Merge master.kernel.org:/home/rmk/linux-2.6-serial
This commit is contained in:
commit
17be03f0a1
|
@ -27,7 +27,6 @@
|
|||
#include <asm/mach/arch.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include "generic.h"
|
||||
#include <asm/serial.h>
|
||||
|
||||
static struct resource cs89x0_resources[] = {
|
||||
[0] = {
|
||||
|
|
|
@ -140,7 +140,7 @@ void __init plat_setup(void)
|
|||
uart.type = PORT_UNKNOWN;
|
||||
uart.uartclk = 18432000;
|
||||
uart.irq = COBALT_SERIAL_IRQ;
|
||||
uart.flags = STD_COM_FLAGS;
|
||||
uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
uart.iobase = 0xc800000;
|
||||
uart.iotype = UPIO_PORT;
|
||||
|
||||
|
|
|
@ -134,8 +134,8 @@ void __init serial_init(void)
|
|||
|
||||
memset(&s, 0, sizeof(s));
|
||||
|
||||
s.flags = STD_COM_FLAGS;
|
||||
s.iotype = SERIAL_IO_MEM;
|
||||
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
s.iotype = UPIO_MEM;
|
||||
|
||||
if (mips_machtype == MACH_LASAT_100) {
|
||||
s.uartclk = LASAT_BASE_BAUD_100 * 16;
|
||||
|
|
|
@ -82,8 +82,8 @@ static void __init serial_init(void)
|
|||
#endif
|
||||
s.irq = ATLASINT_UART;
|
||||
s.uartclk = ATLAS_BASE_BAUD * 16;
|
||||
s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
|
||||
s.iotype = SERIAL_IO_PORT;
|
||||
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
|
||||
s.iotype = UPIO_PORT;
|
||||
s.regshift = 3;
|
||||
|
||||
if (early_serial_setup(&s) != 0) {
|
||||
|
|
|
@ -71,8 +71,8 @@ static void __init serial_init(void)
|
|||
#endif
|
||||
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
|
||||
s.uartclk = SEAD_BASE_BAUD * 16;
|
||||
s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
|
||||
s.iotype = 0;
|
||||
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
|
||||
s.iotype = UPIO_PORT;
|
||||
s.regshift = 3;
|
||||
|
||||
if (early_serial_setup(&s) != 0) {
|
||||
|
|
|
@ -88,8 +88,8 @@ static void __init serial_init(void)
|
|||
but poll for now */
|
||||
s.irq = 0;
|
||||
s.uartclk = BASE_BAUD * 16;
|
||||
s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
|
||||
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
s.iotype = UPIO_PORT;
|
||||
s.regshift = 0;
|
||||
s.timeout = 4;
|
||||
|
||||
|
|
|
@ -93,7 +93,7 @@ static void inline ja_console_probe(void)
|
|||
up.uartclk = JAGUAR_ATX_UART_CLK;
|
||||
up.regshift = 2;
|
||||
up.iotype = UPIO_MEM;
|
||||
up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
up.line = 0;
|
||||
|
||||
if (early_serial_setup(&up))
|
||||
|
|
|
@ -66,28 +66,28 @@ struct ip3106_port ip3106_ports[] = {
|
|||
[0] = {
|
||||
.port = {
|
||||
.type = PORT_IP3106,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.membase = (void __iomem *)PNX8550_UART_PORT0,
|
||||
.mapbase = PNX8550_UART_PORT0,
|
||||
.irq = PNX8550_UART_INT(0),
|
||||
.uartclk = 3692300,
|
||||
.fifosize = 16,
|
||||
.ops = &ip3106_pops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 0,
|
||||
},
|
||||
},
|
||||
[1] = {
|
||||
.port = {
|
||||
.type = PORT_IP3106,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.membase = (void __iomem *)PNX8550_UART_PORT1,
|
||||
.mapbase = PNX8550_UART_PORT1,
|
||||
.irq = PNX8550_UART_INT(1),
|
||||
.uartclk = 3692300,
|
||||
.fifosize = 16,
|
||||
.ops = &ip3106_pops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 1,
