redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge remote-tracking branches 'spi/topic/omap-uwire', 'spi/topic/omap100k', 'spi/topic/omap2', 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rspi' and 'spi/topic/s3c24xx' into spi-next

wifi-calibration
Mark Brown 2014-03-30 00:51:27 +00:00
parent 6e07b9179a cbab80464f d1c18caace aca0924b48 cd2ac0c0cd 84a5dc41f6 00cce74d08 490c97747d 3806037120
commit 1752368064
15 changed files with 1740 additions and 533 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
Documentation/devicetree/bindings/spi/qcom,spi-qup.txt 100644
View File

@ -0,0 +1,85 @@
Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
The QUP core is an AHB slave that provides a common data path (an output FIFO
and an input FIFO) for serial peripheral interface (SPI) mini-core.
SPI in master mode supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol variants.
Required properties:
- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
- reg: Should contain base register location and length
- interrupts: Interrupt number used by this controller
- clocks: Should contain the core clock and the AHB clock.
- clock-names: Should be "core" for the core clock and "iface" for the
AHB clock.
- #address-cells: Number of cells required to define a chip select
address on the SPI bus. Should be set to 1.
- #size-cells: Should be zero.
Optional properties:
- spi-max-frequency: Specifies maximum SPI clock frequency,
Units - Hz. Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
Example:
spi_8: spi@f9964000 { /* BLSP2 QUP2 */
compatible = "qcom,spi-qup-v2";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xf9964000 0x1000>;
interrupts = <0 102 0>;
spi-max-frequency = <19200000>;
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&spi8_default>;
device@0 {
compatible = "arm,pl022-dummy";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>; /* Chip select 0 */
spi-max-frequency = <19200000>;
spi-cpol;
};
device@1 {
compatible = "arm,pl022-dummy";
#address-cells = <1>;
#size-cells = <1>;
reg = <1>; /* Chip select 1 */
spi-max-frequency = <9600000>;
spi-cpha;
};
device@2 {
compatible = "arm,pl022-dummy";
#address-cells = <1>;
#size-cells = <1>;
reg = <2>; /* Chip select 2 */
spi-max-frequency = <19200000>;
spi-cpol;
spi-cpha;
};
device@3 {
compatible = "arm,pl022-dummy";
#address-cells = <1>;
#size-cells = <1>;
reg = <3>; /* Chip select 3 */
spi-max-frequency = <19200000>;
spi-cpol;
spi-cpha;
spi-cs-high;
};
};

61
Documentation/devicetree/bindings/spi/spi-rspi.txt 100644
View File

@ -0,0 +1,61 @@
Device tree configuration for Renesas RSPI/QSPI driver
Required properties:
- compatible : For Renesas Serial Peripheral Interface on legacy SH:
"renesas,rspi-<soctype>", "renesas,rspi" as fallback.
For Renesas Serial Peripheral Interface on RZ/A1H:
"renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
For Quad Serial Peripheral Interface on R-Car Gen2:
"renesas,qspi-<soctype>", "renesas,qspi" as fallback.
Examples with soctypes are:
- "renesas,rspi-sh7757" (SH)
- "renesas,rspi-r7s72100" (RZ/A1H)
- "renesas,qspi-r8a7790" (R-Car H2)
- "renesas,qspi-r8a7791" (R-Car M2)
- reg : Address start and address range size of the device
- interrupts : A list of interrupt-specifiers, one for each entry in
interrupt-names.
If interrupt-names is not present, an interrupt specifier
for a single muxed interrupt.
- interrupt-names : A list of interrupt names. Should contain (if present):
- "error" for SPEI,
- "rx" for SPRI,
- "tx" to SPTI,
- "mux" for a single muxed interrupt.
- interrupt-parent : The phandle for the interrupt controller that
services interrupts for this device.
- num-cs : Number of chip selects. Some RSPI cores have more than 1.
- #address-cells : Must be <1>
- #size-cells : Must be <0>
Optional properties:
- clocks : Must contain a reference to the functional clock.
Pinctrl properties might be needed, too. See
Documentation/devicetree/bindings/pinctrl/renesas,*.
Examples:
spi0: spi@e800c800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800c800 0x24>;
interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
<0 239 IRQ_TYPE_LEVEL_HIGH>,
<0 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
interrupt-parent = <&gic>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
spi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
};

3
drivers/base/power/Makefile
View File

@ -1,6 +1,5 @@
obj-$(CONFIG_PM) += sysfs.o generic_ops.o common.o qos.o
obj-$(CONFIG_PM) += sysfs.o generic_ops.o common.o qos.o runtime.o
obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
obj-$(CONFIG_PM_OPP) += opp.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += domain.o domain_governor.o

