phy: rename struct omap_control_usb to struct omap_control_phy
Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
parent
db68e80f08
commit
14da699bc0
|
@ -31,12 +31,22 @@ config PHY_MVEBU_SATA
|
|||
depends on OF
|
||||
select GENERIC_PHY
|
||||
|
||||
config OMAP_CONTROL_PHY
|
||||
tristate "OMAP CONTROL PHY Driver"
|
||||
help
|
||||
Enable this to add support for the PHY part present in the control
|
||||
module. This driver has API to power on the USB2 PHY and to write to
|
||||
the mailbox. The mailbox is present only in omap4 and the register to
|
||||
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
|
||||
additional register to power on USB3 PHY/SATA PHY/PCIE PHY
|
||||
(PIPE3 PHY).
|
||||
|
||||
config OMAP_USB2
|
||||
tristate "OMAP USB2 PHY Driver"
|
||||
depends on ARCH_OMAP2PLUS
|
||||
depends on USB_PHY
|
||||
select GENERIC_PHY
|
||||
select OMAP_CONTROL_USB
|
||||
select OMAP_CONTROL_PHY
|
||||
help
|
||||
Enable this to support the transceiver that is part of SOC. This
|
||||
driver takes care of all the PHY functionality apart from comparator.
|
||||
|
@ -47,7 +57,7 @@ config TI_PIPE3
|
|||
tristate "TI PIPE3 PHY Driver"
|
||||
depends on ARCH_OMAP2PLUS || COMPILE_TEST
|
||||
select GENERIC_PHY
|
||||
select OMAP_CONTROL_USB
|
||||
select OMAP_CONTROL_PHY
|
||||
help
|
||||
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
|
||||
driver takes care of all the PHY functionality apart from comparator.
|
||||
|
|
|
@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
|
|||
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
|
||||
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
|
||||
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
|
||||
obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
|
||||
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
|
||||
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
|
||||
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* omap-control-usb.c - The USB part of control module.
|
||||
* omap-control-phy.c - The PHY part of control module.
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
|
@ -24,36 +24,36 @@
|
|||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/usb/omap_control_usb.h>
|
||||
#include <linux/phy/omap_control_phy.h>
|
||||
|
||||
/**
|
||||
* omap_control_usb_phy_power - power on/off the phy using control module reg
|
||||
* omap_control_phy_power - power on/off the phy using control module reg
|
||||
* @dev: the control module device
|
||||
* @on: 0 or 1, based on powering on or off the PHY
|
||||
*/
|
||||
void omap_control_usb_phy_power(struct device *dev, int on)
|
||||
void omap_control_phy_power(struct device *dev, int on)
|
||||
{
|
||||
u32 val;
|
||||
unsigned long rate;
|
||||
struct omap_control_usb *control_usb;
|
||||
struct omap_control_phy *control_phy;
|
||||
|
||||
if (IS_ERR(dev) || !dev) {
|
||||
pr_err("%s: invalid device\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
control_usb = dev_get_drvdata(dev);
|
||||
if (!control_usb) {
|
||||
dev_err(dev, "%s: invalid control usb device\n", __func__);
|
||||
control_phy = dev_get_drvdata(dev);
|
||||
if (!control_phy) {
|
||||
dev_err(dev, "%s: invalid control phy device\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
|
||||
if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
|
||||
return;
|
||||
|
||||
val = readl(control_usb->power);
|
||||
val = readl(control_phy->power);
|
||||
|
||||
switch (control_usb->type) {
|
||||
switch (control_phy->type) {
|
||||
case OMAP_CTRL_TYPE_USB2:
|
||||
if (on)
|
||||
val &= ~OMAP_CTRL_DEV_PHY_PD;
|
||||
|
@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on)
|
|||
break;
|
||||
|
||||
case OMAP_CTRL_TYPE_PIPE3:
|
||||
rate = clk_get_rate(control_usb->sys_clk);
|
||||
rate = clk_get_rate(control_phy->sys_clk);
|
||||
rate = rate/1000000;
|
||||
|
||||
if (on) {
|
||||
val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
|
||||
OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
|
||||
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
|
||||
OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
|
||||
val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
|
||||
val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
|
||||
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
||||
val |= rate <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
|
||||
} else {
|
||||
val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
|
||||
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
|
||||
OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
|
||||
val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
|
||||
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
||||
}
|
||||
break;
|
||||
|
||||
|
@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on)
|
|||
break;
|
||||
default:
|
||||
dev_err(dev, "%s: type %d not recognized\n",
|
||||
__func__, control_usb->type);
|
||||
__func__, control_phy->type);
|
||||
break;
|
||||
}
|
||||
|
||||
writel(val, control_usb->power);
|
||||
writel(val, control_phy->power);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
|
||||
EXPORT_SYMBOL_GPL(omap_control_phy_power);
|
||||
|
||||
/**
|
||||
* omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
|
||||
* @ctrl_usb: struct omap_control_usb *
|
||||
* @ctrl_phy: struct omap_control_phy *
|
||||
*
|
||||
* Writes to the mailbox register to notify the usb core that a usb
|
||||
* device has been connected.