|
||||
},
|
||||
},
|
||||
|
|
|
@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
|
|||
up.uartclk = TITAN_UART_CLK;
|
||||
up.regshift = 0;
|
||||
up.iotype = UPIO_MEM;
|
||||
up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
up.line = 0;
|
||||
|
||||
if (early_serial_setup(&up))
|
||||
|
|
|
@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|||
#include <linux/tty.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_core.h>
|
||||
extern int early_serial_setup(struct uart_port *port);
|
||||
|
||||
#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
|
||||
#define BASE_BAUD (1843200 / 16)
|
||||
|
||||
#endif /* CONFIG_SERIAL_8250 */
|
||||
|
||||
/* An arbitrary time; this can be decreased if reliability looks good */
|
||||
|
@ -110,8 +105,8 @@ void __init plat_setup(void)
|
|||
o2_serial[0].type = PORT_16550A;
|
||||
o2_serial[0].line = 0;
|
||||
o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
|
||||
o2_serial[0].flags = STD_COM_FLAGS;
|
||||
o2_serial[0].uartclk = BASE_BAUD * 16;
|
||||
o2_serial[0].flags = UPF_SKIP_TEST;
|
||||
o2_serial[0].uartclk = 1843200;
|
||||
o2_serial[0].iotype = UPIO_MEM;
|
||||
o2_serial[0].membase = (char *)&mace->isa.serial1;
|
||||
o2_serial[0].fifosize = 14;
|
||||
|
@ -121,8 +116,8 @@ void __init plat_setup(void)
|
|||
o2_serial[1].type = PORT_16550A;
|
||||
o2_serial[1].line = 1;
|
||||
o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
|
||||
o2_serial[1].flags = STD_COM_FLAGS;
|
||||
o2_serial[1].uartclk = BASE_BAUD * 16;
|
||||
o2_serial[1].flags = UPF_SKIP_TEST;
|
||||
o2_serial[1].uartclk = 1843200;
|
||||
o2_serial[1].iotype = UPIO_MEM;
|
||||
o2_serial[1].membase = (char *)&mace->isa.serial2;
|
||||
o2_serial[1].fifosize = 14;
|
||||
|
|
|
@ -332,8 +332,8 @@ bamboo_early_serial_map(void)
|
|||
port.irq = 0;
|
||||
port.uartclk = clocks.uart0;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -97,8 +97,8 @@ bubinga_early_serial_map(void)
|
|||
port.irq = ACTING_UART0_INT;
|
||||
port.uartclk = uart_clock;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -225,8 +225,8 @@ ebony_early_serial_map(void)
|
|||
port.irq = 0;
|
||||
port.uartclk = clocks.uart0;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -279,8 +279,8 @@ luan_early_serial_map(void)
|
|||
port.irq = UART0_INT;
|
||||
port.uartclk = clocks.uart0;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -248,8 +248,8 @@ ocotea_early_serial_map(void)
|
|||
port.irq = UART0_INT;
|
||||
port.uartclk = clocks.uart0;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -95,8 +95,8 @@ ml300_early_serial_map(void)
|
|||
port.irq = old_ports[i].irq;
|
||||
port.uartclk = old_ports[i].baud_base * 16;
|
||||
port.regshift = old_ports[i].iomem_reg_shift;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = i;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -305,8 +305,8 @@ yucca_early_serial_map(void)
|
|||
port.irq = UART0_INT;
|
||||
port.uartclk = clocks.uart0;
|
||||
port.regshift = 0;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
||||
port.line = 0;
|
||||
|
||||
if (early_serial_setup(&port) != 0) {
|
||||
|
|
|
@ -301,14 +301,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|||
struct uart_port p;
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
gen550_init(0, &p);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
|
|
|
@ -162,14 +162,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|||
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
gen550_init(0, &p);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
|
|
|
@ -534,14 +534,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|||
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
gen550_init(0, &p);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
|
|
|
@ -64,7 +64,7 @@ sbc8560_early_serial_map(void)
|
|||
uart_req.irq = MPC85xx_IRQ_EXT9;
|
||||
uart_req.flags = STD_COM_FLAGS;
|
||||
uart_req.uartclk = BASE_BAUD * 16;
|
||||
uart_req.iotype = SERIAL_IO_MEM;
|
||||
uart_req.iotype = UPIO_MEM;
|
||||
uart_req.mapbase = UARTA_ADDR;
|
||||
uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
|
||||
uart_req.type = PORT_16650;
|
||||
|
|
|
@ -346,14 +346,14 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|||
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
gen550_init(0, &p);
|
||||
|
||||
memset(&p, 0, sizeof (p));
|
||||
p.iotype = SERIAL_IO_MEM;
|
||||
p.iotype = UPIO_MEM;
|
||||
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
|
||||
p.uartclk = binfo->bi_busfreq;
|
||||
|
||||
|
|
|
@ -116,7 +116,7 @@ chestnut_early_serial_map(void)
|
|||
port.uartclk = BASE_BAUD * 16;
|
||||
port.irq = UART0_INT;
|
||||
port.flags = STD_COM_FLAGS | UPF_IOREMAP;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.mapbase = CHESTNUT_UART0_IO_BASE;
|
||||
port.regshift = 0;
|
||||
|
||||
|
|
|
@ -330,7 +330,7 @@ ev64260_early_serial_map(void)
|
|||
port.irq = EV64260_UART_0_IRQ;
|
||||
port.uartclk = BASE_BAUD * 16;
|
||||
port.regshift = 2;
|
||||
port.iotype = SERIAL_IO_MEM;
|
||||
port.iotype = UPIO_MEM;
|
||||
port.flags = STD_COM_FLAGS;
|
||||
|
||||
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
||||
|
|
|
@ -100,7 +100,7 @@ static void __init ppc7d_early_serial_map(void)
|
|||
serial_req.uartclk = UART_CLK;
|
||||
serial_req.irq = 4;
|
||||
serial_req.flags = STD_COM_FLAGS;
|
||||
serial_req.iotype = SERIAL_IO_MEM;
|
||||
serial_req.iotype = UPIO_MEM;
|
||||
serial_req.membase = (u_char *) PPC7D_SERIAL_0;
|
||||
|
||||
gen550_init(0, &serial_req);
|
||||
|
|
|
@ -176,8 +176,8 @@ spruce_early_serial_map(void)
|
|||
memset(&serial_req, 0, sizeof(serial_req));
|
||||
serial_req.uartclk = uart_clk;
|
||||
serial_req.irq = UART0_INT;
|
||||
serial_req.flags = ASYNC_BOOT_AUTOCONF;
|
||||
serial_req.iotype = SERIAL_IO_MEM;
|
||||
serial_req.flags = UPF_BOOT_AUTOCONF;
|
||||
serial_req.iotype = UPIO_MEM;
|
||||
serial_req.membase = (u_char *)UART0_IO_BASE;
|
||||
serial_req.regshift = 0;
|
||||
|
||||
|
|
|
@ -108,7 +108,7 @@ mpc83xx_early_serial_map(void)
|
|||
|
||||
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
||||
memset(&serial_req, 0, sizeof (serial_req));
|
||||
serial_req.iotype = SERIAL_IO_MEM;
|
||||
serial_req.iotype = UPIO_MEM;
|
||||
serial_req.mapbase = pdata[0].mapbase;
|
||||
serial_req.membase = pdata[0].membase;
|
||||
serial_req.regshift = 0;
|
||||
|
|
|
@ -90,7 +90,7 @@ mpc85xx_early_serial_map(void)
|
|||
|
||||
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
||||
memset(&serial_req, 0, sizeof (serial_req));
|
||||
serial_req.iotype = SERIAL_IO_MEM;
|
||||
serial_req.iotype = UPIO_MEM;
|
||||
serial_req.mapbase = pdata[0].mapbase;
|
||||
serial_req.membase = pdata[0].membase;
|
||||
serial_req.regshift = 0;
|
||||
|
|
|
@ -362,7 +362,7 @@ static struct uart_ops serial21285_ops = {
|
|||
|
||||
static struct uart_port serial21285_port = {
|
||||
.mapbase = 0x42000160,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = NO_IRQ,
|
||||
.fifosize = 16,
|
||||
.ops = &serial21285_ops,
|
||||
|
|
|
@ -2229,6 +2229,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
|
|||
* and restore the IER
|
||||
*/
|
||||
wait_for_xmitr(up, BOTH_EMPTY);
|
||||
up->ier |= UART_IER_THRI;
|
||||
serial_out(up, UART_IER, ier | UART_IER_THRI);
|
||||
}
|
||||
|
||||
|
|
|
@ -56,7 +56,6 @@ static struct plat_serial8250_port au1x00_data[] = {
|
|||
#elif defined(CONFIG_SOC_AU1550)
|
||||
PORT(UART0_ADDR, AU1550_UART0_INT),
|
||||
PORT(UART1_ADDR, AU1550_UART1_INT),
|
||||
PORT(UART2_ADDR, AU1550_UART2_INT),
|
||||
PORT(UART3_ADDR, AU1550_UART3_INT),
|
||||
#elif defined(CONFIG_SOC_AU1200)
|
||||
PORT(UART0_ADDR, AU1200_UART0_INT),
|
||||
|
|
|
@ -1882,6 +1882,10 @@ static struct pci_device_id serial_pci_tbl[] = {
|
|||
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
||||
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
|
||||
pbn_b0_4_1843200 },
|
||||
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
|
||||
PCI_VENDOR_ID_AFAVLAB,
|
||||
PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
|
||||
pbn_b0_4_1152000 },
|
||||
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
|
||||
PCI_SUBVENDOR_ID_CONNECT_TECH,
|
||||
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
|
||||
|
|
|
@ -561,7 +561,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
|
|||
.port = {
|
||||
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
|
||||
.mapbase = INTEGRATOR_UART0_BASE,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = IRQ_UARTINT0,
|
||||
.uartclk = 14745600,
|
||||
.fifosize = 16,
|
||||
|
@ -576,7 +576,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
|
|||
.port = {
|
||||
.membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
|
||||
.mapbase = INTEGRATOR_UART1_BASE,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = IRQ_UARTINT1,
|
||||
.uartclk = 14745600,
|
||||
.fifosize = 16,
|
||||
|
|
|
@ -892,7 +892,7 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res
|
|||
int ret = 0;
|
||||
|
||||
switch (up->port.iotype) {
|
||||
case SERIAL_IO_MEM:
|
||||
case UPIO_MEM:
|
||||
if (up->port.mapbase) {
|
||||
*res = request_mem_region(up->port.mapbase, size, "serial");
|
||||
if (!*res)
|
||||
|
@ -900,8 +900,8 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res
|
|||
}
|
||||
break;
|
||||
|
||||
case SERIAL_IO_HUB6:
|
||||
case SERIAL_IO_PORT:
|
||||
case UPIO_HUB6:
|
||||
case UPIO_PORT:
|
||||
*res = request_region(up->port.iobase, size, "serial");
|
||||
if (!*res)
|
||||
ret = -EBUSY;
|
||||
|
@ -919,7 +919,7 @@ static void serial8250_release_port(struct uart_port *port)
|
|||
size <<= up->port.regshift;
|
||||
|
||||
switch (up->port.iotype) {
|
||||
case SERIAL_IO_MEM:
|
||||
case UPIO_MEM:
|
||||
if (up->port.mapbase) {
|
||||
/*
|
||||
* Unmap the area.