162
drivers/base/power/runtime.c
View File

@ -13,6 +13,43 @@
#include <trace/events/rpm.h>
#include "power.h"
#define RPM_GET_CALLBACK(dev, cb) \
({ \
int (*__rpm_cb)(struct device *__d); \
\
if (dev->pm_domain) \
__rpm_cb = dev->pm_domain->ops.cb; \
else if (dev->type && dev->type->pm) \
__rpm_cb = dev->type->pm->cb; \
else if (dev->class && dev->class->pm) \
__rpm_cb = dev->class->pm->cb; \
else if (dev->bus && dev->bus->pm) \
__rpm_cb = dev->bus->pm->cb; \
else \
__rpm_cb = NULL; \
\
if (!__rpm_cb && dev->driver && dev->driver->pm) \
__rpm_cb = dev->driver->pm->cb; \
\
__rpm_cb; \
})
static int (*rpm_get_suspend_cb(struct device *dev))(struct device *)
{
return RPM_GET_CALLBACK(dev, runtime_suspend);
}
static int (*rpm_get_resume_cb(struct device *dev))(struct device *)
{
return RPM_GET_CALLBACK(dev, runtime_resume);
}
#ifdef CONFIG_PM_RUNTIME
static int (*rpm_get_idle_cb(struct device *dev))(struct device *)
{
return RPM_GET_CALLBACK(dev, runtime_idle);
}
static int rpm_resume(struct device *dev, int rpmflags);
static int rpm_suspend(struct device *dev, int rpmflags);
@ -310,19 +347,7 @@ static int rpm_idle(struct device *dev, int rpmflags)
dev->power.idle_notification = true;
if (dev->pm_domain)
callback = dev->pm_domain->ops.runtime_idle;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_idle;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_idle;
else if (dev->bus && dev->bus->pm)
callback = dev->bus->pm->runtime_idle;
else
callback = NULL;
if (!callback && dev->driver && dev->driver->pm)
callback = dev->driver->pm->runtime_idle;
callback = rpm_get_idle_cb(dev);
if (callback)
retval = __rpm_callback(callback, dev);
@ -492,19 +517,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_SUSPENDING);
if (dev->pm_domain)
callback = dev->pm_domain->ops.runtime_suspend;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_suspend;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_suspend;
else if (dev->bus && dev->bus->pm)
callback = dev->bus->pm->runtime_suspend;
else
callback = NULL;
if (!callback && dev->driver && dev->driver->pm)
callback = dev->driver->pm->runtime_suspend;
callback = rpm_get_suspend_cb(dev);
retval = rpm_callback(callback, dev);
if (retval)
@ -724,19 +737,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_RESUMING);
if (dev->pm_domain)
callback = dev->pm_domain->ops.runtime_resume;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_resume;
else if (dev->class && dev->class->pm)
callback = dev->class->pm->runtime_resume;
else if (dev->bus && dev->bus->pm)
callback = dev->bus->pm->runtime_resume;
else
callback = NULL;
if (!callback && dev->driver && dev->driver->pm)
callback = dev->driver->pm->runtime_resume;
callback = rpm_get_resume_cb(dev);
retval = rpm_callback(callback, dev);
if (retval) {
@ -1401,3 +1402,86 @@ void pm_runtime_remove(struct device *dev)
if (dev->power.irq_safe && dev->parent)
pm_runtime_put(dev->parent);
}
#endif
/**
* pm_runtime_force_suspend - Force a device into suspend state if needed.
* @dev: Device to suspend.
*
* Disable runtime PM so we safely can check the device's runtime PM status and
* if it is active, invoke it's .runtime_suspend callback to bring it into
* suspend state. Keep runtime PM disabled to preserve the state unless we
* encounter errors.
*
* Typically this function may be invoked from a system suspend callback to make
* sure the device is put into low power state.
*/
int pm_runtime_force_suspend(struct device *dev)
{
int (*callback)(struct device *);
int ret = 0;
pm_runtime_disable(dev);
/*
* Note that pm_runtime_status_suspended() returns false while
* !CONFIG_PM_RUNTIME, which means the device will be put into low
* power state.
*/
if (pm_runtime_status_suspended(dev))
return 0;
callback = rpm_get_suspend_cb(dev);
if (!callback) {
ret = -ENOSYS;
goto err;
}
ret = callback(dev);
if (ret)
goto err;
pm_runtime_set_suspended(dev);
return 0;
err:
pm_runtime_enable(dev);
return ret;
}
EXPORT_SYMBOL_GPL(pm_runtime_force_suspend);
/**
* pm_runtime_force_resume - Force a device into resume state.
* @dev: Device to resume.
*
* Prior invoking this function we expect the user to have brought the device
* into low power state by a call to pm_runtime_force_suspend(). Here we reverse
* those actions and brings the device into full power. We update the runtime PM
* status and re-enables runtime PM.
*
* Typically this function may be invoked from a system resume callback to make
* sure the device is put into full power state.
*/
int pm_runtime_force_resume(struct device *dev)
{
int (*callback)(struct device *);
int ret = 0;
callback = rpm_get_resume_cb(dev);
if (!callback) {
ret = -ENOSYS;
goto out;
}
ret = callback(dev);
if (ret)
goto out;
pm_runtime_set_active(dev);
pm_runtime_mark_last_busy(dev);
out:
pm_runtime_enable(dev);
return ret;
}
EXPORT_SYMBOL_GPL(pm_runtime_force_resume);

15
drivers/spi/Kconfig
View File

@ -307,7 +307,7 @@ config SPI_OMAP_UWIRE
config SPI_OMAP24XX
tristate "McSPI driver for OMAP"
depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SH
depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH
depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
SPI master controller for OMAP24XX and later Multichannel SPI
@ -381,6 +381,19 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI and QSPI blocks.
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
depends on ARCH_MSM_DT || (ARM && COMPILE_TEST)
help
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
provides a common data path (an output FIFO and an input FIFO)
for serial peripheral interface (SPI) mini-core. SPI in master
mode supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol variants.
This driver can also be built as a module. If so, the module
will be called spi_qup.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX

1
drivers/spi/Makefile
View File

@ -59,6 +59,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o
spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o

52
drivers/spi/spi-omap-100k.c
View File

@ -83,15 +83,11 @@
#define SPI_SHUTDOWN 1
struct omap1_spi100k {
struct spi_master *master;
struct clk *ick;
struct clk *fck;
/* Virtual base address of the controller */
void __iomem *base;
/* State of the SPI */
unsigned int state;
};
struct omap1_spi100k_cs {
@ -99,13 +95,6 @@ struct omap1_spi100k_cs {
int word_len;
};
#define MOD_REG_BIT(val, mask, set) do { \
if (set) \
val |= mask; \
else \
val &= ~mask; \
} while (0)
static void spi100k_enable_clock(struct spi_master *master)
{
unsigned int val;
@ -139,7 +128,7 @@ static void spi100k_write_data(struct spi_master *master, int len, int data)
}
spi100k_enable_clock(master);
writew( data , spi100k->base + SPI_TX_MSB);
writew(data , spi100k->base + SPI_TX_MSB);
writew(SPI_CTRL_SEN(0) |
SPI_CTRL_WORD_SIZE(len) |
@ -147,7 +136,8 @@ static void spi100k_write_data(struct spi_master *master, int len, int data)
spi100k->base + SPI_CTRL);
/* Wait for bit ack send change */
while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE);
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE)
;
udelay(1000);
spi100k_disable_clock(master);
@ -155,7 +145,7 @@ static void spi100k_write_data(struct spi_master *master, int len, int data)
static int spi100k_read_data(struct spi_master *master, int len)
{
int dataH,dataL;
int dataH, dataL;
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
/* Always do at least 16 bits */
@ -168,7 +158,8 @@ static int spi100k_read_data(struct spi_master *master, int len)
SPI_CTRL_RD,
spi100k->base + SPI_CTRL);
while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD);
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD)
;
udelay(1000);
dataL = readw(spi100k->base + SPI_RX_LSB);
@ -204,12 +195,10 @@ static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
static unsigned
omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
{
struct omap1_spi100k *spi100k;
struct omap1_spi100k_cs *cs = spi->controller_state;
unsigned int count, c;
int word_len;
spi100k = spi_master_get_devdata(spi->master);
count = xfer->len;
c = count;
word_len = cs->word_len;
@ -221,12 +210,12 @@ omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
rx = xfer->rx_buf;
tx = xfer->tx_buf;
do {
c-=1;
c -= 1;
if (xfer->tx_buf != NULL)
spi100k_write_data(spi->master, word_len, *tx++);
if (xfer->rx_buf != NULL)
*rx++ = spi100k_read_data(spi->master, word_len);
} while(c);
} while (c);
} else if (word_len <= 16) {
u16 *rx;
const u16 *tx;
@ -234,12 +223,12 @@ omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
rx = xfer->rx_buf;
tx = xfer->tx_buf;
do {
c-=2;
c -= 2;
if (xfer->tx_buf != NULL)
spi100k_write_data(spi->master,word_len, *tx++);
spi100k_write_data(spi->master, word_len, *tx++);
if (xfer->rx_buf != NULL)
*rx++ = spi100k_read_data(spi->master,word_len);
} while(c);
*rx++ = spi100k_read_data(spi->master, word_len);
} while (c);
} else if (word_len <= 32) {
u32 *rx;
const u32 *tx;
@ -247,12 +236,12 @@ omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
rx = xfer->rx_buf;
tx = xfer->tx_buf;
do {
c-=4;
c -= 4;
if (xfer->tx_buf != NULL)
spi100k_write_data(spi->master,word_len, *tx);
spi100k_write_data(spi->master, word_len, *tx);
if (xfer->rx_buf != NULL)
*rx = spi100k_read_data(spi->master,word_len);
} while(c);
*rx = spi100k_read_data(spi->master, word_len);
} while (c);
}
return count - c;
}
@ -294,7 +283,7 @@ static int omap1_spi100k_setup(struct spi_device *spi)
spi100k = spi_master_get_devdata(spi->master);
if (!cs) {
cs = kzalloc(sizeof *cs, GFP_KERNEL);
cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = spi100k->base + spi->chip_select * 0x14;
@ -411,14 +400,14 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
if (!pdev->id)
return -EINVAL;
master = spi_alloc_master(&pdev->dev, sizeof *spi100k);
master = spi_alloc_master(&pdev->dev, sizeof(*spi100k));
if (master == NULL) {
dev_dbg(&pdev->dev, "master allocation failed\n");
return -ENOMEM;
}
if (pdev->id != -1)
master->bus_num = pdev->id;
master->bus_num = pdev->id;
master->setup = omap1_spi100k_setup;
master->transfer_one_message = omap1_spi100k_transfer_one_message;
@ -434,7 +423,6 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
spi100k = spi_master_get_devdata(master);
spi100k->master = master;
/*
* The memory region base address is taken as the platform_data.
@ -461,8 +449,6 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
if (status < 0)
goto err;
spi100k->state = SPI_RUNNING;
return status;
err:

23
drivers/spi/spi-omap-uwire.c
View File

@ -99,7 +99,6 @@ struct uwire_spi {
};
struct uwire_state {
unsigned bits_per_word;
unsigned div1_idx;
};
@ -210,9 +209,8 @@ static void uwire_chipselect(struct spi_device *spi, int value)
static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
{
struct uwire_state *ust = spi->controller_state;
unsigned len = t->len;
unsigned bits = ust->bits_per_word;
unsigned bits = t->bits_per_word ? : spi->bits_per_word;
unsigned bytes;
u16 val, w;
int status = 0;
@ -220,10 +218,6 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
if (!t->tx_buf && !t->rx_buf)
return 0;
/* Microwire doesn't read and write concurrently */
if (t->tx_buf && t->rx_buf)
return -EPERM;
w = spi->chip_select << 10;
w |= CS_CMD;
@ -322,7 +316,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
struct uwire_state *ust = spi->controller_state;
struct uwire_spi *uwire;
unsigned flags = 0;
unsigned bits;
unsigned hz;
unsigned long rate;
int div1_idx;
@ -332,17 +325,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
uwire = spi_master_get_devdata(spi->master);
bits = spi->bits_per_word;
if (t != NULL && t->bits_per_word)
bits = t->bits_per_word;
if (bits > 16) {
pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits);
status = -ENODEV;
goto done;
}
ust->bits_per_word = bits;
/* mode 0..3, clock inverted separately;
* standard nCS signaling;
* don't treat DI=high as "not ready"
@ -496,6 +478,7 @@ static int uwire_probe(struct platform_device *pdev)
status = PTR_ERR(uwire->ck);
dev_dbg(&pdev->dev, "no functional clock?\n");
spi_master_put(master);
iounmap(uwire_base);
return status;
}
clk_enable(uwire->ck);
@ -509,7 +492,7 @@ static int uwire_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
master->flags = SPI_MASTER_HALF_DUPLEX;
master->bus_num = 2; /* "official" */

