diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
index eb0fa5f4fe88..5377f6317961 100644
--- a/Documentation/extcon/porting-android-switch-class
+++ b/Documentation/extcon/porting-android-switch-class
@@ -25,8 +25,10 @@ MyungJoo Ham <myungjoo.ham@samsung.com>
     @print_state: no change but type change (switch_dev->extcon_dev)
 
 - switch_dev_register(sdev, dev)
-	=> extcon_dev_register(edev, dev)
-	: no change but type change (sdev->edev)
+	=> extcon_dev_register(edev)
+	: type change (sdev->edev)
+	: remove second param('dev'). if edev has parent device, should store
+	  'dev' to 'edev.dev.parent' before registering extcon device
 - switch_dev_unregister(sdev)
 	=> extcon_dev_unregister(edev)
 	: no change but type change (sdev->edev)
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 5985807e52c9..e23f1c2e5053 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -27,16 +27,16 @@
 
 /**
  * struct adc_jack_data - internal data for adc_jack device driver
- * @edev        - extcon device.
- * @cable_names - list of supported cables.
- * @num_cables  - size of cable_names.
- * @adc_conditions       - list of adc value conditions.
- * @num_conditions       - size of adc_conditions.
- * @irq         - irq number of attach/detach event (0 if not exist).
- * @handling_delay      - interrupt handler will schedule extcon event
- *                      handling at handling_delay jiffies.
- * @handler     - extcon event handler called by interrupt handler.
- * @chan       - iio channel being queried.
+ * @edev:		extcon device.
+ * @cable_names:	list of supported cables.
+ * @num_cables:		size of cable_names.
+ * @adc_conditions:	list of adc value conditions.
+ * @num_conditions:	size of adc_conditions.
+ * @irq:		irq number of attach/detach event (0 if not exist).
+ * @handling_delay:	interrupt handler will schedule extcon event
+ *			handling at handling_delay jiffies.
+ * @handler:		extcon event handler called by interrupt handler.
+ * @chan:		iio channel being queried.
  */
 struct adc_jack_data {
 	struct extcon_dev edev;
@@ -64,7 +64,7 @@ static void adc_jack_handler(struct work_struct *work)
 
 	ret = iio_read_channel_raw(data->chan, &adc_val);
 	if (ret < 0) {
-		dev_err(data->edev.dev, "read channel() error: %d\n", ret);
+		dev_err(&data->edev.dev, "read channel() error: %d\n", ret);
 		return;
 	}
 
@@ -95,7 +95,7 @@ static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
 static int adc_jack_probe(struct platform_device *pdev)
 {
 	struct adc_jack_data *data;
-	struct adc_jack_pdata *pdata = pdev->dev.platform_data;
+	struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int i, err = 0;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -110,6 +110,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	data->edev.dev.parent = &pdev->dev;
 	data->edev.supported_cable = pdata->cable_names;
 
 	/* Check the length of array and set num_cables */
@@ -148,7 +149,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	err = extcon_dev_register(&data->edev, &pdev->dev);
+	err = extcon_dev_register(&data->edev);
 	if (err)
 		goto out;
 
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 91a702beccc5..3c55ec856e39 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -86,8 +86,8 @@ struct arizona_extcon_info {
 };
 
 static const struct arizona_micd_config micd_default_modes[] = {
-	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
-	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
+	{ ARIZONA_ACCDET_SRC, 1, 0 },
+	{ 0,                  2, 1 },
 };
 
 static const struct arizona_micd_range micd_default_ranges[] = {
@@ -182,7 +182,8 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 					info->micd_modes[mode].gpio);
 	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
 			   ARIZONA_MICD_BIAS_SRC_MASK,
-			   info->micd_modes[mode].bias);
+			   info->micd_modes[mode].bias <<
+			   ARIZONA_MICD_BIAS_SRC_SHIFT);
 	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
 			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
 
@@ -193,7 +194,7 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
 
 static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
 {
-	switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) {
+	switch (info->micd_modes[0].bias) {
 	case 1:
 		return "MICBIAS1";
 	case 2:
@@ -388,7 +389,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
 
 		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
-		    (val < 100 || val > 0x3fb)) {
+		    (val < 100 || val >= 0x3fb)) {
 			range++;
 			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
 				range);
@@ -401,7 +402,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 		}
 
 		/* If we go out of range report top of range */
-		if (val < 100 || val > 0x3fb) {
+		if (val < 100 || val >= 0x3fb) {
 			dev_dbg(arizona->dev, "Measurement out of range\n");
 			return ARIZONA_HPDET_MAX;
 		}
@@ -514,7 +515,7 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
 		}
 
 		/*
-		 * If we measure the mic as 
+		 * If we measure the mic as high impedance
 		 */
 		if (!id_gpio || info->hpdet_res[1] > 50) {
 			dev_dbg(arizona->dev, "Detected mic\n");
@@ -1042,6 +1043,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 	else
 		info->micd_timeout = DEFAULT_MICD_TIMEOUT;
 
+out:
 	/* Clear trig_sts to make sure DCVDD is not forced up */
 	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
 		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
@@ -1049,7 +1051,6 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		     ARIZONA_JD1_FALL_TRIG_STS |
 		     ARIZONA_JD1_RISE_TRIG_STS);
 
-out:
 	mutex_unlock(&info->lock);
 
 	pm_runtime_mark_last_busy(info->dev);
@@ -1132,9 +1133,10 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	}
 
 	info->edev.name = "Headset Jack";
+	info->edev.dev.parent = arizona->dev;
 	info->edev.supported_cable = arizona_cable;
 
-	ret = extcon_dev_register(&info->edev, arizona->dev);
+	ret = extcon_dev_register(&info->edev);
 	if (ret < 0) {
 		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
 			ret);
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index b6a3d379fe9a..15443d3b6be1 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -74,7 +74,7 @@ static DEFINE_MUTEX(extcon_dev_list_lock);
 
 /**
  * check_mutually_exclusive - Check if new_state violates mutually_exclusive
- *			    condition.
+ *			      condition.
  * @edev:	the extcon device
  * @new_state:	new cable attach status for @edev
  *
@@ -105,7 +105,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
 	int i, count = 0;
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	if (edev->print_state) {
 		int ret = edev->print_state(edev, buf);
@@ -134,7 +134,7 @@ static ssize_t state_store(struct device *dev, struct device_attribute *attr,
 {
 	u32 state;
 	ssize_t ret = 0;
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	ret = sscanf(buf, "0x%x", &state);
 	if (ret == 0)
@@ -152,7 +152,7 @@ static DEVICE_ATTR_RW(state);
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
-	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+	struct extcon_dev *edev = dev_get_drvdata(dev);
 
 	/* Optional callback given by the user */
 	if (edev->print_name) {
@@ -161,7 +161,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 			return ret;
 	}
 
-	return sprintf(buf, "%s\n", dev_name(edev->dev));
+	return sprintf(buf, "%s\n", dev_name(&edev->dev));
 }
 static DEVICE_ATTR_RO(name);
 
@@ -188,7 +188,7 @@ static ssize_t cable_state_show(struct device *dev,
 
 /**
  * extcon_update_state() - Update the cable attach states of the extcon device
- *			only for the masked bits.
+ *			   only for the masked bits.
  * @edev:	the extcon device
  * @mask:	the bit mask to designate updated bits.
  * @state:	new cable attach status for @edev
@@ -226,11 +226,10 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 		edev->state |= state & mask;
 
 		raw_notifier_call_chain(&edev->nh, old_state, edev);
-
 		/* This could be in interrupt handler */
 		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
 		if (prop_buf) {
-			length = name_show(edev->dev, NULL, prop_buf);
+			length = name_show(&edev->dev, NULL, prop_buf);
 			if (length > 0) {
 				if (prop_buf[length - 1] == '\n')
 					prop_buf[length - 1] = 0;
@@ -238,7 +237,7 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 					"NAME=%s", prop_buf);
 				envp[env_offset++] = name_buf;
 			}
-			length = state_show(edev->dev, NULL, prop_buf);
+			length = state_show(&edev->dev, NULL, prop_buf);
 			if (length > 0) {
 				if (prop_buf[length - 1] == '\n')
 					prop_buf[length - 1] = 0;
@@ -250,14 +249,14 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 			/* Unlock early before uevent */
 			spin_unlock_irqrestore(&edev->lock, flags);
 
