mfd: Add power off functionality to TWL

TWL family of PMICs, used in master mode, have a power off
functionality. The resulting power off sequence shuts down all the SoC
supplies, LDOs, etc. The sequence is described in the datasheets
chapter "Power-Off Sequence".
Note, that board must be wired correctly for the power off to work as
expected.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Igor Grinberg 2011-11-13 11:49:50 +02:00 committed by Samuel Ortiz
parent aeb5032b3f
commit 26cc3ab984
2 changed files with 42 additions and 2 deletions

View file

@ -34,7 +34,8 @@
static u8 twl4030_start_script_address = 0x2b;
#define PWR_P1_SW_EVENTS 0x10
#define PWR_DEVOFF (1<<0)
#define PWR_DEVOFF (1 << 0)
#define SEQ_OFFSYNC (1 << 0)
#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
@ -511,12 +512,27 @@ int twl4030_remove_script(u8 flags)
return err;
}
/*
* In master mode, start the power off sequence.
* After a successful execution, TWL shuts down the power to the SoC
* and all peripherals connected to it.
*/
void twl4030_power_off(void)
{
int err;
err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, PWR_DEVOFF,
TWL4030_PM_MASTER_P1_SW_EVENTS);
if (err)
pr_err("TWL4030 Unable to power off\n");
}
void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
{
int err = 0;
int i;
struct twl4030_resconfig *resconfig;
u8 address = twl4030_start_script_address;
u8 val, address = twl4030_start_script_address;
err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
TWL4030_PM_MASTER_KEY_CFG1,
@ -548,6 +564,28 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
}
}
/* Board has to be wired properly to use this feature */
if (twl4030_scripts->use_poweroff && !pm_power_off) {
/* Default for SEQ_OFFSYNC is set, lets ensure this */
err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val,
TWL4030_PM_MASTER_CFG_P123_TRANSITION);
if (err) {
pr_warning("TWL4030 Unable to read registers\n");
} else if (!(val & SEQ_OFFSYNC)) {
val |= SEQ_OFFSYNC;
err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val,
TWL4030_PM_MASTER_CFG_P123_TRANSITION);
if (err) {
pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n");
goto relock;
}
}
pm_power_off = twl4030_power_off;
}
relock:
err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
TWL4030_PM_MASTER_PROTECT_KEY);
if (err)

View file

@ -652,10 +652,12 @@ struct twl4030_power_data {
unsigned num;
struct twl4030_resconfig *resource_config;
#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
bool use_poweroff; /* Board is wired for TWL poweroff */
};
extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
extern int twl4030_remove_script(u8 flags);
extern void twl4030_power_off(void);
struct twl4030_codec_data {
unsigned int digimic_delay; /* in ms */