usb: musb: clean up commit 'workaround Blackfin FIFO anomalies'

The version applied had a few comments which are now
done.

Thanks to Sergei for pointing out.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Bryan Wu 2009-12-28 13:40:39 +02:00 committed by Greg Kroah-Hartman
parent 565969237a
commit 1ca9e9ca31

View file

@ -30,7 +30,6 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
void __iomem *fifo = hw_ep->fifo;
void __iomem *epio = hw_ep->regs;
u8 epnum = hw_ep->epnum;
u16 dma_reg = 0;
prefetch((u8 *)src);
@ -42,15 +41,17 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
dump_fifo_data(src, len);
if (!ANOMALY_05000380 && epnum != 0) {
flush_dcache_range((unsigned int)src,
(unsigned int)(src + len));
u16 dma_reg;
flush_dcache_range((unsigned long)src,
(unsigned long)(src + len));
/* Setup DMA address register */
dma_reg = (u16) ((u32) src & 0xFFFF);
dma_reg = (u32)src;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
SSYNC();
dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
dma_reg = (u32)src >> 16;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
SSYNC();
@ -79,12 +80,9 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
SSYNC();
if (unlikely((unsigned long)src & 0x01))
outsw_8((unsigned long)fifo, src,
len & 0x01 ? (len >> 1) + 1 : len >> 1);
outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
else
outsw((unsigned long)fifo, src,
len & 0x01 ? (len >> 1) + 1 : len >> 1);
outsw((unsigned long)fifo, src, (len + 1) >> 1);
}
}
/*
@ -94,19 +92,19 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
void __iomem *fifo = hw_ep->fifo;
u8 epnum = hw_ep->epnum;
u16 dma_reg = 0;
if (ANOMALY_05000467 && epnum != 0) {
u16 dma_reg;
invalidate_dcache_range((unsigned int)dst,
(unsigned int)(dst + len));
invalidate_dcache_range((unsigned long)dst,
(unsigned long)(dst + len));
/* Setup DMA address register */
dma_reg = (u16) ((u32) dst & 0xFFFF);
dma_reg = (u32)dst;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
SSYNC();
dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
dma_reg = (u32)dst >> 16;
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
SSYNC();