From 19dc74b7c5f02ada19840a85582f42f4dddcdb3e Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 31 Jul 2007 23:06:50 -0300 Subject: [PATCH] V4L/DVB (5975): cx88: Wrong values used for HD-3000 radio mode After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-cards.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 6a136ddbccf8..1fc71a78b926 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -575,35 +575,34 @@ struct cx88_board cx88_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + /* GPIO[2] = audio source for analog audio out connector + * 0 = analog audio input connector + * 1 = CX88 audio DACs + * + * GPIO[7] = input to CX88's audio/chroma ADC + * 0 = FM 10.7 MHz IF + * 1 = Sound 4.5 MHz IF + * + * GPIO[1,5,6] = Oren 51132 pins 27,35,28 respectively + * + * GPIO[16] = Remote control input + */ .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00008484, - .gpio1 = 0x00000000, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x00008400, - .gpio1 = 0x00000000, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x00008400, - .gpio1 = 0x00000000, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, }}, .radio = { .type = CX88_RADIO, - .vmux = 2, - .gpio0 = 0x00008400, - .gpio1 = 0x00000000, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, + .gpio0 = 0x00008404, }, .mpeg = CX88_MPEG_DVB, },