ARM: tegra: device tree changes for 3.12
This branch contains all *.dts (device tree) changes for Tegra. New features enabled are: * PMICs on Dalmore * CPU power-gating on Dalmore * HDMI output on Beaver * LP1 system suspend mode on almost all boards * PCIe support on numerous Tegra20/30 boards * USB support on Tegra30/114 boards * Audio capture on Beaver and Dalmore * Temperature sensor on Cardhu. ... along with a few DT cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSDl1bAAoJEMzrak5tbycx9N0P/RJ+R5z65hOQTDXn7fZ03o0P BZEhClVNyzo+K0SDLM/fwT4g8HfvNKOW34N53dknT9jKRH/bfEbAGFUl5KJl0l6g KsDLWXGOVWms7OYmCxykUH8xkHjkVO6tefQb0xJiqdt7wuRWupV3zgrA7aLaohnB 5FzA4mCcW+Mlyi3796uU8Ko5/QwsE8wpOBPK6phuE9+REL5bSWaxiGKg+oSBHLnF 0rF+7NxIQMLVZ1nXbZzZP8BrItufzcBYQTN95VPD023qCZIAQANApm8Aotr31FzF XmtEyt5rP20+8NFGhVlGv/RMV70QgQzE1IRJlHRwLYw3CLA1X5o81c5LV2IBdlcY TOR4QndOH8cUohVNnkcapHFEary8IAEA6C+eEReAPbARXcg6Oh4oMDMQ1RJEdulj YdNraC0VEzlrByJ/ZAhrF9DeDmSnlOYcooEHq/lWgq3nYOWDjiJEoAozFAQV5zS6 1X+cpPwwCA4S9sVcVpnTrCMq1KG9wrSNFmHT6x2N1bf/1BxhmgaMXSSTQ8EpJY0I 9iPZAOd2g04ownHd8hJWBmzwT8hZ0wbPhtC/0E9O1n6zh8YAArUKZkK23Bv4aemN qUbjOR2mjEyWNG0MN2h7CqFuU4NtAgc3kXrbPPAl9CYxJZJ2kdNmHvDkl0Y2QJ7S iPPJS7F8r60QQI+1LNqP =RGgU -----END PGP SIGNATURE----- Merge tag 'tegra-for-3.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt From: Stephen Warren: ARM: tegra: device tree changes for 3.12 This branch contains all *.dts (device tree) changes for Tegra. New features enabled are: * PMICs on Dalmore * CPU power-gating on Dalmore * HDMI output on Beaver * LP1 system suspend mode on almost all boards * PCIe support on numerous Tegra20/30 boards * USB support on Tegra30/114 boards * Audio capture on Beaver and Dalmore * Temperature sensor on Cardhu. ... along with a few DT cleanups. * tag 'tegra-for-3.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (25 commits) ARM: tegra: add Mic Jack to Dalmore device tree ARM: tegra: add Mic Jack to Beaver device tree ARM: tegra: add USB DT entries for Tegra114, Dalmore ARM: tegra: add USB DT entries for Tegra30 ARM: dts: tegra: Increase prefetchable PCI memory space ARM: tegra: Fix Beaver's PCIe lane configuration ARM: tegra: Enable PCIe controller on Beaver ARM: tegra: Enable PCIe controller on Cardhu ARM: tegra: Add Tegra30 PCIe support ARM: tegra: trimslice: Initialize PCIe from DT ARM: tegra: harmony: Initialize PCIe from DT ARM: tegra: tec: Add PCIe support ARM: tegra: tamonten: Add PCIe support ARM: tegra: Add Tegra20 PCIe support to DT ARM: tegra: enable LP1 suspend mode ARM: tegra: beaver: Enable HDMI output ARM: tegra: use TEGRA_GPIO() in a couple more places ARM: tegra: dalmore: fix the irq trigger type of Palmas MFD device ARM: tegra: define valid function names in DT document ARM: tegra: dalmore: add PM configurations for PMC ...