64
drivers/spi/spi-omap2-mcspi.c
View File

@ -44,6 +44,7 @@
#include <linux/platform_data/spi-omap2-mcspi.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
#define OMAP2_MCSPI_MAX_DIVIDER 4096
#define OMAP2_MCSPI_MAX_FIFODEPTH 64
#define OMAP2_MCSPI_MAX_FIFOWCNT 0xFFFF
#define SPI_AUTOSUSPEND_TIMEOUT 2000
@ -88,6 +89,7 @@
#define OMAP2_MCSPI_CHCONF_FORCE BIT(20)
#define OMAP2_MCSPI_CHCONF_FFET BIT(27)
#define OMAP2_MCSPI_CHCONF_FFER BIT(28)
#define OMAP2_MCSPI_CHCONF_CLKG BIT(29)
#define OMAP2_MCSPI_CHSTAT_RXS BIT(0)
#define OMAP2_MCSPI_CHSTAT_TXS BIT(1)
@ -95,6 +97,7 @@
#define OMAP2_MCSPI_CHSTAT_TXFFE BIT(3)
#define OMAP2_MCSPI_CHCTRL_EN BIT(0)
#define OMAP2_MCSPI_CHCTRL_EXTCLK_MASK (0xff << 8)
#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0)
@ -148,7 +151,7 @@ struct omap2_mcspi_cs {
int word_len;
struct list_head node;
/* Context save and restore shadow register */
u32 chconf0;
u32 chconf0, chctrl0;
};
static inline void mcspi_write_reg(struct spi_master *master,
@ -229,10 +232,16 @@ static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
{
struct omap2_mcspi_cs *cs = spi->controller_state;
u32 l;
l = enable ? OMAP2_MCSPI_CHCTRL_EN : 0;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, l);
l = cs->chctrl0;
if (enable)
l |= OMAP2_MCSPI_CHCTRL_EN;
else
l &= ~OMAP2_MCSPI_CHCTRL_EN;
cs->chctrl0 = l;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
/* Flash post-writes */
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
}
@ -839,7 +848,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
struct spi_master *spi_cntrl;
u32 l = 0, div = 0;
u32 l = 0, clkd = 0, div, extclk = 0, clkg = 0;
u8 word_len = spi->bits_per_word;
u32 speed_hz = spi->max_speed_hz;
@ -855,7 +864,17 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
speed_hz = t->speed_hz;
speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ);
div = omap2_mcspi_calc_divisor(speed_hz);
if (speed_hz < (OMAP2_MCSPI_MAX_FREQ / OMAP2_MCSPI_MAX_DIVIDER)) {
clkd = omap2_mcspi_calc_divisor(speed_hz);
speed_hz = OMAP2_MCSPI_MAX_FREQ >> clkd;
clkg = 0;
} else {
div = (OMAP2_MCSPI_MAX_FREQ + speed_hz - 1) / speed_hz;
speed_hz = OMAP2_MCSPI_MAX_FREQ / div;
clkd = (div - 1) & 0xf;
extclk = (div - 1) >> 4;
clkg = OMAP2_MCSPI_CHCONF_CLKG;
}
l = mcspi_cached_chconf0(spi);
@ -884,7 +903,16 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
/* set clock divisor */
l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK;
l |= div << 2;
l |= clkd << 2;
/* set clock granularity */
l &= ~OMAP2_MCSPI_CHCONF_CLKG;
l |= clkg;
if (clkg) {
cs->chctrl0 &= ~OMAP2_MCSPI_CHCTRL_EXTCLK_MASK;
cs->chctrl0 |= extclk << 8;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
}
/* set SPI mode 0..3 */
if (spi->mode & SPI_CPOL)
@ -899,7 +927,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
mcspi_write_chconf0(spi, l);
dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n",
OMAP2_MCSPI_MAX_FREQ >> div,
speed_hz,
(spi->mode & SPI_CPHA) ? "trailing" : "leading",
(spi->mode & SPI_CPOL) ? "inverted" : "normal");
@ -971,6 +999,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
cs->base = mcspi->base + spi->chip_select * 0x14;
cs->phys = mcspi->phys + spi->chip_select * 0x14;
cs->chconf0 = 0;
cs->chctrl0 = 0;
spi->controller_state = cs;
/* Link this to context save list */
list_add_tail(&cs->node, &ctx->cs);
@ -1056,12 +1085,15 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
status = -EINVAL;
break;
}
if (par_override || t->speed_hz || t->bits_per_word) {
if (par_override ||
(t->speed_hz != spi->max_speed_hz) ||
(t->bits_per_word != spi->bits_per_word)) {
par_override = 1;
status = omap2_mcspi_setup_transfer(spi, t);
if (status < 0)
break;
if (!t->speed_hz && !t->bits_per_word)
if (t->speed_hz == spi->max_speed_hz &&
t->bits_per_word == spi->bits_per_word)
par_override = 0;
}
if (cd && cd->cs_per_word) {
@ -1175,16 +1207,12 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
m->actual_length = 0;
m->status = 0;
/* reject invalid messages and transfers */
if (list_empty(&m->transfers))
return -EINVAL;
list_for_each_entry(t, &m->transfers, transfer_list) {
const void *tx_buf = t->tx_buf;
void *rx_buf = t->rx_buf;
unsigned len = t->len;
if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ
|| (len && !(rx_buf || tx_buf))) {
if ((len && !(rx_buf || tx_buf))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@ -1193,12 +1221,6 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
t->bits_per_word);
return -EINVAL;
}
if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
t->speed_hz,
OMAP2_MCSPI_MAX_FREQ >> 15);
return -EINVAL;
}
if (m->is_dma_mapped || len < DMA_MIN_BYTES)
continue;
@ -1310,6 +1332,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
master->transfer_one_message = omap2_mcspi_transfer_one_message;
master->cleanup = omap2_mcspi_cleanup;
master->dev.of_node = node;
master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15;
platform_set_drvdata(pdev, master);

79
drivers/spi/spi-orion.c
View File

@ -42,8 +42,6 @@
struct orion_spi {
struct spi_master *master;
void __iomem *base;
unsigned int max_speed;
unsigned int min_speed;
struct clk *clk;
};
@ -74,23 +72,6 @@ orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
writel(val, reg_addr);
}
static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size)
{
if (size == 16) {
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
ORION_SPI_IF_8_16_BIT_MODE);
} else if (size == 8) {
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
ORION_SPI_IF_8_16_BIT_MODE);
} else {
pr_debug("Bad bits per word value %d (only 8 or 16 are allowed).\n",
size);
return -EINVAL;
}
return 0;
}
static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
{
u32 tclk_hz;
@ -169,7 +150,14 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
if (rc)
return rc;
return orion_spi_set_transfer_size(orion_spi, bits_per_word);
if (bits_per_word == 16)
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
ORION_SPI_IF_8_16_BIT_MODE);
else
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
ORION_SPI_IF_8_16_BIT_MODE);
return 0;
}
static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable)
@ -259,11 +247,9 @@ orion_spi_write_read_16bit(struct spi_device *spi,
static unsigned int
orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
{
struct orion_spi *orion_spi;
unsigned int count;
int word_len;
orion_spi = spi_master_get_devdata(spi->master);
word_len = spi->bits_per_word;
count = xfer->len;
@ -309,27 +295,6 @@ static int orion_spi_transfer_one_message(struct spi_master *master,
goto msg_done;
list_for_each_entry(t, &m->transfers, transfer_list) {
/* make sure buffer length is even when working in 16
* bit mode*/
if ((t->bits_per_word == 16) && (t->len & 1)) {
dev_err(&spi->dev,
"message rejected : "
"odd data length %d while in 16 bit mode\n",
t->len);
status = -EIO;
goto msg_done;
}
if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
dev_err(&spi->dev,
"message rejected : "
"device min speed (%d Hz) exceeds "
"required transfer speed (%d Hz)\n",
orion_spi->min_speed, t->speed_hz);
status = -EIO;
goto msg_done;
}
if (par_override || t->speed_hz || t->bits_per_word) {
par_override = 1;
status = orion_spi_setup_transfer(spi, t);
@ -374,28 +339,6 @@ static int orion_spi_reset(struct orion_spi *orion_spi)
return 0;
}
static int orion_spi_setup(struct spi_device *spi)
{
struct orion_spi *orion_spi;
orion_spi = spi_master_get_devdata(spi->master);
if ((spi->max_speed_hz == 0)
|| (spi->max_speed_hz > orion_spi->max_speed))
spi->max_speed_hz = orion_spi->max_speed;
if (spi->max_speed_hz < orion_spi->min_speed) {
dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
spi->max_speed_hz);
return -EINVAL;
}
/*
* baudrate & width will be set orion_spi_setup_transfer
*/
return 0;
}
static int orion_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
@ -424,9 +367,9 @@ static int orion_spi_probe(struct platform_device *pdev)
/* we support only mode 0, and no options */
master->mode_bits = SPI_CPHA | SPI_CPOL;
master->setup = orion_spi_setup;
master->transfer_one_message = orion_spi_transfer_one_message;
master->num_chipselect = ORION_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
platform_set_drvdata(pdev, master);
@ -442,8 +385,8 @@ static int orion_spi_probe(struct platform_device *pdev)
clk_prepare(spi->clk);
clk_enable(spi->clk);
tclk_hz = clk_get_rate(spi->clk);
spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
master->max_speed_hz = DIV_ROUND_UP(tclk_hz, 4);
master->min_speed_hz = DIV_ROUND_UP(tclk_hz, 30);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi->base = devm_ioremap_resource(&pdev->dev, r);

