diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 26696b693e63..17a1eb14847a 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -169,6 +169,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = { #ifdef CONFIG_ARM64 { "APMC0D0F", APD_ADDR(xgene_i2c_desc) }, { "BRCM900D", APD_ADDR(vulcan_spi_desc) }, + { "CAV900D", APD_ADDR(vulcan_spi_desc) }, #endif { } }; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 25ae7f2e44b5..1761c9004fc1 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -715,7 +715,7 @@ config SPI_XILINX config SPI_XLP tristate "Netlogic XLP SPI controller driver" - depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST + depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST help Enable support for the SPI controller on the Netlogic XLP SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index ad76a44fee6f..c24d9b45a27c 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -33,6 +33,7 @@ #include #include #include +#include #include @@ -57,6 +58,8 @@ struct ti_qspi { struct ti_qspi_regs ctx_reg; dma_addr_t mmap_phys_base; + dma_addr_t rx_bb_dma_addr; + void *rx_bb_addr; struct dma_chan *rx_chan; u32 spi_max_frequency; @@ -126,6 +129,8 @@ struct ti_qspi { #define QSPI_SETUP_ADDR_SHIFT 8 #define QSPI_SETUP_DUMMY_SHIFT 10 +#define QSPI_DMA_BUFFER_SIZE SZ_64K + static inline unsigned long ti_qspi_read(struct ti_qspi *qspi, unsigned long reg) { @@ -395,14 +400,12 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, dma_addr_t dma_src, size_t len) { struct dma_chan *chan = qspi->rx_chan; - struct dma_device *dma_dev = chan->device; dma_cookie_t cookie; enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; struct dma_async_tx_descriptor *tx; int ret; - tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src, - len, flags); + tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags); if (!tx) { dev_err(qspi->dev, "device_prep_dma_memcpy error\n"); return -EIO; @@ -431,6 +434,35 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, return 0; } +static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, + struct spi_flash_read_message *msg) +{ + size_t readsize = msg->len; + void *to = msg->buf; + dma_addr_t dma_src = qspi->mmap_phys_base + msg->from; + int ret = 0; + + /* + * Use bounce buffer as FS like jffs2, ubifs may pass + * buffers that does not belong to kernel lowmem region. + */ + while (readsize != 0) { + size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE, + readsize); + + ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr, + dma_src, xfer_len); + if (ret != 0) + return ret; + memcpy(to, qspi->rx_bb_addr, xfer_len); + readsize -= xfer_len; + dma_src += xfer_len; + to += xfer_len; + } + + return ret; +} + static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg, loff_t from) { @@ -498,6 +530,12 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, QSPI_SPI_SETUP_REG(spi->chip_select)); } +static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi, + struct spi_flash_read_message *msg) +{ + return virt_addr_valid(msg->buf); +} + static int ti_qspi_spi_flash_read(struct spi_device *spi, struct spi_flash_read_message *msg) { @@ -511,15 +549,12 @@ static int ti_qspi_spi_flash_read(struct spi_device *spi, ti_qspi_setup_mmap_read(spi, msg); if (qspi->rx_chan) { - if (msg->cur_msg_mapped) { + if (msg->cur_msg_mapped) ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from); - if (ret) - goto err_unlock; - } else { - dev_err(qspi->dev, "Invalid address for DMA\n"); - ret = -EIO; + else + ret = ti_qspi_dma_bounce_buffer(qspi, msg); + if (ret) goto err_unlock; - } } else { memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len); } @@ -725,6 +760,17 @@ static int ti_qspi_probe(struct platform_device *pdev) ret = 0; goto no_dma; } + qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev, + QSPI_DMA_BUFFER_SIZE, + &qspi->rx_bb_dma_addr, + GFP_KERNEL | GFP_DMA); + if (!qspi->rx_bb_addr) { + dev_err(qspi->dev, + "dma_alloc_coherent failed, using PIO mode\n"); + dma_release_channel(qspi->rx_chan); + goto no_dma; + } + master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma; master->dma_rx = qspi->rx_chan; init_completion(&qspi->transfer_complete); if (res_mmap) @@ -765,6 +811,10 @@ static int ti_qspi_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); + if (qspi->rx_bb_addr) + dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE, + qspi->rx_bb_addr, + qspi->rx_bb_dma_addr); if (qspi->rx_chan) dma_release_channel(qspi->rx_chan); diff --git a/drivers/spi/spi-xlp.c b/drivers/spi/spi-xlp.c index bea7a93a6046..80cb4d6af892 100644 --- a/drivers/spi/spi-xlp.c +++ b/drivers/spi/spi-xlp.c @@ -442,6 +442,7 @@ static int xlp_spi_probe(struct platform_device *pdev) #ifdef CONFIG_ACPI static const struct acpi_device_id xlp_spi_acpi_match[] = { { "BRCM900D", 0 }, + { "CAV900D", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, xlp_spi_acpi_match); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2c36c0ac708a..89254a55eb2e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2854,7 +2854,7 @@ int spi_flash_read(struct spi_device *spi, mutex_lock(&master->bus_lock_mutex); mutex_lock(&master->io_mutex); - if (master->dma_rx) { + if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) { rx_dev = master->dma_rx->device->dev; ret = spi_map_buf(master, rx_dev, &msg->rx_sg, msg->buf, msg->len, diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 805878d61a8f..935bd2854ff1 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -376,6 +376,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_message: undo any work done by prepare_message(). * @spi_flash_read: to support spi-controller hardwares that provide * accelerated interface to read from flash devices. + * @spi_flash_can_dma: analogous to can_dma() interface, but for + * controllers implementing spi_flash_read. * @flash_read_supported: spi device supports flash read * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that @@ -539,6 +541,8 @@ struct spi_master { struct spi_message *message); int (*spi_flash_read)(struct spi_device *spi, struct spi_flash_read_message *msg); + bool (*spi_flash_can_dma)(struct spi_device *spi, + struct spi_flash_read_message *msg); bool (*flash_read_supported)(struct spi_device *spi); /*