redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

[IA64] remove time interpolator 

Remove time_interpolator code (This is generic code, but
only user was ia64.  It has been superseded by the
CONFIG_GENERIC_TIME code).

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Peter Keilty <peter.keilty@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
wifi-calibration
Bob Picco 2007-07-18 15:51:28 -07:00 committed by Tony Luck
parent 0aa366f351
commit 1f564ad6d4
6 changed files with 0 additions and 391 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
Documentation/time_interpolators.txt
View File

@ -1,41 +0,0 @@
Time Interpolators
------------------
Time interpolators are a base of time calculation between timer ticks and
allow an accurate determination of time down to the accuracy of the time
source in nanoseconds.
The architecture specific code typically provides gettimeofday and
settimeofday under Linux. The time interpolator provides both if an arch
defines CONFIG_TIME_INTERPOLATION. The arch still must set up timer tick
operations and call the necessary functions to advance the clock.
With the time interpolator a standardized interface exists for time
interpolation between ticks. The provided logic is highly scalable
and has been tested in SMP situations of up to 512 CPUs.
If CONFIG_TIME_INTERPOLATION is defined then the architecture specific code
(or the device drivers - like HPET) may register time interpolators.
These are typically defined in the following way:
static struct time_interpolator my_interpolator {
.frequency = MY_FREQUENCY,
.source = TIME_SOURCE_MMIO32,
.shift = 8, /* scaling for higher accuracy */
.drift = -1, /* Unknown drift */
.jitter = 0 /* time source is stable */
};
void time_init(void)
{
....
/* Initialization of the timer *.
my_interpolator.address = &my_timer;
register_time_interpolator(&my_interpolator);
....
}
For more details see include/linux/timex.h and kernel/timer.c.
Christoph Lameter <christoph@lameter.com>, October 31, 2004

60
include/linux/timex.h
View File

@ -224,66 +224,6 @@ static inline int ntp_synced(void)
__x < 0 ? -(-__x >> __s) : __x >> __s; \
})
#ifdef CONFIG_TIME_INTERPOLATION
#define TIME_SOURCE_CPU 0
#define TIME_SOURCE_MMIO64 1
#define TIME_SOURCE_MMIO32 2
#define TIME_SOURCE_FUNCTION 3
/* For proper operations time_interpolator clocks must run slightly slower
* than the standard clock since the interpolator may only correct by having
* time jump forward during a tick. A slower clock is usually a side effect
* of the integer divide of the nanoseconds in a second by the frequency.
* The accuracy of the division can be increased by specifying a shift.
* However, this may cause the clock not to be slow enough.
* The interpolator will self-tune the clock by slowing down if no
* resets occur or speeding up if the time jumps per analysis cycle
* become too high.
*
* Setting jitter compensates for a fluctuating timesource by comparing
* to the last value read from the timesource to insure that an earlier value
* is not returned by a later call. The price to pay
* for the compensation is that the timer routines are not as scalable anymore.
*/
struct time_interpolator {
u16 source; /* time source flags */
u8 shift; /* increases accuracy of multiply by shifting. */
/* Note that bits may be lost if shift is set too high */
u8 jitter; /* if set compensate for fluctuations */
u32 nsec_per_cyc; /* set by register_time_interpolator() */
void *addr; /* address of counter or function */
cycles_t mask; /* mask the valid bits of the counter */
unsigned long offset; /* nsec offset at last update of interpolator */
u64 last_counter; /* counter value in units of the counter at last update */
cycles_t last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
u64 frequency; /* frequency in counts/second */
long drift; /* drift in parts-per-million (or -1) */
unsigned long skips; /* skips forward */
unsigned long ns_skipped; /* nanoseconds skipped */
struct time_interpolator *next;
};
extern void register_time_interpolator(struct time_interpolator *);
extern void unregister_time_interpolator(struct time_interpolator *);
extern void time_interpolator_reset(void);
extern unsigned long time_interpolator_get_offset(void);
extern void time_interpolator_update(long delta_nsec);
#else /* !CONFIG_TIME_INTERPOLATION */
static inline void time_interpolator_reset(void)
{
}
static inline void time_interpolator_update(long delta_nsec)
{
}
#endif /* !CONFIG_TIME_INTERPOLATION */
#define TICK_LENGTH_SHIFT 32
#ifdef CONFIG_NO_HZ

