diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index f46cd0250e48..5627917c5ff7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -95,8 +95,10 @@ static void ath9k_htc_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) if ((vif->type == NL80211_IFTYPE_AP || vif->type == NL80211_IFTYPE_MESH_POINT) && - bss_conf->enable_beacon) + bss_conf->enable_beacon) { priv->reconfig_beacon = true; + priv->rearm_ani = true; + } if (bss_conf->assoc) { priv->rearm_ani = true; @@ -257,6 +259,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, ath9k_htc_ps_wakeup(priv); + ath9k_htc_stop_ani(priv); del_timer_sync(&priv->tx.cleanup_timer); ath9k_htc_tx_drain(priv); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index afb3d15e38ff..be1985296bdc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4948,7 +4948,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_if *ifp) if (!err) { /* only set 2G bandwidth using bw_cap command */ band_bwcap.band = cpu_to_le32(WLC_BAND_2G); - band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT); + band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ); err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap, sizeof(band_bwcap)); } else { diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c index fa858d548d13..0489314425cb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex.c @@ -611,14 +611,14 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO); if (IWL_MVM_BT_COEX_CORUNNING) { - bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 | - BT_VALID_CORUN_LUT_40); + bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_CORUN_LUT_20 | + BT_VALID_CORUN_LUT_40); bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING); } if (IWL_MVM_BT_COEX_MPLUT) { bt_cmd->flags |= cpu_to_le32(BT_COEX_MPLUT); - bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_MULTI_PRIO_LUT); + bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_MULTI_PRIO_LUT); } if (mvm->cfg->bt_shared_single_ant) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 9426905de6b2..d73a89ecd78a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -183,9 +183,9 @@ enum iwl_scan_type { * this number of packets were received (typically 1) * @passive2active: is auto switching from passive to active during scan allowed * @rxchain_sel_flags: RXON_RX_CHAIN_* - * @max_out_time: in usecs, max out of serving channel time + * @max_out_time: in TUs, max out of serving channel time * @suspend_time: how long to pause scan when returning to service channel: - * bits 0-19: beacon interal in usecs (suspend before executing) + * bits 0-19: beacon interal in TUs (suspend before executing) * bits 20-23: reserved * bits 24-31: number of beacons (suspend between channels) * @rxon_flags: RXON_FLG_* @@ -383,8 +383,8 @@ enum scan_framework_client { * @quiet_plcp_th: quiet channel num of packets threshold * @good_CRC_th: passive to active promotion threshold * @rx_chain: RXON rx chain. - * @max_out_time: max uSec to be out of assoceated channel - * @suspend_time: pause scan this long when returning to service channel + * @max_out_time: max TUs to be out of assoceated channel + * @suspend_time: pause scan this TUs when returning to service channel * @flags: RXON flags * @filter_flags: RXONfilter * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index f0cebf12c7b8..b41dc84e9431 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1007,7 +1007,7 @@ static void iwl_mvm_mc_iface_iterator(void *_data, u8 *mac, memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN); len = roundup(sizeof(*cmd) + cmd->count * ETH_ALEN, 4); - ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, len, cmd); + ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_ASYNC, len, cmd); if (ret) IWL_ERR(mvm, "mcast filter cmd error. ret=%d\n", ret); } @@ -1023,7 +1023,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm) if (WARN_ON_ONCE(!mvm->mcast_filter_cmd)) return; - ieee80211_iterate_active_interfaces( + ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_mc_iface_iterator, &iter_data); } @@ -1807,6 +1807,11 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); + if (!iwl_mvm_is_idle(mvm)) { + ret = -EBUSY; + goto out; + } + switch (mvm->scan_status) { case IWL_MVM_SCAN_OS: IWL_DEBUG_SCAN(mvm, "Stopping previous scan for sched_scan\n"); diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d564233a65da..f1ec0986c3c9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -1003,6 +1003,9 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif) return mvmvif->low_latency; } +/* Assoc status */ +bool iwl_mvm_is_idle(struct iwl_mvm *mvm); + /* Thermal management and CT-kill */ void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff); void iwl_mvm_tt_handler(struct iwl_mvm *mvm); diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 