From 25eb650a690b95cb0e2cf0c3b03f4900a59e0135 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Mon, 13 Jun 2011 17:53:53 +0800 Subject: [PATCH] doc: fix wrong arch/i386 references Change all "arch/i386" to "arch/x86" in Documentaion/, since the directory has changed. Also update the files which have changed their filename in the meantime accordingly. Signed-off-by: Wanlong Gao [jkosina@suse.cz: reword changelog] Signed-off-by: Jiri Kosina --- Documentation/RCU/NMI-RCU.txt | 4 +-- Documentation/blockdev/README.DAC960 | 2 +- Documentation/blockdev/ramdisk.txt | 8 ++--- Documentation/cpu-freq/cpu-drivers.txt | 2 +- Documentation/filesystems/nfs/nfsroot.txt | 2 +- Documentation/isdn/README.HiSax | 2 +- Documentation/kbuild/makefiles.txt | 38 +++++++++++------------ Documentation/magic-number.txt | 2 +- Documentation/mca.txt | 4 +-- Documentation/scheduler/sched-arch.txt | 2 +- Documentation/scsi/BusLogic.txt | 2 +- Documentation/serial/computone.txt | 2 +- Documentation/zh_CN/magic-number.txt | 2 +- 13 files changed, 36 insertions(+), 36 deletions(-) diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index a8536cb88091..bf82851a0e57 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -5,8 +5,8 @@ Although RCU is usually used to protect read-mostly data structures, it is possible to use RCU to provide dynamic non-maskable interrupt handlers, as well as dynamic irq handlers. This document describes how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer -work in "arch/i386/oprofile/nmi_timer_int.c" and in -"arch/i386/kernel/traps.c". +work in "arch/x86/oprofile/nmi_timer_int.c" and in +"arch/x86/kernel/traps.c". The relevant pieces of code are listed below, each followed by a brief explanation. diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 index 0e8f618ab534..bd85fb9dc6e5 100644 --- a/Documentation/blockdev/README.DAC960 +++ b/Documentation/blockdev/README.DAC960 @@ -214,7 +214,7 @@ replacing "/usr/src" with wherever you keep your Linux kernel source tree: make config make bzImage (or zImage) -Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your +Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your standard kernel, run lilo if appropriate, and reboot. To create the necessary devices in /dev, the "make_rd" script included in diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt index 6c820baa19a6..fa72e97dd669 100644 --- a/Documentation/blockdev/ramdisk.txt +++ b/Documentation/blockdev/ramdisk.txt @@ -64,9 +64,9 @@ the RAM disk dynamically grows as data is being written into it, a size field is not required. Bits 11 to 13 are not currently used and may as well be zero. These numbers are no magical secrets, as seen below: -./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF -./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 -./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 +./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF +./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 +./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 Consider a typical two floppy disk setup, where you will have the kernel on disk one, and have already put a RAM disk image onto disk #2. @@ -85,7 +85,7 @@ The command line equivalent is: "prompt_ramdisk=1" Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. So to create disk one of the set, you would do: - /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 + /usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0 /usr/src/linux# rdev /dev/fd0 /dev/fd0 /usr/src/linux# rdev -r /dev/fd0 49152 diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 6c30e930c122..c436096351f8 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -168,7 +168,7 @@ in-chipset dynamic frequency switching to policy->min, the upper limit to policy->max, and -if supported- select a performance-oriented setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check -the reference implementation in arch/i386/kernel/cpu/cpufreq/longrun.c +the reference implementation in drivers/cpufreq/longrun.c diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt index 90c71c6f0d00..ffdd9d866ad7 100644 --- a/Documentation/filesystems/nfs/nfsroot.txt +++ b/Documentation/filesystems/nfs/nfsroot.txt @@ -226,7 +226,7 @@ They depend on various facilities being available: cdrecord. e.g. - cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso + cdrecord dev=ATAPI:1,0,0 arch/x86/boot/image.iso For more information on isolinux, including how to create bootdisks for prebuilt kernels, see http://syslinux.zytor.com/ diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax index 99e87a61897d..b1a573cf4472 100644 --- a/Documentation/isdn/README.HiSax +++ b/Documentation/isdn/README.HiSax @@ -506,7 +506,7 @@ to e.g. the Internet: make clean; make zImage; make modules; make modules_install 2. Install the new kernel - cp /usr/src/linux/arch/i386/boot/zImage /etc/kernel/linux.isdn + cp /usr/src/linux/arch/x86/boot/zImage /etc/kernel/linux.isdn vi /etc/lilo.conf lilo diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 47435e56c5da..f47cdefb4d1e 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -441,7 +441,7 @@ more details, with real examples. specified if first option are not supported. Example: - #arch/i386/kernel/Makefile + #arch/x86/kernel/Makefile vsyscall-flags += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) In the above example, vsyscall-flags will be assigned the option @@ -460,7 +460,7 @@ more details, with real examples. supported to use an optional second option. Example: - #arch/i386/Makefile + #arch/x86/Makefile cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) In the above example, cflags-y will be assigned the option @@ -522,7 +522,7 @@ more details, with real examples. even though the option was accepted by gcc. Example: - #arch/i386/Makefile + #arch/x86/Makefile cflags-y += $(shell \ if [ $(call cc-version) -ge 0300 ] ; then \ echo "-mregparm=3"; fi ;) @@ -802,7 +802,7 @@ but in the architecture makefiles where the kbuild infrastructure is not sufficient this sometimes needs to be explicit. Example: - #arch/i386/boot/Makefile + #arch/x86/boot/Makefile subdir- := compressed/ The above assignment instructs kbuild to descend down in the @@ -812,12 +812,12 @@ To support the clean infrastructure in the Makefiles that builds the final bootimage there is an optional target named archclean: Example: - #arch/i386/Makefile + #arch/x86/Makefile archclean: - $(Q)$(MAKE) $(clean)=arch/i386/boot + $(Q)$(MAKE) $(clean)=arch/x86/boot -When "make clean" is executed, make will descend down in arch/i386/boot, -and clean as usual. The Makefile located in arch/i386/boot/ may use +When "make clean" is executed, make will descend down in arch/x86/boot, +and clean as usual. The Makefile located in arch/x86/boot/ may use the subdir- trick to descend further down. Note 1: arch/$(ARCH)/Makefile cannot use "subdir-", because that file is @@ -882,7 +882,7 @@ When kbuild executes, the following steps are followed (roughly): LDFLAGS_vmlinux uses the LDFLAGS_$@ support. Example: - #arch/i386/Makefile + #arch/x86/Makefile LDFLAGS_vmlinux := -e stext OBJCOPYFLAGS objcopy flags @@ -920,14 +920,14 @@ When kbuild executes, the following steps are followed (roughly): Often, the KBUILD_CFLAGS variable depends on the configuration. Example: - #arch/i386/Makefile + #arch/x86/Makefile cflags-$(CONFIG_M386) += -march=i386 KBUILD_CFLAGS += $(cflags-y) Many arch Makefiles dynamically run the target C compiler to probe supported options: - #arch/i386/Makefile + #arch/x86/Makefile ... cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\ @@ -1038,8 +1038,8 @@ When kbuild executes, the following steps are followed (roughly): into the arch/$(ARCH)/boot/Makefile. Example: - #arch/i386/Makefile - boot := arch/i386/boot + #arch/x86/Makefile + boot := arch/x86/boot bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ @@ -1051,7 +1051,7 @@ When kbuild executes, the following steps are followed (roughly): To support this, $(archhelp) must be defined. Example: - #arch/i386/Makefile + #arch/x86/Makefile define archhelp echo '* bzImage - Image (arch/$(ARCH)/boot/bzImage)' endif @@ -1065,7 +1065,7 @@ When kbuild executes, the following steps are followed (roughly): from vmlinux. Example: - #arch/i386/Makefile + #arch/x86/Makefile all: bzImage When "make" is executed without arguments, bzImage will be built. @@ -1083,7 +1083,7 @@ When kbuild executes, the following steps are followed (roughly): 2) kbuild knows what files to delete during "make clean" Example: - #arch/i386/kernel/Makefile + #arch/x86/kernel/Makefile extra-y := head.o init_task.o In this example, extra-y is used to list object files that @@ -1133,7 +1133,7 @@ When kbuild executes, the following steps are followed (roughly): Compress target. Use maximum compression to compress target. Example: - #arch/i386/boot/Makefile + #arch/x86/boot/Makefile LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext @@ -1193,7 +1193,7 @@ When kbuild executes, the following steps are followed (roughly): When updating the $(obj)/bzImage target, the line - BUILD arch/i386/boot/bzImage + BUILD arch/x86/boot/bzImage will be displayed with "make KBUILD_VERBOSE=0". @@ -1207,7 +1207,7 @@ When kbuild executes, the following steps are followed (roughly): kbuild knows .lds files and includes a rule *lds.S -> *lds. Example: - #arch/i386/kernel/Makefile + #arch/x86/kernel/Makefile always := vmlinux.lds #Makefile diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index 4b12abcb2ad3..abf481f780ec 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -66,7 +66,7 @@ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c -APM_BIOS_MAGIC 0x4101 apm_user arch/i386/kernel/apm.c +APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h DB_MAGIC 0x4442 fc_info drivers/net/iph5526_novram.c DL_MAGIC 0x444d fc_info drivers/net/iph5526_novram.c diff --git a/Documentation/mca.txt b/Documentation/mca.txt index 510375d4209a..dfd130c2207d 100644 --- a/Documentation/mca.txt +++ b/Documentation/mca.txt @@ -11,7 +11,7 @@ Adapter Detection The ideal MCA adapter detection is done through the use of the Programmable Option Select registers. Generic functions for doing -this have been added in include/linux/mca.h and arch/i386/kernel/mca.c. +this have been added in include/linux/mca.h and arch/x86/kernel/mca_32.c. Everything needed to detect adapters and read (and write) configuration information is there. A number of MCA-specific drivers already use this. The typical probe code looks like the following: @@ -81,7 +81,7 @@ more people use shared IRQs on PCI machines. In general, an interrupt must be acknowledged not only at the ICU (which is done automagically by the kernel), but at the device level. In particular, IRQ 0 must be reset after a timer interrupt (now done in -arch/i386/kernel/time.c) or the first timer interrupt hangs the system. +arch/x86/kernel/time.c) or the first timer interrupt hangs the system. There were also problems with the 1.3.x floppy drivers, but that seems to have been fixed. diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt index d43dbcbd163b..28aa1075e291 100644 --- a/Documentation/scheduler/sched-arch.txt +++ b/Documentation/scheduler/sched-arch.txt @@ -66,7 +66,7 @@ Your cpu_idle routines need to obey the following rules: barrier issued (followed by a test of need_resched with interrupts disabled, as explained in 3). -arch/i386/kernel/process.c has examples of both polling and +arch/x86/kernel/process.c has examples of both polling and sleeping idle functions. diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt index d7fbc9488b98..48e982cd6fe7 100644 --- a/Documentation/scsi/BusLogic.txt +++ b/Documentation/scsi/BusLogic.txt @@ -553,7 +553,7 @@ replacing "/usr/src" with wherever you keep your Linux kernel source tree: make config make zImage -Then install "arch/i386/boot/zImage" as your standard kernel, run lilo if +Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if appropriate, and reboot. diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt index c57ea4781e5d..60a6f657c37d 100644 --- a/Documentation/serial/computone.txt +++ b/Documentation/serial/computone.txt @@ -87,7 +87,7 @@ c) Set address on ISA cards then: edit /usr/src/linux/drivers/char/ip2.c (Optional - may be specified on kernel command line now) d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. +e) mv /usr/src/linux/arch/x86/boot/zImage to /boot. f) Add new config for this kernel into /etc/lilo.conf, run "lilo" or copy to a floppy disk and boot from that floppy disk. g) Reboot using this kernel diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt index 4c4ce853577b..c278f412dc65 100644 --- a/Documentation/zh_CN/magic-number.txt +++ b/Documentation/zh_CN/magic-number.txt @@ -66,7 +66,7 @@ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c -APM_BIOS_MAGIC 0x4101 apm_user arch/i386/kernel/apm.c +APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h DB_MAGIC 0x4442 fc_info drivers/net/iph5526_novram.c DL_MAGIC 0x444d fc_info drivers/net/iph5526_novram.c