iio:pressure: Add STMicroelectronics pressures driver
This patch adds a generic pressure driver for STMicroelectronics pressure sensors, currently it supports: LPS331AP. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
607a568ab6
commit
217494e5b7
|
@ -73,5 +73,6 @@ source "drivers/iio/magnetometer/Kconfig"
|
|||
if IIO_TRIGGER
|
||||
source "drivers/iio/trigger/Kconfig"
|
||||
endif #IIO_TRIGGER
|
||||
source "drivers/iio/pressure/Kconfig"
|
||||
|
||||
endif # IIO
|
||||
|
|
|
@ -22,3 +22,4 @@ obj-y += imu/
|
|||
obj-y += light/
|
||||
obj-y += magnetometer/
|
||||
obj-y += trigger/
|
||||
obj-y += pressure/
|
||||
|
|
35
drivers/iio/pressure/Kconfig
Normal file
35
drivers/iio/pressure/Kconfig
Normal file
|
@ -0,0 +1,35 @@
|
|||
#
|
||||
# Pressure drivers
|
||||
#
|
||||
menu "Pressure Sensors"
|
||||
|
||||
config IIO_ST_PRESS
|
||||
tristate "STMicroelectronics pressures Driver"
|
||||
depends on (I2C || SPI_MASTER) && SYSFS
|
||||
select IIO_ST_SENSORS_CORE
|
||||
select IIO_ST_PRESS_I2C if (I2C)
|
||||
select IIO_ST_PRESS_SPI if (SPI_MASTER)
|
||||
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
|
||||
help
|
||||
Say yes here to build support for STMicroelectronics pressures:
|
||||
LPS331AP.
|
||||
|
||||
This driver can also be built as a module. If so, will be created
|
||||
these modules:
|
||||
- st_pressure (core functions for the driver [it is mandatory]);
|
||||
- st_pressure_i2c (necessary for the I2C devices [optional*]);
|
||||
- st_pressure_spi (necessary for the SPI devices [optional*]);
|
||||
|
||||
(*) one of these is necessary to do something.
|
||||
|
||||
config IIO_ST_PRESS_I2C
|
||||
tristate
|
||||
depends on IIO_ST_PRESS
|
||||
depends on IIO_ST_SENSORS_I2C
|
||||
|
||||
config IIO_ST_PRESS_SPI
|
||||
tristate
|
||||
depends on IIO_ST_PRESS
|
||||
depends on IIO_ST_SENSORS_SPI
|
||||
|
||||
endmenu
|
10
drivers/iio/pressure/Makefile
Normal file
10
drivers/iio/pressure/Makefile
Normal file
|
@ -0,0 +1,10 @@
|
|||
#
|
||||
# Makefile for industrial I/O pressure drivers
|
||||
#
|
||||
|
||||
obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
|
||||
st_pressure-y := st_pressure_core.o
|
||||
st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
|
||||
|
||||
obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
|
||||
obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
|
39
drivers/iio/pressure/st_pressure.h
Normal file
39
drivers/iio/pressure/st_pressure.h
Normal file
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* STMicroelectronics pressures driver
|
||||
*
|
||||
* Copyright 2013 STMicroelectronics Inc.
|
||||
*
|
||||
* Denis Ciocca <denis.ciocca@st.com>
|
||||
* v. 1.0.0
|
||||
* Licensed under the GPL-2.
|
||||
*/
|
||||
|
||||
#ifndef ST_PRESS_H
|
||||
#define ST_PRESS_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/iio/common/st_sensors.h>
|
||||
|
||||
#define LPS331AP_PRESS_DEV_NAME "lps331ap"
|
||||
|
||||
int st_press_common_probe(struct iio_dev *indio_dev);
|
||||
void st_press_common_remove(struct iio_dev *indio_dev);
|
||||
|
||||
#ifdef CONFIG_IIO_BUFFER
|
||||
int st_press_allocate_ring(struct iio_dev *indio_dev);
|
||||
void st_press_deallocate_ring(struct iio_dev *indio_dev);
|
||||
int st_press_trig_set_state(struct iio_trigger *trig, bool state);
|
||||
#define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state)
|
||||
#else /* CONFIG_IIO_BUFFER */
|
||||
static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
|
||||
{
|
||||
}
|
||||
#define ST_PRESS_TRIGGER_SET_STATE NULL
|
||||
#endif /* CONFIG_IIO_BUFFER */
|
||||
|
||||
#endif /* ST_PRESS_H */
|
105
drivers/iio/pressure/st_pressure_buffer.c
Normal file
105
drivers/iio/pressure/st_pressure_buffer.c
Normal file
|
@ -0,0 +1,105 @@
|
|||
/*
|
||||
* STMicroelectronics pressures driver
|
||||
*
|
||||
* Copyright 2013 STMicroelectronics Inc.
