diff --git a/Documentation/dontdiff b/Documentation/dontdiff index b974cf595d01..96bea278bbf6 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -104,6 +104,7 @@ logo_*.c logo_*_clut224.c logo_*_mono.c lxdialog +mach-types mach-types.h make_times_h map diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 4ff4393ef0ea..7f58afb27e71 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -61,7 +61,7 @@ static struct plat_serial8250_port coyote_uart_data[] = { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 8ba1cd9406e7..65e356bd10d6 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index c2ba759e9946..4633470a6a37 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { .mapbase = IXP4XX_UART1_BASE_PHYS, .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, @@ -91,7 +91,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { .mapbase = IXP4XX_UART2_BASE_PHYS, .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1e7f343822d0..e9182242da95 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -30,6 +30,7 @@ * 28-Jun-2005 BJD Moved pm functionality out to common code * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s * 25-Jul-2005 BJD Removed ASIX static mappings + * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus */ #include @@ -60,6 +61,7 @@ #include #include #include +#include #include #include @@ -304,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot) } static struct s3c2410_platform_nand bast_nand_info = { - .tacls = 80, + .tacls = 40, .twrph0 = 80, .twrph1 = 80, .nr_sets = ARRAY_SIZE(bast_nand_sets), @@ -385,6 +387,17 @@ static struct platform_device bast_sio = { }, }; +/* we have devices on the bus which cannot work much over the + * standard 100KHz i2c bus frequency +*/ + +static struct s3c2410_platform_i2c bast_i2c_info = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 130*1000, +}; + /* Standard BAST devices */ static struct platform_device *bast_devices[] __initdata = { @@ -431,6 +444,7 @@ void __init bast_map_io(void) s3c24xx_uclk.parent = &s3c24xx_clkout1; s3c_device_nand.dev.platform_data = &bast_nand_info; + s3c_device_i2c.dev.platform_data = &bast_i2c_info; s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2d977b4eeeab..b88de2700146 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area) bhi 1b mov pc, lr -/* ================================ CACHE LOCKING============================ - * - * The XScale MicroArchitecture implements support for locking entries into - * the data and instruction cache. The following functions implement the core - * low level instructions needed to accomplish the locking. The developer's - * manual states that the code that performs the locking must be in non-cached - * memory. To accomplish this, the code in xscale-cache-lock.c copies the - * following functions from the cache into a non-cached memory region that - * is allocated through consistent_alloc(). - * - */ - .align 5 -/* - * xscale_icache_lock - * - * r0: starting address to lock - * r1: end address to lock - */ -ENTRY(xscale_icache_lock) - -iLockLoop: - bic r0, r0, #CACHELINESIZE - 1 - mcr p15, 0, r0, c9, c1, 0 @ lock into cache - cmp r0, r1 @ are we done? - add r0, r0, #CACHELINESIZE @ advance to next cache line - bls iLockLoop - mov pc, lr - -/* - * xscale_icache_unlock - */ -ENTRY(xscale_icache_unlock) - mcr p15, 0, r0, c9, c1, 1 @ Unlock icache - mov pc, lr - -/* - * xscale_dcache_lock - * - * r0: starting address to lock - * r1: end address to lock - */ -ENTRY(xscale_dcache_lock) - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov r2, #1 - mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode - cpwait ip @ Wait for completion - - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT -dLockLoop: - msr cpsr_c, r3 - mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty - mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line - msr cpsr_c, r2 - ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from - @ location [r0]. Post-increment - @ r3 to next cache line - cmp r0, r1 @ Are we done? - bls dLockLoop - - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov r2, #0 - mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode - cpwait_ret lr, ip - -/* - * xscale_dcache_unlock - */ -ENTRY(xscale_dcache_unlock) - mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mcr p15, 0, ip, c9, c2, 1 @ Unlock cache - mov pc, lr - -/* - * Needed to determine the length of the code that needs to be copied. - */ - .align 5 -ENTRY(xscale_cache_dummy) - mov pc, lr - -/* ================================ TLB LOCKING============================== - * - * The XScale MicroArchitecture implements support for locking entries into - * the Instruction and Data TLBs. The following functions provide the - * low level support for supporting these under Linux. xscale-lock.c - * implements some higher level management code. Most of the following - * is taken straight out of the Developer's Manual. - */ - -/* - * Lock I-TLB entry - * - * r0: Virtual address to translate and lock - */ - .align 5 -ENTRY(xscale_itlb_lock) - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT - msr cpsr_c, r3 @ Disable interrupts - mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry - mcr p15, 0, r0, c10, c4, 0 @ Translate and lock - msr cpsr_c, r2 @ Restore interrupts - cpwait_ret lr, ip - -/* - * Lock D-TLB entry - * - * r0: Virtual address to translate and lock - */ - .align 5 -ENTRY(xscale_dtlb_lock) - mrs r2, cpsr - orr r3, r2, #PSR_F_BIT | PSR_I_BIT - msr cpsr_c, r3 @ Disable interrupts - mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry - mcr p15, 0, r0, c10, c8, 0 @ Translate and lock - msr cpsr_c, r2 @ Restore interrupts - cpwait_ret lr, ip - -/* - * Unlock all I-TLB entries - */ - .align 5 -ENTRY(xscale_itlb_unlock) - mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB - mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB - cpwait_ret lr, ip - -/* - * Unlock all D-TLB entries - */ -ENTRY(xscale_dtlb_unlock) - mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL - mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB - cpwait_ret lr, ip - /* =============================== PageTable ============================== */ #define PTE_CACHE_WRITE_ALLOCATE 0 diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c index 7ffd8cb9bc96..c51d1386a97c 100644 --- a/arch/arm/nwfpe/double_cpdo.c +++ b/arch/arm/nwfpe/double_cpdo.c @@ -40,17 +40,17 @@ float64 float64_arccos(float64 rFm); float64 float64_pow(float64 rFn, float64 rFm); float64 float64_pol(float64 rFn, float64 rFm); -static float64 float64_rsf(float64 rFn, float64 rFm) +static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm) { - return float64_sub(rFm, rFn); + return float64_sub(roundData, rFm, rFn); } -static float64 float64_rdv(float64 rFn, float64 rFm) +static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm) { - return float64_div(rFm, rFn); + return float64_div(roundData, rFm, rFn); } -static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = { +static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = { [ADF_CODE >> 20] = float64_add, [MUF_CODE >> 20] = float64_mul, [SUF_CODE >> 20] = float64_sub, @@ -65,12 +65,12 @@ static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = { [FRD_CODE >> 20] = float64_rdv, }; -static float64 float64_mvf(float64 rFm) +static float64 float64_mvf(struct roundingData *roundData,float64 rFm) { return rFm; } -static float64 float64_mnf(float64 rFm) +static float64 float64_mnf(struct roundingData *roundData,float64 rFm) { union float64_components u; @@ -84,7 +84,7 @@ static float64 float64_mnf(float64 rFm) return u.f64; } -static float64 float64_abs(float64 rFm) +static float64 float64_abs(struct roundingData *roundData,float64 rFm) { union float64_components u; @@ -98,7 +98,7 @@ static float64 float64_abs(float64 rFm) return u.f64; } -static float64 (*const monadic_double[16])(float64 