-			kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
+			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
 			free_page((unsigned long)prop_buf);
 		} else {
 			/* Unlock early before uevent */
 			spin_unlock_irqrestore(&edev->lock, flags);
 
-			dev_err(edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
+			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
 		}
 	} else {
 		/* No changes */
@@ -338,8 +337,9 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state);
 
 /**
  * extcon_set_cable_state_() - Set the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ * @edev:		the extcon device that has the cable.
+ * @index:		cable index that can be retrieved by
+ *			extcon_find_cable_index().
  * @cable_state:	the new cable status. The default semantics is
  *			true: attached / false: detached.
  */
@@ -358,8 +358,8 @@ EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
 
 /**
  * extcon_set_cable_state() - Set the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @cable_name:	cable name.
+ * @edev:		the extcon device that has the cable.
+ * @cable_name:		cable name.
  * @cable_state:	the new cable status. The default semantics is
  *			true: attached / false: detached.
  *
@@ -418,14 +418,14 @@ static int _call_per_cable(struct notifier_block *nb, unsigned long val,
 
 /**
  * extcon_register_interest() - Register a notifier for a state change of a
- *			      specific cable, not an entier set of cables of a
- *			      extcon device.
- * @obj:	an empty extcon_specific_cable_nb object to be returned.
+ *				specific cable, not an entier set of cables of a
+ *				extcon device.
+ * @obj:		an empty extcon_specific_cable_nb object to be returned.
  * @extcon_name:	the name of extcon device.
  *			if NULL, extcon_register_interest will register
  *			every cable with the target cable_name given.
  * @cable_name:		the target cable name.
- * @nb:		the notifier block to get notified.
+ * @nb:			the notifier block to get notified.
  *
  * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
  * the struct for you.
@@ -471,7 +471,7 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
 			return -ENODEV;
 		class_dev_iter_init(&iter, extcon_class, NULL, NULL);
 		while ((dev = class_dev_iter_next(&iter))) {
-			extd = (struct extcon_dev *)dev_get_drvdata(dev);
+			extd = dev_get_drvdata(dev);
 
 			if (extcon_find_cable_index(extd, cable_name) < 0)
 				continue;
@@ -488,7 +488,7 @@ EXPORT_SYMBOL_GPL(extcon_register_interest);
 
 /**
  * extcon_unregister_interest() - Unregister the notifier registered by
- *				extcon_register_interest().
+ *				  extcon_register_interest().
  * @obj:	the extcon_specific_cable_nb object returned by
  *		extcon_register_interest().
  */
@@ -503,7 +503,7 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest);
 
 /**
  * extcon_register_notifier() - Register a notifiee to get notified by
- *			      any attach status changes from the extcon.
+ *				any attach status changes from the extcon.
  * @edev:	the extcon device.
  * @nb:		a notifier block to be registered.
  *
@@ -557,7 +557,6 @@ static int create_extcon_class(void)
 
 static void extcon_dev_release(struct device *dev)
 {
-	kfree(dev);
 }
 
 static const char *muex_name = "mutually_exclusive";
@@ -568,14 +567,13 @@ static void dummy_sysfs_dev_release(struct device *dev)
 /**
  * extcon_dev_register() - Register a new extcon device
  * @edev	: the new extcon device (should be allocated before calling)
- * @dev		: the parent device for this extcon device.
  *
  * Among the members of edev struct, please set the "user initializing data"
  * in any case and set the "optional callbacks" if required. However, please
  * do not set the values of "internal data", which are initialized by
  * this function.
  */
-int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
+int extcon_dev_register(struct extcon_dev *edev)
 {
 	int ret, index = 0;
 
@@ -595,19 +593,20 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 	}
 
 	if (index > SUPPORTED_CABLE_MAX) {
-		dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
 		return -EINVAL;
 	}
 
-	edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (!edev->dev)
-		return -ENOMEM;
-	edev->dev->parent = dev;
-	edev->dev->class = extcon_class;
-	edev->dev->release = extcon_dev_release;
+	edev->dev.class = extcon_class;
+	edev->dev.release = extcon_dev_release;
 
-	edev->name = edev->name ? edev->name : dev_name(dev);
-	dev_set_name(edev->dev, "%s", edev->name);
+	edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
+	if (IS_ERR_OR_NULL(edev->name)) {
+		dev_err(&edev->dev,
+			"extcon device name is null\n");
+		return -EINVAL;
+	}
+	dev_set_name(&edev->dev, "%s", edev->name);
 
 	if (edev->max_supported) {
 		char buf[10];
@@ -715,7 +714,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 			goto err_alloc_groups;
 		}
 
-		edev->extcon_dev_type.name = dev_name(edev->dev);
+		edev->extcon_dev_type.name = dev_name(&edev->dev);
 		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
 
 		for (index = 0; index < edev->max_supported; index++)
@@ -725,25 +724,24 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 			edev->extcon_dev_type.groups[index] =
 				&edev->attr_g_muex;
 
-		edev->dev->type = &edev->extcon_dev_type;
+		edev->dev.type = &edev->extcon_dev_type;
 	}
 
-	ret = device_register(edev->dev);
+	ret = device_register(&edev->dev);
 	if (ret) {
-		put_device(edev->dev);
+		put_device(&edev->dev);
 		goto err_dev;
 	}
 #if defined(CONFIG_ANDROID)
 	if (switch_class)
-		ret = class_compat_create_link(switch_class, edev->dev,
-					       NULL);
+		ret = class_compat_create_link(switch_class, &edev->dev, NULL);
 #endif /* CONFIG_ANDROID */
 
 	spin_lock_init(&edev->lock);
 
 	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
 
-	dev_set_drvdata(edev->dev, edev);
+	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
 
 	mutex_lock(&extcon_dev_list_lock);
@@ -769,7 +767,6 @@ err_alloc_cables:
 	if (edev->max_supported)
 		kfree(edev->cables);
 err_sysfs_alloc:
-	kfree(edev->dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(extcon_dev_register);
@@ -789,9 +786,9 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 	list_del(&edev->entry);
 	mutex_unlock(&extcon_dev_list_lock);
 
-	if (IS_ERR_OR_NULL(get_device(edev->dev))) {
-		dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n",
-				dev_name(edev->dev));
+	if (IS_ERR_OR_NULL(get_device(&edev->dev))) {
+		dev_err(&edev->dev, "Failed to unregister extcon_dev (%s)\n",
+				dev_name(&edev->dev));
 		return;
 	}
 
@@ -813,10 +810,10 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 
 #if defined(CONFIG_ANDROID)
 	if (switch_class)
-		class_compat_remove_link(switch_class, edev->dev, NULL);
+		class_compat_remove_link(switch_class, &edev->dev, NULL);
 #endif
-	device_unregister(edev->dev);
-	put_device(edev->dev);
+	device_unregister(&edev->dev);
+	put_device(&edev->dev);
 }
 EXPORT_SYMBOL_GPL(extcon_dev_unregister);
 
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index f874c30ddbff..7e0dff58e494 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -34,6 +34,7 @@
 struct gpio_extcon_data {
 	struct extcon_dev edev;
 	unsigned gpio;
+	bool gpio_active_low;
 	const char *state_on;
 	const char *state_off;
 	int irq;
@@ -49,6 +50,8 @@ static void gpio_extcon_work(struct work_struct *work)
 			     work);
 
 	state = gpio_get_value(data->gpio);
+	if (data->gpio_active_low)
+		state = !state;
 	extcon_set_state(&data->edev, state);
 }
 
@@ -78,9 +81,9 @@ static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
 
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_extcon_data *extcon_data;
-	int ret = 0;
+	int ret;
 
 	if (!pdata)
 		return -EBUSY;
@@ -95,14 +98,22 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	extcon_data->edev.name = pdata->name;
+	extcon_data->edev.dev.parent = &pdev->dev;
 	extcon_data->gpio = pdata->gpio;
+	extcon_data->gpio_active_low = pdata->gpio_active_low;
 	extcon_data->state_on = pdata->state_on;
 	extcon_data->state_off = pdata->state_off;
 	if (pdata->state_on && pdata->state_off)
 		extcon_data->edev.print_state = extcon_gpio_print_state;
-	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+	if (pdata->debounce) {
+		ret = gpio_set_debounce(extcon_data->gpio,
+					pdata->debounce * 1000);
+		if (ret < 0)
+			extcon_data->debounce_jiffies =
+				msecs_to_jiffies(pdata->debounce);
+	}
 
-	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
+	ret = extcon_dev_register(&extcon_data->edev);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 5ee0344f734d..da268fbc901b 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -965,7 +965,7 @@ static void max77693_muic_irq_work(struct work_struct *work)
 
 	mutex_lock(&info->mutex);
 
-	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 		if (info->irq == muic_irqs[i].virq)
 			irq_type = muic_irqs[i].irq;
 
@@ -1183,8 +1183,9 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
+	info->edev->dev.parent = &pdev->dev;
 	info->edev->supported_cable = max77693_extcon_cable;
-	ret = extcon_dev_register(info->edev, NULL);
+	ret = extcon_dev_register(info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		goto err_irq;
@@ -1200,7 +1201,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		num_init_data = ARRAY_SIZE(default_init_data);
 	}
 
-	for (i = 0 ; i < num_init_data ; i++) {
+	for (i = 0; i < num_init_data; i++) {
 		enum max77693_irq_source irq_src
 				= MAX77693_IRQ_GROUP_NR;
 
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index b9e726daefca..6a00464658c5 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -539,7 +539,7 @@ static void max8997_muic_irq_work(struct work_struct *work)
 
 	mutex_lock(&info->mutex);
 
-	for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++)
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
 		if (info->irq == muic_irqs[i].virq)
 			irq_type = muic_irqs[i].irq;
 
@@ -707,8 +707,9 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
+	info->edev->dev.parent = &pdev->dev;
 	info->edev->supported_cable = max8997_extcon_cable;
-	ret = extcon_dev_register(info->edev, NULL);
+	ret = extcon_dev_register(info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		goto err_irq;
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 89fdd05c5fd6..6c91976dd823 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -135,7 +135,7 @@ static void palmas_enable_irq(struct palmas_usb *palmas_usb)
 static int palmas_usb_probe(struct platform_device *pdev)
 {
 	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
-	struct palmas_usb_platform_data	*pdata = pdev->dev.platform_data;
+	struct palmas_usb_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct device_node *node = pdev->dev.of_node;
 	struct palmas_usb *palmas_usb;
 	int status;
@@ -178,9 +178,10 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, palmas_usb);
 
 	palmas_usb->edev.supported_cable = palmas_extcon_cable;
+	palmas_usb->edev.dev.parent = palmas_usb->dev;
 	palmas_usb->edev.mutually_exclusive = mutually_exclusive;
 
-	status = extcon_dev_register(&palmas_usb->edev, palmas_usb->dev);
+	status = extcon_dev_register(&palmas_usb->edev);
 	if (status) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
 		return status;
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index fcb51c88319f..21c59af1150b 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -51,10 +51,10 @@
 enum extcon_cable_name {
 	EXTCON_USB = 0,
 	EXTCON_USB_HOST,
-	EXTCON_TA, /* Travel Adaptor */
+	EXTCON_TA,			/* Travel Adaptor */
 	EXTCON_FAST_CHARGER,
 	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
+	EXTCON_CHARGE_DOWNSTREAM,	/* Charging an external device */
 	EXTCON_HDMI,
 	EXTCON_MHL,
 	EXTCON_DVI,
@@ -76,8 +76,8 @@ struct extcon_cable;
 
 /**
  * struct extcon_dev - An extcon device represents one external connector.
- * @name:	The name of this extcon device. Parent device name is used
- *		if NULL.
+ * @name:		The name of this extcon device. Parent device name is
+ *			used if NULL.
  * @supported_cable:	Array of supported cable names ending with NULL.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
@@ -89,21 +89,21 @@ struct extcon_cable;
  *			be attached simulataneously. {0x7, 0} is equivalent to
  *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
  *			can be no simultaneous connections.
- * @print_name:	An optional callback to override the method to print the
- *		name of the extcon device.
+ * @print_name:		An optional callback to override the method to print the
+ *			name of the extcon device.
  * @print_state:	An optional callback to override the method to print the
- *		status of the extcon device.
- * @dev:	Device of this extcon. Do not provide at register-time.
- * @state:	Attach/detach state of this extcon. Do not provide at
- *		register-time
- * @nh:	Notifier for the state change events from this extcon
- * @entry:	To support list of extcon devices so that users can search
- *		for extcon devices based on the extcon name.
+ *			status of the extcon device.
+ * @dev:		Device of this extcon.
+ * @state:		Attach/detach state of this extcon. Do not provide at
+ *			register-time.
+ * @nh:			Notifier for the state change events from this extcon
+ * @entry:		To support list of extcon devices so that users can search
+ *			for extcon devices based on the extcon name.
  * @lock:
  * @max_supported:	Internal value to store the number of cables.
  * @extcon_dev_type:	Device_type struct to provide attribute_groups
  *			customized for each extcon device.
- * @cables:	Sysfs subdirectories. Each represents one cable.
+ * @cables:		Sysfs subdirectories. Each represents one cable.
  *
  * In most cases, users only need to provide "User initializing data" of
  * this struct when registering an extcon. In some exceptional cases,
@@ -111,26 +111,27 @@ struct extcon_cable;
  * are overwritten by register function.
  */
 struct extcon_dev {
-	/* --- Optional user initializing data --- */
-	const char	*name;
+	/* Optional user initializing data */
+	const char *name;
 	const char **supported_cable;
-	const u32	*mutually_exclusive;
+	const u32 *mutually_exclusive;
 
-	/* --- Optional callbacks to override class functions --- */
+	/* Optional callbacks to override class functions */
 	ssize_t	(*print_name)(struct extcon_dev *edev, char *buf);
 	ssize_t	(*print_state)(struct extcon_dev *edev, char *buf);
 
-	/* --- Internal data. Please do not set. --- */
-	struct device	*dev;
-	u32		state;
+	/* Internal data. Please do not set. */
+	struct device dev;
 	struct raw_notifier_head nh;
 	struct list_head entry;
-	spinlock_t lock; /* could be called by irq handler */
 	int max_supported;
+	spinlock_t lock;	/* could be called by irq handler */
+	u32 state;
 
 	/* /sys/class/extcon/.../cable.n/... */
 	struct device_type extcon_dev_type;
 	struct extcon_cable *cables;
+
 	/* /sys/class/extcon/.../mutually_exclusive/... */
 	struct attribute_group attr_g_muex;
 	struct attribute **attrs_muex;
@@ -138,13 +139,13 @@ struct extcon_dev {
 };
 
 /**
- * struct extcon_cable	- An internal data for each cable of extcon device.
- * @edev:	The extcon device
+ * struct extcon_cable - An internal data for each cable of extcon device.
+ * @edev:		The extcon device
  * @cable_index:	Index of this cable in the edev
- * @attr_g:	Attribute group for the cable
- * @attr_name:	"name" sysfs entry
- * @attr_state:	"state" sysfs entry
- * @attrs:	Array pointing to attr_name and attr_state for attr_g
+ * @attr_g:		Attribute group for the cable
+ * @attr_name:		"name" sysfs entry
+ * @attr_state:		"state" sysfs entry
+ * @attrs:		Array pointing to attr_name and attr_state for attr_g
  */
 struct extcon_cable {
 	struct extcon_dev *edev;
@@ -159,11 +160,13 @@ struct extcon_cable {
 
 /**
  * struct extcon_specific_cable_nb - An internal data for
- *				extcon_register_interest().
- * @internal_nb:	a notifier block bridging extcon notifier and cable notifier.
- * @user_nb:	user provided notifier block for events from a specific cable.
+ *				     extcon_register_interest().
+ * @internal_nb:	A notifier block bridging extcon notifier
+ *			and cable notifier.
+ * @user_nb:		user provided notifier block for events from
+ *			a specific cable.
  * @cable_index:	the target cable.
- * @edev:	the target extcon device.
+ * @edev:		the target extcon device.
  * @previous_value:	the saved previous event value.
  */
 struct extcon_specific_cable_nb {
@@ -180,7 +183,7 @@ struct extcon_specific_cable_nb {
  * Following APIs are for notifiers or configurations.
  * Notifiers are the external port and connection devices.
  */
-extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev);
+extern int extcon_dev_register(struct extcon_dev *edev);
 extern void extcon_dev_unregister(struct extcon_dev *edev);
 extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
 
@@ -238,8 +241,7 @@ extern int extcon_register_notifier(struct extcon_dev *edev,
 extern int extcon_unregister_notifier(struct extcon_dev *edev,
 				      struct notifier_block *nb);
 #else /* CONFIG_EXTCON */
-static inline int extcon_dev_register(struct extcon_dev *edev,
-				      struct device *dev)
+static inline int extcon_dev_register(struct extcon_dev *edev)
 {
 	return 0;
 }
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 20e9eef25d4c..9ca958c4e94c 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,10 +20,10 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state      - the corresponding extcon state (if 0, this struct denotes
- *             the last adc_jack_cond element among the array)
- * @min_adc    - min adc value for this condition
- * @max_adc    - max adc value for this condition
+ * @state:		the corresponding extcon state (if 0, this struct
+ *			denotes the last adc_jack_cond element among the array)
+ * @min_adc:		min adc value for this condition
+ * @max_adc:		max adc value for this condition
  *
  * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
  * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
@@ -33,34 +33,34 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state; /* extcon state value. 0 if invalid */
+	u32 state;	/* extcon state value. 0 if invalid */
 	u32 min_adc;
 	u32 max_adc;
 };
 
 /**
  * struct adc_jack_pdata - platform data for adc jack device.
- * @name       - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- *                   side. This typically describes the channels used within
- *                   the consumer. E.g. 'battery_voltage'
- * @cable_names        - array of cable names ending with null.
- * @adc_contitions     - array of struct adc_jack_cond conditions ending
- *                     with .state = 0 entry. This describes how to decode
- *                     adc values into extcon state.
- * @irq_flags  - irq flags used for the @irq
- * @handling_delay_ms  - in some devices, we need to read ADC value some
- *                     milli-seconds after the interrupt occurs. You may
- *                     describe such delays with @handling_delay_ms, which
- *                     is rounded-off by jiffies.
+ * @name:		name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel:	Unique name to identify the channel on the consumer
+ *			side. This typically describes the channels used within
+ *			the consumer. E.g. 'battery_voltage'
+ * @cable_names:	array of cable names ending with null.
+ * @adc_contitions:	array of struct adc_jack_cond conditions ending
+ *			with .state = 0 entry. This describes how to decode
+ *			adc values into extcon state.
+ * @irq_flags:		irq flags used for the @irq
+ * @handling_delay_ms:	in some devices, we need to read ADC value some
+ *			milli-seconds after the interrupt occurs. You may
+ *			describe such delays with @handling_delay_ms, which
+ *			is rounded-off by jiffies.
  */
 struct adc_jack_pdata {
 	const char *name;
 	const char *consumer_channel;
-	/*
-	 * The last entry should be NULL
-	 */
+
+	/* The last entry should be NULL */
 	const char **cable_names;
+
 	/* The last entry's state should be 0 */
 	struct adc_jack_cond *adc_conditions;
 
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 2d8307f7d67d..4195810f87fe 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -25,14 +25,17 @@
 
 /**
  * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name	The name of this GPIO extcon device.
- * @gpio	Corresponding GPIO.
- * @debounce	Debounce time for GPIO IRQ in ms.
- * @irq_flags	IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on	print_state is overriden with state_on if attached. If Null,
- *		default method of extcon class is used.
- * @state_off	print_state is overriden with state_on if detached. If Null,
- *		default method of extcon class is used.
+ * @name:		The name of this GPIO extcon device.
+ * @gpio:		Corresponding GPIO.
+ * @gpio_active_low:	Boolean describing whether gpio active state is 1 or 0
+ *			If true, low state of gpio means active.
+ *			If false, high state of gpio means active.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on:		print_state is overriden with state_on if attached.
+ *			If NULL, default method of extcon class is used.
+ * @state_off:		print_state is overriden with state_on if detached.
+ *			If NUll, default method of extcon class is used.
  *
  * Note that in order for state_on or state_off to be valid, both state_on
  * and state_off should be not NULL. If at least one of them is NULL,
@@ -41,6 +44,7 @@
 struct gpio_extcon_platform_data {
 	const char *name;
 	unsigned gpio;
+	bool gpio_active_low;
 	unsigned long debounce;
 	unsigned long irq_flags;