|
||||
*
|
||||
* Denis Ciocca <denis.ciocca@st.com>
|
||||
*
|
||||
* Licensed under the GPL-2.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/stat.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <linux/iio/trigger_consumer.h>
|
||||
#include <linux/iio/triggered_buffer.h>
|
||||
|
||||
#include <linux/iio/common/st_sensors.h>
|
||||
#include "st_pressure.h"
|
||||
|
||||
int st_press_trig_set_state(struct iio_trigger *trig, bool state)
|
||||
{
|
||||
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
||||
|
||||
return st_sensors_set_dataready_irq(indio_dev, state);
|
||||
}
|
||||
|
||||
static int st_press_buffer_preenable(struct iio_dev *indio_dev)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = st_sensors_set_enable(indio_dev, true);
|
||||
if (err < 0)
|
||||
goto st_press_set_enable_error;
|
||||
|
||||
err = iio_sw_buffer_preenable(indio_dev);
|
||||
|
||||
st_press_set_enable_error:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_press_buffer_postenable(struct iio_dev *indio_dev)
|
||||
{
|
||||
int err;
|
||||
struct st_sensor_data *pdata = iio_priv(indio_dev);
|
||||
|
||||
pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
|
||||
if (pdata->buffer_data == NULL) {
|
||||
err = -ENOMEM;
|
||||
goto allocate_memory_error;
|
||||
}
|
||||
|
||||
err = iio_triggered_buffer_postenable(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_buffer_postenable_error;
|
||||
|
||||
return err;
|
||||
|
||||
st_press_buffer_postenable_error:
|
||||
kfree(pdata->buffer_data);
|
||||
allocate_memory_error:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_press_buffer_predisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
int err;
|
||||
struct st_sensor_data *pdata = iio_priv(indio_dev);
|
||||
|
||||
err = iio_triggered_buffer_predisable(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_buffer_predisable_error;
|
||||
|
||||
err = st_sensors_set_enable(indio_dev, false);
|
||||
|
||||
st_press_buffer_predisable_error:
|
||||
kfree(pdata->buffer_data);
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
|
||||
.preenable = &st_press_buffer_preenable,
|
||||
.postenable = &st_press_buffer_postenable,
|
||||
.predisable = &st_press_buffer_predisable,
|
||||
};
|
||||
|
||||
int st_press_allocate_ring(struct iio_dev *indio_dev)
|
||||
{
|
||||
return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
|
||||
&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
|
||||
}
|
||||
|
||||
void st_press_deallocate_ring(struct iio_dev *indio_dev)
|
||||
{
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
||||
MODULE_DESCRIPTION("STMicroelectronics pressures buffer");
|
||||
MODULE_LICENSE("GPL v2");
|
272
drivers/iio/pressure/st_pressure_core.c
Normal file
272
drivers/iio/pressure/st_pressure_core.c
Normal file
|
@ -0,0 +1,272 @@
|
|||
/*
|
||||
* STMicroelectronics pressures driver
|
||||
*
|
||||
* Copyright 2013 STMicroelectronics Inc.
