wireless/orinoco: remove changelog, bump version
This commit is contained in:
parent
98c4cae1da
commit
1a9fe638eb
|
@ -46,382 +46,9 @@
|
|||
* under either the MPL or the GPL. */
|
||||
|
||||
/*
|
||||
* v0.01 -> v0.02 - 21/3/2001 - Jean II
|
||||
* o Allow to use regular ethX device name instead of dldwdX
|
||||
* o Warning on IBSS with ESSID=any for firmware 6.06
|
||||
* o Put proper range.throughput values (optimistic)
|
||||
* o IWSPY support (IOCTL and stat gather in Rx path)
|
||||
* o Allow setting frequency in Ad-Hoc mode
|
||||
* o Disable WEP setting if !has_wep to work on old firmware
|
||||
* o Fix txpower range
|
||||
* o Start adding support for Samsung/Compaq firmware
|
||||
*
|
||||
* v0.02 -> v0.03 - 23/3/2001 - Jean II
|
||||
* o Start adding Symbol support - need to check all that
|
||||
* o Fix Prism2/Symbol WEP to accept 128 bits keys
|
||||
* o Add Symbol WEP (add authentication type)
|
||||
* o Add Prism2/Symbol rate
|
||||
* o Add PM timeout (holdover duration)
|
||||
* o Enable "iwconfig eth0 key off" and friends (toggle flags)
|
||||
* o Enable "iwconfig eth0 power unicast/all" (toggle flags)
|
||||
* o Try with an Intel card. It report firmware 1.01, behave like
|
||||
* an antiquated firmware, however on windows it says 2.00. Yuck !
|
||||
* o Workaround firmware bug in allocate buffer (Intel 1.01)
|
||||
* o Finish external renaming to orinoco...
|
||||
* o Testing with various Wavelan firmwares
|
||||
*
|
||||
* v0.03 -> v0.04 - 30/3/2001 - Jean II
|
||||
* o Update to Wireless 11 -> add retry limit/lifetime support
|
||||
* o Tested with a D-Link DWL 650 card, fill in firmware support
|
||||
* o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
|
||||
* o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
|
||||
* It works on D-Link *only* after a tcpdump. Weird...
|
||||
* And still doesn't work on Intel card. Grrrr...
|
||||
* o Update the mode after a setport3
|
||||
* o Add preamble setting for Symbol cards (not yet enabled)
|
||||
* o Don't complain as much about Symbol cards...
|
||||
*
|
||||
* v0.04 -> v0.04b - 22/4/2001 - David Gibson
|
||||
* o Removed the 'eth' parameter - always use ethXX as the
|
||||
* interface name instead of dldwdXX. The other was racy
|
||||
* anyway.
|
||||
* o Clean up RID definitions in hermes.h, other cleanups
|
||||
*
|
||||
* v0.04b -> v0.04c - 24/4/2001 - Jean II
|
||||
* o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
|
||||
* with vendor 02 and firmware 0.08. Added in the capabilities...
|
||||
* o Tested Lucent firmware 7.28, everything works...
|
||||
*
|
||||
* v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
|
||||
* o Spin-off Pcmcia code. This file is renamed orinoco.c,
|
||||
* and orinoco_cs.c now contains only the Pcmcia specific stuff
|
||||
* o Add Airport driver support on top of orinoco.c (see airport.c)
|
||||
*
|
||||
* v0.05 -> v0.05a - 4/5/2001 - Jean II
|
||||
* o Revert to old Pcmcia code to fix breakage of Ben's changes...
|
||||
*
|
||||
* v0.05a -> v0.05b - 4/5/2001 - Jean II
|
||||
* o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
|
||||
* o D-Link firmware doesn't support multicast. We just print a few
|
||||
* error messages, but otherwise everything works...
|
||||
* o For David : set/getport3 works fine, just upgrade iwpriv...
|
||||
*
|
||||
* v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
|
||||
* o Adapt airport.c to latest changes in orinoco.c
|
||||
* o Remove deferred power enabling code
|
||||
*
|
||||
* v0.05c -> v0.05d - 5/5/2001 - Jean II
|
||||
* o Workaround to SNAP decapsulate frame from Linksys AP
|
||||
* original patch from : Dong Liu <dliu AT research.bell-labs.com>
|
||||
* (note : the memcmp bug was mine - fixed)
|
||||
* o Remove set_retry stuff, no firmware support it (bloat--).