|
||||
|
@ -935,8 +935,8 @@ static void serial8250_release_port(struct uart_port *port)
|
|||
}
|
||||
break;
|
||||
|
||||
case SERIAL_IO_HUB6:
|
||||
case SERIAL_IO_PORT:
|
||||
case UPIO_HUB6:
|
||||
case UPIO_PORT:
|
||||
start = up->port.iobase;
|
||||
|
||||
if (size)
|
||||
|
|
|
@ -252,12 +252,9 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
|
|||
/* If we have not enough room in tty flip buffer, then we try
|
||||
* later, which will be the next rx-interrupt or a timeout
|
||||
*/
|
||||
if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
|
||||
tty->flip.work.func((void *)tty);
|
||||
if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
|
||||
printk(KERN_WARNING "TTY_DONT_FLIP set\n");
|
||||
return;
|
||||
}
|
||||
if(tty_buffer_request_room(tty, i) < i) {
|
||||
printk(KERN_WARNING "No room in flip buffer\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* get pointer */
|
||||
|
@ -276,9 +273,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
|
|||
continue;
|
||||
|
||||
error_return:
|
||||
*tty->flip.char_buf_ptr++ = ch;
|
||||
*tty->flip.flag_buf_ptr++ = flg;
|
||||
tty->flip.count++;
|
||||
tty_insert_flip_char(tty, ch, flg);
|
||||
|
||||
} /* End while (i--) */
|
||||
|
||||
|
@ -908,7 +903,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SMC1_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.flags = FLAG_SMC,
|
||||
|
@ -922,7 +917,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SMC2_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.flags = FLAG_SMC,
|
||||
|
@ -939,7 +934,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SCC1_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.tx_nrfifos = TX_NUM_FIFO,
|
||||
|
@ -953,7 +948,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SCC2_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.tx_nrfifos = TX_NUM_FIFO,
|
||||
|
@ -967,7 +962,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SCC3_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.tx_nrfifos = TX_NUM_FIFO,
|
||||
|
@ -981,7 +976,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
.port = {
|
||||
.irq = SCC4_IRQ,
|
||||
.ops = &cpm_uart_pops,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.lock = SPIN_LOCK_UNLOCKED,
|
||||
},
|
||||
.tx_nrfifos = TX_NUM_FIFO,
|
||||
|
|
|
@ -262,6 +262,7 @@ static inline void dz_receive_chars(struct dz_port *dport)
|
|||
}
|
||||
tty_insert_flip_char(tty, ch, flag);
|
||||
ignore_char:
|
||||
;
|
||||
} while (status & DZ_DVAL);
|
||||
|
||||
if (tty)
|
||||
|
@ -650,7 +651,7 @@ static void __init dz_init_ports(void)
|
|||
for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
|
||||
spin_lock_init(&dport->port.lock);
|
||||
dport->port.membase = (char *) base;
|
||||
dport->port.iotype = SERIAL_IO_PORT;
|
||||
dport->port.iotype = UPIO_PORT;
|
||||
dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
|
||||
dport->port.line = i;
|
||||
dport->port.fifosize = 1;
|
||||
|
|
|
@ -668,7 +668,7 @@ static struct imx_port imx_ports[] = {
|
|||
.rtsirq = UART1_MINT_RTS,
|
||||
.port = {
|
||||
.type = PORT_IMX,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.membase = (void *)IMX_UART1_BASE,
|
||||
.mapbase = IMX_UART1_BASE, /* FIXME */
|
||||
.irq = UART1_MINT_RX,
|
||||
|
@ -684,7 +684,7 @@ static struct imx_port imx_ports[] = {
|
|||
.rtsirq = UART2_MINT_RTS,
|
||||
.port = {
|
||||
.type = PORT_IMX,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.membase = (void *)IMX_UART2_BASE,
|
||||
.mapbase = IMX_UART2_BASE, /* FIXME */
|
||||
.irq = UART2_MINT_RX,
|
||||
|
|
|
@ -215,7 +215,7 @@ static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs)
|
|||
/* Lower and upper byte of baud rate generator divisor. */
|
||||
write_zsreg(channel, R12, regs[R12]);
|
||||
write_zsreg(channel, R13, regs[R13]);
|
||||
|
||||
|
||||
/* Now rewrite R14, with BRENAB (if set). */
|
||||
write_zsreg(channel, R14, regs[R14]);
|
||||
|
||||
|
@ -571,7 +571,7 @@ static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|||
else
|
||||
clear_bits |= DTR;
|
||||
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
up->curregs[R5] |= set_bits;
|
||||
up->curregs[R5] &= ~clear_bits;
|
||||
write_zsreg(channel, R5, up->curregs[R5]);
|
||||
|
@ -654,7 +654,7 @@ static void ip22zilog_enable_ms(struct uart_port *port)
|
|||
if (new_reg != up->curregs[R15]) {
|
||||
up->curregs[R15] = new_reg;
|
||||
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
write_zsreg(channel, R15, up->curregs[R15]);
|
||||
}
|
||||
}
|
||||
|
@ -680,7 +680,7 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
|
|||
if (new_reg != up->curregs[R5]) {
|
||||
up->curregs[R5] = new_reg;
|
||||
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
/* NOTE: Not subject to 'transmitter active' rule. */
|
||||
write_zsreg(channel, R5, up->curregs[R5]);
|
||||
}
|
||||
|
||||
|
|
|
@ -80,7 +80,7 @@
|
|||
#include <asm/serial.h>
|
||||
|
||||
/* Standard COM flags */
|
||||
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
|
||||
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
|
||||
|
||||
/*
|
||||
* SERIAL_PORT_DFNS tells us about built-in ports that have no
|
||||
|
|
|
@ -462,7 +462,7 @@ static int __init mux_probe(struct parisc_device *dev)
|
|||
port->mapbase = dev->hpa.start + MUX_OFFSET +
|
||||
(i * MUX_LINE_OFFSET);
|
||||
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
|
||||
port->iotype = SERIAL_IO_MEM;
|
||||
port->iotype = UPIO_MEM;
|
||||
port->type = PORT_MUX;
|
||||
port->irq = NO_IRQ;
|
||||
port->uartclk = 0;
|
||||
|
|
|
@ -1492,7 +1492,7 @@ no_dma:
|
|||
/*
|
||||
* Init remaining bits of "port" structure
|
||||
*/
|
||||
uap->port.iotype = SERIAL_IO_MEM;
|
||||
uap->port.iotype = UPIO_MEM;
|
||||
uap->port.irq = np->intrs[0].line;
|
||||
uap->port.uartclk = ZS_CLOCK;
|
||||
uap->port.fifosize = 1;
|
||||
|
|
|
@ -628,7 +628,7 @@ static void __init sa1100_init_ports(void)
|
|||
sa1100_ports[i].port.ops = &sa1100_pops;
|
||||
sa1100_ports[i].port.fifosize = 8;
|
||||
sa1100_ports[i].port.line = i;
|
||||
sa1100_ports[i].port.iotype = SERIAL_IO_MEM;
|
||||
sa1100_ports[i].port.iotype = UPIO_MEM;
|
||||
init_timer(&sa1100_ports[i].timer);
|
||||
sa1100_ports[i].timer.function = sa1100_timeout;
|
||||
sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
|
||||
|
|
|
@ -501,7 +501,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
|
|||
.port = {
|
||||
.membase = (void*) io_p2v (UART1_PHYS),
|
||||
.mapbase = UART1_PHYS,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = IRQ_UART1INTR,
|
||||
.uartclk = 14745600/2,
|
||||
.fifosize = 16,
|
||||
|
@ -514,7 +514,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
|
|||
.port = {
|
||||
.membase = (void*) io_p2v (UART2_PHYS),
|
||||
.mapbase = UART2_PHYS,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = IRQ_UART2INTR,
|
||||
.uartclk = 14745600/2,
|
||||
.fifosize = 16,
|
||||
|
@ -527,7 +527,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
|
|||
.port = {
|
||||
.membase = (void*) io_p2v (UART3_PHYS),
|
||||
.mapbase = UART3_PHYS,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = IRQ_UART3INTR,
|
||||
.uartclk = 14745600/2,
|
||||
.fifosize = 16,
|
||||
|
|
|
@ -1468,10 +1468,10 @@ static struct sci_port sci_ports[] = {
|
|||
.port = {
|
||||
.membase = (void *)0xff923000,
|
||||
.mapbase = 0xff923000,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = 61,
|
||||
.ops = &sci_uart_ops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 0,
|
||||
},
|
||||
.type = PORT_SCIF,
|
||||
|
@ -1482,10 +1482,10 @@ static struct sci_port sci_ports[] = {
|
|||
.port = {
|
||||
.membase = (void *)0xff924000,
|
||||
.mapbase = 0xff924000,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = 62,
|
||||
.ops = &sci_uart_ops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 1,
|
||||
},
|
||||
.type = PORT_SCIF,
|
||||
|
@ -1496,10 +1496,10 @@ static struct sci_port sci_ports[] = {
|
|||
.port = {
|
||||
.membase = (void *)0xff925000,
|
||||
.mapbase = 0xff925000,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = 63,