This commit is contained in:
commit
1fa5fcdafc
|
@ -80,6 +80,17 @@ Valid values for pin and group names are:
|
|||
dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
|
||||
gmh, owr, uda.
|
||||
|
||||
Valid values for nvidia,functions are:
|
||||
|
||||
blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
|
||||
displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
|
||||
extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
|
||||
i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
|
||||
pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
|
||||
rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
|
||||
spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
|
||||
usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
|
||||
|
||||
Example:
|
||||
|
||||
pinmux: pinmux {
|
||||
|
|
|
@ -103,6 +103,17 @@ Valid values for pin and group names are:
|
|||
drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
|
||||
drive_uda.
|
||||
|
||||
Valid values for nvidia,functions are:
|
||||
|
||||
ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
|
||||
displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
|
||||
hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
|
||||
osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
|
||||
pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
|
||||
sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
|
||||
spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
|
||||
vi, vi_sensor_clk, xio
|
||||
|
||||
Example:
|
||||
|
||||
pinctrl@70000000 {
|
||||
|
|
|
@ -91,6 +91,18 @@ Valid values for pin and group names are:
|
|||
gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
|
||||
uart3, uda, vi1.
|
||||
|
||||
Valid values for nvidia,functions are:
|
||||
|
||||
blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
|
||||
dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
|
||||
extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
|
||||
i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
|
||||
nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
|
||||
rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
|
||||
spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
|
||||
uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
|
||||
vi, vi_alt1, vi_alt2, vi_alt3
|
||||
|
||||
Example:
|
||||
|
||||
pinctrl@70000000 {
|
||||
|
|
|
@ -226,8 +226,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
|
|||
tegra30-beaver.dtb \
|
||||
tegra30-cardhu-a02.dtb \
|
||||
tegra30-cardhu-a04.dtb \
|
||||
tegra114-dalmore.dtb \
|
||||
tegra114-pluto.dtb
|
||||
tegra114-dalmore.dtb
|
||||
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
|
||||
versatile-pb.dtb
|
||||
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
|
||||
|
|
|
@ -791,7 +791,7 @@
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
dcdc3 {
|
||||
tps65090_dcdc3_reg: dcdc3 {
|
||||
regulator-name = "vdd-ao";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
@ -836,6 +836,180 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
palmas: tps65913 {
|
||||
compatible = "ti,palmas";
|
||||
reg = <0x58>;
|
||||
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
palmas_gpio: gpio {
|
||||
compatible = "ti,palmas-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pmic {
|
||||
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
|
||||
smps1-in-supply = <&tps65090_dcdc3_reg>;
|
||||
smps3-in-supply = <&tps65090_dcdc3_reg>;
|
||||
smps4-in-supply = <&tps65090_dcdc2_reg>;
|
||||
smps7-in-supply = <&tps65090_dcdc2_reg>;
|
||||
smps8-in-supply = <&tps65090_dcdc2_reg>;
|
||||
smps9-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo1-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo2-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo3-in-supply = <&palmas_smps3_reg>;
|
||||
ldo4-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo5-in-supply = <&vdd_ac_bat_reg>;
|
||||
ldo6-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo7-in-supply = <&tps65090_dcdc2_reg>;
|
||||
ldo8-in-supply = <&tps65090_dcdc3_reg>;
|
||||
ldo9-in-supply = <&palmas_smps9_reg>;
|
||||
ldoln-in-supply = <&tps65090_dcdc1_reg>;
|
||||
ldousb-in-supply = <&tps65090_dcdc1_reg>;