|
||||
*
|
||||
* v0.05d -> v0.06 - 25/5/2001 - Jean II
|
||||
* Original patch from "Hong Lin" <alin AT redhat.com>,
|
||||
* "Ian Kinner" <ikinner AT redhat.com>
|
||||
* and "David Smith" <dsmith AT redhat.com>
|
||||
* o Init of priv->tx_rate_ctrl in firmware specific section.
|
||||
* o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
|
||||
* o Spectrum card always need cor_reset (for every reset)
|
||||
* o Fix cor_reset to not lose bit 7 in the register
|
||||
* o flush_stale_links to remove zombie Pcmcia instances
|
||||
* o Ack previous hermes event before reset
|
||||
* Me (with my little hands)
|
||||
* o Allow orinoco.c to call cor_reset via priv->card_reset_handler
|
||||
* o Add priv->need_card_reset to toggle this feature
|
||||
* o Fix various buglets when setting WEP in Symbol firmware
|
||||
* Now, encryption is fully functional on Symbol cards. Youpi !
|
||||
*
|
||||
* v0.06 -> v0.06b - 25/5/2001 - Jean II
|
||||
* o IBSS on Symbol use port_mode = 4. Please don't ask...
|
||||
*
|
||||
* v0.06b -> v0.06c - 29/5/2001 - Jean II
|
||||
* o Show first spy address in /proc/net/wireless for IBSS mode as well
|
||||
*
|
||||
* v0.06c -> v0.06d - 6/7/2001 - David Gibson
|
||||
* o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
|
||||
* wishes to reduce the number of unnecessary messages.
|
||||
* o Removed bogus message on CRC error.
|
||||
* o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
|
||||
* <willwaghorn AT yahoo.co.uk>
|
||||
* o Slight cleanup/re-arrangement of firmware detection code.
|
||||
*
|
||||
* v0.06d -> v0.06e - 1/8/2001 - David Gibson
|
||||
* o Removed some redundant global initializers (orinoco_cs.c).
|
||||
* o Added some module metadata
|
||||
*
|
||||
* v0.06e -> v0.06f - 14/8/2001 - David Gibson
|
||||
* o Wording fix to license
|
||||
* o Added a 'use_alternate_encaps' module parameter for APs which need an
|
||||
* oui of 00:00:00. We really need a better way of handling this, but
|
||||
* the module flag is better than nothing for now.
|
||||
*
|
||||
* v0.06f -> v0.07 - 20/8/2001 - David Gibson
|
||||
* o Removed BAP error retries from hermes_bap_seek(). For Tx we now
|
||||
* let the upper layers handle the retry, we retry explicitly in the
|
||||
* Rx path, but don't make as much noise about it.
|
||||
* o Firmware detection cleanups.
|
||||
*
|
||||
* v0.07 -> v0.07a - 1/10/3001 - Jean II
|
||||
* o Add code to read Symbol firmware revision, inspired by latest code
|
||||
* in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
|
||||
* o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
|
||||
* a 3Com card with a recent firmware, fill out Symbol firmware
|
||||
* capabilities of latest rev (2.20), as well as older Symbol cards.
|
||||
* o Disable Power Management in newer Symbol firmware, the API
|
||||
* has changed (documentation needed).
|
||||
*
|
||||
* v0.07a -> v0.08 - 3/10/2001 - David Gibson
|
||||
* o Fixed a possible buffer overrun found by the Stanford checker (in
|
||||
* dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not
|
||||
* a big problem.
|
||||
* o Turned has_big_wep on for Intersil cards. That's not true for all of
|
||||
* them but we should at least let the capable ones try.
|
||||
* o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
|
||||
* realized that my assumption that the driver's serialization
|
||||
* would prevent the BAP being busy on entry was possibly false, because
|
||||
* things other than seeks may make the BAP busy.
|
||||
* o Use "alternate" (oui 00:00:00) encapsulation by default.
|
||||
* Setting use_old_encaps will mimic the old behaviour, but I think we
|
||||
* will be able to eliminate this.
|
||||
* o Don't try to make __initdata const (the version string). This can't
|
||||
* work because of the way the __initdata sectioning works.
|
||||
* o Added MODULE_LICENSE tags.
|
||||
* o Support for PLX (transparent PCMCIA->PCI bridge) cards.
