NULL))
|
||||
return;
|
||||
|
||||
config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
|
||||
|
||||
for (i = 0; i < num_clks; ++i) {
|
||||
const char *name;
|
||||
struct clk *clk;
|
||||
|
||||
of_property_read_string_index(np, "clock-output-names", i,
|
||||
&name);
|
||||
|
||||
clk = rcar_gen2_cpg_register_clock(np, cpg, config, name);
|
||||
if (IS_ERR(clk))
|
||||
pr_err("%s: failed to register %s %s clock (%ld)\n",
|
||||
__func__, np->name, name, PTR_ERR(clk));
|
||||
else
|
||||
cpg->data.clks[i] = clk;
|
||||
}
|
||||
|
||||
of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
|
||||
}
|
||||
CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks",
|
||||
rcar_gen2_cpg_clocks_init);
|
||||
|
||||
void __init rcar_gen2_clocks_init(u32 mode)
|
||||
{
|
||||
cpg_mode = mode;
|
||||
|
||||
of_clk_init(NULL);
|
||||
}
|
19
include/linux/clk/shmobile.h
Normal file
19
include/linux/clk/shmobile.h
Normal file
|
@ -0,0 +1,19 @@
|
|||
/*
|
||||
* Copyright 2013 Ideas On Board SPRL
|
||||
*
|
||||
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_CLK_SHMOBILE_H_
|
||||
#define __LINUX_CLK_SHMOBILE_H_
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
void rcar_gen2_clocks_init(u32 mode);
|
||||
|
||||
#endif
|
Loading…
Reference in a new issue