|
||||
*/
|
||||
static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb)
|
||||
static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = readl(ctrl_usb->otghs_control);
|
||||
val = readl(ctrl_phy->otghs_control);
|
||||
val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
|
||||
val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
|
||||
writel(val, ctrl_usb->otghs_control);
|
||||
writel(val, ctrl_phy->otghs_control);
|
||||
}
|
||||
|
||||
/**
|
||||
* omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
|
||||
* impedance
|
||||
* @ctrl_usb: struct omap_control_usb *
|
||||
* @ctrl_phy: struct omap_control_phy *
|
||||
*
|
||||
* Writes to the mailbox register to notify the usb core that it has been
|
||||
* connected to a usb host.
|
||||
*/
|
||||
static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb)
|
||||
static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = readl(ctrl_usb->otghs_control);
|
||||
val = readl(ctrl_phy->otghs_control);
|
||||
val &= ~OMAP_CTRL_DEV_SESSEND;
|
||||
val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
|
||||
OMAP_CTRL_DEV_VBUSVALID;
|
||||
writel(val, ctrl_usb->otghs_control);
|
||||
writel(val, ctrl_phy->otghs_control);
|
||||
}
|
||||
|
||||
/**
|
||||
* omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
|
||||
* impedance
|
||||
* @ctrl_usb: struct omap_control_usb *
|
||||
* @ctrl_phy: struct omap_control_phy *
|
||||
*
|
||||
* Writes to the mailbox register to notify the usb core it's now in
|
||||
* disconnected state.
|
||||
*/
|
||||
static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
|
||||
static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = readl(ctrl_usb->otghs_control);
|
||||
val = readl(ctrl_phy->otghs_control);
|
||||
val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
|
||||
val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
|
||||
writel(val, ctrl_usb->otghs_control);
|
||||
writel(val, ctrl_phy->otghs_control);
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
|
|||
void omap_control_usb_set_mode(struct device *dev,
|
||||
enum omap_control_usb_mode mode)
|
||||
{
|
||||
struct omap_control_usb *ctrl_usb;
|
||||
struct omap_control_phy *ctrl_phy;
|
||||
|
||||
if (IS_ERR(dev) || !dev)
|
||||
return;
|
||||
|
||||
ctrl_usb = dev_get_drvdata(dev);
|
||||
ctrl_phy = dev_get_drvdata(dev);
|
||||
|
||||
if (!ctrl_usb) {
|
||||
dev_err(dev, "Invalid control usb device\n");
|
||||
if (!ctrl_phy) {
|
||||
dev_err(dev, "Invalid control phy device\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
|
||||
if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
|
||||
return;
|
||||
|
||||
switch (mode) {
|
||||
case USB_MODE_HOST:
|
||||
omap_control_usb_host_mode(ctrl_usb);
|
||||
omap_control_usb_host_mode(ctrl_phy);
|
||||
break;
|
||||
case USB_MODE_DEVICE:
|
||||
omap_control_usb_device_mode(ctrl_usb);
|
||||
omap_control_usb_device_mode(ctrl_phy);
|
||||
break;
|
||||
case USB_MODE_DISCONNECT:
|
||||
omap_control_usb_set_sessionend(ctrl_usb);
|
||||
omap_control_usb_set_sessionend(ctrl_phy);
|
||||
break;
|
||||
default:
|
||||
dev_vdbg(dev, "invalid omap control usb mode\n");
|
||||
|
@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
|
|||
|
||||
#ifdef CONFIG_OF
|
||||
|
||||
static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
|
||||
static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
|
||||
static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
|
||||
static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
|
||||
static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
|
||||
static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
|
||||
static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
|
||||
static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
|
||||
static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
|
||||
static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
|
||||
|
||||
static const struct of_device_id omap_control_usb_id_table[] = {
|
||||
static const struct of_device_id omap_control_phy_id_table[] = {
|
||||
{
|
||||
.compatible = "ti,control-phy-otghs",
|
||||
.data = &otghs_data,
|
||||
|
@ -236,84 +237,84 @@ static const struct of_device_id omap_control_usb_id_table[] = {
|
|||
},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
|
||||
MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
|
||||
#endif
|
||||
|
||||
|
||||
static int omap_control_usb_probe(struct platform_device *pdev)
|
||||
static int omap_control_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
const struct of_device_id *of_id;
|
||||
struct omap_control_usb *control_usb;
|
||||
struct omap_control_phy *control_phy;
|
||||
|
||||
of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
|
||||
of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
|
||||
&pdev->dev);
|
||||
if (!of_id)
|
||||
return -EINVAL;
|
||||
|
||||
control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
|
||||
control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
|
||||
GFP_KERNEL);
|
||||
if (!control_usb) {
|
||||
dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
|
||||
if (!control_phy) {
|
||||
dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
control_usb->dev = &pdev->dev;
|
||||
control_usb->type = *(enum omap_control_usb_type *)of_id->data;
|
||||
control_phy->dev = &pdev->dev;
|
||||