75
drivers/spi/spi-pl022.c
View File

@ -2108,8 +2108,6 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int),
GFP_KERNEL);
pinctrl_pm_select_default_state(dev);
/*
* Bus Number Which has been Assigned to this SSP controller
* on this board
@ -2182,13 +2180,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
goto err_no_clk;
}
status = clk_prepare(pl022->clk);
if (status) {
dev_err(&adev->dev, "could not prepare SSP/SPI bus clock\n");
goto err_clk_prep;
}
status = clk_enable(pl022->clk);
status = clk_prepare_enable(pl022->clk);
if (status) {
dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
goto err_no_clk_en;
@ -2249,10 +2241,8 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
if (platform_info->enable_dma)
pl022_dma_remove(pl022);
err_no_irq:
clk_disable(pl022->clk);
clk_disable_unprepare(pl022->clk);
err_no_clk_en:
clk_unprepare(pl022->clk);
err_clk_prep:
err_no_clk:
err_no_ioremap:
amba_release_regions(adev);
@ -2280,42 +2270,13 @@ pl022_remove(struct amba_device *adev)
if (pl022->master_info->enable_dma)
pl022_dma_remove(pl022);
clk_disable(pl022->clk);
clk_unprepare(pl022->clk);
clk_disable_unprepare(pl022->clk);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
return 0;
}
#if defined(CONFIG_SUSPEND) || defined(CONFIG_PM_RUNTIME)
/*
* These two functions are used from both suspend/resume and
* the runtime counterparts to handle external resources like
* clocks, pins and regulators when going to sleep.
*/
static void pl022_suspend_resources(struct pl022 *pl022, bool runtime)
{
clk_disable(pl022->clk);
if (runtime)
pinctrl_pm_select_idle_state(&pl022->adev->dev);
else
pinctrl_pm_select_sleep_state(&pl022->adev->dev);
}
static void pl022_resume_resources(struct pl022 *pl022, bool runtime)
{
/* First go to the default state */
pinctrl_pm_select_default_state(&pl022->adev->dev);
if (!runtime)
/* Then let's idle the pins until the next transfer happens */
pinctrl_pm_select_idle_state(&pl022->adev->dev);
clk_enable(pl022->clk);
}
#endif
#ifdef CONFIG_SUSPEND
#ifdef CONFIG_PM_SLEEP
static int pl022_suspend(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
@ -2327,8 +2288,13 @@ static int pl022_suspend(struct device *dev)
return ret;
}
pm_runtime_get_sync(dev);
pl022_suspend_resources(pl022, false);
ret = pm_runtime_force_suspend(dev);
if (ret) {
spi_master_resume(pl022->master);
return ret;
}
pinctrl_pm_select_sleep_state(dev);
dev_dbg(dev, "suspended\n");
return 0;
@ -2339,8 +2305,9 @@ static int pl022_resume(struct device *dev)
struct pl022 *pl022 = dev_get_drvdata(dev);
int ret;
pl022_resume_resources(pl022, false);
pm_runtime_put(dev);
ret = pm_runtime_force_resume(dev);
if (ret)
dev_err(dev, "problem resuming\n");
/* Start the queue running */
ret = spi_master_resume(pl022->master);
@ -2351,14 +2318,16 @@ static int pl022_resume(struct device *dev)
return ret;
}
#endif /* CONFIG_PM */
#endif
#ifdef CONFIG_PM_RUNTIME
#ifdef CONFIG_PM
static int pl022_runtime_suspend(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
pl022_suspend_resources(pl022, true);
clk_disable_unprepare(pl022->clk);
pinctrl_pm_select_idle_state(dev);
return 0;
}
@ -2366,14 +2335,16 @@ static int pl022_runtime_resume(struct device *dev)
{
struct pl022 *pl022 = dev_get_drvdata(dev);
pl022_resume_resources(pl022, true);
pinctrl_pm_select_default_state(dev);
clk_prepare_enable(pl022->clk);
return 0;
}
#endif
static const struct dev_pm_ops pl022_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume)
SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
SET_PM_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
};
static struct vendor_data vendor_arm = {

779
drivers/spi/spi-qup.c 100644
View File

@ -0,0 +1,779 @@
/*
* Copyright (c) 2008-2014, The Linux foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License rev 2 and
* only rev 2 as published by the free Software foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#define QUP_CONFIG 0x0000
#define QUP_STATE 0x0004
#define QUP_IO_M_MODES 0x0008
#define QUP_SW_RESET 0x000c
#define QUP_OPERATIONAL 0x0018
#define QUP_ERROR_FLAGS 0x001c
#define QUP_ERROR_FLAGS_EN 0x0020
#define QUP_OPERATIONAL_MASK 0x0028
#define QUP_HW_VERSION 0x0030
#define QUP_MX_OUTPUT_CNT 0x0100
#define QUP_OUTPUT_FIFO 0x0110
#define QUP_MX_WRITE_CNT 0x0150
#define QUP_MX_INPUT_CNT 0x0200
#define QUP_MX_READ_CNT 0x0208
#define QUP_INPUT_FIFO 0x0218
#define SPI_CONFIG 0x0300
#define SPI_IO_CONTROL 0x0304
#define SPI_ERROR_FLAGS 0x0308
#define SPI_ERROR_FLAGS_EN 0x030c
/* QUP_CONFIG fields */
#define QUP_CONFIG_SPI_MODE (1 << 8)
#define QUP_CONFIG_CLOCK_AUTO_GATE BIT(13)
#define QUP_CONFIG_NO_INPUT BIT(7)
#define QUP_CONFIG_NO_OUTPUT BIT(6)
#define QUP_CONFIG_N 0x001f
/* QUP_STATE fields */
#define QUP_STATE_VALID BIT(2)
#define QUP_STATE_RESET 0
#define QUP_STATE_RUN 1
#define QUP_STATE_PAUSE 3
#define QUP_STATE_MASK 3
#define QUP_STATE_CLEAR 2
#define QUP_HW_VERSION_2_1_1 0x20010001
/* QUP_IO_M_MODES fields */
#define QUP_IO_M_PACK_EN BIT(15)
#define QUP_IO_M_UNPACK_EN BIT(14)
#define QUP_IO_M_INPUT_MODE_MASK_SHIFT 12
#define QUP_IO_M_OUTPUT_MODE_MASK_SHIFT 10
#define QUP_IO_M_INPUT_MODE_MASK (3 << QUP_IO_M_INPUT_MODE_MASK_SHIFT)
#define QUP_IO_M_OUTPUT_MODE_MASK (3 << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT)
#define QUP_IO_M_OUTPUT_BLOCK_SIZE(x) (((x) & (0x03 << 0)) >> 0)
#define QUP_IO_M_OUTPUT_FIFO_SIZE(x) (((x) & (0x07 << 2)) >> 2)
#define QUP_IO_M_INPUT_BLOCK_SIZE(x) (((x) & (0x03 << 5)) >> 5)
#define QUP_IO_M_INPUT_FIFO_SIZE(x) (((x) & (0x07 << 7)) >> 7)
#define QUP_IO_M_MODE_FIFO 0
#define QUP_IO_M_MODE_BLOCK 1
#define QUP_IO_M_MODE_DMOV 2
#define QUP_IO_M_MODE_BAM 3
/* QUP_OPERATIONAL fields */
#define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11)
#define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10)
#define QUP_OP_IN_SERVICE_FLAG BIT(9)
#define QUP_OP_OUT_SERVICE_FLAG BIT(8)
#define QUP_OP_IN_FIFO_FULL BIT(7)
#define QUP_OP_OUT_FIFO_FULL BIT(6)
#define QUP_OP_IN_FIFO_NOT_EMPTY BIT(5)
#define QUP_OP_OUT_FIFO_NOT_EMPTY BIT(4)
/* QUP_ERROR_FLAGS and QUP_ERROR_FLAGS_EN fields */
#define QUP_ERROR_OUTPUT_OVER_RUN BIT(5)
#define QUP_ERROR_INPUT_UNDER_RUN BIT(4)
#define QUP_ERROR_OUTPUT_UNDER_RUN BIT(3)
#define QUP_ERROR_INPUT_OVER_RUN BIT(2)
/* SPI_CONFIG fields */
#define SPI_CONFIG_HS_MODE BIT(10)
#define SPI_CONFIG_INPUT_FIRST BIT(9)
#define SPI_CONFIG_LOOPBACK BIT(8)
/* SPI_IO_CONTROL fields */
#define SPI_IO_C_FORCE_CS BIT(11)
#define SPI_IO_C_CLK_IDLE_HIGH BIT(10)
#define SPI_IO_C_MX_CS_MODE BIT(8)
#define SPI_IO_C_CS_N_POLARITY_0 BIT(4)
#define SPI_IO_C_CS_SELECT(x) (((x) & 3) << 2)
#define SPI_IO_C_CS_SELECT_MASK 0x000c
#define SPI_IO_C_TRISTATE_CS BIT(1)
#define SPI_IO_C_NO_TRI_STATE BIT(0)
/* SPI_ERROR_FLAGS and SPI_ERROR_FLAGS_EN fields */
#define SPI_ERROR_CLK_OVER_RUN BIT(1)
#define SPI_ERROR_CLK_UNDER_RUN BIT(0)
#define SPI_NUM_CHIPSELECTS 4
/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE 26000000
#define SPI_MAX_RATE 50000000
#define SPI_DELAY_THRESHOLD 1
#define SPI_DELAY_RETRY 10
struct spi_qup {
void __iomem *base;
struct device *dev;
struct clk *cclk; /* core clock */
struct clk *iclk; /* interface clock */
int irq;
spinlock_t lock;
int in_fifo_sz;
int out_fifo_sz;
int in_blk_sz;
int out_blk_sz;
struct spi_transfer *xfer;
struct completion done;
int error;
int w_size; /* bytes per SPI word */
int tx_bytes;
int rx_bytes;
};
static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
{
u32 opstate = readl_relaxed(controller->base + QUP_STATE);
return opstate & QUP_STATE_VALID;
}
static int spi_qup_set_state(struct spi_qup *controller, u32 state)
{
unsigned long loop;
u32 cur_state;
loop = 0;
while (!spi_qup_is_valid_state(controller)) {
usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
if (++loop > SPI_DELAY_RETRY)
return -EIO;
}
if (loop)
dev_dbg(controller->dev, "invalid state for %ld,us %d\n",
loop, state);
cur_state = readl_relaxed(controller->base + QUP_STATE);
/*
* Per spec: for PAUSE_STATE to RESET_STATE, two writes
* of (b10) are required
*/
if (((cur_state & QUP_STATE_MASK) == QUP_STATE_PAUSE) &&
(state == QUP_STATE_RESET)) {
writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
} else {
cur_state &= ~QUP_STATE_MASK;
cur_state |= state;
writel_relaxed(cur_state, controller->base + QUP_STATE);
}
loop = 0;
while (!spi_qup_is_valid_state(controller)) {
usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
if (++loop > SPI_DELAY_RETRY)
return -EIO;
}
return 0;
}
static void spi_qup_fifo_read(struct spi_qup *controller,
struct spi_transfer *xfer)
{
u8 *rx_buf = xfer->rx_buf;
u32 word, state;
int idx, shift, w_size;
w_size = controller->w_size;
while (controller->rx_bytes < xfer->len) {
state = readl_relaxed(controller->base + QUP_OPERATIONAL);
if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
break;
word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
if (!rx_buf) {
controller->rx_bytes += w_size;
continue;
}
for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) {
/*
* The data format depends on bytes per SPI word:
* 4 bytes: 0x12345678
* 2 bytes: 0x00001234
* 1 byte : 0x00000012
*/
shift = BITS_PER_BYTE;
shift *= (w_size - idx - 1);
rx_buf[controller->rx_bytes] = word >> shift;
}
}
}
static void spi_qup_fifo_write(struct spi_qup *controller,
struct spi_transfer *xfer)
{
const u8 *tx_buf = xfer->tx_buf;
u32 word, state, data;
int idx, w_size;
w_size = controller->w_size;
while (controller->tx_bytes < xfer->len) {
state = readl_relaxed(controller->base + QUP_OPERATIONAL);
if (state & QUP_OP_OUT_FIFO_FULL)
break;
word = 0;
for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) {
if (!tx_buf) {
controller->tx_bytes += w_size;
break;
}
data = tx_buf[controller->tx_bytes];
word |= data << (BITS_PER_BYTE * (3 - idx));
}
writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
}
}
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
struct spi_transfer *xfer;
u32 opflags, qup_err, spi_err;
unsigned long flags;
int error = 0;
spin_lock_irqsave(&controller->lock, flags);
xfer = controller->xfer;
controller->xfer = NULL;
spin_unlock_irqrestore(&controller->lock, flags);
qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
if (!xfer) {
dev_err_ratelimited(controller->dev, "unexpected irq %x08 %x08 %x08\n",
qup_err, spi_err, opflags);
return IRQ_HANDLED;
}
if (qup_err) {
if (qup_err & QUP_ERROR_OUTPUT_OVER_RUN)
dev_warn(controller->dev, "OUTPUT_OVER_RUN\n");
if (qup_err & QUP_ERROR_INPUT_UNDER_RUN)
dev_warn(controller->dev, "INPUT_UNDER_RUN\n");
if (qup_err & QUP_ERROR_OUTPUT_UNDER_RUN)
dev_warn(controller->dev, "OUTPUT_UNDER_RUN\n");
if (qup_err & QUP_ERROR_INPUT_OVER_RUN)
dev_warn(controller->dev, "INPUT_OVER_RUN\n");
error = -EIO;
}
if (spi_err) {
if (spi_err & SPI_ERROR_CLK_OVER_RUN)
dev_warn(controller->dev, "CLK_OVER_RUN\n");
if (spi_err & SPI_ERROR_CLK_UNDER_RUN)
dev_warn(controller->dev, "CLK_UNDER_RUN\n");
error = -EIO;
}
if (opflags & QUP_OP_IN_SERVICE_FLAG)
spi_qup_fifo_read(controller, xfer);
if (opflags & QUP_OP_OUT_SERVICE_FLAG)
spi_qup_fifo_write(controller, xfer);
spin_lock_irqsave(&controller->lock, flags);
controller->error = error;
controller->xfer = xfer;
spin_unlock_irqrestore(&controller->lock, flags);
if (controller->rx_bytes == xfer->len || error)
complete(&controller->done);
return IRQ_HANDLED;
}
/* set clock freq ... bits per word */
static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 config, iomode, mode;
int ret, n_words, w_size;
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
xfer->len, controller->in_fifo_sz);
return -EIO;
}
ret = clk_set_rate(controller->cclk, xfer->speed_hz);
if (ret) {
dev_err(controller->dev, "fail to set frequency %d",
xfer->speed_hz);
return -EIO;
}
if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
dev_err(controller->dev, "cannot set RESET state\n");
return -EIO;
}
w_size = 4;
if (xfer->bits_per_word <= 8)
w_size = 1;
else if (xfer->bits_per_word <= 16)
w_size = 2;
n_words = xfer->len / w_size;
controller->w_size = w_size;
if (n_words <= controller->in_fifo_sz) {
mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
} else {
mode = QUP_IO_M_MODE_BLOCK;
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
/* must be zero for BLOCK and BAM */
writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
}
iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