9f52c5b3f0ec..e1c838899363 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1010,7 +1010,7 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband, return; } -#ifdef CPTCFG_MAC80211_DEBUGFS +#ifdef CONFIG_MAC80211_DEBUGFS /* Disable last tx check if we are debugging with fixed rate */ if (lq_sta->dbg_fixed_rate) { IWL_DEBUG_RATE(mvm, "Fixed rate. avoid rate scaling\n"); diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index c91dc8498852..c28de54c75d4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -277,51 +277,22 @@ static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_scan_condition_iterator, &global_bound); - /* - * Under low latency traffic passive scan is fragmented meaning - * that dwell on a particular channel will be fragmented. Each fragment - * dwell time is 20ms and fragments period is 105ms. Skipping to next - * channel will be delayed by the same period - 105ms. So suspend_time - * parameter describing both fragments and channels skipping periods is - * set to 105ms. This value is chosen so that overall passive scan - * duration will not be too long. Max_out_time in this case is set to - * 70ms, so for active scanning operating channel will be left for 70ms - * while for passive still for 20ms (fragment dwell). - */ - if (global_bound) { - if (!iwl_mvm_low_latency(mvm)) { - params->suspend_time = ieee80211_tu_to_usec(100); - params->max_out_time = ieee80211_tu_to_usec(600); - } else { - params->suspend_time = ieee80211_tu_to_usec(105); - /* P2P doesn't support fragmented passive scan, so - * configure max_out_time to be at least longest dwell - * time for passive scan. - */ - if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) { - params->max_out_time = ieee80211_tu_to_usec(70); - params->passive_fragmented = true; - } else { - u32 passive_dwell; - /* - * Use band G so that passive channel dwell time - * will be assigned with maximum value. - */ - band = IEEE80211_BAND_2GHZ; - passive_dwell = iwl_mvm_get_passive_dwell(band); - params->max_out_time = - ieee80211_tu_to_usec(passive_dwell); - } - } + if (!global_bound) + goto not_bound; + + params->suspend_time = 100; + params->max_out_time = 600; + + if (iwl_mvm_low_latency(mvm)) { + params->suspend_time = 250; + params->max_out_time = 250; } +not_bound: + for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) { - if (params->passive_fragmented) - params->dwell[band].passive = 20; - else - params->dwell[band].passive = - iwl_mvm_get_passive_dwell(band); + params->dwell[band].passive = iwl_mvm_get_passive_dwell(band); params->dwell[band].active = iwl_mvm_get_active_dwell(band, n_ssids); } @@ -761,7 +732,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels; int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; int head = 0; - int tail = band_2ghz + band_5ghz; + int tail = band_2ghz + band_5ghz - 1; u32 ssid_bitmap; int cmd_len; int ret; diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index d619851745a1..2180902266ae 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -644,3 +644,22 @@ bool iwl_mvm_low_latency(struct iwl_mvm *mvm) return result; } + +static void iwl_mvm_idle_iter(void *_data, u8 *mac, struct ieee80211_vif *vif) +{ + bool *idle = _data; + + if (!vif->bss_conf.idle) + *idle = false; +} + +bool iwl_mvm_is_idle(struct iwl_mvm *mvm) +{ + bool idle = true; + + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_idle_iter, &idle); + + return idle; +} diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index dcfd6d866d09..2365553f1ef7 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1749,6 +1749,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, * PCI Tx retries from interfering with C3 CPU state */ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + trans->dev = &pdev->dev; + trans_pcie->pci_dev = pdev; + iwl_disable_interrupts(trans); + err = pci_enable_msi(pdev); if (err) { dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err); @@ -1760,8 +1764,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } } - trans->dev = &pdev->dev; - trans_pcie->pci_dev = pdev; trans->hw_rev = iwl_read32(trans, CSR_HW_REV); trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; snprintf(trans->hw_id_str, sizeof(trans->hw_id_str), @@ -1787,8 +1789,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, goto out_pci_disable_msi; } - trans_pcie->inta_mask = CSR_INI_SET_MASK; - if (iwl_pcie_alloc_ict(trans)) goto out_free_cmd_pool; @@ -1800,6 +1800,8 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, goto out_free_ict; } + trans_pcie->inta_mask = CSR_INI_SET_MASK; + return trans; out_free_ict: diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1ba9d626aa83..194c1eab04d8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3856,6 +3856,8 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only + * here to reserve the value for API/ABI compatibility) * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode @@ -3897,7 +3899,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, - /* bit 4 is reserved - don't use */ + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 222c28b75315..f169b6ee94ee 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -317,6 +317,7 @@ struct ieee80211_roc_work { bool started, abort, hw_begun, notified; bool to_be_freed; + bool on_channel; unsigned long hw_start_time; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index dee50aefd6e8..27600a9808ba 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3598,18 +3598,24 @@ void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) sdata_lock(sdata); - if (ifmgd->auth_data) { + if (ifmgd->auth_data || ifmgd->assoc_data) { + const u8 *bssid = ifmgd->auth_data ? + ifmgd->auth_data->bss->bssid : + ifmgd->assoc_data->bss->bssid; + /* - * If we are trying to authenticate while suspending, cfg80211 - * won't know and won't actually abort those attempts, thus we - * need to do that ourselves. + * If we are trying to authenticate / associate while suspending, + * cfg80211 won't know and won't actually abort those attempts, + * thus we need to do that ourselves. */ - ieee80211_send_deauth_disassoc(sdata, - ifmgd->auth_data->bss->bssid, + ieee80211_send_deauth_disassoc(sdata, bssid, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DEAUTH_LEAVING, false, frame_buf); - ieee80211_destroy_auth_data(sdata, false); + if (ifmgd->assoc_data) + ieee80211_destroy_assoc_data(sdata, false); + if (ifmgd->auth_data) + ieee80211_destroy_auth_data(sdata, false); cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); } diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 6fb38558a5e6..7a17decd27f9 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -333,7 +333,7 @@ void ieee80211_sw_roc_work(struct work_struct *work) container_of(work, struct ieee80211_roc_work, work.work); struct ieee80211_sub_if_data *sdata = roc->sdata; struct ieee80211_local *local = sdata->local; - bool started; + bool started, on_channel; mutex_lock(&local->mtx); @@ -354,14 +354,26 @@ void ieee80211_sw_roc_work(struct work_struct *work) if (!roc->started) { struct ieee80211_roc_work *dep; - /* start this ROC */ - ieee80211_offchannel_stop_vifs(local); + WARN_ON(local->use_chanctx); - /* switch channel etc */ + /* If actually operating on the desired channel (with at least + * 20 MHz channel width) don't stop all the operations but still + * treat it as though the ROC operation started properly, so + * other ROC operations won't interfere with this one. + */ + roc->on_channel = roc->chan == local->_oper_chandef.chan && + local->_oper_chandef.width != NL80211_CHAN_WIDTH_5 && + local->_oper_chandef.width != NL80211_CHAN_WIDTH_10; + + /* start this ROC */ ieee80211_recalc_idle(local); - local->tmp_channel = roc->chan; - ieee80211_hw_config(local, 0); + if (!roc->on_channel) { + ieee80211_offchannel_stop_vifs(local); + + local->tmp_channel = roc->chan; + ieee80211_hw_config(local, 0); + } /* tell userspace or send frame */ ieee80211_handle_roc_started(roc); @@ -380,9 +392,10 @@ void ieee80211_sw_roc_work(struct work_struct *work) finish: list_del(&roc->list); started = roc->started; + on_channel = roc->on_channel; ieee80211_roc_notify_destroy(roc, !roc->abort); - if (started) { + if (started && !on_channel) { ieee80211_flush_queues(local, NULL); local->tmp_channel = NULL; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a0b0aea76525..cec5b60487a4 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -21,10 +21,10 @@ #define VIF_ENTRY __field(enum nl80211_iftype, vif_type) __field(void *, sdata) \ __field(bool, p2p) \ - __string(vif_name, sdata->dev ? sdata->dev->name : "") + __string(vif_name, sdata->name) #define VIF_ASSIGN __entry->vif_type = sdata->vif.type; __entry->sdata = sdata; \ __entry->p2p = sdata->vif.p2p; \ - __assign_str(vif_name, sdata->dev ? sdata->dev->name : sdata->name) + __assign_str(vif_name, sdata->name) #define VIF_PR_FMT " vif:%s(%d%s)" #define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : "" diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index e9e36a256165..9265adfdabfc 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -129,9 +129,12 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; - /* A VHT STA must support 40 MHz */ - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return; + /* + * A VHT STA must support 40 MHz, but if we verify that here + * then we break a few things - some APs (e.g. Netgear R6300v2 + * and others based on the BCM4360 chipset) will unset this + * capability bit when operating in 20 MHz. + */ vht_cap->vht_supported = true;