iio: Add LTC2471/LTC2473 driver
The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473 is similar to the LTC2471 but outputs a signed differential value. Datasheet: http://cds.linear.com/docs/en/datasheet/24713fb.pdf Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>zero-colors
Mike Looijmans
Jonathan Cameron
parent
e12ffd241c
commit
1d3eacbfa6
|
|
@ -362,6 +362,16 @@ config LPC32XX_ADC
|
|||
activate only one via device tree selection. Provides direct access
|
||||
via sysfs.
|
||||
|
||||
config LTC2471
|
||||
tristate "Linear Technology LTC2471 and LTC2473 ADC driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to build support for Linear Technology LTC2471 and
|
||||
LTC2473 16-bit I2C ADC.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ltc2471.
|
||||
|
||||
config LTC2485
|
||||
tristate "Linear Technology LTC2485 ADC driver"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -34,6 +34,7 @@ obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
|
|||
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
|
||||
obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
|
||||
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
|
||||
obj-$(CONFIG_LTC2471) += ltc2471.o
|
||||
obj-$(CONFIG_LTC2485) += ltc2485.o
|
||||
obj-$(CONFIG_LTC2497) += ltc2497.o
|
||||
obj-$(CONFIG_MAX1027) += max1027.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,160 @@
|
|||
/*
|
||||
* Driver for Linear Technology LTC2471 and LTC2473 voltage monitors
|
||||
* The LTC2473 is identical to the 2471, but reports a differential signal.
|
||||
*
|
||||
* Copyright (C) 2017 Topic Embedded Products
|
||||
* Author: Mike Looijmans <mike.looijmans@topic.nl>
|
||||
*
|
||||
* License: GPLv2
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
enum ltc2471_chips {
|
||||
ltc2471,
|
||||
ltc2473,
|
||||
};
|
||||
|
||||
struct ltc2471_data {
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
/* Reference voltage is 1.25V */
|
||||
#define LTC2471_VREF 1250
|
||||
|
||||
/* Read two bytes from the I2C bus to obtain the ADC result */
|
||||
static int ltc2471_get_value(struct i2c_client *client)
|
||||
{
|
||||
int ret;
|
||||
__be16 buf;
|
||||
|
||||
ret = i2c_master_recv(client, (char *)&buf, sizeof(buf));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (ret != sizeof(buf))
|
||||
return -EIO;
|
||||
|
||||
/* MSB first */
|
||||
return be16_to_cpu(buf);
|
||||
}
|
||||
|
||||
static int ltc2471_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long info)
|
||||
{
|
||||
struct ltc2471_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
switch (info) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
ret = ltc2471_get_value(data->client);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = ret;
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
if (chan->differential)
|
||||
/* Output ranges from -VREF to +VREF */
|
||||
*val = 2 * LTC2471_VREF;
|
||||
else
|
||||
/* Output ranges from 0 to VREF */
|
||||
*val = LTC2471_VREF;
|
||||
*val2 = 16; /* 16 data bits */
|
||||
return IIO_VAL_FRACTIONAL_LOG2;
|
||||
|
||||
case IIO_CHAN_INFO_OFFSET:
|
||||
/* Only differential chip has this property */
|
||||
*val = -LTC2471_VREF;
|
||||
return IIO_VAL_INT;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec ltc2471_channel[] = {
|
||||
{
|
||||
.type = IIO_VOLTAGE,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
|
||||
},
|
||||
};
|
||||
|
||||
static const struct iio_chan_spec ltc2473_channel[] = {
|
||||
{
|
||||
.type = IIO_VOLTAGE,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
|
||||
BIT(IIO_CHAN_INFO_OFFSET),
|
||||
.differential = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct iio_info ltc2471_info = {
|
||||
.read_raw = ltc2471_read_raw,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int ltc2471_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct ltc2471_data *data;
|
||||
int ret;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->info = <c2471_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
if (id->driver_data == ltc2473)
|
||||
indio_dev->channels = ltc2473_channel;
|
||||
else
|
||||
indio_dev->channels = ltc2471_channel;
|
||||
indio_dev->num_channels = 1;
|
||||
|
||||
/* Trigger once to start conversion and check if chip is there */
|
||||
ret = ltc2471_get_value(client);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Cannot read from device.\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
return devm_iio_device_register(&client->dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ltc2471_i2c_id[] = {
|
||||
{ "ltc2471", ltc2471 },
|
||||
{ "ltc2473", ltc2473 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);
|
||||
|
||||
static struct i2c_driver ltc2471_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "ltc2471",
|
||||
},
|
||||
.probe = ltc2471_i2c_probe,
|
||||
.id_table = ltc2471_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(ltc2471_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("LTC2471/LTC2473 ADC driver");
|
||||
MODULE_AUTHOR("Topic Embedded Products");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue