[PATCH] ppc32: Reorganize and complete MPC52xx initial cpu setup

ppc32: Reorganize and complete MPC52xx initial cpu setup

This patch splits up the CPU setup into a generic part and a
platform specific part. We also add a few missing init at the
same time.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Sylvain Munaut 2006-03-26 13:38:09 +02:00 committed by Paul Mackerras
parent f8dd311982
commit 1f5e3b028c
3 changed files with 62 additions and 28 deletions

View file

@ -36,8 +36,6 @@
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <syslib/mpc52xx_pci.h>
extern int powersave_nap;
@ -99,34 +97,23 @@ lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
static void __init
lite5200_setup_cpu(void)
{
struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
struct mpc52xx_xlb __iomem *xlb;
u32 port_config;
u32 intr_ctrl;
/* Map zones */
cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
if (!cdm || !gpio || !xlb || !intr) {
printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
"lite5200_setup_cpu\n");
if (!gpio || !intr) {
printk(KERN_ERR __FILE__ ": "
"Error while mapping GPIO/INTR during "
"lite5200_setup_cpu\n");
goto unmap_regs;
}
/* Use internal 48 Mhz */
out_8(&cdm->ext_48mhz_en, 0x00);
out_8(&cdm->fd_enable, 0x01);
if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
out_be16(&cdm->fd_counters, 0x0001);
else
out_be16(&cdm->fd_counters, 0x5555);
/* Get port mux config */
port_config = in_be32(&gpio->port_config);
@ -137,17 +124,13 @@ lite5200_setup_cpu(void)
port_config &= ~0x00007000; /* Differential mode - USB1 only */
port_config |= 0x00001000;
/* ATA CS is on csb_4/5 */
port_config &= ~0x03000000;
port_config |= 0x01000000;
/* Commit port config */
out_be32(&gpio->port_config, port_config);
/* Configure the XLB Arbiter */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
/* Enable ram snooping for 1GB window */
out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
/* IRQ[0-3] setup */
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= ~0x00ff0000;
@ -163,9 +146,7 @@ lite5200_setup_cpu(void)
/* Unmap reg zone */
unmap_regs:
if (cdm) iounmap(cdm);
if (gpio) iounmap(gpio);
if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
@ -173,7 +154,8 @@ static void __init
lite5200_setup_arch(void)
{
/* CPU & Port mux setup */
lite5200_setup_cpu();
mpc52xx_setup_cpu(); /* Generic */
lite5200_setup_cpu(); /* Platform specific */
#ifdef CONFIG_PCI
/* PCI Bridge setup */

View file

@ -24,6 +24,8 @@
#include <asm/pgtable.h>
#include <asm/ppcboot.h>
#include <syslib/mpc52xx_pci.h>
extern bd_t __res;
static int core_mult[] = { /* CPU Frequency multiplier, taken */
@ -216,6 +218,52 @@ mpc52xx_calibrate_decr(void)
tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
}
void __init
mpc52xx_setup_cpu(void)
{
struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_xlb __iomem *xlb;
/* Map zones */
cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
if (!cdm || !xlb) {
printk(KERN_ERR __FILE__ ": "
"Error while mapping CDM/XLB during "
"mpc52xx_setup_cpu\n");
goto unmap_regs;
}
/* Use internal 48 Mhz */
out_8(&cdm->ext_48mhz_en, 0x00);
out_8(&cdm->fd_enable, 0x01);
if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
out_be16(&cdm->fd_counters, 0x0001);
else
out_be16(&cdm->fd_counters, 0x5555);
/* Configure the XLB Arbiter priorities */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
/* Enable ram snooping for 1GB window */
out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
/* Disable XLB pipelining */
/* (cfr errate 292. We could do this only just before ATA PIO
transaction and re-enable it after ...) */
out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
/* Unmap reg zone */
unmap_regs:
if (cdm) iounmap(cdm);
if (xlb) iounmap(xlb);
}
int mpc52xx_match_psc_function(int psc_idx, const char *func)
{
struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;

View file

@ -355,6 +355,7 @@ struct mpc52xx_xlb {
u32 snoop_window; /* XLB + 0x70 */
};
#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
/* Clock Distribution control */
@ -427,6 +428,9 @@ extern void mpc52xx_calibrate_decr(void);
extern void mpc52xx_find_bridges(void);
extern void mpc52xx_setup_cpu(void);
/* Matching of PSC function */
struct mpc52xx_psc_func {