|
||||
.ops = &sci_uart_ops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 2,
|
||||
},
|
||||
.type = PORT_SCIF,
|
||||
|
@ -1511,10 +1511,10 @@ static struct sci_port sci_ports[] = {
|
|||
.port = {
|
||||
.membase = (void *)0xffe00000,
|
||||
.mapbase = 0xffe00000,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = 43,
|
||||
.ops = &sci_uart_ops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 0,
|
||||
},
|
||||
.type = PORT_SCIF,
|
||||
|
@ -1525,10 +1525,10 @@ static struct sci_port sci_ports[] = {
|
|||
.port = {
|
||||
.membase = (void *)0xffe10000,
|
||||
.mapbase = 0xffe10000,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.iotype = UPIO_MEM,
|
||||
.irq = 79,
|
||||
.ops = &sci_uart_ops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
.line = 1,
|
||||
},
|
||||
.type = PORT_SCIF,
|
||||
|
|
|
@ -1036,7 +1036,7 @@ static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg
|
|||
up->port.irq = edev->irqs[0];
|
||||
up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
|
||||
up->port.mapbase = (unsigned long)up->regs;
|
||||
up->port.iotype = SERIAL_IO_MEM;
|
||||
up->port.iotype = UPIO_MEM;
|
||||
|
||||
writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
|
||||
|
||||
|
|
|
@ -109,11 +109,11 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
|
|||
offset <<= up->port.regshift;
|
||||
|
||||
switch (up->port.iotype) {
|
||||
case SERIAL_IO_HUB6:
|
||||
case UPIO_HUB6:
|
||||
outb(up->port.hub6 - 1 + offset, up->port.iobase);
|
||||
return inb(up->port.iobase + 1);
|
||||
|
||||
case SERIAL_IO_MEM:
|
||||
case UPIO_MEM:
|
||||
return readb(up->port.membase + offset);
|
||||
|
||||
default:
|
||||
|
@ -139,12 +139,12 @@ serial_out(struct uart_sunsu_port *up, int offset, int value)
|
|||
offset <<= up->port.regshift;
|
||||
|
||||
switch (up->port.iotype) {
|
||||
case SERIAL_IO_HUB6:
|
||||
case UPIO_HUB6:
|
||||
outb(up->port.hub6 - 1 + offset, up->port.iobase);
|
||||
outb(value, up->port.iobase + 1);
|
||||
break;
|
||||
|
||||
case SERIAL_IO_MEM:
|
||||
case UPIO_MEM:
|
||||
writeb(value, up->port.membase + offset);
|
||||
break;
|
||||
|
||||
|
@ -1052,7 +1052,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
|
|||
return;
|
||||
|
||||
up->type_probed = PORT_UNKNOWN;
|
||||
up->port.iotype = SERIAL_IO_MEM;
|
||||
up->port.iotype = UPIO_MEM;
|
||||
|
||||
/*
|
||||
* First we look for Ebus-bases su's
|
||||
|
|
|
@ -1487,7 +1487,7 @@ static void __init sunzilog_prepare(void)
|
|||
up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
|
||||
|
||||
/* Channel A */
|
||||
up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
|
||||
up[(chip * 2) + 0].port.iotype = UPIO_MEM;
|
||||
up[(chip * 2) + 0].port.irq = zilog_irq;
|
||||
up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
|
||||
up[(chip * 2) + 0].port.fifosize = 1;
|
||||
|
@ -1498,7 +1498,7 @@ static void __init sunzilog_prepare(void)
|
|||
up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
|
||||
|
||||
/* Channel B */
|
||||
up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
|
||||
up[(chip * 2) + 1].port.iotype = UPIO_MEM;
|
||||
up[(chip * 2) + 1].port.irq = zilog_irq;
|
||||
up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
|
||||
up[(chip * 2) + 1].port.fifosize = 1;
|
||||
|
|
|
@ -496,7 +496,7 @@ static int __init v850e_uart_init (void)
|
|||
|
||||
port->ops = &v850e_uart_ops;
|
||||
port->line = chan;
|
||||
port->iotype = SERIAL_IO_MEM;
|
||||
port->iotype = UPIO_MEM;
|
||||
port->flags = UPF_BOOT_AUTOCONF;
|
||||
|
||||
/* We actually use multiple IRQs, but the serial
|
||||
|
|
|
@ -1832,6 +1832,7 @@
|
|||
#define PCI_VENDOR_ID_AFAVLAB 0x14db
|
||||
#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
|
||||
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
|
||||
#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
|
||||
|
||||
#define PCI_VENDOR_ID_BROADCOM 0x14e4
|
||||
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
|
||||
|
|
Loading…
Reference in a new issue