/* Set input and output transfer mode */
iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
config = readl_relaxed(controller->base + SPI_CONFIG);
if (spi->mode & SPI_LOOP)
config |= SPI_CONFIG_LOOPBACK;
else
config &= ~SPI_CONFIG_LOOPBACK;
if (spi->mode & SPI_CPHA)
config &= ~SPI_CONFIG_INPUT_FIRST;
else
config |= SPI_CONFIG_INPUT_FIRST;
/*
* HS_MODE improves signal stability for spi-clk high rates,
* but is invalid in loop back mode.
*/
if ((xfer->speed_hz >= SPI_HS_MIN_RATE) && !(spi->mode & SPI_LOOP))
config |= SPI_CONFIG_HS_MODE;
else
config &= ~SPI_CONFIG_HS_MODE;
writel_relaxed(config, controller->base + SPI_CONFIG);
config = readl_relaxed(controller->base + QUP_CONFIG);
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
config |= xfer->bits_per_word - 1;
config |= QUP_CONFIG_SPI_MODE;
writel_relaxed(config, controller->base + QUP_CONFIG);
writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
return 0;
}
static void spi_qup_set_cs(struct spi_device *spi, bool enable)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 iocontol, mask;
iocontol = readl_relaxed(controller->base + SPI_IO_CONTROL);
/* Disable auto CS toggle and use manual */
iocontol &= ~SPI_IO_C_MX_CS_MODE;
iocontol |= SPI_IO_C_FORCE_CS;
iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
iocontol |= SPI_IO_C_CS_SELECT(spi->chip_select);
mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select;
if (enable)
iocontol |= mask;
else
iocontol &= ~mask;
writel_relaxed(iocontol, controller->base + SPI_IO_CONTROL);
}
static int spi_qup_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(master);
unsigned long timeout, flags;
int ret = -EIO;
ret = spi_qup_io_config(spi, xfer);
if (ret)
return ret;
timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
timeout = 100 * msecs_to_jiffies(timeout);
reinit_completion(&controller->done);
spin_lock_irqsave(&controller->lock, flags);
controller->xfer = xfer;
controller->error = 0;
controller->rx_bytes = 0;
controller->tx_bytes = 0;
spin_unlock_irqrestore(&controller->lock, flags);
if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
dev_warn(controller->dev, "cannot set RUN state\n");
goto exit;
}
if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
dev_warn(controller->dev, "cannot set PAUSE state\n");
goto exit;
}
spi_qup_fifo_write(controller, xfer);
if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
dev_warn(controller->dev, "cannot set EXECUTE state\n");
goto exit;
}
if (!wait_for_completion_timeout(&controller->done, timeout))
ret = -ETIMEDOUT;
exit:
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
controller->xfer = NULL;
if (!ret)
ret = controller->error;
spin_unlock_irqrestore(&controller->lock, flags);
return ret;
}
static int spi_qup_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct clk *iclk, *cclk;
struct spi_qup *controller;
struct resource *res;
struct device *dev;
void __iomem *base;
u32 data, max_freq, iomode;
int ret, irq, size;
dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
cclk = devm_clk_get(dev, "core");
if (IS_ERR(cclk))
return PTR_ERR(cclk);
iclk = devm_clk_get(dev, "iface");
if (IS_ERR(iclk))
return PTR_ERR(iclk);
/* This is optional parameter */
if (of_property_read_u32(dev->of_node, "spi-max-frequency", &max_freq))
max_freq = SPI_MAX_RATE;
if (!max_freq || max_freq > SPI_MAX_RATE) {
dev_err(dev, "invalid clock frequency %d\n", max_freq);
return -ENXIO;
}
ret = clk_prepare_enable(cclk);
if (ret) {
dev_err(dev, "cannot enable core clock\n");
return ret;
}
ret = clk_prepare_enable(iclk);
if (ret) {
clk_disable_unprepare(cclk);
dev_err(dev, "cannot enable iface clock\n");
return ret;
}
data = readl_relaxed(base + QUP_HW_VERSION);
if (data < QUP_HW_VERSION_2_1_1) {
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
dev_err(dev, "v.%08x is not supported\n", data);
return -ENXIO;
}
master = spi_alloc_master(dev, sizeof(struct spi_qup));
if (!master) {
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
dev_err(dev, "cannot allocate master\n");
return -ENOMEM;
}
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->max_speed_hz = max_freq;
master->set_cs = spi_qup_set_cs;
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
platform_set_drvdata(pdev, master);
controller = spi_master_get_devdata(master);
controller->dev = dev;
controller->base = base;
controller->iclk = iclk;
controller->cclk = cclk;
controller->irq = irq;
spin_lock_init(&controller->lock);
init_completion(&controller->done);
iomode = readl_relaxed(base + QUP_IO_M_MODES);
size = QUP_IO_M_OUTPUT_BLOCK_SIZE(iomode);
if (size)
controller->out_blk_sz = size * 16;
else
controller->out_blk_sz = 4;
size = QUP_IO_M_INPUT_BLOCK_SIZE(iomode);
if (size)
controller->in_blk_sz = size * 16;
else
controller->in_blk_sz = 4;
size = QUP_IO_M_OUTPUT_FIFO_SIZE(iomode);
controller->out_fifo_sz = controller->out_blk_sz * (2 << size);
size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
dev_info(dev, "v.%08x IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
data, controller->in_blk_sz, controller->in_fifo_sz,
controller->out_blk_sz, controller->out_fifo_sz);
writel_relaxed(1, base + QUP_SW_RESET);
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
if (ret) {
dev_err(dev, "cannot set RESET state\n");
goto error;
}
writel_relaxed(0, base + QUP_OPERATIONAL);
writel_relaxed(0, base + QUP_IO_M_MODES);
writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
base + SPI_ERROR_FLAGS_EN);
writel_relaxed(0, base + SPI_CONFIG);
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
ret = devm_request_irq(dev, irq, spi_qup_qup_irq,
IRQF_TRIGGER_HIGH, pdev->name, controller);
if (ret)
goto error;
ret = devm_spi_register_master(dev, master);
if (ret)
goto error;
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
error:
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
spi_master_put(master);
return ret;
}
#ifdef CONFIG_PM_RUNTIME
static int spi_qup_pm_suspend_runtime(struct device *device)
{
struct spi_master *master = dev_get_drvdata(device);
struct spi_qup *controller = spi_master_get_devdata(master);
u32 config;
/* Enable clocks auto gaiting */
config = readl(controller->base + QUP_CONFIG);
config |= QUP_CONFIG_CLOCK_AUTO_GATE;
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
static int spi_qup_pm_resume_runtime(struct device *device)
{
struct spi_master *master = dev_get_drvdata(device);
struct spi_qup *controller = spi_master_get_devdata(master);
u32 config;
/* Disable clocks auto gaiting */
config = readl_relaxed(controller->base + QUP_CONFIG);
config &= ~QUP_CONFIG_CLOCK_AUTO_GATE;
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
static int spi_qup_suspend(struct device *device)
{
struct spi_master *master = dev_get_drvdata(device);
struct spi_qup *controller = spi_master_get_devdata(master);
int ret;
ret = spi_master_suspend(master);
if (ret)
return ret;
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
if (ret)
return ret;
clk_disable_unprepare(controller->cclk);
clk_disable_unprepare(controller->iclk);
return 0;
}
static int spi_qup_resume(struct device *device)
{
struct spi_master *master = dev_get_drvdata(device);
struct spi_qup *controller = spi_master_get_devdata(master);
int ret;
ret = clk_prepare_enable(controller->iclk);
if (ret)
return ret;
ret = clk_prepare_enable(controller->cclk);
if (ret)
return ret;
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
if (ret)
return ret;
return spi_master_resume(master);
}
#endif /* CONFIG_PM_SLEEP */
static int spi_qup_remove(struct platform_device *pdev)
{
struct spi_master *master = dev_get_drvdata(&pdev->dev);
struct spi_qup *controller = spi_master_get_devdata(master);
int ret;
ret = pm_runtime_get_sync(&pdev->dev);
if (ret)
return ret;
ret = spi_qup_set_state(controller, QUP_STATE_RESET);
if (ret)
return ret;
clk_disable_unprepare(controller->cclk);
clk_disable_unprepare(controller->iclk);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static struct of_device_id spi_qup_dt_match[] = {
{ .compatible = "qcom,spi-qup-v2.1.1", },
{ .compatible = "qcom,spi-qup-v2.2.1", },
{ }
};
MODULE_DEVICE_TABLE(of, spi_qup_dt_match);
static const struct dev_pm_ops spi_qup_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(spi_qup_suspend, spi_qup_resume)
SET_RUNTIME_PM_OPS(spi_qup_pm_suspend_runtime,
spi_qup_pm_resume_runtime,
NULL)
};
static struct platform_driver spi_qup_driver = {
.driver = {
.name = "spi_qup",
.owner = THIS_MODULE,
.pm = &spi_qup_dev_pm_ops,
.of_match_table = spi_qup_dt_match,
},
.probe = spi_qup_probe,
.remove = spi_qup_remove,
};
module_platform_driver(spi_qup_driver);
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spi_qup");