control_phy->type = *(enum omap_control_phy_type *)of_id->data;
|
||||
|
||||
if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
|
||||
if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
"otghs_control");
|
||||
control_usb->otghs_control = devm_ioremap_resource(
|
||||
control_phy->otghs_control = devm_ioremap_resource(
|
||||
&pdev->dev, res);
|
||||
if (IS_ERR(control_usb->otghs_control))
|
||||
return PTR_ERR(control_usb->otghs_control);
|
||||
if (IS_ERR(control_phy->otghs_control))
|
||||
return PTR_ERR(control_phy->otghs_control);
|
||||
} else {
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
"power");
|
||||
control_usb->power = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(control_usb->power)) {
|
||||
control_phy->power = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(control_phy->power)) {
|
||||
dev_err(&pdev->dev, "Couldn't get power register\n");
|
||||
return PTR_ERR(control_usb->power);
|
||||
return PTR_ERR(control_phy->power);
|
||||
}
|
||||
}
|
||||
|
||||
if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
|
||||
control_usb->sys_clk = devm_clk_get(control_usb->dev,
|
||||
if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
|
||||
control_phy->sys_clk = devm_clk_get(control_phy->dev,
|
||||
"sys_clkin");
|
||||
if (IS_ERR(control_usb->sys_clk)) {
|
||||
if (IS_ERR(control_phy->sys_clk)) {
|
||||
pr_err("%s: unable to get sys_clkin\n", __func__);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
dev_set_drvdata(control_usb->dev, control_usb);
|
||||
dev_set_drvdata(control_phy->dev, control_phy);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver omap_control_usb_driver = {
|
||||
.probe = omap_control_usb_probe,
|
||||
static struct platform_driver omap_control_phy_driver = {
|
||||
.probe = omap_control_phy_probe,
|
||||
.driver = {
|
||||
.name = "omap-control-usb",
|
||||
.name = "omap-control-phy",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(omap_control_usb_id_table),
|
||||
.of_match_table = of_match_ptr(omap_control_phy_id_table),
|
||||
},
|
||||
};
|
||||
|
||||
static int __init omap_control_usb_init(void)
|
||||
static int __init omap_control_phy_init(void)
|
||||
{
|
||||
return platform_driver_register(&omap_control_usb_driver);
|
||||
return platform_driver_register(&omap_control_phy_driver);
|
||||
}
|
||||
subsys_initcall(omap_control_usb_init);
|
||||
subsys_initcall(omap_control_phy_init);
|
||||
|
||||
static void __exit omap_control_usb_exit(void)
|
||||
static void __exit omap_control_phy_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&omap_control_usb_driver);
|
||||
platform_driver_unregister(&omap_control_phy_driver);
|
||||
}
|
||||
module_exit(omap_control_usb_exit);
|
||||
module_exit(omap_control_phy_exit);
|
||||
|
||||
MODULE_ALIAS("platform: omap_control_usb");
|
||||
MODULE_ALIAS("platform: omap_control_phy");
|
||||
MODULE_AUTHOR("Texas Instruments Inc.");
|
||||
MODULE_DESCRIPTION("OMAP Control Module USB Driver");
|
||||
MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
|
@ -27,7 +27,7 @@
|
|||
#include <linux/err.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/usb/omap_control_usb.h>
|
||||
#include <linux/phy/omap_control_phy.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
|
@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x)
|
|||
{
|
||||
struct omap_usb *phy = phy_get_drvdata(x);
|
||||
|
||||
omap_control_usb_phy_power(phy->control_dev, 0);
|
||||
omap_control_phy_power(phy->control_dev, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x)
|
|||
{
|
||||
struct omap_usb *phy = phy_get_drvdata(x);
|
||||
|
||||
omap_control_usb_phy_power(phy->control_dev, 1);
|
||||
omap_control_phy_power(phy->control_dev, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
phy->control_dev = &control_pdev->dev;
|
||||
omap_control_usb_phy_power(phy->control_dev, 0);
|
||||
omap_control_phy_power(phy->control_dev, 0);
|
||||
|
||||
otg->set_host = omap_usb_set_host;
|
||||
otg->set_peripheral = omap_usb_set_peripheral;
|
||||
|
|
|
@ -26,7 +26,7 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/usb/omap_control_usb.h>
|
||||
#include <linux/phy/omap_control_phy.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#define PLL_STATUS 0x00000004
|
||||
|
@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x)
|
|||
return -EBUSY;
|
||||
}
|
||||
|
||||
omap_control_usb_phy_power(phy->control_dev, 0);
|
||||
omap_control_phy_power(phy->control_dev, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x)
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
omap_control_usb_phy_power(phy->control_dev, 1);
|
||||
omap_control_phy_power(phy->control_dev, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
|
||||
phy->control_dev = &control_pdev->dev;
|
||||
|
||||
omap_control_usb_phy_power(phy->control_dev, 0);
|
||||
omap_control_phy_power(phy->control_dev, 0);
|
||||
|
||||
platform_set_drvdata(pdev, phy);
|
||||
pm_runtime_enable(phy->dev);
|
||||
|
|
|
@ -37,7 +37,7 @@
|
|||
#include <linux/err.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/usb/musb-omap.h>
|
||||
#include <linux/usb/omap_control_usb.h>
|
||||
#include <linux/phy/omap_control_phy.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include "musb_core.h"
|
||||
|
|
|
@ -75,16 +75,6 @@ config NOP_USB_XCEIV
|
|||
built-in with usb ip or which are autonomous and doesn't require any
|
||||
phy programming such as ISP1x04 etc.
|
||||
|
||||
config OMAP_CONTROL_USB
|
||||
tristate "OMAP CONTROL USB Driver"
|
||||
depends on ARCH_OMAP2PLUS || COMPILE_TEST
|
||||
help
|
||||
Enable this to add support for the USB part present in the control
|
||||
module. This driver has API to power on the USB2 PHY and to write to
|
||||
the mailbox. The mailbox is present only in omap4 and the register to
|
||||
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
|
||||
additional register to power on USB3 PHY.
|
||||
|
||||
config AM335X_CONTROL_USB
|
||||
tristate
|
||||
|
||||
|
|
|
@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
|
|||
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
|
||||
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
|
||||
obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
|
||||
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
|
||||
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
|
||||
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
|
||||
obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* omap_control_usb.h - Header file for the USB part of control module.
|
||||
* omap_control_phy.h - Header file for the PHY part of control module.
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
|
@ -16,10 +16,10 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#ifndef __OMAP_CONTROL_USB_H__
|
||||
#define __OMAP_CONTROL_USB_H__
|
||||
#ifndef __OMAP_CONTROL_PHY_H__
|
||||
#define __OMAP_CONTROL_PHY_H__
|
||||
|
||||
enum omap_control_usb_type {
|
||||
enum omap_control_phy_type {
|
||||
OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
|
||||
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
|
||||
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
|
||||
|
@ -27,7 +27,7 @@ enum omap_control_usb_type {
|
|||
OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
|
||||
};
|
||||
|
||||
struct omap_control_usb {
|
||||
struct omap_control_phy {
|
||||
struct device *dev;
|
||||
|
||||
u32 __iomem *otghs_control;
|
||||
|
@ -36,7 +36,7 @@ struct omap_control_usb {
|
|||
|
||||
struct clk *sys_clk;
|
||||
|
||||
enum omap_control_usb_type type;
|
||||
enum omap_control_phy_type type;
|
||||
};
|
||||
|
||||
enum omap_control_usb_mode {
|
||||
|
@ -54,14 +54,14 @@ enum omap_control_usb_mode {
|
|||
#define OMAP_CTRL_DEV_SESSEND BIT(3)
|
||||
#define OMAP_CTRL_DEV_IDDIG BIT(4)
|
||||
|
||||
#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000
|
||||
#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
|
||||
|
||||
#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
||||
#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
|
||||
|
||||
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
|
||||
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
|
||||
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
|
||||
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
|
||||
|
||||
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
|
||||
|
||||
|
@ -70,13 +70,13 @@ enum omap_control_usb_mode {
|
|||
#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
|
||||
#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
|
||||
|
||||
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
|
||||
extern void omap_control_usb_phy_power(struct device *dev, int on);
|
||||
extern void omap_control_usb_set_mode(struct device *dev,
|
||||
#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
|
||||
void omap_control_phy_power(struct device *dev, int on);
|
||||
void omap_control_usb_set_mode(struct device *dev,
|
||||
enum omap_control_usb_mode mode);
|
||||
#else
|
||||
|
||||
static inline void omap_control_usb_phy_power(struct device *dev, int on)
|
||||
static inline void omap_control_phy_power(struct device *dev, int on)
|
||||
{
|
||||
}
|
||||
|
||||
|
@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev,
|
|||
}
|
||||
#endif
|
||||
|
||||
#endif /* __OMAP_CONTROL_USB_H__ */
|
||||
#endif /* __OMAP_CONTROL_PHY_H__ */
|
Loading…
Reference in a new issue