88
kernel/time.c
View File

@ -136,7 +136,6 @@ static inline void warp_clock(void)
write_seqlock_irq(&xtime_lock);
wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60;
xtime.tv_sec += sys_tz.tz_minuteswest * 60;
time_interpolator_reset();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
}
@ -309,92 +308,6 @@ struct timespec timespec_trunc(struct timespec t, unsigned gran)
}
EXPORT_SYMBOL(timespec_trunc);
#ifdef CONFIG_TIME_INTERPOLATION
void getnstimeofday (struct timespec *tv)
{
unsigned long seq,sec,nsec;
do {
seq = read_seqbegin(&xtime_lock);
sec = xtime.tv_sec;
nsec = xtime.tv_nsec+time_interpolator_get_offset();
} while (unlikely(read_seqretry(&xtime_lock, seq)));
while (unlikely(nsec >= NSEC_PER_SEC)) {
nsec -= NSEC_PER_SEC;
++sec;
}
tv->tv_sec = sec;
tv->tv_nsec = nsec;
}
EXPORT_SYMBOL_GPL(getnstimeofday);
int do_settimeofday (struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
{
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
time_esterror = NTP_PHASE_LIMIT;
time_interpolator_reset();
}
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
}
EXPORT_SYMBOL(do_settimeofday);
void do_gettimeofday (struct timeval *tv)
{
unsigned long seq, nsec, usec, sec, offset;
do {
seq = read_seqbegin(&xtime_lock);
offset = time_interpolator_get_offset();
sec = xtime.tv_sec;
nsec = xtime.tv_nsec;
} while (unlikely(read_seqretry(&xtime_lock, seq)));
usec = (nsec + offset) / 1000;
while (unlikely(usec >= USEC_PER_SEC)) {
usec -= USEC_PER_SEC;
++sec;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
/*
* Make sure xtime.tv_sec [returned by sys_time()] always
* follows the gettimeofday() result precisely. This
* condition is extremely unlikely, it can hit at most
* once per second:
*/
if (unlikely(xtime.tv_sec != tv->tv_sec)) {
unsigned long flags;
write_seqlock_irqsave(&xtime_lock, flags);
update_wall_time();
write_sequnlock_irqrestore(&xtime_lock, flags);
}
}
EXPORT_SYMBOL(do_gettimeofday);
#else /* CONFIG_TIME_INTERPOLATION */
#ifndef CONFIG_GENERIC_TIME
/*
* Simulate gettimeofday using do_gettimeofday which only allows a timeval
@ -410,7 +323,6 @@ void getnstimeofday(struct timespec *tv)
}
EXPORT_SYMBOL_GPL(getnstimeofday);
#endif
#endif /* CONFIG_TIME_INTERPOLATION */
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59

10
kernel/time/ntp.c
View File

@ -116,11 +116,6 @@ void second_overflow(void)
if (xtime.tv_sec % 86400 == 0) {
xtime.tv_sec--;
wall_to_monotonic.tv_sec++;
/*
* The timer interpolator will make time change
* gradually instead of an immediate jump by one second
*/
time_interpolator_update(-NSEC_PER_SEC);
time_state = TIME_OOP;
printk(KERN_NOTICE "Clock: inserting leap second "
"23:59:60 UTC\n");
@ -130,11 +125,6 @@ void second_overflow(void)
if ((xtime.tv_sec + 1) % 86400 == 0) {
xtime.tv_sec++;
wall_to_monotonic.tv_sec--;
/*
* Use of time interpolator for a gradual change of
* time
*/
time_interpolator_update(NSEC_PER_SEC);
time_state = TIME_WAIT;
printk(KERN_NOTICE "Clock: deleting leap second "
"23:59:59 UTC\n");

4
kernel/time/timekeeping.c
View File

@ -466,10 +466,6 @@ void update_wall_time(void)
second_overflow();
}
/* interpolator bits */
time_interpolator_update(clock->xtime_interval
>> clock->shift);
/* accumulate error between NTP and clock interval */
clock->error += current_tick_length();
clock->error -= clock->xtime_interval << (TICK_LENGTH_SHIFT - clock->shift);