rFm) = { +static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = { [MVF_CODE >> 20] = float64_mvf, [MNF_CODE >> 20] = float64_mnf, [ABS_CODE >> 20] = float64_abs, @@ -108,7 +108,7 @@ static float64 (*const monadic_double[16])(float64 rFm) = { [NRM_CODE >> 20] = float64_mvf, }; -unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); float64 rFm; @@ -151,13 +151,13 @@ unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd) } if (dyadic_double[opc_mask_shift]) { - rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm); + rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_double[opc_mask_shift]) { - rFd->fDouble = monadic_double[opc_mask_shift](rFm); + rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c index c39f68a3449e..65a279ba927f 100644 --- a/arch/arm/nwfpe/extended_cpdo.c +++ b/arch/arm/nwfpe/extended_cpdo.c @@ -35,17 +35,17 @@ floatx80 floatx80_arccos(floatx80 rFm); floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm); floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm); -static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm) +static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm) { - return floatx80_sub(rFm, rFn); + return floatx80_sub(roundData, rFm, rFn); } -static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm) +static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm) { - return floatx80_div(rFm, rFn); + return floatx80_div(roundData, rFm, rFn); } -static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = { +static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = { [ADF_CODE >> 20] = floatx80_add, [MUF_CODE >> 20] = floatx80_mul, [SUF_CODE >> 20] = floatx80_sub, @@ -60,24 +60,24 @@ static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = { [FRD_CODE >> 20] = floatx80_rdv, }; -static floatx80 floatx80_mvf(floatx80 rFm) +static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm) { return rFm; } -static floatx80 floatx80_mnf(floatx80 rFm) +static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm) { rFm.high ^= 0x8000; return rFm; } -static floatx80 floatx80_abs(floatx80 rFm) +static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm) { rFm.high &= 0x7fff; return rFm; } -static floatx80 (*const monadic_extended[16])(floatx80 rFm) = { +static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = { [MVF_CODE >> 20] = floatx80_mvf, [MNF_CODE >> 20] = floatx80_mnf, [ABS_CODE >> 20] = floatx80_abs, @@ -87,7 +87,7 @@ static floatx80 (*const monadic_extended[16])(floatx80 rFm) = { [NRM_CODE >> 20] = floatx80_mvf, }; -unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); floatx80 rFm; @@ -138,13 +138,13 @@ unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd) } if (dyadic_extended[opc_mask_shift]) { - rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm); + rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_extended[opc_mask_shift]) { - rFd->fExtended = monadic_extended[opc_mask_shift](rFm); + rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index bf61696865ec..7690f731ee87 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -51,48 +51,42 @@ static void resetFPA11(void) fpa11->fpsr = FP_EMULATOR | BIT_AC; } -void SetRoundingMode(const unsigned int opcode) +int8 SetRoundingMode(const unsigned int opcode) { switch (opcode & MASK_ROUNDING_MODE) { default: case ROUND_TO_NEAREST: - float_rounding_mode = float_round_nearest_even; - break; + return float_round_nearest_even; case ROUND_TO_PLUS_INFINITY: - float_rounding_mode = float_round_up; - break; + return float_round_up; case ROUND_TO_MINUS_INFINITY: - float_rounding_mode = float_round_down; - break; + return float_round_down; case ROUND_TO_ZERO: - float_rounding_mode = float_round_to_zero; - break; + return float_round_to_zero; } } -void SetRoundingPrecision(const unsigned int opcode) +int8 SetRoundingPrecision(const unsigned int opcode) { #ifdef CONFIG_FPE_NWFPE_XP switch (opcode & MASK_ROUNDING_PRECISION) { case ROUND_SINGLE: - floatx80_rounding_precision = 32; - break; + return 32; case ROUND_DOUBLE: - floatx80_rounding_precision = 64; - break; + return 64; case ROUND_EXTENDED: - floatx80_rounding_precision = 80; - break; + return 80; default: - floatx80_rounding_precision = 80; + return 80; } #endif + return 80; } void nwfpe_init_fpa(union fp_state *fp) @@ -103,8 +97,6 @@ void nwfpe_init_fpa(union fp_state *fp) #endif memset(fpa11, 0, sizeof(FPA11)); resetFPA11(); - SetRoundingMode(ROUND_TO_NEAREST); - SetRoundingPrecision(ROUND_EXTENDED); fpa11->initflag = 1; } diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index e4a61aea534b..93523ae4b7a1 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -37,6 +37,13 @@ /* includes */ #include "fpsr.h" /* FP control and status register definitions */ #include "milieu.h" + +struct roundingData { + int8 mode; + int8 precision; + signed char exception; +}; + #include "softfloat.h" #define typeNone 0x00 @@ -84,8 +91,8 @@ typedef struct tagFPA11 { initialised. */ } FPA11; -extern void SetRoundingMode(const unsigned int); -extern void SetRoundingPrecision(const unsigned int); +extern int8 SetRoundingMode(const unsigned int); +extern int8 SetRoundingPrecision(const unsigned int); extern void nwfpe_init_fpa(union fp_state *fp); #endif diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c index 1bea67437b6f..4a31dfd94068 100644 --- a/arch/arm/nwfpe/fpa11_cpdo.c +++ b/arch/arm/nwfpe/fpa11_cpdo.c @@ -24,15 +24,16 @@ #include "fpa11.h" #include "fpopcode.h" -unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd); -unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd); -unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd); +unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); unsigned int EmulateCPDO(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); FPREG *rFd; unsigned int nType, nDest, nRc; + struct roundingData roundData; /* Get the destination size. If not valid let Linux perform an invalid instruction trap. */ @@ -40,7 +41,9 @@ unsigned int EmulateCPDO(const unsigned int opcode) if (typeNone == nDest) return 0; - SetRoundingMode(opcode); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; /* Compare the size of the operands in Fn and Fm. Choose the largest size and perform operations in that size, @@ -63,14 +66,14 @@ unsigned int EmulateCPDO(const unsigned int opcode) switch (nType) { case typeSingle: - nRc = SingleCPDO(opcode, rFd); + nRc = SingleCPDO(&roundData, opcode, rFd); break; case typeDouble: - nRc = DoubleCPDO(opcode, rFd); + nRc = DoubleCPDO(&roundData, opcode, rFd); break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - nRc = ExtendedCPDO(opcode, rFd); + nRc = ExtendedCPDO(&roundData, opcode, rFd); break; #endif default: @@ -93,9 +96,9 @@ unsigned int EmulateCPDO(const unsigned int opcode) case typeSingle: { if (typeDouble == nType) - rFd->fSingle = float64_to_float32(rFd->fDouble); + rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble); else - rFd->fSingle = floatx80_to_float32(rFd->fExtended); + rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended); } break; @@ -104,7 +107,7 @@ unsigned int EmulateCPDO(const unsigned int opcode) if (typeSingle == nType) rFd->fDouble = float32_to_float64(rFd->fSingle); else - rFd->fDouble = floatx80_to_float64(rFd->fExtended); + rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended); } break; @@ -121,12 +124,15 @@ unsigned int EmulateCPDO(const unsigned int opcode) #else if (nDest != nType) { if (nDest == typeSingle) - rFd->fSingle = float64_to_float32(rFd->fDouble); + rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble); else rFd->fDouble = float32_to_float64(rFd->fSingle); } #endif } + if (roundData.exception) + float_raise(roundData.exception); + return nRc; } diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index 95fb63fa9d18..b0db5cbcc3b1 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -96,7 +96,7 @@ static inline void loadMultiple(const unsigned int Fn, const unsigned int __user } } -static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) +static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem) { FPA11 *fpa11 = GET_FPA11(); union { @@ -106,12 +106,12 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) switch (fpa11->fType[Fn]) { case typeDouble: - val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble); + val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble); break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended); + val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended); break; #endif @@ -122,7 +122,7 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem) put_user(val.i[0], pMem); } -static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem) +static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem) { FPA11 *fpa11 = GET_FPA11(); union { @@ -137,7 +137,7 @@ static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem) #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: - val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended); + val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended); break; #endif @@ -259,8 +259,11 @@ unsigned int PerformSTF(const unsigned int opcode) { unsigned int __user *pBase, *pAddress, *pFinal; unsigned int nRc = 1, write_back = WRITE_BACK(opcode); + struct roundingData roundData; - SetRoundingMode(ROUND_TO_NEAREST); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; pBase = (unsigned int __user *) readRegister(getRn(opcode)); if (REG_PC == getRn(opcode)) { @@ -281,10 +284,10 @@ unsigned int PerformSTF(const unsigned int opcode) switch (opcode & MASK_TRANSFER_LENGTH) { case TRANSFER_SINGLE: - storeSingle(getFd(opcode), pAddress); + storeSingle(&roundData, getFd(opcode), pAddress); break; case TRANSFER_DOUBLE: - storeDouble(getFd(opcode), pAddress); + storeDouble(&roundData, getFd(opcode), pAddress); break; #ifdef CONFIG_FPE_NWFPE_XP case TRANSFER_EXTENDED: @@ -295,6 +298,9 @@ unsigned int PerformSTF(const unsigned int opcode) nRc = 0; } + if (roundData.exception) + float_raise(roundData.exception); + if (write_back) writeRegister(getRn(opcode), (unsigned long) pFinal); return nRc; diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index db01fbc97216..adf8d3000540 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -33,8 +33,6 @@ extern flag floatx80_is_nan(floatx80); extern flag float64_is_nan(float64); extern flag float32_is_nan(float32); -void SetRoundingMode(const unsigned int opcode); - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); @@ -77,14 +75,17 @@ unsigned int EmulateCPRT(const unsigned int opcode) unsigned int PerformFLT(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); - SetRoundingMode(opcode); - SetRoundingPrecision(opcode); + struct roundingData roundData; + + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; switch (opcode & MASK_ROUNDING_PRECISION) { case ROUND_SINGLE: { fpa11->fType[getFn(opcode)] = typeSingle; - fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode))); + fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode))); } break; @@ -108,6 +109,9 @@ unsigned int PerformFLT(const unsigned int opcode) return 0; } + if (roundData.exception) + float_raise(roundData.exception); + return 1; } @@ -115,26 +119,29 @@ unsigned int PerformFIX(const unsigned int opcode) { FPA11 *fpa11 = GET_FPA11(); unsigned int Fn = getFm(opcode); + struct roundingData roundData; - SetRoundingMode(opcode); + roundData.mode = SetRoundingMode(opcode); + roundData.precision = SetRoundingPrecision(opcode); + roundData.exception = 0; switch (fpa11->fType[Fn]) { case typeSingle: { - writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle)); + writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle)); } break; case typeDouble: { - writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble)); + writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble)); } break; #ifdef CONFIG_FPE_NWFPE_XP case typeExtended: { - writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended)); + writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended)); } break; #endif @@ -143,6 +150,9 @@ unsigned int PerformFIX(const unsigned int opcode) return 0; } + if (roundData.exception) + float_raise(roundData.exception); + return 1; } diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index 12885f31d347..2dfe1ac42ee8 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -116,8 +116,6 @@ fpmodule.c to integrate with the NetBSD kernel (I hope!). code to access data in user space in some other source files at the moment (grep for get_user / put_user calls). --philb] -float_exception_flags is a global variable in SoftFloat. - This function is called by the SoftFloat routines to raise a floating point exception. We check the trap enable byte in the FPSR, and raise a SIGFPE exception if necessary. If not the relevant bits in the @@ -129,15 +127,14 @@ void float_raise(signed char flags) register unsigned int fpsr, cumulativeTraps; #ifdef CONFIG_DEBUG_USER - printk(KERN_DEBUG - "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", - current->comm, current->pid, flags, - __builtin_return_address(0), GET_USERREG()->ARM_pc); + /* Ignore inexact errors as there are far too many of them to log */ + if (flags & ~BIT_IXC) + printk(KERN_DEBUG + "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", + current->comm, current->pid, flags, + __builtin_return_address(0), GET_USERREG()->ARM_pc); #endif - /* Keep SoftFloat exception flags up to date. */ - float_exception_flags |= flags; - /* Read fpsr and initialize the cumulativeTraps. */ fpsr = readFPSR(); cumulativeTraps = 0; diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c index 705808e88d9d..c66981d682cf 100644 --- a/arch/arm/nwfpe/single_cpdo.c +++ b/arch/arm/nwfpe/single_cpdo.c @@ -36,17 +36,17 @@ float32 float32_arccos(float32 rFm); float32 float32_pow(float32 rFn, float32 rFm); float32 float32_pol(float32 rFn, float32 rFm); -static float32 float32_rsf(float32 rFn, float32 rFm) +static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm) { - return float32_sub(rFm, rFn); + return float32_sub(roundData, rFm, rFn); } -static float32 float32_rdv(float32 rFn, float32 rFm) +static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm) { - return float32_div(rFm, rFn); + return float32_div(roundData, rFm, rFn); } -static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = { +static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = { [ADF_CODE >> 20] = float32_add, [MUF_CODE >> 20] = float32_mul, [SUF_CODE >> 20] = float32_sub, @@ -60,22 +60,22 @@ static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = { [FRD_CODE >> 20] = float32_rdv, }; -static float32 float32_mvf(float32 rFm) +static float32 float32_mvf(struct roundingData *roundData, float32 rFm) { return rFm; } -static float32 float32_mnf(float32 rFm) +static float32 float32_mnf(struct roundingData *roundData, float32 rFm) { return rFm ^ 0x80000000; } -static float32 float32_abs(float32 rFm) +static float32 float32_abs(struct roundingData *roundData, float32 rFm) { return rFm & 0x7fffffff; } -static float32 (*const monadic_single[16])(float32 rFm) = { +static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = { [MVF_CODE >> 20] = float32_mvf, [MNF_CODE >> 20] = float32_mnf, [ABS_CODE >> 20] = float32_abs, @@ -85,7 +85,7 @@ static float32 (*const monadic_single[16])(float32 rFm) = { [NRM_CODE >> 20] = float32_mvf, }; -unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd) +unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd) { FPA11 *fpa11 = GET_FPA11(); float32 rFm; @@ -108,13 +108,13 @@ unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd) if (fpa11->fType[Fn] == typeSingle && dyadic_single[opc_mask_shift]) { rFn = fpa11->fpreg[Fn].fSingle; - rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm); + rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm); } else { return 0; } } else { if (monadic_single[opc_mask_shift]) { - rFd->fSingle = monadic_single[opc_mask_shift](rFm); + rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm); } else { return 0; } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index e038dd3be9b3..8b75a6e7cb3a 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -34,16 +34,6 @@ this code that are retained. //#include "milieu.h" //#include "softfloat.h" -/* -------------------------------------------------------------------------------- -Floating-point rounding mode, extended double-precision rounding precision, -and exception flags. -------------------------------------------------------------------------------- -*/ -int8 float_rounding_mode = float_round_nearest_even; -int8 floatx80_rounding_precision = 80; -int8 float_exception_flags; - /* ------------------------------------------------------------------------------- Primitive arithmetic functions, including multi-word arithmetic, and @@ -77,14 +67,14 @@ input is too large, however, the invalid exception is raised and the largest positive or negative integer is returned. ------------------------------------------------------------------------------- */ -static int32 roundAndPackInt32( flag zSign, bits64 absZ ) +static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ ) { int8 roundingMode; flag roundNearestEven; int8 roundIncrement, roundBits; int32 z; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x40; if ( ! roundNearestEven ) { @@ -107,10 +97,10 @@ static int32 roundAndPackInt32( flag zSign, bits64 absZ ) z = absZ; if ( zSign ) z = - z; if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) { - float_exception_flags |= float_flag_invalid; + roundData->exception |= float_flag_invalid; return zSign ? 0x80000000 : 0x7FFFFFFF; } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; return z; } @@ -224,14 +214,14 @@ The handling of underflow and overflow follows the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) +static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig ) { int8 roundingMode; flag roundNearestEven; int8 roundIncrement, roundBits; flag isTiny; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x40; if ( ! roundNearestEven ) { @@ -254,7 +244,7 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) || ( ( zExp == 0xFD ) && ( (sbits32) ( zSig + roundIncrement ) < 0 ) ) ) { - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 ); } if ( zExp < 0 ) { @@ -265,10 +255,10 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) shift32RightJamming( zSig, - zExp, &zSig ); zExp = 0; roundBits = zSig & 0x7F; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig = ( zSig + roundIncrement )>>7; zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven ); if ( zSig == 0 ) zExp = 0; @@ -287,12 +277,12 @@ point exponent. ------------------------------------------------------------------------------- */ static float32 - normalizeRoundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig ) + normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig ) { int8 shiftCount; shiftCount = countLeadingZeros32( zSig ) - 1; - return roundAndPackFloat32( zSign, zExp - shiftCount, zSig<mode; roundNearestEven = ( roundingMode == float_round_nearest_even ); roundIncrement = 0x200; if ( ! roundNearestEven ) { @@ -427,7 +417,7 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) ) { //register int lr = __builtin_return_address(0); //printk("roundAndPackFloat64 called from 0x%08x\n",lr); - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 ); } if ( zExp < 0 ) { @@ -438,10 +428,10 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) shift64RightJamming( zSig, - zExp, &zSig ); zExp = 0; roundBits = zSig & 0x3FF; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig = ( zSig + roundIncrement )>>10; zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven ); if ( zSig == 0 ) zExp = 0; @@ -460,12 +450,12 @@ point exponent. ------------------------------------------------------------------------------- */ static float64 - normalizeRoundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig ) + normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig ) { int8 shiftCount; shiftCount = countLeadingZeros64( zSig ) - 1; - return roundAndPackFloat64( zSign, zExp - shiftCount, zSig<mode; + roundingPrecision = roundData->precision; roundNearestEven = ( roundingMode == float_round_nearest_even ); if ( roundingPrecision == 80 ) goto precision80; if ( roundingPrecision == 64 ) { @@ -623,8 +614,8 @@ static floatx80 shift64RightJamming( zSig0, 1 - zExp, &zSig0 ); zExp = 0; roundBits = zSig0 & roundMask; - if ( isTiny && roundBits ) float_raise( float_flag_underflow ); - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig0 += roundIncrement; if ( (sbits64) zSig0 < 0 ) zExp = 1; roundIncrement = roundMask + 1; @@ -635,7 +626,7 @@ static floatx80 return packFloatx80( zSign, zExp, zSig0 ); } } - if ( roundBits ) float_exception_flags |= float_flag_inexact; + if ( roundBits ) roundData->exception |= float_flag_inexact; zSig0 += roundIncrement; if ( zSig0 < roundIncrement ) { ++zExp; @@ -672,7 +663,7 @@ static floatx80 ) { roundMask = 0; overflow: - float_raise( float_flag_overflow | float_flag_inexact ); + roundData->exception |= float_flag_overflow | float_flag_inexact; if ( ( roundingMode == float_round_to_zero ) || ( zSign && ( roundingMode == float_round_up ) ) || ( ! zSign && ( roundingMode == float_round_down ) ) @@ -689,8 +680,8 @@ static floatx80 || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) ); shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 ); zExp = 0; - if ( isTiny && zSig1 ) float_raise( float_flag_underflow ); - if ( zSig1 ) float_exception_flags |= float_flag_inexact; + if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow; + if ( zSig1 ) roundData->exception |= float_flag_inexact; if ( roundNearestEven ) { increment = ( (sbits64) zSig1 < 0 ); } @@ -710,7 +701,7 @@ static floatx80 return packFloatx80( zSign, zExp, zSig0 ); } } - if ( zSig1 ) float_exception_flags |= float_flag_inexact; + if ( zSig1 ) roundData->exception |= float_flag_inexact; if ( increment ) { ++zSig0; if ( zSig0 == 0 ) { @@ -740,7 +731,7 @@ normalized. */ static floatx80 normalizeRoundAndPackFloatx80( - int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 + struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1 ) { int8 shiftCount; @@ -754,7 +745,7 @@ static floatx80 shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 ); zExp -= shiftCount; return - roundAndPackFloatx80( roundingPrecision, zSign, zExp, zSig0, zSig1 ); + roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 ); } @@ -767,14 +758,14 @@ the single-precision floating-point format. The conversion is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 int32_to_float32( int32 a ) +float32 int32_to_float32(struct roundingData *roundData, int32 a) { flag zSign; if ( a == 0 ) return 0; if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 ); zSign = ( a < 0 ); - return normalizeRoundAndPackFloat32( zSign, 0x9C, zSign ? - a : a ); + return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a ); } @@ -840,7 +831,7 @@ positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 float32_to_int32( float32 a ) +int32 float32_to_int32( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp, shiftCount; @@ -856,7 +847,7 @@ int32 float32_to_int32( float32 a ) zSig = aSig; zSig <<= 32; if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig ); - return roundAndPackInt32( aSign, zSig ); + return roundAndPackInt32( roundData, aSign, zSig ); } @@ -889,13 +880,13 @@ int32 float32_to_int32_round_to_zero( float32 a ) return 0x80000000; } else if ( aExp <= 0x7E ) { - if ( aExp | aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp | aSig ) float_raise( float_flag_inexact ); return 0; } aSig = ( aSig | 0x00800000 )<<8; z = aSig>>( - shiftCount ); if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) { - float_exception_flags |= float_flag_inexact; + float_raise( float_flag_inexact ); } return aSign ? - z : z; @@ -973,7 +964,7 @@ operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_round_to_int( float32 a ) +float32 float32_round_to_int( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp; @@ -988,11 +979,12 @@ float32 float32_round_to_int( float32 a ) } return a; } + roundingMode = roundData->mode; if ( aExp <= 0x7E ) { if ( (bits32) ( a<<1 ) == 0 ) return a; - float_exception_flags |= float_flag_inexact; + roundData->exception |= float_flag_inexact; aSign = extractFloat32Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundingMode ) { case float_round_nearest_even: if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) { return packFloat32( aSign, 0x7F, 0 ); @@ -1009,7 +1001,6 @@ float32 float32_round_to_int( float32 a ) lastBitMask <<= 0x96 - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; if ( roundingMode == float_round_nearest_even ) { z += lastBitMask>>1; if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask; @@ -1020,7 +1011,7 @@ float32 float32_round_to_int( float32 a ) } } z &= ~ roundBitsMask; - if ( z != a ) float_exception_flags |= float_flag_inexact; + if ( z != a ) roundData->exception |= float_flag_inexact; return z; } @@ -1034,7 +1025,7 @@ addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 addFloat32Sigs( float32 a, float32 b, flag zSign ) +static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign ) { int16 aExp, bExp, zExp; bits32 aSig, bSig, zSig; @@ -1093,7 +1084,7 @@ static float32 addFloat32Sigs( float32 a, float32 b, flag zSign ) ++zExp; } roundAndPack: - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1106,7 +1097,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) +static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign ) { int16 aExp, bExp, zExp; bits32 aSig, bSig, zSig; @@ -1123,7 +1114,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) if ( expDiff < 0 ) goto bExpBigger; if ( aExp == 0xFF ) { if ( aSig | bSig ) return propagateFloat32NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aExp == 0 ) { @@ -1132,7 +1123,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) } if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloat32( float_rounding_mode == float_round_down, 0, 0 ); + return packFloat32( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); @@ -1169,7 +1160,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign ) zExp = aExp; normalizeRoundAndPack: --zExp; - return normalizeRoundAndPackFloat32( zSign, zExp, zSig ); + return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1180,17 +1171,17 @@ and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_add( float32 a, float32 b ) +float32 float32_add( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign; aSign = extractFloat32Sign( a ); bSign = extractFloat32Sign( b ); if ( aSign == bSign ) { - return addFloat32Sigs( a, b, aSign ); + return addFloat32Sigs( roundData, a, b, aSign ); } else { - return subFloat32Sigs( a, b, aSign ); + return subFloat32Sigs( roundData, a, b, aSign ); } } @@ -1202,17 +1193,17 @@ Returns the result of subtracting the single-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_sub( float32 a, float32 b ) +float32 float32_sub( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign; aSign = extractFloat32Sign( a ); bSign = extractFloat32Sign( b ); if ( aSign == bSign ) { - return subFloat32Sigs( a, b, aSign ); + return subFloat32Sigs( roundData, a, b, aSign ); } else { - return addFloat32Sigs( a, b, aSign ); + return addFloat32Sigs( roundData, a, b, aSign ); } } @@ -1224,7 +1215,7 @@ Returns the result of multiplying the single-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_mul( float32 a, float32 b ) +float32 float32_mul( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -1244,7 +1235,7 @@ float32 float32_mul( float32 a, float32 b ) return propagateFloat32NaN( a, b ); } if ( ( bExp | bSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1252,7 +1243,7 @@ float32 float32_mul( float32 a, float32 b ) if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1274,7 +1265,7 @@ float32 float32_mul( float32 a, float32 b ) zSig <<= 1; --zExp; } - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1285,7 +1276,7 @@ by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_div( float32 a, float32 b ) +float32 float32_div( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -1302,7 +1293,7 @@ float32 float32_div( float32 a, float32 b ) if ( aSig ) return propagateFloat32NaN( a, b ); if ( bExp == 0xFF ) { if ( bSig ) return propagateFloat32NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } return packFloat32( zSign, 0xFF, 0 ); @@ -1314,10 +1305,10 @@ float32 float32_div( float32 a, float32 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloat32( zSign, 0xFF, 0 ); } normalizeFloat32Subnormal( bSig, &bExp, &bSig ); @@ -1341,7 +1332,7 @@ float32 float32_div( float32 a, float32 b ) if ( ( zSig & 0x3F ) == 0 ) { zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 ); } - return roundAndPackFloat32( zSign, zExp, zSig ); + return roundAndPackFloat32( roundData, zSign, zExp, zSig ); } @@ -1352,7 +1343,7 @@ with respect to the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_rem( float32 a, float32 b ) +float32 float32_rem( struct roundingData *roundData, float32 a, float32 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, expDiff; @@ -1372,7 +1363,7 @@ float32 float32_rem( float32 a, float32 b ) if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) { return propagateFloat32NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( bExp == 0xFF ) { @@ -1381,7 +1372,7 @@ float32 float32_rem( float32 a, float32 b ) } if ( bExp == 0 ) { if ( bSig == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } normalizeFloat32Subnormal( bSig, &bExp, &bSig ); @@ -1444,7 +1435,7 @@ float32 float32_rem( float32 a, float32 b ) } zSign = ( (sbits32) aSig < 0 ); if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat32( aSign ^ zSign, bExp, aSig ); + return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig ); } @@ -1455,7 +1446,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float32 float32_sqrt( float32 a ) +float32 float32_sqrt( struct roundingData *roundData, float32 a ) { flag aSign; int16 aExp, zExp; @@ -1468,12 +1459,12 @@ float32 float32_sqrt( float32 a ) if ( aExp == 0xFF ) { if ( aSig ) return propagateFloat32NaN( a, 0 ); if ( ! aSign ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aSign ) { if ( ( aExp | aSig ) == 0 ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float32_default_nan; } if ( aExp == 0 ) { @@ -1499,7 +1490,7 @@ float32 float32_sqrt( float32 a ) } } shift32RightJamming( zSig, 1, &zSig ); - return roundAndPackFloat32( 0, zExp, zSig ); + return roundAndPackFloat32( roundData, 0, zExp, zSig ); } @@ -1661,7 +1652,7 @@ positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 float64_to_int32( float64 a ) +int32 float64_to_int32( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp, shiftCount; @@ -1674,7 +1665,7 @@ int32 float64_to_int32( float64 a ) if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); shiftCount = 0x42C - aExp; if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32( aSign, aSig ); + return roundAndPackInt32( roundData, aSign, aSig ); } @@ -1705,7 +1696,7 @@ int32 float64_to_int32_round_to_zero( float64 a ) goto invalid; } else if ( 52 < shiftCount ) { - if ( aExp || aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp || aSig ) float_raise( float_flag_inexact ); return 0; } aSig |= LIT64( 0x0010000000000000 ); @@ -1715,11 +1706,11 @@ int32 float64_to_int32_round_to_zero( float64 a ) if ( aSign ) z = - z; if ( ( z < 0 ) ^ aSign ) { invalid: - float_exception_flags |= float_flag_invalid; + float_raise( float_flag_invalid ); return aSign ? 