|
||||
*
|
||||
* Denis Ciocca <denis.ciocca@st.com>
|
||||
*
|
||||
* Licensed under the GPL-2.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/iio/trigger.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <asm/unaligned.h>
|
||||
|
||||
#include <linux/iio/common/st_sensors.h>
|
||||
#include "st_pressure.h"
|
||||
|
||||
#define ST_PRESS_MBAR_TO_KPASCAL(x) (x * 10)
|
||||
#define ST_PRESS_NUMBER_DATA_CHANNELS 1
|
||||
|
||||
/* DEFAULT VALUE FOR SENSORS */
|
||||
#define ST_PRESS_DEFAULT_OUT_XL_ADDR 0x28
|
||||
#define ST_TEMP_DEFAULT_OUT_L_ADDR 0x2b
|
||||
|
||||
/* FULLSCALE */
|
||||
#define ST_PRESS_FS_AVL_1260MB 1260
|
||||
|
||||
/* CUSTOM VALUES FOR SENSOR 1 */
|
||||
#define ST_PRESS_1_WAI_EXP 0xbb
|
||||
#define ST_PRESS_1_ODR_ADDR 0x20
|
||||
#define ST_PRESS_1_ODR_MASK 0x70
|
||||
#define ST_PRESS_1_ODR_AVL_1HZ_VAL 0x01
|
||||
#define ST_PRESS_1_ODR_AVL_7HZ_VAL 0x05
|
||||
#define ST_PRESS_1_ODR_AVL_13HZ_VAL 0x06
|
||||
#define ST_PRESS_1_ODR_AVL_25HZ_VAL 0x07
|
||||
#define ST_PRESS_1_PW_ADDR 0x20
|
||||
#define ST_PRESS_1_PW_MASK 0x80
|
||||
#define ST_PRESS_1_FS_ADDR 0x23
|
||||
#define ST_PRESS_1_FS_MASK 0x30
|
||||
#define ST_PRESS_1_FS_AVL_1260_VAL 0x00
|
||||
#define ST_PRESS_1_FS_AVL_1260_GAIN ST_PRESS_MBAR_TO_KPASCAL(244141)
|
||||
#define ST_PRESS_1_FS_AVL_TEMP_GAIN 2083000
|
||||
#define ST_PRESS_1_BDU_ADDR 0x20
|
||||
#define ST_PRESS_1_BDU_MASK 0x04
|
||||
#define ST_PRESS_1_DRDY_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_1_DRDY_IRQ_MASK 0x04
|
||||
#define ST_PRESS_1_MULTIREAD_BIT true
|
||||
#define ST_PRESS_1_TEMP_OFFSET 42500
|
||||
|
||||
static const struct iio_chan_spec st_press_channels[] = {
|
||||
ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
|
||||
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
||||
ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
|
||||
ST_PRESS_DEFAULT_OUT_XL_ADDR),
|
||||
ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
|
||||
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
|
||||
BIT(IIO_CHAN_INFO_OFFSET),
|
||||
-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
|
||||
ST_TEMP_DEFAULT_OUT_L_ADDR),
|
||||
IIO_CHAN_SOFT_TIMESTAMP(1)
|
||||
};
|
||||
|
||||
static const struct st_sensors st_press_sensors[] = {
|
||||
{
|
||||
.wai = ST_PRESS_1_WAI_EXP,
|
||||
.sensors_supported = {
|
||||
[0] = LPS331AP_PRESS_DEV_NAME,
|
||||
},
|
||||
.ch = (struct iio_chan_spec *)st_press_channels,
|
||||
.odr = {
|
||||
.addr = ST_PRESS_1_ODR_ADDR,
|
||||
.mask = ST_PRESS_1_ODR_MASK,
|
||||
.odr_avl = {
|
||||
{ 1, ST_PRESS_1_ODR_AVL_1HZ_VAL, },
|
||||
{ 7, ST_PRESS_1_ODR_AVL_7HZ_VAL, },
|
||||
{ 13, ST_PRESS_1_ODR_AVL_13HZ_VAL, },
|
||||
{ 25, ST_PRESS_1_ODR_AVL_25HZ_VAL, },
|
||||
},
|
||||
},
|
||||
.pw = {
|
||||
.addr = ST_PRESS_1_PW_ADDR,
|
||||
.mask = ST_PRESS_1_PW_MASK,
|
||||
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
||||
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
||||
},
|
||||
.fs = {
|
||||
.addr = ST_PRESS_1_FS_ADDR,
|
||||
.mask = ST_PRESS_1_FS_MASK,
|
||||
.fs_avl = {
|
||||
[0] = {
|
||||
.num = ST_PRESS_FS_AVL_1260MB,
|
||||
.value = ST_PRESS_1_FS_AVL_1260_VAL,
|
||||
.gain = ST_PRESS_1_FS_AVL_1260_GAIN,
|
||||
.gain2 = ST_PRESS_1_FS_AVL_TEMP_GAIN,
|
||||
},
|
||||
},
|
||||
},
|
||||
.bdu = {
|
||||
.addr = ST_PRESS_1_BDU_ADDR,
|
||||
.mask = ST_PRESS_1_BDU_MASK,
|
||||
},
|
||||
.drdy_irq = {
|
||||
.addr = ST_PRESS_1_DRDY_IRQ_ADDR,
|
||||
.mask = ST_PRESS_1_DRDY_IRQ_MASK,
|
||||
},
|
||||
.multi_read_bit = ST_PRESS_1_MULTIREAD_BIT,
|
||||
.bootime = 2,
|
||||
},
|
||||
};
|
||||
|
||||
static int st_press_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *ch, int *val,
|
||||
int *val2, long mask)
|
||||
{
|
||||
int err;
|
||||
struct st_sensor_data *pdata = iio_priv(indio_dev);
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
err = st_sensors_read_info_raw(indio_dev, ch, val);
|
||||
if (err < 0)
|
||||
goto read_error;
|
||||
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 0;
|
||||
|
||||
switch (ch->type) {
|
||||
case IIO_PRESSURE:
|
||||
*val2 = pdata->current_fullscale->gain;
|
||||
break;
|
||||
case IIO_TEMP:
|
||||
*val2 = pdata->current_fullscale->gain2;
|
||||
break;
|
||||
default:
|
||||
err = -EINVAL;
|
||||
goto read_error;
|
||||
}
|
||||
|
||||
return IIO_VAL_INT_PLUS_NANO;
|
||||
case IIO_CHAN_INFO_OFFSET:
|
||||
switch (ch->type) {
|
||||
case IIO_TEMP:
|
||||
*val = 425;
|
||||
*val2 = 10;
|
||||
break;
|
||||
default:
|
||||
err = -EINVAL;
|
||||
goto read_error;
|
||||
}
|
||||
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
read_error:
|
||||
return err;
|
||||
}
|
||||
|
||||
static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
|
||||
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
|
||||
|
||||
static struct attribute *st_press_attributes[] = {
|
||||
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
||||
&iio_dev_attr_sampling_frequency.dev_attr.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group st_press_attribute_group = {
|
||||
.attrs = st_press_attributes,
|
||||
};
|
||||
|
||||
static const struct iio_info press_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.attrs = &st_press_attribute_group,
|
||||
.read_raw = &st_press_read_raw,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_IIO_TRIGGER
|
||||
static const struct iio_trigger_ops st_press_trigger_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
|
||||
};
|
||||
#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
|
||||
#else
|
||||
#define ST_PRESS_TRIGGER_OPS NULL
|
||||
#endif
|
||||
|
||||
int st_press_common_probe(struct iio_dev *indio_dev)
|
||||
{
|
||||
int err;
|
||||
struct st_sensor_data *pdata = iio_priv(indio_dev);
|
||||
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &press_info;
|
||||
|
||||
err = st_sensors_check_device_support(indio_dev,
|
||||
ARRAY_SIZE(st_press_sensors), st_press_sensors);
|
||||
if (err < 0)
|
||||
goto st_press_common_probe_error;
|
||||
|
||||
pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
|
||||
pdata->multiread_bit = pdata->sensor->multi_read_bit;
|
||||
indio_dev->channels = pdata->sensor->ch;
|
||||
indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
|
||||
|
||||
pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
|
||||
&pdata->sensor->fs.fs_avl[0];
|
||||
pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
|
||||
|
||||
err = st_sensors_init_sensor(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_common_probe_error;
|
||||
|
||||
if (pdata->get_irq_data_ready(indio_dev) > 0) {
|
||||
err = st_press_allocate_ring(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_common_probe_error;
|
||||
|
||||
err = st_sensors_allocate_trigger(indio_dev,
|
||||
ST_PRESS_TRIGGER_OPS);
|
||||
if (err < 0)
|
||||
goto st_press_probe_trigger_error;
|
||||
}
|
||||
|
||||
err = iio_device_register(indio_dev);
|
||||
if (err)
|
||||
goto st_press_device_register_error;
|
||||
|
||||
return err;
|
||||
|
||||
st_press_device_register_error:
|
||||
if (pdata->get_irq_data_ready(indio_dev) > 0)
|
||||
st_sensors_deallocate_trigger(indio_dev);
|
||||
st_press_probe_trigger_error:
|
||||
if (pdata->get_irq_data_ready(indio_dev) > 0)
|
||||
st_press_deallocate_ring(indio_dev);
|
||||
st_press_common_probe_error:
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(st_press_common_probe);
|
||||
|
||||
void st_press_common_remove(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct st_sensor_data *pdata = iio_priv(indio_dev);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
if (pdata->get_irq_data_ready(indio_dev) > 0) {
|
||||
st_sensors_deallocate_trigger(indio_dev);
|
||||
st_press_deallocate_ring(indio_dev);
|
||||
}
|
||||
iio_device_free(indio_dev);
|
||||
}
|
||||
EXPORT_SYMBOL(st_press_common_remove);
|
||||
|
||||
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
||||
MODULE_DESCRIPTION("STMicroelectronics pressures driver");
|
||||
MODULE_LICENSE("GPL v2");
|
77
drivers/iio/pressure/st_pressure_i2c.c
Normal file
77
drivers/iio/pressure/st_pressure_i2c.c
Normal file
|
@ -0,0 +1,77 @@
|
|||
/*
|
||||
* STMicroelectronics pressures driver
|
||||
*
|
||||
* Copyright 2013 STMicroelectronics Inc.