852
drivers/spi/spi-rspi.c
View File

File diff suppressed because it is too large Load Diff

18
drivers/spi/spi-s3c24xx.c
View File

@ -122,25 +122,15 @@ static int s3c24xx_spi_update_state(struct spi_device *spi,
{
struct s3c24xx_spi *hw = to_hw(spi);
struct s3c24xx_spi_devstate *cs = spi->controller_state;
unsigned int bpw;
unsigned int hz;
unsigned int div;
unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
if (!bpw)
bpw = 8;
if (!hz)
hz = spi->max_speed_hz;
if (bpw != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
return -EINVAL;
}
if (spi->mode != cs->mode) {
u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK;
@ -543,6 +533,7 @@ static int s3c24xx_spi_probe(struct platform_device *pdev)
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = pdata->bus_num;
master->bits_per_word_mask = SPI_BPW_MASK(8);
/* setup the state for the bitbang driver */
@ -642,6 +633,11 @@ static int s3c24xx_spi_remove(struct platform_device *dev)
static int s3c24xx_spi_suspend(struct device *dev)
{
struct s3c24xx_spi *hw = dev_get_drvdata(dev);
int ret;
ret = spi_master_suspend(hw->master);
if (ret)
return ret;
if (hw->pdata && hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 0);
@ -655,7 +651,7 @@ static int s3c24xx_spi_resume(struct device *dev)
struct s3c24xx_spi *hw = dev_get_drvdata(dev);
s3c24xx_spi_initialsetup(hw);
return 0;
return spi_master_resume(hw->master);
}
static const struct dev_pm_ops s3c24xx_spi_pmops = {

4
include/linux/pm_runtime.h
View File

@ -26,9 +26,13 @@
#ifdef CONFIG_PM
extern int pm_generic_runtime_suspend(struct device *dev);
extern int pm_generic_runtime_resume(struct device *dev);
extern int pm_runtime_force_suspend(struct device *dev);
extern int pm_runtime_force_resume(struct device *dev);
#else
static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }
static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }
static inline int pm_runtime_force_suspend(struct device *dev) { return 0; }
static inline int pm_runtime_force_resume(struct device *dev) { return 0; }
#endif
#ifdef CONFIG_PM_RUNTIME