|
||||
|
||||
regulators {
|
||||
smps12 {
|
||||
regulator-name = "vddio-ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
palmas_smps3_reg: smps3 {
|
||||
regulator-name = "vddio-1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps45 {
|
||||
regulator-name = "vdd-core";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps457 {
|
||||
regulator-name = "vdd-core";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps8 {
|
||||
regulator-name = "avdd-pll";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
palmas_smps9_reg: smps9 {
|
||||
regulator-name = "sdhci-vdd-sd-slot";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1 {
|
||||
regulator-name = "avdd-cam1";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo2 {
|
||||
regulator-name = "avdd-cam2";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo3 {
|
||||
regulator-name = "avdd-dsi-csi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo4 {
|
||||
regulator-name = "vpp-fuse";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo6 {
|
||||
regulator-name = "vdd-sensor-2v85";
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
ldo7 {
|
||||
regulator-name = "vdd-af-cam1";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
ldo8 {
|
||||
regulator-name = "vdd-rtc";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
ti,enable-ldo8-tracking;
|
||||
};
|
||||
|
||||
ldo9 {
|
||||
regulator-name = "vddio-sdmmc-2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldoln {
|
||||
regulator-name = "hvdd-usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldousb {
|
||||
regulator-name = "avdd-usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
regen1 {
|
||||
regulator-name = "rail-3v3";
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
regen2 {
|
||||
regulator-name = "rail-5v0";
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc {
|
||||
compatible = "ti,palmas-rtc";
|
||||
interrupt-parent = <&palmas>;
|
||||
interrupts = <8 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000da00 {
|
||||
|
@ -850,6 +1024,13 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <500>;
|
||||
nvidia,cpu-pwr-off-time = <300>;
|
||||
nvidia,core-pwr-good-time = <641 3845>;
|
||||
nvidia,core-pwr-off-time = <61036>;
|
||||
nvidia,core-power-req-active-high;
|
||||
nvidia,sys-clock-req-active-high;
|
||||
};
|
||||
|
||||
ahub {
|
||||
|
@ -870,6 +1051,15 @@
|
|||
non-removable;
|
||||
};
|
||||
|
||||
usb@7d008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@7d008000 {
|
||||
status = "okay";
|
||||
vbus-supply = <&usb3_vbus_reg>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
@ -883,6 +1073,35 @@
|
|||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
home {
|
||||
label = "Home";
|
||||
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <102>; /* KEY_HOME */
|
||||
};
|
||||
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>; /* KEY_POWER */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
volume_down {
|
||||
label = "Volume Down";
|
||||
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <114>; /* KEY_VOLUMEDOWN */
|
||||
};
|
||||
|
||||
volume_up {
|
||||
label = "Volume Up";
|
||||
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <115>; /* KEY_VOLUMEUP */
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
@ -951,6 +1170,16 @@
|
|||
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&tps65090_dcdc1_reg>;
|
||||
};
|
||||
|
||||
vdd_cam_1v8_reg: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <6>;
|
||||
regulator-name = "vdd_cam_1v8_reg";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
enable-active-high;
|
||||
gpio = <&palmas_gpio 6 0>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
|
@ -964,7 +1193,9 @@
|
|||
"Speakers", "SPORP",
|
||||
"Speakers", "SPORN",
|
||||
"Speakers", "SPOLP",
|
||||
"Speakers", "SPOLN";
|
||||
"Speakers", "SPOLN",
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN2P", "Mic Jack";
|
||||
|
||||
nvidia,i2s-controller = <&tegra_i2s1>;
|
||||
nvidia,audio-codec = <&rt5640>;
|
||||
|
|
|
@ -1,33 +0,0 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "tegra114.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NVIDIA Tegra114 Pluto evaluation board";
|
||||
compatible = "nvidia,pluto", "nvidia,tegra114";
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
serial@70006300 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk32k_in: clock {
|
||||
compatible = "fixed-clock";
|
||||
reg=<0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -430,6 +430,68 @@
|
|||
status = "disable";
|
||||
};
|
||||
|
||||
usb@7d000000 {
|
||||
compatible = "nvidia,tegra30-ehci", "usb-ehci";
|
||||
reg = <0x7d000000 0x4000>;
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA114_CLK_USBD>;
|
||||
nvidia,phy = <&phy1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy1: usb-phy@7d000000 {
|
||||
compatible = "nvidia,tegra30-usb-phy";
|
||||
reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA114_CLK_USBD>,
|
||||
<&tegra_car TEGRA114_CLK_PLL_U>,
|
||||
<&tegra_car TEGRA114_CLK_USBD>;
|
||||
clock-names = "reg", "pll_u", "utmi-pads";
|
||||
nvidia,hssync-start-delay = <0>;
|
||||
nvidia,idle-wait-delay = <17>;
|
||||
nvidia,elastic-limit = <16>;
|
||||
nvidia,term-range-adj = <6>;
|
||||
nvidia,xcvr-setup = <9>;
|
||||
nvidia,xcvr-lsfslew = <0>;
|
||||
nvidia,xcvr-lsrslew = <3>;
|
||||
nvidia,hssquelch-level = <2>;
|
||||
nvidia,hsdiscon-level = <5>;
|
||||
nvidia,xcvr-hsslew = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@7d008000 {
|
||||
compatible = "nvidia,tegra30-ehci", "usb-ehci";
|
||||
reg = <0x7d008000 0x4000>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA114_CLK_USB3>;
|
||||
nvidia,phy = <&phy3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy3: usb-phy@7d008000 {
|
||||
compatible = "nvidia,tegra30-usb-phy";
|
||||
reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA114_CLK_USB3>,
|
||||
<&tegra_car TEGRA114_CLK_PLL_U>,
|
||||
<&tegra_car TEGRA114_CLK_USBD>;
|
||||
clock-names = "reg", "pll_u", "utmi-pads";
|
||||
nvidia,hssync-start-delay = <0>;
|
||||
nvidia,idle-wait-delay = <17>;
|
||||
nvidia,elastic-limit = <16>;
|
||||
nvidia,term-range-adj = <6>;
|
||||
nvidia,xcvr-setup = <9>;
|
||||
nvidia,xcvr-lsfslew = <0>;
|
||||
nvidia,xcvr-lsrslew = <3>;
|
||||
nvidia,hssquelch-level = <2>;
|
||||
nvidia,hsdiscon-level = <5>;
|
||||
nvidia,xcvr-hsslew = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
@ -363,7 +363,7 @@
|
|||
};
|
||||
|
||||
pmc {
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <5000>;
|
||||
nvidia,cpu-pwr-off-time = <5000>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
|
|
@ -335,7 +335,7 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo0 {
|
||||
pci_clk_reg: ldo0 {
|
||||
regulator-name = "vdd_ldo0,vddio_pex_clk";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
@ -417,7 +417,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <5000>;
|
||||
nvidia,cpu-pwr-off-time = <5000>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -425,6 +425,20 @@
|
|||
nvidia,sys-clock-req-active-high;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
pex-clk-supply = <&pci_clk_reg>;
|
||||
vdd-supply = <&pci_vdd_reg>;
|
||||
status = "okay";
|
||||
|
||||
pci@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb@c5000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -643,7 +657,7 @@
|
|||
enable-active-high;
|
||||
};
|
||||
|
||||
regulator@3 {
|
||||
pci_vdd_reg: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "vdd_1v05";
|
||||
|
@ -651,8 +665,6 @@
|
|||
regulator-max-microvolt = <1050000>;
|
||||
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
/* Hack until board-harmony-pcie.c is removed */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
regulator@4 {
|
||||
|
|
|
@ -417,7 +417,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <2000>;
|
||||
nvidia,cpu-pwr-off-time = <0>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
|
|
@ -518,7 +518,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <5000>;
|
||||
nvidia,cpu-pwr-off-time = <5000>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -829,7 +829,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio 24 0>; /* PD0 */
|
||||
gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -366,7 +366,7 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo0 {
|
||||
pci_clk_reg: ldo0 {
|
||||