|
||||
*
|
||||
* Denis Ciocca <denis.ciocca@st.com>
|
||||
*
|
||||
* Licensed under the GPL-2.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/iio/iio.h>
|
||||
|
||||
#include <linux/iio/common/st_sensors.h>
|
||||
#include <linux/iio/common/st_sensors_i2c.h>
|
||||
#include "st_pressure.h"
|
||||
|
||||
static int st_press_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct st_sensor_data *pdata;
|
||||
int err;
|
||||
|
||||
indio_dev = iio_device_alloc(sizeof(*pdata));
|
||||
if (indio_dev == NULL) {
|
||||
err = -ENOMEM;
|
||||
goto iio_device_alloc_error;
|
||||
}
|
||||
|
||||
pdata = iio_priv(indio_dev);
|
||||
pdata->dev = &client->dev;
|
||||
|
||||
st_sensors_i2c_configure(indio_dev, client, pdata);
|
||||
|
||||
err = st_press_common_probe(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_common_probe_error;
|
||||
|
||||
return 0;
|
||||
|
||||
st_press_common_probe_error:
|
||||
iio_device_free(indio_dev);
|
||||
iio_device_alloc_error:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_press_i2c_remove(struct i2c_client *client)
|
||||
{
|
||||
st_press_common_remove(i2c_get_clientdata(client));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id st_press_id_table[] = {
|
||||
{ LPS331AP_PRESS_DEV_NAME },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, st_press_id_table);
|
||||
|
||||
static struct i2c_driver st_press_driver = {
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "st-press-i2c",
|
||||
},
|
||||
.probe = st_press_i2c_probe,
|
||||
.remove = st_press_i2c_remove,
|
||||
.id_table = st_press_id_table,
|
||||
};
|
||||
module_i2c_driver(st_press_driver);
|
||||
|
||||
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
||||
MODULE_DESCRIPTION("STMicroelectronics pressures i2c driver");
|
||||
MODULE_LICENSE("GPL v2");
|
76
drivers/iio/pressure/st_pressure_spi.c
Normal file
76
drivers/iio/pressure/st_pressure_spi.c
Normal file
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* STMicroelectronics pressures driver
|
||||
*
|
||||
* Copyright 2013 STMicroelectronics Inc.
|
||||
*
|
||||
* Denis Ciocca <denis.ciocca@st.com>
|
||||
*
|
||||
* Licensed under the GPL-2.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/iio/iio.h>
|
||||
|
||||
#include <linux/iio/common/st_sensors.h>
|
||||
#include <linux/iio/common/st_sensors_spi.h>
|
||||
#include "st_pressure.h"
|
||||
|
||||
static int st_press_spi_probe(struct spi_device *spi)
|
||||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct st_sensor_data *pdata;
|
||||
int err;
|
||||
|
||||
indio_dev = iio_device_alloc(sizeof(*pdata));
|
||||
if (indio_dev == NULL) {
|
||||
err = -ENOMEM;
|
||||
goto iio_device_alloc_error;
|
||||
}
|
||||
|
||||
pdata = iio_priv(indio_dev);
|
||||
pdata->dev = &spi->dev;
|
||||
|
||||
st_sensors_spi_configure(indio_dev, spi, pdata);
|
||||
|
||||
err = st_press_common_probe(indio_dev);
|
||||
if (err < 0)
|
||||
goto st_press_common_probe_error;
|
||||
|
||||
return 0;
|
||||
|
||||
st_press_common_probe_error:
|
||||
iio_device_free(indio_dev);
|
||||
iio_device_alloc_error:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_press_spi_remove(struct spi_device *spi)
|
||||
{
|
||||
st_press_common_remove(spi_get_drvdata(spi));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct spi_device_id st_press_id_table[] = {
|
||||
{ LPS331AP_PRESS_DEV_NAME },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(spi, st_press_id_table);
|
||||
|
||||
static struct spi_driver st_press_driver = {
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "st-press-spi",
|
||||
},
|
||||
.probe = st_press_spi_probe,
|
||||
.remove = st_press_spi_remove,
|
||||
.id_table = st_press_id_table,
|
||||
};
|
||||
module_spi_driver(st_press_driver);
|
||||
|
||||
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
||||
MODULE_DESCRIPTION("STMicroelectronics pressures spi driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue