sh: fix build warning in board-sh7757lcr

This patch fixed the following build warnings:

  CC      arch/sh/boards/board-sh7757lcr.o
arch/sh/boards/board-sh7757lcr.c:77: warning: initialization from incompatible pointer type
arch/sh/boards/board-sh7757lcr.c:106: warning: initialization from incompatible pointer type
arch/sh/boards/board-sh7757lcr.c:151: warning: initialization from incompatible pointer type
arch/sh/boards/board-sh7757lcr.c:181: warning: initialization from incompatible pointer type
arch/sh/boards/board-sh7757lcr.c:213: warning: missing braces around initializer
arch/sh/boards/board-sh7757lcr.c:213: warning: (near initialization for ‘sh7757lcr_mmcif_dma.chan_priv_tx’)

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Yoshihiro Shimoda 2011-11-18 16:32:34 +09:00 committed by Paul Mundt
parent a9098b3726
commit 19d7ca2998

View file

@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = {
#define GBECONT 0xffc10100
#define GBECONT_RMII1 BIT(17)
#define GBECONT_RMII0 BIT(16)
static void sh7757_eth_set_mdio_gate(unsigned long addr)
static void sh7757_eth_set_mdio_gate(void *addr)
{
if ((addr & 0x00000fff) < 0x0800)
if (((unsigned long)addr & 0x00000fff) < 0x0800)
writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
else
writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = {
},
};
static void sh7757_eth_giga_set_mdio_gate(unsigned long addr)
static void sh7757_eth_giga_set_mdio_gate(void *addr)
{
if ((addr & 0x00000fff) < 0x0800) {
if (((unsigned long)addr & 0x00000fff) < 0x0800) {
gpio_set_value(GPIO_PTT4, 1);
writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
} else {
@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = {
};
static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
.chan_priv_tx = SHDMA_SLAVE_MMCIF_TX,
.chan_priv_rx = SHDMA_SLAVE_MMCIF_RX,
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
}
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {