ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Currently GPIO4 is hardcoded to output the pll-lock signal. Unfortunately this is after the pll-out GPIO is configured which is selectable in the device tree. Therefore it is not possible to use GPIO4 for pll-out. Therefore this patch removes the configuration of GPIO4. Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
c517d838eb
commit
14f0413ce3
|
@ -1156,25 +1156,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
|
||||||
ret, pcm512x->pll_out);
|
ret, pcm512x->pll_out);
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
gpio = PCM512x_G1OE << (4 - 1);
|
|
||||||
ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN,
|
|
||||||
gpio, gpio);
|
|
||||||
if (ret != 0) {
|
|
||||||
dev_err(codec->dev, "Failed to enable gpio %d: %d\n",
|
|
||||||
4, ret);
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
gpio = PCM512x_GPIO_OUTPUT_1 + 4 - 1;
|
|
||||||
ret = regmap_update_bits(pcm512x->regmap, gpio,
|
|
||||||
PCM512x_GxSL, PCM512x_GxSL_PLLLK);
|
|
||||||
if (ret != 0) {
|
|
||||||
dev_err(codec->dev,
|
|
||||||
"Failed to output pll lock on %d: %d\n",
|
|
||||||
ret, 4);
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,
|
||||||
|
|
Loading…
Reference in a new issue