0x80000000 : 0x7FFFFFFF; } if ( ( aSig<exception |= float_flag_inexact; aSign = extractFloat64Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundData->mode ) { case float_round_nearest_even: if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) { return packFloat64( aSign, 0x3FF, 0 ); @@ -1909,7 +1900,7 @@ float64 float64_round_to_int( float64 a ) lastBitMask <<= 0x433 - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; if ( roundingMode == float_round_nearest_even ) { z += lastBitMask>>1; if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask; @@ -1920,7 +1911,7 @@ float64 float64_round_to_int( float64 a ) } } z &= ~ roundBitsMask; - if ( z != a ) float_exception_flags |= float_flag_inexact; + if ( z != a ) roundData->exception |= float_flag_inexact; return z; } @@ -1934,7 +1925,7 @@ addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float64 addFloat64Sigs( float64 a, float64 b, flag zSign ) +static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign ) { int16 aExp, bExp, zExp; bits64 aSig, bSig, zSig; @@ -1993,7 +1984,7 @@ static float64 addFloat64Sigs( float64 a, float64 b, flag zSign ) ++zExp; } roundAndPack: - return roundAndPackFloat64( zSign, zExp, zSig ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -2006,7 +1997,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) +static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign ) { int16 aExp, bExp, zExp; bits64 aSig, bSig, zSig; @@ -2023,7 +2014,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) if ( expDiff < 0 ) goto bExpBigger; if ( aExp == 0x7FF ) { if ( aSig | bSig ) return propagateFloat64NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aExp == 0 ) { @@ -2032,7 +2023,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) } if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloat64( float_rounding_mode == float_round_down, 0, 0 ); + return packFloat64( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); @@ -2069,7 +2060,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign ) zExp = aExp; normalizeRoundAndPack: --zExp; - return normalizeRoundAndPackFloat64( zSign, zExp, zSig ); + return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -2080,17 +2071,17 @@ and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_add( float64 a, float64 b ) +float64 float64_add( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign; aSign = extractFloat64Sign( a ); bSign = extractFloat64Sign( b ); if ( aSign == bSign ) { - return addFloat64Sigs( a, b, aSign ); + return addFloat64Sigs( roundData, a, b, aSign ); } else { - return subFloat64Sigs( a, b, aSign ); + return subFloat64Sigs( roundData, a, b, aSign ); } } @@ -2102,17 +2093,17 @@ Returns the result of subtracting the double-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_sub( float64 a, float64 b ) +float64 float64_sub( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign; aSign = extractFloat64Sign( a ); bSign = extractFloat64Sign( b ); if ( aSign == bSign ) { - return subFloat64Sigs( a, b, aSign ); + return subFloat64Sigs( roundData, a, b, aSign ); } else { - return addFloat64Sigs( a, b, aSign ); + return addFloat64Sigs( roundData, a, b, aSign ); } } @@ -2124,7 +2115,7 @@ Returns the result of multiplying the double-precision floating-point values for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_mul( float64 a, float64 b ) +float64 float64_mul( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -2142,7 +2133,7 @@ float64 float64_mul( float64 a, float64 b ) return propagateFloat64NaN( a, b ); } if ( ( bExp | bSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2150,7 +2141,7 @@ float64 float64_mul( float64 a, float64 b ) if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2172,7 +2163,7 @@ float64 float64_mul( float64 a, float64 b ) zSig0 <<= 1; --zExp; } - return roundAndPackFloat64( zSign, zExp, zSig0 ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig0 ); } @@ -2183,7 +2174,7 @@ by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_div( float64 a, float64 b ) +float64 float64_div( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, zExp; @@ -2202,7 +2193,7 @@ float64 float64_div( float64 a, float64 b ) if ( aSig ) return propagateFloat64NaN( a, b ); if ( bExp == 0x7FF ) { if ( bSig ) return propagateFloat64NaN( a, b ); - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } return packFloat64( zSign, 0x7FF, 0 ); @@ -2214,10 +2205,10 @@ float64 float64_div( float64 a, float64 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloat64( zSign, 0x7FF, 0 ); } normalizeFloat64Subnormal( bSig, &bExp, &bSig ); @@ -2243,7 +2234,7 @@ float64 float64_div( float64 a, float64 b ) } zSig |= ( rem1 != 0 ); } - return roundAndPackFloat64( zSign, zExp, zSig ); + return roundAndPackFloat64( roundData, zSign, zExp, zSig ); } @@ -2254,7 +2245,7 @@ with respect to the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_rem( float64 a, float64 b ) +float64 float64_rem( struct roundingData *roundData, float64 a, float64 b ) { flag aSign, bSign, zSign; int16 aExp, bExp, expDiff; @@ -2272,7 +2263,7 @@ float64 float64_rem( float64 a, float64 b ) if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) { return propagateFloat64NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( bExp == 0x7FF ) { @@ -2281,7 +2272,7 @@ float64 float64_rem( float64 a, float64 b ) } if ( bExp == 0 ) { if ( bSig == 0 ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } normalizeFloat64Subnormal( bSig, &bExp, &bSig ); @@ -2329,7 +2320,7 @@ float64 float64_rem( float64 a, float64 b ) } zSign = ( (sbits64) aSig < 0 ); if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat64( aSign ^ zSign, bExp, aSig ); + return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig ); } @@ -2340,7 +2331,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -float64 float64_sqrt( float64 a ) +float64 float64_sqrt( struct roundingData *roundData, float64 a ) { flag aSign; int16 aExp, zExp; @@ -2354,12 +2345,12 @@ float64 float64_sqrt( float64 a ) if ( aExp == 0x7FF ) { if ( aSig ) return propagateFloat64NaN( a, a ); if ( ! aSign ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aSign ) { if ( ( aExp | aSig ) == 0 ) return a; - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return float64_default_nan; } if ( aExp == 0 ) { @@ -2390,7 +2381,7 @@ float64 float64_sqrt( float64 a ) } } shift64RightJamming( zSig, 1, &zSig ); - return roundAndPackFloat64( 0, zExp, zSig ); + return roundAndPackFloat64( roundData, 0, zExp, zSig ); } @@ -2554,7 +2545,7 @@ largest positive integer is returned. Otherwise, if the conversion overflows, the largest integer with the same sign as `a' is returned. ------------------------------------------------------------------------------- */ -int32 floatx80_to_int32( floatx80 a ) +int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp, shiftCount; @@ -2567,7 +2558,7 @@ int32 floatx80_to_int32( floatx80 a ) shiftCount = 0x4037 - aExp; if ( shiftCount <= 0 ) shiftCount = 1; shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32( aSign, aSig ); + return roundAndPackInt32( roundData, aSign, aSig ); } @@ -2598,7 +2589,7 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a ) goto invalid; } else if ( 63 < shiftCount ) { - if ( aExp || aSig ) float_exception_flags |= float_flag_inexact; + if ( aExp || aSig ) float_raise( float_flag_inexact ); return 0; } savedASig = aSig; @@ -2607,11 +2598,11 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a ) if ( aSign ) z = - z; if ( ( z < 0 ) ^ aSign ) { invalid: - float_exception_flags |= float_flag_invalid; + float_raise( float_flag_invalid ); return aSign ? 0x80000000 : 0x7FFFFFFF; } if ( ( aSig<exception |= float_flag_inexact; aSign = extractFloatx80Sign( a ); - switch ( float_rounding_mode ) { + switch ( roundData->mode ) { case float_round_nearest_even: if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 ) ) { @@ -2729,7 +2720,7 @@ floatx80 floatx80_round_to_int( floatx80 a ) lastBitMask <<= 0x403E - aExp; roundBitsMask = lastBitMask - 1; z = a; - roundingMode = float_rounding_mode; + roundingMode = roundData->mode; if ( roundingMode == float_round_nearest_even ) { z.low += lastBitMask>>1; if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask; @@ -2744,7 +2735,7 @@ floatx80 floatx80_round_to_int( floatx80 a ) ++z.high; z.low = LIT64( 0x8000000000000000 ); } - if ( z.low != a.low ) float_exception_flags |= float_flag_inexact; + if ( z.low != a.low ) roundData->exception |= float_flag_inexact; return z; } @@ -2758,7 +2749,7 @@ The addition is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) +static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign ) { int32 aExp, bExp, zExp; bits64 aSig, bSig, zSig0, zSig1; @@ -2814,7 +2805,7 @@ static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) roundAndPack: return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2827,7 +2818,7 @@ result is a NaN. The subtraction is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) +static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign ) { int32 aExp, bExp, zExp; bits64 aSig, bSig, zSig0, zSig1; @@ -2845,7 +2836,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) if ( (bits64) ( ( aSig | bSig )<<1 ) ) { return propagateFloatx80NaN( a, b ); } - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -2857,7 +2848,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) zSig1 = 0; if ( bSig < aSig ) goto aBigger; if ( aSig < bSig ) goto bBigger; - return packFloatx80( float_rounding_mode == float_round_down, 0, 0 ); + return packFloatx80( roundData->mode == float_round_down, 0, 0 ); bExpBigger: if ( bExp == 0x7FFF ) { if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b ); @@ -2883,7 +2874,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign ) normalizeRoundAndPack: return normalizeRoundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2894,17 +2885,17 @@ values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_add( floatx80 a, floatx80 b ) +floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign; aSign = extractFloatx80Sign( a ); bSign = extractFloatx80Sign( b ); if ( aSign == bSign ) { - return addFloatx80Sigs( a, b, aSign ); + return addFloatx80Sigs( roundData, a, b, aSign ); } else { - return subFloatx80Sigs( a, b, aSign ); + return subFloatx80Sigs( roundData, a, b, aSign ); } } @@ -2916,17 +2907,17 @@ point values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_sub( floatx80 a, floatx80 b ) +floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign; aSign = extractFloatx80Sign( a ); bSign = extractFloatx80Sign( b ); if ( aSign == bSign ) { - return subFloatx80Sigs( a, b, aSign ); + return subFloatx80Sigs( roundData, a, b, aSign ); } else { - return addFloatx80Sigs( a, b, aSign ); + return addFloatx80Sigs( roundData, a, b, aSign ); } } @@ -2938,7 +2929,7 @@ point values `a' and `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_mul( floatx80 a, floatx80 b ) +floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, zExp; @@ -2964,7 +2955,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b ) if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b ); if ( ( aExp | aSig ) == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -2987,7 +2978,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b ) } return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -2998,7 +2989,7 @@ value `a' by the corresponding value `b'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_div( floatx80 a, floatx80 b ) +floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, zExp; @@ -3029,12 +3020,12 @@ floatx80 floatx80_div( floatx80 a, floatx80 b ) if ( bSig == 0 ) { if ( ( aExp | aSig ) == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; } - float_raise( float_flag_divbyzero ); + roundData->exception |= float_flag_divbyzero; return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); } normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); @@ -3068,7 +3059,7 @@ floatx80 floatx80_div( floatx80 a, floatx80 b ) } return roundAndPackFloatx80( - floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 ); + roundData, zSign, zExp, zSig0, zSig1 ); } @@ -3079,7 +3070,7 @@ Returns the remainder of the extended double-precision floating-point value according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_rem( floatx80 a, floatx80 b ) +floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b ) { flag aSign, bSign, zSign; int32 aExp, bExp, expDiff; @@ -3107,7 +3098,7 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b ) if ( bExp == 0 ) { if ( bSig == 0 ) { invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -3164,9 +3155,10 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b ) aSig1 = alternateASig1; zSign = ! zSign; } + return normalizeRoundAndPackFloatx80( - 80, zSign, bExp + expDiff, aSig0, aSig1 ); + roundData, zSign, bExp + expDiff, aSig0, aSig1 ); } @@ -3177,7 +3169,7 @@ value `a'. The operation is performed according to the IEC/IEEE Standard for Binary Floating-point Arithmetic. ------------------------------------------------------------------------------- */ -floatx80 floatx80_sqrt( floatx80 a ) +floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a ) { flag aSign; int32 aExp, zExp; @@ -3197,7 +3189,7 @@ floatx80 floatx80_sqrt( floatx80 a ) if ( aSign ) { if ( ( aExp | aSig0 ) == 0 ) return a; invalid: - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; return z; @@ -3242,7 +3234,7 @@ floatx80 floatx80_sqrt( floatx80 a ) } return roundAndPackFloatx80( - floatx80_rounding_precision, 0, zExp, zSig0, zSig1 ); + roundData, 0, zExp, zSig0, zSig1 ); } @@ -3264,7 +3256,7 @@ flag floatx80_eq( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } @@ -3294,7 +3286,7 @@ flag floatx80_le( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } aSign = extractFloatx80Sign( a ); @@ -3328,7 +3320,7 @@ flag floatx80_lt( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } aSign = extractFloatx80Sign( a ); @@ -3361,7 +3353,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b ) || ( ( extractFloatx80Exp( b ) == 0x7FFF ) && (bits64) ( extractFloatx80Frac( b )<<1 ) ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; return 0; } return @@ -3392,7 +3384,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } @@ -3429,7 +3421,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b ) ) { if ( floatx80_is_signaling_nan( a ) || floatx80_is_signaling_nan( b ) ) { - float_raise( float_flag_invalid ); + roundData->exception |= float_flag_invalid; } return 0; } diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 1e1743173899..1c8799b9ee4d 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -74,7 +74,7 @@ enum { Software IEC/IEEE floating-point rounding mode. ------------------------------------------------------------------------------- */ -extern signed char float_rounding_mode; +//extern int8 float_rounding_mode; enum { float_round_nearest_even = 0, float_round_to_zero = 1, @@ -86,7 +86,6 @@ enum { ------------------------------------------------------------------------------- Software IEC/IEEE floating-point exception flags. ------------------------------------------------------------------------------- -extern signed char float_exception_flags; enum { float_flag_inexact = 1, float_flag_underflow = 2, @@ -99,7 +98,6 @@ ScottB: November 4, 1998 Changed the enumeration to match the bit order in the FPA11. */ -extern signed char float_exception_flags; enum { float_flag_invalid = 1, float_flag_divbyzero = 2, @@ -121,7 +119,7 @@ void float_raise( signed char ); Software IEC/IEEE integer-to-floating-point conversion routines. ------------------------------------------------------------------------------- */ -float32 int32_to_float32( signed int ); +float32 int32_to_float32( struct roundingData *, signed int ); float64 int32_to_float64( signed int ); #ifdef FLOATX80 floatx80 int32_to_floatx80( signed int ); @@ -132,7 +130,7 @@ floatx80 int32_to_floatx80( signed int ); Software IEC/IEEE single-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int float32_to_int32( float32 ); +signed int float32_to_int32( struct roundingData *, float32 ); signed int float32_to_int32_round_to_zero( float32 ); float64 float32_to_float64( float32 ); #ifdef FLOATX80 @@ -144,13 +142,13 @@ floatx80 float32_to_floatx80( float32 ); Software IEC/IEEE single-precision operations. ------------------------------------------------------------------------------- */ -float32 float32_round_to_int( float32 ); -float32 float32_add( float32, float32 ); -float32 float32_sub( float32, float32 ); -float32 float32_mul( float32, float32 ); -float32 float32_div( float32, float32 ); -float32 float32_rem( float32, float32 ); -float32 float32_sqrt( float32 ); +float32 float32_round_to_int( struct roundingData*, float32 ); +float32 float32_add( struct roundingData *, float32, float32 ); +float32 float32_sub( struct roundingData *, float32, float32 ); +float32 float32_mul( struct roundingData *, float32, float32 ); +float32 float32_div( struct roundingData *, float32, float32 ); +float32 float32_rem( struct roundingData *, float32, float32 ); +float32 float32_sqrt( struct roundingData*, float32 ); char float32_eq( float32, float32 ); char float32_le( float32, float32 ); char float32_lt( float32, float32 ); @@ -164,9 +162,9 @@ char float32_is_signaling_nan( float32 ); Software IEC/IEEE double-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int float64_to_int32( float64 ); +signed int float64_to_int32( struct roundingData *, float64 ); signed int float64_to_int32_round_to_zero( float64 ); -float32 float64_to_float32( float64 ); +float32 float64_to_float32( struct roundingData *, float64 ); #ifdef FLOATX80 floatx80 float64_to_floatx80( float64 ); #endif @@ -176,13 +174,13 @@ floatx80 float64_to_floatx80( float64 ); Software IEC/IEEE double-precision operations. ------------------------------------------------------------------------------- */ -float64 float64_round_to_int( float64 ); -float64 float64_add( float64, float64 ); -float64 float64_sub( float64, float64 ); -float64 float64_mul( float64, float64 ); -float64 float64_div( float64, float64 ); -float64 float64_rem( float64, float64 ); -float64 float64_sqrt( float64 ); +float64 float64_round_to_int( struct roundingData *, float64 ); +float64 float64_add( struct roundingData *, float64, float64 ); +float64 float64_sub( struct roundingData *, float64, float64 ); +float64 float64_mul( struct roundingData *, float64, float64 ); +float64 float64_div( struct roundingData *, float64, float64 ); +float64 float64_rem( struct roundingData *, float64, float64 ); +float64 float64_sqrt( struct roundingData *, float64 ); char float64_eq( float64, float64 ); char float64_le( float64, float64 ); char float64_lt( float64, float64 ); @@ -198,31 +196,23 @@ char float64_is_signaling_nan( float64 ); Software IEC/IEEE extended double-precision conversion routines. ------------------------------------------------------------------------------- */ -signed int floatx80_to_int32( floatx80 ); +signed int floatx80_to_int32( struct roundingData *, floatx80 ); signed int floatx80_to_int32_round_to_zero( floatx80 ); -float32 floatx80_to_float32( floatx80 ); -float64 floatx80_to_float64( floatx80 ); - -/* -------------------------------------------------------------------------------- -Software IEC/IEEE extended double-precision rounding precision. Valid -values are 32, 64, and 80. -------------------------------------------------------------------------------- -*/ -extern signed char floatx80_rounding_precision; +float32 floatx80_to_float32( struct roundingData *, floatx80 ); +float64 floatx80_to_float64( struct roundingData *, floatx80 ); /* ------------------------------------------------------------------------------- Software IEC/IEEE extended double-precision operations. ------------------------------------------------------------------------------- */ -floatx80 floatx80_round_to_int( floatx80 ); -floatx80 floatx80_add( floatx80, floatx80 ); -floatx80 floatx80_sub( floatx80, floatx80 ); -floatx80 floatx80_mul( floatx80, floatx80 ); -floatx80 floatx80_div( floatx80, floatx80 ); -floatx80 floatx80_rem( floatx80, floatx80 ); -floatx80 floatx80_sqrt( floatx80 ); +floatx80 floatx80_round_to_int( struct roundingData *, floatx80 ); +floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 ); +floatx80 floatx80_sqrt( struct roundingData *, floatx80 ); char floatx80_eq( floatx80, floatx80 ); char floatx80_le( floatx80, floatx80 ); char floatx80_lt( floatx80, floatx80 ); diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index b801cd66b6ea..9b367a65cb4d 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -770,6 +770,9 @@ vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn, if ((s64)m_sig < 0) { vdd->sign = vfp_sign_negate(vdd->sign); m_sig = -m_sig; + } else if (m_sig == 0) { + vdd->sign = (fpscr & FPSCR_RMODE_MASK) == + FPSCR_ROUND_MINUSINF ? 0x8000 : 0; } } else { m_sig += vdn->significand; diff --git a/drivers/char/watchdog/sa1100_wdt.c b/drivers/char/watchdog/sa1100_wdt.c index 1b2132617dc3..fb88b4041dca 100644 --- a/drivers/char/watchdog/sa1100_wdt.c +++ b/drivers/char/watchdog/sa1100_wdt.c @@ -36,13 +36,10 @@ #include #define OSCR_FREQ CLOCK_TICK_RATE -#define SA1100_CLOSE_MAGIC (0x5afc4453) static unsigned long sa1100wdt_users; -static int expect_close; static int pre_margin; static int boot_status; -static int nowayout = WATCHDOG_NOWAYOUT; /* * Allow only one person to hold it open @@ -62,55 +59,33 @@ static int sa1100dog_open(struct inode *inode, struct file *file) } /* - * Shut off the timer. - * Lock it in if it's a module and we defined ...NOWAYOUT - * Oddly, the watchdog can only be enabled, but we can turn off - * the interrupt, which appears to prevent the watchdog timing out. + * The watchdog cannot be disabled. + * + * Previous comments suggested that turning off the interrupt by + * clearing OIER[E3] would prevent the watchdog timing out but this + * does not appear to be true (at least on the PXA255). */ static int sa1100dog_release(struct inode *inode, struct file *file) { - OSMR3 = OSCR + pre_margin; - - if (expect_close == SA1100_CLOSE_MAGIC) { - OIER &= ~OIER_E3; - } else { - printk(KERN_CRIT "WATCHDOG: WDT device closed unexpectedly. WDT will not stop!\n"); - } + printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n"); clear_bit(1, &sa1100wdt_users); - expect_close = 0; return 0; } static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos) { - if (len) { - if (!nowayout) { - size_t i; - - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = SA1100_CLOSE_MAGIC; - } - } + if (len) /* Refresh OSMR3 timer. */ OSMR3 = OSCR + pre_margin; - } return len; } static struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, - .identity = "SA1100 Watchdog", + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "SA1100/PXA255 Watchdog", }; static int sa1100dog_ioctl(struct inode *inode, struct file *file, @@ -172,7 +147,7 @@ static struct file_operations sa1100dog_fops = static struct miscdevice sa1100dog_miscdev = { .minor = WATCHDOG_MINOR, - .name = "SA1100/PXA2xx watchdog", + .name = "watchdog", .fops = &sa1100dog_fops, }; @@ -194,7 +169,6 @@ static int __init sa1100dog_init(void) if (ret == 0) printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", margin); - return ret; } @@ -212,8 +186,5 @@ MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog"); module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); - MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);