regulator-name = "vdd_ldo0,vddio_pex_clk";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
@ -459,7 +459,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <5000>;
|
||||
nvidia,cpu-pwr-off-time = <5000>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -467,6 +467,11 @@
|
|||
nvidia,sys-clock-req-active-high;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
pex-clk-supply = <&pci_clk_reg>;
|
||||
vdd-supply = <&pci_vdd_reg>;
|
||||
};
|
||||
|
||||
usb@c5008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -509,5 +514,15 @@
|
|||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pci_vdd_reg: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "vdd_1v05";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
gpio = <&pmic 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
@ -32,6 +32,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
pci@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ad,tegra-audio-wm8903-tec",
|
||||
"nvidia,tegra-audio-wm8903";
|
||||
|
|
|
@ -302,7 +302,7 @@
|
|||
};
|
||||
|
||||
pmc {
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <5000>;
|
||||
nvidia,cpu-pwr-off-time = <5000>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -310,6 +310,16 @@
|
|||
nvidia,sys-clock-req-active-high;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pex-clk-supply = <&pci_clk_reg>;
|
||||
vdd-supply = <&pci_vdd_reg>;
|
||||
|
||||
pci@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb@c5000000 {
|
||||
status = "okay";
|
||||
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
|
||||
|
@ -411,7 +421,25 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio 170 0>; /* PV2 */
|
||||
gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
|
||||
};
|
||||
|
||||
pci_clk_reg: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "pci_clk";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pci_vdd_reg: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "pci_vdd";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -494,7 +494,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <2000>;
|
||||
nvidia,cpu-pwr-off-time = <100>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
|
|
@ -497,7 +497,7 @@
|
|||
|
||||
pmc {
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <2000>;
|
||||
nvidia,cpu-pwr-off-time = <1000>;
|
||||
nvidia,core-pwr-good-time = <0 3845>;
|
||||
|
|
|
@ -455,6 +455,61 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
compatible = "nvidia,tegra20-pcie";
|
||||
device_type = "pci";
|
||||
reg = <0x80003000 0x00000800 /* PADS registers */
|
||||
0x80003800 0x00000200 /* AFI registers */
|
||||
0x90000000 0x10000000>; /* configuration space */
|
||||
reg-names = "pads", "afi", "cs";
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
|
||||
GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
||||
interrupt-names = "intr", "msi";
|
||||
|
||||
bus-range = <0x00 0xff>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
|
||||
0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
|
||||
0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
|
||||
0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */
|
||||
0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
|
||||
|
||||
clocks = <&tegra_car TEGRA20_CLK_PEX>,
|
||||
<&tegra_car TEGRA20_CLK_AFI>,
|
||||
<&tegra_car TEGRA20_CLK_PCIE_XCLK>,
|
||||
<&tegra_car TEGRA20_CLK_PLL_E>;
|
||||
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
|
||||
status = "disabled";
|
||||
|
||||
pci@1,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
|
||||
reg = <0x000800 0 0 0 0>;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
|
||||
reg = <0x001000 0 0 0 0>;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@c5000000 {
|
||||
compatible = "nvidia,tegra20-ehci", "usb-ehci";
|
||||
reg = <0xc5000000 0x4000>;
|
||||
|
|
|
@ -10,6 +10,40 @@
|
|||
reg = <0x80000000 0x7ff00000>;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pex-clk-supply = <&sys_3v3_pexs_reg>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
avdd-supply = <&ldo2_reg>;
|
||||
|
||||
pci@1,0 {
|
||||
status = "okay";
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@3,0 {
|
||||
status = "okay";
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
host1x {
|
||||
hdmi {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&sys_3v3_reg>;
|
||||
pll-supply = <&vio_reg>;
|
||||
|
||||
nvidia,hpd-gpio =
|
||||
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
|
||||
nvidia,ddc-i2c-bus = <&hdmiddc>;
|
||||
};
|
||||
};
|
||||
|
||||
pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
@ -76,6 +110,11 @@
|
|||
nvidia,pull = <0>;
|
||||
nvidia,tristate = <0>;
|
||||
};
|
||||
pex_l1_prsnt_n_pdd4 {
|
||||
nvidia,pins = "pex_l1_prsnt_n_pdd4",
|
||||
"pex_l1_clkreq_n_pdd6";
|
||||
nvidia,pull = <2>;
|
||||
};
|
||||
sdio3 {
|
||||
nvidia,pins = "drive_sdio3";
|
||||
nvidia,high-speed-mode = <0>;
|
||||
|
@ -85,6 +124,10 @@
|
|||
nvidia,slew-rate-rising = <1>;
|
||||
nvidia,slew-rate-falling = <1>;
|
||||
};
|
||||
gpv {
|
||||
nvidia,pins = "drive_gpv";
|
||||
nvidia,pull-up-strength = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -107,7 +150,7 @@
|
|||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
i2c@7000c700 {
|
||||
hdmiddc: i2c@7000c700 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
@ -262,7 +305,7 @@
|
|||
pmc {
|
||||
status = "okay";
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <2000>;
|
||||
nvidia,cpu-pwr-off-time = <200>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -285,6 +328,15 @@
|
|||
non-removable;
|
||||
};
|
||||
|
||||
usb@7d008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@7d008000 {
|
||||
vbus-supply = <&usb3_vbus_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
@ -357,7 +409,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
@ -369,7 +421,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
@ -421,7 +473,9 @@
|
|||
|
||||
nvidia,audio-routing =
|
||||
"Headphones", "HPOR",
|
||||
"Headphones", "HPOL";
|
||||
"Headphones", "HPOL",
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN2P", "Mic Jack";
|
||||
|
||||
nvidia,i2s-controller = <&tegra_i2s1>;
|
||||
nvidia,audio-codec = <&rt5640>;
|
||||
|
|
|
@ -31,6 +31,26 @@
|
|||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pex-clk-supply = <&pex_hvdd_3v3_reg>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
avdd-supply = <&ldo2_reg>;
|
||||
|
||||
pci@1,0 {
|
||||
nvidia,num-lanes = <4>;
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
nvidia,num-lanes = <1>;
|
||||
};
|
||||
|
||||
pci@3,0 {
|
||||
status = "okay";
|
||||
nvidia,num-lanes = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
@ -173,19 +193,6 @@
|
|||
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
|
||||
};
|
||||
|
||||
tps62361 {
|
||||
compatible = "ti,tps62361";
|
||||
reg = <0x60>;
|
||||
|
||||
regulator-name = "tps62361-vout";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
ti,vsel0-state-high;
|
||||
ti,vsel1-state-high;
|
||||
};
|
||||
|
||||
pmic: tps65911@2d {
|
||||
compatible = "ti,tps65911";
|
||||
reg = <0x2d>;
|
||||
|
@ -286,6 +293,26 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
nct1008 {
|
||||
compatible = "onnn,nct1008";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
tps62361 {
|
||||
compatible = "ti,tps62361";
|
||||
reg = <0x60>;
|
||||
|
||||
regulator-name = "tps62361-vout";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
ti,vsel0-state-high;
|
||||
ti,vsel1-state-high;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000da00 {
|
||||
|
@ -307,7 +334,7 @@
|
|||
pmc {
|
||||
status = "okay";
|
||||
nvidia,invert-interrupt;
|
||||
nvidia,suspend-mode = <2>;
|
||||
nvidia,suspend-mode = <1>;
|
||||
nvidia,cpu-pwr-good-time = <2000>;
|
||||
nvidia,cpu-pwr-off-time = <200>;
|
||||
nvidia,core-pwr-good-time = <3845 3845>;
|
||||
|
@ -330,6 +357,15 @@
|
|||
non-removable;
|
||||
};
|
||||
|
||||
usb@7d008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@7d008000 {
|
||||
vbus-supply = <&usb3_vbus_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
|
|
@ -16,6 +16,76 @@
|
|||
serial4 = &uarte;
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
compatible = "nvidia,tegra30-pcie";
|
||||
device_type = "pci";
|
||||
reg = <0x00003000 0x00000800 /* PADS registers */
|
||||
0x00003800 0x00000200 /* AFI registers */
|
||||
0x10000000 0x10000000>; /* configuration space */
|
||||
reg-names = "pads", "afi", "cs";
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
|
||||
GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
||||
interrupt-names = "intr", "msi";
|
||||
|
||||
bus-range = <0x00 0xff>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
|
||||
0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
|
||||
0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
|
||||
0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
|
||||
0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
|
||||
0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
|
||||
|
||||
clocks = <&tegra_car TEGRA30_CLK_PCIE>,
|
||||
<&tegra_car TEGRA30_CLK_AFI>,
|
||||
<&tegra_car TEGRA30_CLK_PCIEX>,
|
||||
<&tegra_car TEGRA30_CLK_PLL_E>,
|
||||
<&tegra_car TEGRA30_CLK_CML0>;
|
||||
clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
|
||||
status = "disabled";
|
||||
|
||||
pci@1,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
|
||||
reg = <0x000800 0 0 0 0>;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
|
||||
reg = <0x001000 0 0 0 0>;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@3,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
|
||||
reg = <0x001800 0 0 0 0>;
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
host1x {
|
||||
compatible = "nvidia,tegra30-host1x", "simple-bus";
|
||||
reg = <0x50000000 0x00024000>;
|
||||
|
@ -561,6 +631,92 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@7d000000 {
|
||||
compatible = "nvidia,tegra30-ehci", "usb-ehci";
|
||||
reg = <0x7d000000 0x4000>;
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USBD>;
|
||||
nvidia,needs-double-reset;
|
||||
nvidia,phy = <&phy1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy1: usb-phy@7d000000 {
|
||||
compatible = "nvidia,tegra30-usb-phy";
|
||||
reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USBD>,
|
||||
<&tegra_car TEGRA30_CLK_PLL_U>,
|
||||
<&tegra_car TEGRA30_CLK_USBD>;
|
||||
clock-names = "reg", "pll_u", "utmi-pads";
|
||||
nvidia,hssync-start-delay = <9>;
|
||||
nvidia,idle-wait-delay = <17>;
|
||||
nvidia,elastic-limit = <16>;
|
||||
nvidia,term-range-adj = <6>;
|
||||
nvidia,xcvr-setup = <51>;
|
||||
nvidia.xcvr-setup-use-fuses;
|
||||
nvidia,xcvr-lsfslew = <1>;
|
||||
nvidia,xcvr-lsrslew = <1>;
|
||||
nvidia,xcvr-hsslew = <32>;
|
||||
nvidia,hssquelch-level = <2>;
|
||||
nvidia,hsdiscon-level = <5>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@7d004000 {
|
||||
compatible = "nvidia,tegra30-ehci", "usb-ehci";
|
||||
reg = <0x7d004000 0x4000>;
|
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy_type = "ulpi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USB2>;
|
||||
nvidia,phy = <&phy2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy2: usb-phy@7d004000 {
|
||||
compatible = "nvidia,tegra30-usb-phy";
|
||||
reg = <0x7d004000 0x4000>;
|
||||
phy_type = "ulpi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USB2>,
|
||||
<&tegra_car TEGRA30_CLK_PLL_U>,
|
||||
<&tegra_car TEGRA30_CLK_CDEV2>;
|
||||
clock-names = "reg", "pll_u", "ulpi-link";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@7d008000 {
|
||||
compatible = "nvidia,tegra30-ehci", "usb-ehci";
|
||||
reg = <0x7d008000 0x4000>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USB3>;
|
||||
nvidia,phy = <&phy3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy3: usb-phy@7d008000 {
|
||||
compatible = "nvidia,tegra30-usb-phy";
|
||||
reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
|
||||
phy_type = "utmi";
|
||||
clocks = <&tegra_car TEGRA30_CLK_USB3>,
|
||||
<&tegra_car TEGRA30_CLK_PLL_U>,
|
||||
<&tegra_car TEGRA30_CLK_USBD>;
|
||||
clock-names = "reg", "pll_u", "utmi-pads";
|
||||
nvidia,hssync-start-delay = <0>;
|
||||
nvidia,idle-wait-delay = <17>;
|
||||
nvidia,elastic-limit = <16>;
|
||||
nvidia,term-range-adj = <6>;
|
||||
nvidia,xcvr-setup = <51>;
|
||||
nvidia.xcvr-setup-use-fuses;
|
||||
nvidia,xcvr-lsfslew = <2>;
|
||||
nvidia,xcvr-lsrslew = <2>;
|
||||
nvidia,xcvr-hsslew = <32>;
|
||||
nvidia,hssquelch-level = <2>;
|
||||
nvidia,hsdiscon-level = <5>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
Loading…
Reference in a new issue