redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

[PATCH] Documentation/networking/dmfe.txt: Make documentation nicer 

Patch indents dmfe.txt to look like other docs.  It adds a tip about CNET
cards using Davicom chipsets.  Also it removes parts where it refers to how
to build driver out-of-kernel which seems to be cruft from times where the
driver was out of the kernel.

Signed-off-by: Ismail Donmez <ismail@kde.org.tr>
Signed-off-by: Domen Puncer <domen@coderock.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
wifi-calibration
Ismail Donmez 2005-06-20 15:32:52 -07:00 committed by Jeff Garzik
parent 400de2c0c4
commit 1db1a8740a
1 changed files with 50 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
Documentation/networking/dmfe.txt
View File

@ -1,59 +1,65 @@
dmfe.c: Version 1.28 01/18/2000
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
Copyright (C) 1997 Sten Wang
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
A. Compiler command:
This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET
10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you
didn't compile this driver as a module, it will automatically load itself on boot and print a
line similar to :
A-1: For normal single or multiple processor kernel
"gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
-Wstrict-prototypes -O6 -c dmfe.c"
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
A-2: For single or multiple processor with kernel module version function
"gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet
-Wall -Wstrict-prototypes -O6 -c dmfe.c"
If you compiled this driver as a module, you have to load it on boot.You can load it with command :
insmod dmfe
This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass
a mode= setting to module while loading, like :
insmod dmfe mode=0 # Force 10M Half Duplex
insmod dmfe mode=1 # Force 100M Half Duplex
insmod dmfe mode=4 # Force 10M Full Duplex
insmod dmfe mode=5 # Force 100M Full Duplex
Next you should configure your network interface with a command similar to :
ifconfig eth0 172.22.3.18
^^^^^^^^^^^
Your IP Adress
Then you may have to modify the default routing table with command :
route add default eth0
B. The following steps teach you how to activate a DM9102 board:
1. Used the upper compiler command to compile dmfe.c
2. Insert dmfe module into kernel
"insmod dmfe" ;;Auto Detection Mode (Suggest)
"insmod dmfe mode=0" ;;Force 10M Half Duplex
"insmod dmfe mode=1" ;;Force 100M Half Duplex
"insmod dmfe mode=4" ;;Force 10M Full Duplex
"insmod dmfe mode=5" ;;Force 100M Full Duplex
3. Config a dm9102 network interface
"ifconfig eth0 172.22.3.18"
^^^^^^^^^^^ Your IP address
4. Activate the IP routing table. For some distributions, it is not
necessary. You can type "route" to check.
"route add default eth0"
Now your ethernet card should be up and running.
5. Well done. Your DM9102 adapter is now activated.
TODO:
Implement pci_driver::suspend() and pci_driver::resume() power management methods.
Check on 64 bit boxes.
Check and fix on big endian boxes.
Test and make sure PCI latency is now correct for all cases.
C. Object files description:
1. dmfe_rh61.o: For Redhat 6.1
Authors:
If you can make sure your kernel version, you can rename
to dmfe.o and directly use it without re-compiling.
Sten Wang <sten_wang@davicom.com.tw > : Original Author
Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
Contributors:
Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw
Marcelo Tosatti <marcelo@conectiva.com.br>
Alan Cox <alan@redhat.com>
Jeff Garzik <jgarzik@pobox.com>
Vojtech Pavlik <vojtech@suse.cz>