hwmon: (pmbus) Add support for Intersil power management chips
Add support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
This commit is contained in:
Guenter Roeck
parent
da8e48ab48
commit
200855e52d
125
Documentation/hwmon/zl6100
Normal file
125
Documentation/hwmon/zl6100
Normal file
|
|
@ -0,0 +1,125 @@
|
|||
Kernel driver zl6100
|
||||
====================
|
||||
|
||||
Supported chips:
|
||||
* Intersil / Zilker Labs ZL2004
|
||||
Prefix: 'zl2004'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
|
||||
* Intersil / Zilker Labs ZL2006
|
||||
Prefix: 'zl2006'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
|
||||
* Intersil / Zilker Labs ZL2008
|
||||
Prefix: 'zl2008'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
|
||||
* Intersil / Zilker Labs ZL2105
|
||||
Prefix: 'zl2105'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
|
||||
* Intersil / Zilker Labs ZL2106
|
||||
Prefix: 'zl2106'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
|
||||
* Intersil / Zilker Labs ZL6100
|
||||
Prefix: 'zl6100'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
|
||||
* Intersil / Zilker Labs ZL6105
|
||||
Prefix: 'zl6105'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
|
||||
|
||||
Author: Guenter Roeck <guenter.roeck@ericsson.com>
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver supports hardware montoring for Intersil / Zilker Labs ZL6100 and
|
||||
compatible digital DC-DC controllers.
|
||||
|
||||
The driver is a client driver to the core PMBus driver. Please see
|
||||
Documentation/hwmon/pmbus and Documentation.hwmon/pmbus-core for details
|
||||
on PMBus client drivers.
|
||||
|
||||
|
||||
Usage Notes
|
||||
-----------
|
||||
|
||||
This driver does not auto-detect devices. You will have to instantiate the
|
||||
devices explicitly. Please see Documentation/i2c/instantiating-devices for
|
||||
details.
|
||||
|
||||
WARNING: Do not access chip registers using the i2cdump command, and do not use
|
||||
any of the i2ctools commands on a command register used to save and restore
|
||||
configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
|
||||
this driver interpret any access to those command registers (including read
|
||||
commands) as request to execute the command in question. Unless write accesses
|
||||
to those registers are protected, this may result in power loss, board resets,
|
||||
and/or Flash corruption. Worst case, your board may turn into a brick.
|
||||
|
||||
|
||||
Platform data support
|
||||
---------------------
|
||||
|
||||
The driver supports standard PMBus driver platform data.
|
||||
|
||||
|
||||
Module parameters
|
||||
-----------------
|
||||
|
||||
delay
|
||||
-----
|
||||
|
||||
Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
|
||||
I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
|
||||
1 ms appears to be sufficient and has not caused any problems in testing.
|
||||
The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
|
||||
affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
|
||||
except for ZL2004 and ZL6105. To enable manual override, the driver provides a
|
||||
writeable module parameter, 'delay', which can be used to set the interval to
|
||||
a value between 0 and 65,535 microseconds.
|
||||
|
||||
|
||||
Sysfs entries
|
||||
-------------
|
||||
|
||||
The following attributes are supported. Limits are read-write; all other
|
||||
attributes are read-only.
|
||||
|
||||
in1_label "vin"
|
||||
in1_input Measured input voltage.
|
||||
in1_min Minimum input voltage.
|
||||
in1_max Maximum input voltage.
|
||||
in1_lcrit Critical minumum input voltage.
|
||||
in1_crit Critical maximum input voltage.
|
||||
in1_min_alarm Input voltage low alarm.
|
||||
in1_max_alarm Input voltage high alarm.
|
||||
in1_lcrit_alarm Input voltage critical low alarm.
|
||||
in1_crit_alarm Input voltage critical high alarm.
|
||||
|
||||
in2_label "vout1"
|
||||
in2_input Measured output voltage.
|
||||
in2_lcrit Critical minumum output Voltage.
|
||||
in2_crit Critical maximum output voltage.
|
||||
in2_lcrit_alarm Critical output voltage critical low alarm.
|
||||
in2_crit_alarm Critical output voltage critical high alarm.
|
||||
|
||||
curr1_label "iout1"
|
||||
curr1_input Measured output current.
|
||||
curr1_lcrit Critical minimum output current.
|
||||
curr1_crit Critical maximum output current.
|
||||
curr1_lcrit_alarm Output current critical low alarm.
|
||||
curr1_crit_alarm Output current critical high alarm.
|
||||
|
||||
temp[12]_input Measured temperature.
|
||||
temp[12]_min Minimum temperature.
|
||||
temp[12]_max Maximum temperature.
|
||||
temp[12]_lcrit Critical low temperature.
|
||||
temp[12]_crit Critical high temperature.
|
||||
temp[12]_min_alarm Chip temperature low alarm.
|
||||
temp[12]_max_alarm Chip temperature high alarm.
|
||||
temp[12]_lcrit_alarm Chip temperature critical low alarm.
|
||||
temp[12]_crit_alarm Chip temperature critical high alarm.
|
||||
|
|
@ -98,4 +98,15 @@ config SENSORS_UCD9200
|
|||
This driver can also be built as a module. If so, the module will
|
||||
be called ucd9200.
|
||||
|
||||
config SENSORS_ZL6100
|
||||
tristate "Intersil ZL6100 and compatibles"
|
||||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Intersil
|
||||
ZL2004, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105 Digital
|
||||
DC/DC Controllers.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called zl6100.
|
||||
|
||||
endif # PMBUS
|
||||
|
|
|
|||
|
|
@ -11,3 +11,4 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
|
|||
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
|
||||
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
|
||||
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
|
||||
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
|
||||
|
|
|
|||
256
drivers/hwmon/pmbus/zl6100.c
Normal file
256
drivers/hwmon/pmbus/zl6100.c
Normal file
|
|
@ -0,0 +1,256 @@
|
|||
/*
|
||||
* Hardware monitoring driver for ZL6100 and compatibles
|
||||
*
|
||||
* Copyright (c) 2011 Ericsson AB.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/ktime.h>
|
||||
#include <linux/delay.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { zl2004, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 };
|
||||
|
||||
struct zl6100_data {
|
||||
int id;
|
||||
ktime_t access; /* chip access time */
|
||||
struct pmbus_driver_info info;
|
||||
};
|
||||
|
||||
#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
|
||||
|
||||
#define ZL6100_DEVICE_ID 0xe4
|
||||
|
||||
#define ZL6100_WAIT_TIME 1000 /* uS */
|
||||
|
||||
static ushort delay = ZL6100_WAIT_TIME;
|
||||
module_param(delay, ushort, 0644);
|
||||
MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
|
||||
|
||||
/* Some chips need a delay between accesses */
|
||||
static inline void zl6100_wait(const struct zl6100_data *data)
|
||||
{
|
||||
if (delay) {
|
||||
s64 delta = ktime_us_delta(ktime_get(), data->access);
|
||||
if (delta < delay)
|
||||
udelay(delay - delta);
|
||||
}
|
||||
}
|
||||
|
||||
static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
struct zl6100_data *data = to_zl6100_data(info);
|
||||
int ret;
|
||||
|
||||
if (page || reg >= PMBUS_VIRT_BASE)
|
||||
return -ENXIO;
|
||||
|
||||
zl6100_wait(data);
|
||||
ret = pmbus_read_word_data(client, page, reg);
|
||||
data->access = ktime_get();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
struct zl6100_data *data = to_zl6100_data(info);
|
||||
int ret;
|
||||
|
||||
if (page > 0)
|
||||
return -ENXIO;
|
||||
|
||||
zl6100_wait(data);
|
||||
ret = pmbus_read_byte_data(client, page, reg);
|
||||
data->access = ktime_get();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
|
||||
u16 word)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
struct zl6100_data *data = to_zl6100_data(info);
|
||||
int ret;
|
||||
|
||||
if (page || reg >= PMBUS_VIRT_BASE)
|
||||
return -ENXIO;
|
||||
|
||||
zl6100_wait(data);
|
||||
ret = pmbus_write_word_data(client, page, reg, word);
|
||||
data->access = ktime_get();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
struct zl6100_data *data = to_zl6100_data(info);
|
||||
int ret;
|
||||
|
||||
if (page > 0)
|
||||
return -ENXIO;
|
||||
|
||||
zl6100_wait(data);
|
||||
ret = pmbus_write_byte(client, page, value);