|
||||
* o Changed to using the new type-fascist min/max.
|
||||
*
|
||||
* v0.08 -> v0.08a - 9/10/2001 - David Gibson
|
||||
* o Inserted some missing acknowledgements/info into the Changelog.
|
||||
* o Fixed some bugs in the normalization of signal level reporting.
|
||||
* o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
|
||||
* which led to an instant crash on big-endian machines.
|
||||
*
|
||||
* v0.08a -> v0.08b - 20/11/2001 - David Gibson
|
||||
* o Lots of cleanup and bugfixes in orinoco_plx.c
|
||||
* o Cleanup to handling of Tx rate setting.
|
||||
* o Removed support for old encapsulation method.
|
||||
* o Removed old "dldwd" names.
|
||||
* o Split RID constants into a new file hermes_rid.h
|
||||
* o Renamed RID constants to match linux-wlan-ng and prism2.o
|
||||
* o Bugfixes in hermes.c
|
||||
* o Poke the PLX's INTCSR register, so it actually starts
|
||||
* generating interrupts. These cards might actually work now.
|
||||
* o Update to wireless extensions v12 (Jean II)
|
||||
* o Support for tallies and inquire command (Jean II)
|
||||
* o Airport updates for newer PPC kernels (BenH)
|
||||
*
|
||||
* v0.08b -> v0.09 - 21/12/2001 - David Gibson
|
||||
* o Some new PCI IDs for PLX cards.
|
||||
* o Removed broken attempt to do ALLMULTI reception. Just use
|
||||
* promiscuous mode instead
|
||||
* o Preliminary work for list-AP (Jean II)
|
||||
* o Airport updates from (BenH)
|
||||
* o Eliminated racy hw_ready stuff
|
||||
* o Fixed generation of fake events in irq handler. This should
|
||||
* finally kill the EIO problems (Jean II & dgibson)
|
||||
* o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
|
||||
*
|
||||
* v0.09 -> v0.09a - 2/1/2002 - David Gibson
|
||||
* o Fixed stupid mistake in multicast list handling, triggering
|
||||
* a BUG()
|
||||
*
|
||||
* v0.09a -> v0.09b - 16/1/2002 - David Gibson
|
||||
* o Fixed even stupider mistake in new interrupt handling, which
|
||||
* seriously broke things on big-endian machines.
|
||||
* o Removed a bunch of redundant includes and exports.
|
||||
* o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
|
||||
* o Don't attempt to do hardware level multicast reception on
|
||||
* Intersil firmware, just go promisc instead.
|
||||
* o Typo fixed in hermes_issue_cmd()
|
||||
* o Eliminated WIRELESS_SPY #ifdefs
|
||||
* o Status code reported on Tx exceptions
|
||||
* o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
|
||||
* interrupts, which should fix the timeouts we're seeing.
|
||||
*
|
||||
* v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
|
||||
* o Removed nested structures used for header parsing, so the
|
||||
* driver should now work without hackery on ARM
|
||||
* o Fix for WEP handling on Intersil (Hawk Newton)
|
||||
* o Eliminated the /proc/hermes/ethXX/regs debugging file. It
|
||||
* was never very useful.
|
||||
* o Make Rx errors less noisy.
|
||||
*
|
||||
* v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
|
||||
* o Laid the groundwork in hermes.[ch] for devices which map
|
||||
* into PCI memory space rather than IO space.
|
||||
* o Fixed bug in multicast handling (cleared multicast list when
|
||||
* leaving promiscuous mode).
|
||||
* o Relegated Tx error messages to debug.
|
||||
* o Cleaned up / corrected handling of allocation lengths.
|
||||
* o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
|
||||
* o Change to using alloc_etherdev() for structure allocations.
|
||||
* o Check for and drop undersized packets.
|
||||
* o Fixed a race in stopping/waking the queue. This should fix
|
||||
* the timeout problems (Pavel Roskin)
|
||||
* o Reverted to netif_wake_queue() on the ALLOC event.
|
||||
* o Fixes for recent Symbol firmwares which lack AP density
|
||||
* (Pavel Roskin).
|
||||
*
|
||||
* v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
|
||||
* o Handle different register spacing, necessary for Prism 2.5
|
||||
* PCI adaptors (Steve Hill).
|
||||
* o Cleaned up initialization of card structures in orinoco_cs
|
||||
* and airport. Removed card->priv field.
|
||||
* o Make response structure optional for hermes_docmd_wait()
|
||||
* Pavel Roskin)
|
||||
* o Added PCI id for Nortel emobility to orinoco_plx.c.
|
||||
* o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
|
||||
* o Cleanups to firmware capability detection.
|
||||
* o Arrange for orinoco_pci.c to override firmware detection.
|
||||
* We should be able to support the PCI Intersil cards now.
|
||||
* o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
|
||||
* o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
|
||||
* Malinen).
|
||||
* o Makefile changes for better integration into David Hinds
|
||||
* pcmcia-cs package.
|
||||
*
|
||||
* v0.11a -> v0.11b - 1 May 2002 - David Gibson
|
||||
* o Better error reporting in orinoco_plx_init_one()
|
||||
* o Fixed multiple bad kfree() bugs introduced by the
|
||||
* alloc_orinocodev() changes.
|
||||
*
|
||||
* v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
|
||||
* o Support changing the MAC address.
|
||||
* o Correct display of Intersil firmware revision numbers.
|
||||
* o Entirely revised locking scheme. Should be both simpler and
|
||||
* better.
|
||||
* o Merged some common code in orinoco_plx, orinoco_pci and
|
||||
* airport by creating orinoco_default_{open,stop,reset}()
|
||||
* which are used as the dev->open, dev->stop, priv->reset
|
||||
* callbacks if none are specified when alloc_orinocodev() is
|
||||
* called.
|
||||
* o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
|
||||
* They didn't do anything.
|
||||
*
|
||||
* v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
|
||||
* o Some rearrangement of code.
|
||||
* o Numerous fixups to locking and rest handling, particularly
|
||||
* for PCMCIA.
|
||||
* o This allows open and stop net_device methods to be in
|
||||
* orinoco.c now, rather than in the init modules.
|
||||
* o In orinoco_cs.c link->priv now points to the struct
|
||||
* net_device not to the struct orinoco_private.
|
||||
* o Added a check for undersized SNAP frames, which could cause
|
||||
* crashes.
|
||||
*
|
||||
* v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
|
||||
* o Fix hw->num_init testing code, so num_init is actually
|
||||
* incremented.
|
||||
* o Fix very stupid bug in orinoco_cs which broke compile with
|
||||
* CONFIG_SMP.
|
||||
* o Squashed a warning.
|
||||
*
|
||||
* v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
|
||||
* o Change to C9X style designated initializers.
|
||||
* o Add support for 3Com AirConnect PCI.
|
||||
* o No longer ignore the hard_reset argument to
|
||||
* alloc_orinocodev(). Oops.
|
||||
*
|
||||
* v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
|
||||
* o Revert the broken 0.12* locking scheme and go to a new yet
|
||||
* simpler scheme.
|
||||
* o Do firmware resets only in orinoco_init() and when waking
|
||||
* the card from hard sleep.
|
||||
*
|
||||
* v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
|
||||
* o Re-introduced full resets (via schedule_task()) on Tx
|
||||
* timeout.
|
||||
*
|
||||
* v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
|
||||
* o Minor cleanups to info frame handling. Add basic support
|
||||
* for linkstatus info frames.
|
||||
* o Include required kernel headers in orinoco.h, to avoid
|
||||
* compile problems.
|
||||
*
|
||||
* v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
|
||||
* o Implemented hard reset for Airport cards
|
||||
* o Experimental suspend/resume implementation for orinoco_pci
|
||||
* o Abolished /proc debugging support, replaced with a debugging
|
||||
* iwpriv. Now it's ugly and simple instead of ugly and complex.
|
||||
* o Bugfix in hermes.c if the firmware returned a record length
|
||||
* of 0, we could go clobbering memory.
|
||||
* o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
|
||||
* was set, which was usually true on PCMCIA hot removes.
|
||||
* o Track LINKSTATUS messages, silently drop Tx packets before
|
||||
* we are connected (avoids confusing the firmware), and only
|
||||
* give LINKSTATUS printk()s if the status has changed.
|
||||
*
|
||||
* v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
|
||||
* o Cleanup: use dev instead of priv in various places.
|
||||
* o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
|
||||
* if we're in the middle of a (driver initiated) hard reset.