188
kernel/timer.c
View File

@ -1349,194 +1349,6 @@ void __init init_timers(void)
open_softirq(TIMER_SOFTIRQ, run_timer_softirq, NULL);
}
#ifdef CONFIG_TIME_INTERPOLATION
struct time_interpolator *time_interpolator __read_mostly;
static struct time_interpolator *time_interpolator_list __read_mostly;
static DEFINE_SPINLOCK(time_interpolator_lock);
static inline cycles_t time_interpolator_get_cycles(unsigned int src)
{
unsigned long (*x)(void);
switch (src)
{
case TIME_SOURCE_FUNCTION:
x = time_interpolator->addr;
return x();
case TIME_SOURCE_MMIO64 :
return readq_relaxed((void __iomem *)time_interpolator->addr);
case TIME_SOURCE_MMIO32 :
return readl_relaxed((void __iomem *)time_interpolator->addr);
default: return get_cycles();
}
}
static inline u64 time_interpolator_get_counter(int writelock)
{
unsigned int src = time_interpolator->source;
if (time_interpolator->jitter)
{
cycles_t lcycle;
cycles_t now;
do {
lcycle = time_interpolator->last_cycle;
now = time_interpolator_get_cycles(src);
if (lcycle && time_after(lcycle, now))
return lcycle;
/* When holding the xtime write lock, there's no need
* to add the overhead of the cmpxchg. Readers are
* force to retry until the write lock is released.
*/
if (writelock) {
time_interpolator->last_cycle = now;
return now;
}
/* Keep track of the last timer value returned. The use of cmpxchg here
* will cause contention in an SMP environment.
*/
} while (unlikely(cmpxchg(&time_interpolator->last_cycle, lcycle, now) != lcycle));
return now;
}
else
return time_interpolator_get_cycles(src);
}
void time_interpolator_reset(void)
{
time_interpolator->offset = 0;
time_interpolator->last_counter = time_interpolator_get_counter(1);
}
#define GET_TI_NSECS(count,i) (((((count) - i->last_counter) & (i)->mask) * (i)->nsec_per_cyc) >> (i)->shift)
unsigned long time_interpolator_get_offset(void)
{
/* If we do not have a time interpolator set up then just return zero */
if (!time_interpolator)
return 0;
return time_interpolator->offset +
GET_TI_NSECS(time_interpolator_get_counter(0), time_interpolator);
}
#define INTERPOLATOR_ADJUST 65536
#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
void time_interpolator_update(long delta_nsec)
{
u64 counter;
unsigned long offset;
/* If there is no time interpolator set up then do nothing */
if (!time_interpolator)
return;
/*
* The interpolator compensates for late ticks by accumulating the late
* time in time_interpolator->offset. A tick earlier than expected will
* lead to a reset of the offset and a corresponding jump of the clock
* forward. Again this only works if the interpolator clock is running
* slightly slower than the regular clock and the tuning logic insures
* that.
*/
counter = time_interpolator_get_counter(1);
offset = time_interpolator->offset +
GET_TI_NSECS(counter, time_interpolator);
if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
time_interpolator->offset = offset - delta_nsec;
else {
time_interpolator->skips++;
time_interpolator->ns_skipped += delta_nsec - offset;
time_interpolator->offset = 0;
}
time_interpolator->last_counter = counter;
/* Tuning logic for time interpolator invoked every minute or so.
* Decrease interpolator clock speed if no skips occurred and an offset is carried.
* Increase interpolator clock speed if we skip too much time.
*/
if (jiffies % INTERPOLATOR_ADJUST == 0)
{
if (time_interpolator->skips == 0 && time_interpolator->offset > tick_nsec)
time_interpolator->nsec_per_cyc--;
if (time_interpolator->ns_skipped > INTERPOLATOR_MAX_SKIP && time_interpolator->offset == 0)
time_interpolator->nsec_per_cyc++;
time_interpolator->skips = 0;
time_interpolator->ns_skipped = 0;
}
}
static inline int
is_better_time_interpolator(struct time_interpolator *new)
{
if (!time_interpolator)
return 1;
return new->frequency > 2*time_interpolator->frequency ||
(unsigned long)new->drift < (unsigned long)time_interpolator->drift;
}
void
register_time_interpolator(struct time_interpolator *ti)
{
unsigned long flags;
/* Sanity check */
BUG_ON(ti->frequency == 0 || ti->mask == 0);
ti->nsec_per_cyc = ((u64)NSEC_PER_SEC << ti->shift) / ti->frequency;
spin_lock(&time_interpolator_lock);
write_seqlock_irqsave(&xtime_lock, flags);
if (is_better_time_interpolator(ti)) {
time_interpolator = ti;
time_interpolator_reset();
}
write_sequnlock_irqrestore(&xtime_lock, flags);
ti->next = time_interpolator_list;
time_interpolator_list = ti;
spin_unlock(&time_interpolator_lock);
}
void
unregister_time_interpolator(struct time_interpolator *ti)
{
struct time_interpolator *curr, **prev;
unsigned long flags;
spin_lock(&time_interpolator_lock);
prev = &time_interpolator_list;
for (curr = *prev; curr; curr = curr->next) {
if (curr == ti) {
*prev = curr->next;
break;
}
prev = &curr->next;
}
write_seqlock_irqsave(&xtime_lock, flags);
if (ti == time_interpolator) {
/* we lost the best time-interpolator: */
time_interpolator = NULL;
/* find the next-best interpolator */
for (curr = time_interpolator_list; curr; curr = curr->next)
if (is_better_time_interpolator(curr))
time_interpolator = curr;
time_interpolator_reset();
}
write_sequnlock_irqrestore(&xtime_lock, flags);
spin_unlock(&time_interpolator_lock);
}
#endif /* CONFIG_TIME_INTERPOLATION */
/**
* msleep - sleep safely even with waitqueue interruptions
* @msecs: Time in milliseconds to sleep for