|
||||
data->access = ktime_get();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id zl6100_id[] = {
|
||||
{"zl2004", zl2004},
|
||||
{"zl2006", zl2006},
|
||||
{"zl2008", zl2008},
|
||||
{"zl2105", zl2105},
|
||||
{"zl2106", zl2106},
|
||||
{"zl6100", zl6100},
|
||||
{"zl6105", zl6105},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, zl6100_id);
|
||||
|
||||
static int zl6100_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
struct zl6100_data *data;
|
||||
struct pmbus_driver_info *info;
|
||||
u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
|
||||
const struct i2c_device_id *mid;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_BYTE_DATA
|
||||
| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
|
||||
device_id);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Failed to read device ID\n");
|
||||
return ret;
|
||||
}
|
||||
device_id[ret] = '\0';
|
||||
dev_info(&client->dev, "Device ID %s\n", device_id);
|
||||
|
||||
mid = NULL;
|
||||
for (mid = zl6100_id; mid->name[0]; mid++) {
|
||||
if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
|
||||
break;
|
||||
}
|
||||
if (!mid->name[0]) {
|
||||
dev_err(&client->dev, "Unsupported device\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
if (id->driver_data != mid->driver_data)
|
||||
dev_notice(&client->dev,
|
||||
"Device mismatch: Configured %s, detected %s\n",
|
||||
id->name, mid->name);
|
||||
|
||||
data = kzalloc(sizeof(struct zl6100_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->id = mid->driver_data;
|
||||
|
||||
/*
|
||||
* ZL2008, ZL2105, and ZL6100 are known to require a wait time
|
||||
* between I2C accesses. ZL2004 and ZL6105 are known to be safe.
|
||||
*
|
||||
* Only clear the wait time for chips known to be safe. The wait time
|
||||
* can be cleared later for additional chips if tests show that it
|
||||
* is not needed (in other words, better be safe than sorry).
|
||||
*/
|
||||
if (data->id == zl2004 || data->id == zl6105)
|
||||
delay = 0;
|
||||
|
||||
/*
|
||||
* Since there was a direct I2C device access above, wait before
|
||||
* accessing the chip again.
|
||||
* Set the timestamp, wait, then set it again. This should provide
|
||||
* enough buffer time to be safe.
|
||||
*/
|
||||
data->access = ktime_get();
|
||||
zl6100_wait(data);
|
||||
data->access = ktime_get();
|
||||
|
||||
info = &data->info;
|
||||
|
||||
info->pages = 1;
|
||||
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
|
||||
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
|
||||
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
|
||||
| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
|
||||
|
||||
info->read_word_data = zl6100_read_word_data;
|
||||
info->read_byte_data = zl6100_read_byte_data;
|
||||
info->write_word_data = zl6100_write_word_data;
|
||||
info->write_byte = zl6100_write_byte;
|
||||
|
||||
ret = pmbus_do_probe(client, mid, info);
|
||||
if (ret)
|
||||
goto err_mem;
|
||||
return 0;
|
||||
|
||||
err_mem:
|
||||
kfree(data);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int zl6100_remove(struct i2c_client *client)
|
||||
{
|
||||
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
|
||||
const struct zl6100_data *data = to_zl6100_data(info);
|
||||
|
||||
pmbus_do_remove(client);
|
||||
kfree(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver zl6100_driver = {
|
||||
.driver = {
|
||||
.name = "zl6100",
|
||||
},
|
||||
.probe = zl6100_probe,
|
||||
.remove = zl6100_remove,
|
||||
.id_table = zl6100_id,
|
||||
};
|
||||
|
||||
static int __init zl6100_init(void)
|
||||
{
|
||||
return i2c_add_driver(&zl6100_driver);
|
||||
}
|
||||
|
||||
static void __exit zl6100_exit(void)
|
||||
{
|
||||
i2c_del_driver(&zl6100_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Guenter Roeck");
|
||||
MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
|
||||
MODULE_LICENSE("GPL");
|
||||
module_init(zl6100_init);
|
||||
module_exit(zl6100_exit);
|
||||
Loading…
Reference in a new issue