|
||||
* o Bug fix: ETH_ZLEN is supposed to include the header
|
||||
* (Dionysus Blazakis & Manish Karir)
|
||||
* o Convert to using workqueues instead of taskqueues (and
|
||||
* backwards compatibility macros for pre 2.5.41 kernels).
|
||||
* o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
|
||||
* airport.c
|
||||
* o New orinoco_tmd.c init module from Joerg Dorchain for
|
||||
* TMD7160 based PCI to PCMCIA bridges (similar to
|
||||
* orinoco_plx.c).
|
||||
*
|
||||
* v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
|
||||
* o Make hw_unavailable a counter, rather than just a flag, this
|
||||
* is necessary to avoid some races (such as a card being
|
||||
* removed in the middle of orinoco_reset().
|
||||
* o Restore Release/RequestConfiguration in the PCMCIA event handler
|
||||
* when dealing with a driver initiated hard reset. This is
|
||||
* necessary to prevent hangs due to a spurious interrupt while
|
||||
* the reset is in progress.
|
||||
* o Clear the 802.11 header when transmitting, even though we
|
||||
* don't use it. This fixes a long standing bug on some
|
||||
* firmwares, which seem to get confused if that isn't done.
|
||||
* o Be less eager to de-encapsulate SNAP frames, only do so if
|
||||
* the OUI is 00:00:00 or 00:00:f8, leave others alone. The old
|
||||
* behaviour broke CDP (Cisco Discovery Protocol).
|
||||
* o Use dev instead of priv for free_irq() as well as
|
||||
* request_irq() (oops).
|
||||
* o Attempt to reset rather than giving up if we get too many
|
||||
* IRQs.
|
||||
* o Changed semantics of __orinoco_down() so it can be called
|
||||
* safely with hw_unavailable set. It also now clears the
|
||||
* linkstatus (since we're going to have to reassociate).
|
||||
*
|
||||
* v0.13d -> v0.13e - 12 May 2003 - David Gibson
|
||||
* o Support for post-2.5.68 return values from irq handler.
|
||||
* o Fixed bug where underlength packets would be double counted
|
||||
* in the rx_dropped statistics.
|
||||
* o Provided a module parameter to suppress linkstatus messages.
|
||||
*
|
||||
* v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
|
||||
* o Replaced priv->connected logic with netif_carrier_on/off()
|
||||
* calls.
|
||||
* o Remove has_ibss_any and never set the CREATEIBSS RID when
|
||||
* the ESSID is empty. Too many firmwares break if we do.
|
||||
* o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
|
||||
* __devinitdata from PCI ID tables, use free_netdev().
|
||||
* o Enabled shared-key authentication for Agere firmware (from
|
||||
* Robert J. Moore <Robert.J.Moore AT allanbank.com>
|
||||
* o Move netif_wake_queue() (back) to the Tx completion from the
|
||||
* ALLOC event. This seems to prevent/mitigate the rolling
|
||||
* error -110 problems at least on some Intersil firmwares.
|
||||
* Theoretically reduces performance, but I can't measure it.
|
||||
* Patch from Andrew Tridgell <tridge AT samba.org>
|
||||
*
|
||||
* v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
|
||||
* o Correctly turn off shared-key authentication when requested
|
||||
* (bugfix from Robert J. Moore).
|
||||
* o Correct airport sleep interfaces for current 2.6 kernels.
|
||||
* o Add code for key change without disabling/enabling the MAC
|
||||
* port. This is supposed to allow 802.1x to work sanely, but
|
||||
* doesn't seem to yet.
|
||||
*
|
||||
* TODO
|
||||
* o New wireless extensions API (patch from Moustafa
|
||||
* Youssef, updated by Jim Carter and Pavel Roskin).
|
||||
* o Handle de-encapsulation within network layer, provide 802.11
|
||||
* headers (patch from Thomas 'Dent' Mirlacher)
|
||||
* o RF monitor mode support
|
||||
* o Fix possible races in SPY handling.
|
||||
* o Disconnect wireless extensions from fundamental configuration.
|
||||
* o (maybe) Software WEP support (patch from Stano Meduna).
|
||||
|
|
|
@ -7,7 +7,7 @@
|
|||
#ifndef _ORINOCO_H
|
||||
#define _ORINOCO_H
|
||||
|
||||
#define DRIVER_VERSION "0.14alpha2"
|
||||
#define DRIVER_VERSION "0.15rc2"
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
|
Loading…
Reference in a new issue