From 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 12 May 2005 20:09:17 -0400 Subject: [PATCH 01/42] [PATCH] r8169: incoming frame length check The size of the incoming frame is not correctly checked. The RxMaxSize register (0xDA) does not work as expected and incoming frames whose size exceeds the MTU actually end spanning multiple descriptors. The first Rx descriptor contains the size of the whole frame (or some garbage in its place). The driver does not expect something above the space allocated to the current skb and crashes loudly when it issues a skb_put. The fix contains two parts: - disable hardware Rx size filtering: so far it only proved to be able to trigger some new fancy errors; - drop multi-descriptors frame: as the driver allocates MTU sized Rx buffers, it provides an adequate filtering. As a bonus, wrong descriptors were not returned to the asic after their processing. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76b..b3768d844747 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, while (rx_left > 0) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", + dev->name, status); tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + goto move_on; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - +move_on: cur_rx++; rx_left--; } From b9a6eaffe7ff3d3481efa9fa353b2c6a02eda756 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 10 Apr 2005 20:27:45 +0200 Subject: [PATCH 02/42] [PATCH] 3c574_cs: disable interrupts in el3_close 3c574_cs forgets to disable interrupts during el3_close(). fix it by doing what 3c59x does. Signed-off-by: Daniel Ritz --- drivers/net/pcmcia/3c574_cs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41e517114807..c6e8b25f9685 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) spin_lock_irqsave(&lp->window_lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); } link->open--; From 07dd39b9f62e0532c6922459c3a26d54a07bc231 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 30 May 2005 13:15:52 -0400 Subject: [PATCH 03/42] libata: minor DocBook update --- Documentation/DocBook/libata.tmpl | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index cf2fce7707da..773ae9fd99dc 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -44,11 +44,26 @@ + + Introduction + + libATA is a library used inside the Linux kernel to support ATA host + controllers and devices. libATA provides an ATA driver API, class + transports for ATA and ATAPI devices, and SCSI<->ATA translation + for ATA devices according to the T10 SAT specification. + + + This Guide documents the libATA driver API, library functions, library + internals, and a couple sample ATA low-level drivers. + + + Thanks The bulk of the ATA knowledge comes thanks to long conversations with - Andre Hedrick (www.linux-ide.org). + Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA + and SCSI specifications. Thanks to Alan Cox for pointing out similarities From 780a87f71841932db8dbb0f1eb9daf3a973a6bd6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 30 May 2005 15:41:05 -0400 Subject: [PATCH 04/42] libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c. --- Documentation/DocBook/libata.tmpl | 60 ++++++++++++++++++++----------- drivers/scsi/libata-core.c | 57 ++++++++++++++++++++++------- 2 files changed, 84 insertions(+), 33 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 773ae9fd99dc..41053aed41f4 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -14,7 +14,7 @@ - 2003 + 2003-2005 Jeff Garzik @@ -145,14 +145,25 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); -u8 (*check_status)(struct ata_port *ap); -void (*dev_select)(struct ata_port *ap, unsigned int device); +int (*check_atapi_dma) (struct ata_queued_cmd *qc); - Reads the Status ATA shadow register from hardware. On some - hardware, this has the side effect of clearing the interrupt - condition. +Allow low-level driver to filter ATA PACKET commands, returning a status +indicating whether or not it is OK to use DMA for the supplied PACKET +command. + + + +u8 (*check_status)(struct ata_port *ap); +u8 (*check_altstatus)(struct ata_port *ap); +u8 (*check_err)(struct ata_port *ap); + + + + Reads the Status/AltStatus/Error ATA shadow register from + hardware. On some hardware, reading the Status register has + the side effect of clearing the interrupt condition. @@ -162,7 +173,8 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Issues the low-level hardware command(s) that causes one of N hardware devices to be considered 'selected' (active and - available for use) on the ATA bus. + available for use) on the ATA bus. This generally has no +meaning on FIS-based devices. @@ -180,12 +192,20 @@ void (*phy_reset) (struct ata_port *ap); void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); +void (*bmdma_stop) (struct ata_port *ap); +u8 (*bmdma_status) (struct ata_port *ap); - When setting up an IDE BMDMA transaction, these hooks arm - (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA - engine. +When setting up an IDE BMDMA transaction, these hooks arm +(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop) +the hardware's DMA engine. ->bmdma_status is used to read the standard +PCI IDE DMA Status register. + + + +These hooks are typically either no-ops, or simply not implemented, in +FIS-based drivers. @@ -205,9 +225,7 @@ int (*qc_issue) (struct ata_queued_cmd *qc); ->qc_issue is used to make a command active, once the hardware and S/G tables have been prepared. IDE BMDMA drivers use the helper function ata_qc_issue_prot() for taskfile protocol-based - dispatch. More advanced drivers roll their own ->qc_issue - implementation, using this as the "issue new ATA command to - hardware" hook. + dispatch. More advanced drivers implement their own ->qc_issue. @@ -215,8 +233,10 @@ void (*eng_timeout) (struct ata_port *ap); - This is a high level error handling function, called from the - error handling thread, when a command times out. +This is a high level error handling function, called from the +error handling thread, when a command times out. Most newer +hardware will implement its own error handling code here. IDE BMDMA +drivers may use the helper function ata_eng_timeout(). @@ -255,15 +275,15 @@ void (*host_stop) (struct ata_host_set *host_set); tasks. - ->host_stop() is called when the rmmod or hot unplug process - begins. The hook must stop all hardware interrupts, DMA - engines, etc. - - ->port_stop() is called after ->host_stop(). It's sole function is to release DMA/memory resources, now that they are no longer actively being used. + + ->host_stop() is called after all ->port_stop() calls +have completed. The hook must finalize hardware shutdown, release DMA +and other resources, etc. + diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 63d3f70d06e1..4d707d06a5d1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1241,10 +1241,14 @@ void ata_port_probe(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. * - * LOCKING: + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ void __sata_phy_reset(struct ata_port *ap) @@ -1289,10 +1293,13 @@ void __sata_phy_reset(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. * - * LOCKING: + * This function resets the SATA bus, and then probes + * the bus for devices. + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ void sata_phy_reset(struct ata_port *ap) @@ -1304,10 +1311,16 @@ void sata_phy_reset(struct ata_port *ap) } /** - * ata_port_disable - - * @ap: + * ata_port_disable - Disable port. + * @ap: Port to be disabled. * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_disable(struct ata_port *ap) @@ -1416,7 +1429,9 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * - * LOCKING: + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ static void ata_set_mode(struct ata_port *ap) @@ -1467,7 +1482,10 @@ err_out: * @tmout_pat: impatience timeout * @tmout: overall timeout * - * LOCKING: + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. * */ @@ -1556,7 +1574,7 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) * ata_bus_edd - * @ap: * - * LOCKING: + * LOCKING: None. Serialized during ata_bus_probe(). * */ @@ -1909,7 +1927,10 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * @ap: Port associated with device @dev * @dev: Device to which command will be sent * - * LOCKING: + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * + * LOCKING: None. Serialized during ata_bus_probe(). */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1981,7 +2002,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -2028,6 +2053,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * * LOCKING: * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise @@ -2046,6 +2075,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * + * Prepare ATA taskfile for submission. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ From 0cba632b737fc2de76934137b8dccf92d9fa4d19 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 30 May 2005 19:49:12 -0400 Subject: [PATCH 05/42] libata: doc updates --- Documentation/DocBook/libata.tmpl | 40 ++++---- drivers/scsi/ata_piix.c | 16 ---- drivers/scsi/libata-core.c | 150 +++++++++++++++++++++++------- drivers/scsi/libata-scsi.c | 2 +- 4 files changed, 138 insertions(+), 70 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 41053aed41f4..77b4a223a86c 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -58,26 +58,6 @@ - - Thanks - - The bulk of the ATA knowledge comes thanks to long conversations with - Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA - and SCSI specifications. - - - Thanks to Alan Cox for pointing out similarities - between SATA and SCSI, and in general for motivation to hack on - libata. - - - libata's device detection - method, ata_pio_devchk, and in general all the early probing was - based on extensive study of Hale Landis's probe/reset code in his - ATADRVR driver (www.ata-atapi.com). - - - libata Driver API @@ -314,4 +294,24 @@ and other resources, etc. !Idrivers/scsi/sata_sil.c + + Thanks + + The bulk of the ATA knowledge comes thanks to long conversations with + Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA + and SCSI specifications. + + + Thanks to Alan Cox for pointing out similarities + between SATA and SCSI, and in general for motivation to hack on + libata. + + + libata's device detection + method, ata_pio_devchk, and in general all the early probing was + based on extensive study of Hale Landis's probe/reset code in his + ATADRVR driver (www.ata-atapi.com). + + + diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 3867f91ef8c7..c2b00c9d40a8 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -663,15 +663,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, port_info, n_ports); } -/** - * piix_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init piix_init(void) { int rc; @@ -687,13 +678,6 @@ static int __init piix_init(void) return 0; } -/** - * piix_exit - - * - * LOCKING: - * - */ - static void __exit piix_exit(void) { pci_unregister_driver(&piix_pci_driver); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4d707d06a5d1..31b2984f379a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1190,7 +1190,12 @@ err_out: * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, non-zero on error. @@ -1229,10 +1234,14 @@ err_out: } /** - * ata_port_probe - - * @ap: + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_probe(struct ata_port *ap) @@ -1248,7 +1257,8 @@ void ata_port_probe(struct ata_port *ap) * PHY registers, to wake up the phy (and device), and * clear any reset condition. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ void __sata_phy_reset(struct ata_port *ap) @@ -1299,7 +1309,8 @@ void __sata_phy_reset(struct ata_port *ap) * This function resets the SATA bus, and then probes * the bus for devices. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ void sata_phy_reset(struct ata_port *ap) @@ -1431,7 +1442,8 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ static void ata_set_mode(struct ata_port *ap) @@ -1571,10 +1583,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) } /** - * ata_bus_edd - - * @ap: + * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. + * @ap: Port to reset and probe * - * LOCKING: None. Serialized during ata_bus_probe(). + * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and + * probe the bus. Not often used these days. + * + * LOCKING: + * PCI/etc. bus probe sem. * */ @@ -1651,8 +1667,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the device is ATA or ATAPI. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * PCI/etc. bus probe sem. + * Obtains host_set lock. * * SIDE EFFECTS: * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. @@ -1894,7 +1910,11 @@ static int fgb(u32 bitmap) * @xfer_mode_out: (output) SET FEATURES - XFER MODE code * @xfer_shift_out: (output) bit shift that selects this mode * + * Based on host and device capabilities, determine the + * maximum transfer mode that is amenable to all. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, negative on error. @@ -1930,7 +1950,8 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * Issue SET FEATURES - XFER MODE command to device @dev * on port @ap. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1968,10 +1989,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_sg_clean - - * @qc: + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. * * LOCKING: + * spin_lock_irqsave(host_set lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -2058,6 +2082,8 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * supplied PACKET command. * * LOCKING: + * spin_lock_irqsave(host_set lock) + * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ @@ -2088,6 +2114,19 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2105,6 +2144,20 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) sg->length = buflen; } +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2114,14 +2167,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } /** - * ata_sg_setup_one - - * @qc: + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: - * + * Zero on success, negative on error. */ static int ata_sg_setup_one(struct ata_queued_cmd *qc) @@ -2146,13 +2201,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } /** - * ata_sg_setup - - * @qc: + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: + * Zero on success, negative on error. * */ @@ -2182,6 +2240,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * @ap: * * LOCKING: + * None. (executing in kernel thread context) * * RETURNS: * @@ -2229,6 +2288,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_complete (struct ata_port *ap) @@ -2446,6 +2506,7 @@ err_out: * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_block(struct ata_port *ap) @@ -2614,6 +2675,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, * transaction completed successfully. * * LOCKING: + * Inherited from SCSI layer (none, can sleep) */ static void ata_qc_timeout(struct ata_queued_cmd *qc) @@ -2723,6 +2785,7 @@ out: * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) @@ -2748,6 +2811,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, @@ -2812,6 +2876,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * in case something prevents using it. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ void ata_qc_free(struct ata_queued_cmd *qc) @@ -2825,9 +2890,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @drv_stat: ATA status register contents + * @drv_stat: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ @@ -3234,13 +3303,18 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line - * @dev_instance: pointer to our host information structure + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure * @regs: unused * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * * LOCKING: + * Obtains host_set lock during operation. * * RETURNS: + * IRQ_NONE or IRQ_HANDLED. * */ @@ -3381,7 +3455,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * * LOCKING: + * Inherited from caller. * */ @@ -3436,9 +3514,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host * + * Attach low-level ATA driver to system. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * New ata_port on success, for NULL on error. * */ @@ -3471,12 +3553,22 @@ err_out: } /** - * ata_device_add - - * @ent: + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * Number of ports registered. Zero on error (no ports registered). * */ @@ -3755,6 +3847,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * Inherited from PCI layer (may sleep). * * RETURNS: + * Zero on success, negative on errno-based value on error. * */ @@ -3974,15 +4067,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) #endif /* CONFIG_PCI */ -/** - * ata_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init ata_init(void) { ata_wq = create_workqueue("ata"); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 416ba67ba9ee..7a4adc4c8f09 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -947,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_noop - + * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. From 92bab26be5544d8b495389646490fcfdca6dbcf2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 31 May 2005 20:43:57 -0400 Subject: [PATCH 06/42] libata: more docs updates --- Documentation/DocBook/libata.tmpl | 57 +++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 77b4a223a86c..6df1dfd18b65 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -60,9 +60,22 @@ libata Driver API + + struct ata_port_operations is defined for every low-level libata + hardware driver, and it controls how the low-level driver + interfaces with the ATA and SCSI layers. + + + FIS-based drivers will hook into the system with ->qc_prep() and + ->qc_issue() high-level hooks. Hardware which behaves in a manner + similar to PCI IDE hardware may utilize several generic helpers, + defining at a bare minimum the bus I/O addresses of the ATA shadow + register blocks. + struct ata_port_operations + Disable ATA port void (*port_disable) (struct ata_port *); @@ -73,6 +86,9 @@ void (*port_disable) (struct ata_port *); unplug). + + + Post-IDENTIFY device configuration void (*dev_config) (struct ata_port *, struct ata_device *); @@ -83,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. + + + Set PIO/DMA mode void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); @@ -103,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap); ->set_dma_mode() is only called if DMA is possible. + + + Taskfile read/write void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); @@ -115,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); taskfile register values. + + + ATA command execute void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); @@ -124,6 +149,9 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); ->tf_load(), to be initiated in hardware. + + + Per-cmd ATAPI DMA capabilities filter int (*check_atapi_dma) (struct ata_queued_cmd *qc); @@ -134,6 +162,9 @@ indicating whether or not it is OK to use DMA for the supplied PACKET command. + + + Read specific ATA shadow registers u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); @@ -146,6 +177,9 @@ u8 (*check_err)(struct ata_port *ap); the side effect of clearing the interrupt condition. + + + Select ATA device on bus void (*dev_select)(struct ata_port *ap, unsigned int device); @@ -157,6 +191,9 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); meaning on FIS-based devices. + + + Reset ATA bus void (*phy_reset) (struct ata_port *ap); @@ -169,6 +206,9 @@ void (*phy_reset) (struct ata_port *ap); functions ata_bus_reset() or sata_phy_reset() for this hook. + + + Control PCI IDE BMDMA engine void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); @@ -188,6 +228,9 @@ These hooks are typically either no-ops, or simply not implemented, in FIS-based drivers. + + + High-level taskfile hooks void (*qc_prep) (struct ata_queued_cmd *qc); int (*qc_issue) (struct ata_queued_cmd *qc); @@ -208,6 +251,9 @@ int (*qc_issue) (struct ata_queued_cmd *qc); dispatch. More advanced drivers implement their own ->qc_issue. + + + Timeout (error) handling void (*eng_timeout) (struct ata_port *ap); @@ -219,6 +265,9 @@ hardware will implement its own error handling code here. IDE BMDMA drivers may use the helper function ata_eng_timeout(). + + + Hardware interrupt handling irqreturn_t (*irq_handler)(int, void *, struct pt_regs *); void (*irq_clear) (struct ata_port *); @@ -231,6 +280,9 @@ void (*irq_clear) (struct ata_port *); is quiet. + + + SATA phy read/write u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg); void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, @@ -242,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, if ->phy_reset hook called the sata_phy_reset() helper function. + + + Init and shutdown int (*port_start) (struct ata_port *ap); void (*port_stop) (struct ata_port *ap); @@ -265,6 +320,8 @@ have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. + + From 64a6c7aa3836e357499d2e822388f30c11f13604 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 2 Jun 2005 13:02:25 -0700 Subject: [PATCH 07/42] [IPVS]: remove net/ipv4/ipvs/ip_vs_proto_icmp.c ip_vs_proto_icmp.c was never finished. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- net/ipv4/ipvs/Makefile | 2 +- net/ipv4/ipvs/ip_vs_proto.c | 3 - net/ipv4/ipvs/ip_vs_proto_icmp.c | 182 ------------------------------- 3 files changed, 1 insertion(+), 186 deletions(-) delete mode 100644 net/ipv4/ipvs/ip_vs_proto_icmp.c diff --git a/net/ipv4/ipvs/Makefile b/net/ipv4/ipvs/Makefile index a788461a40c9..30e85de9ffff 100644 --- a/net/ipv4/ipvs/Makefile +++ b/net/ipv4/ipvs/Makefile @@ -11,7 +11,7 @@ ip_vs_proto-objs-$(CONFIG_IP_VS_PROTO_AH) += ip_vs_proto_ah.o ip_vs-objs := ip_vs_conn.o ip_vs_core.o ip_vs_ctl.o ip_vs_sched.o \ ip_vs_xmit.o ip_vs_app.o ip_vs_sync.o \ - ip_vs_est.o ip_vs_proto.o ip_vs_proto_icmp.o \ + ip_vs_est.o ip_vs_proto.o \ $(ip_vs_proto-objs-y) diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c index 253c46252bd5..867d4e9c6594 100644 --- a/net/ipv4/ipvs/ip_vs_proto.c +++ b/net/ipv4/ipvs/ip_vs_proto.c @@ -216,9 +216,6 @@ int ip_vs_protocol_init(void) #ifdef CONFIG_IP_VS_PROTO_UDP REGISTER_PROTOCOL(&ip_vs_protocol_udp); #endif -#ifdef CONFIG_IP_VS_PROTO_ICMP - REGISTER_PROTOCOL(&ip_vs_protocol_icmp); -#endif #ifdef CONFIG_IP_VS_PROTO_AH REGISTER_PROTOCOL(&ip_vs_protocol_ah); #endif diff --git a/net/ipv4/ipvs/ip_vs_proto_icmp.c b/net/ipv4/ipvs/ip_vs_proto_icmp.c deleted file mode 100644 index 191e94aa1c1f..000000000000 --- a/net/ipv4/ipvs/ip_vs_proto_icmp.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * ip_vs_proto_icmp.c: ICMP load balancing support for IP Virtual Server - * - * Authors: Julian Anastasov , March 2002 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation; - * - */ - -#include -#include -#include -#include -#include - -#include - - -static int icmp_timeouts[1] = { 1*60*HZ }; - -static char * icmp_state_name_table[1] = { "ICMP" }; - -static struct ip_vs_conn * -icmp_conn_in_get(const struct sk_buff *skb, - struct ip_vs_protocol *pp, - const struct iphdr *iph, - unsigned int proto_off, - int inverse) -{ -#if 0 - struct ip_vs_conn *cp; - - if (likely(!inverse)) { - cp = ip_vs_conn_in_get(iph->protocol, - iph->saddr, 0, - iph->daddr, 0); - } else { - cp = ip_vs_conn_in_get(iph->protocol, - iph->daddr, 0, - iph->saddr, 0); - } - - return cp; - -#else - return NULL; -#endif -} - -static struct ip_vs_conn * -icmp_conn_out_get(const struct sk_buff *skb, - struct ip_vs_protocol *pp, - const struct iphdr *iph, - unsigned int proto_off, - int inverse) -{ -#if 0 - struct ip_vs_conn *cp; - - if (likely(!inverse)) { - cp = ip_vs_conn_out_get(iph->protocol, - iph->saddr, 0, - iph->daddr, 0); - } else { - cp = ip_vs_conn_out_get(IPPROTO_UDP, - iph->daddr, 0, - iph->saddr, 0); - } - - return cp; -#else - return NULL; -#endif -} - -static int -icmp_conn_schedule(struct sk_buff *skb, struct ip_vs_protocol *pp, - int *verdict, struct ip_vs_conn **cpp) -{ - *verdict = NF_ACCEPT; - return 0; -} - -static int -icmp_csum_check(struct sk_buff *skb, struct ip_vs_protocol *pp) -{ - if (!(skb->nh.iph->frag_off & __constant_htons(IP_OFFSET))) { - if (skb->ip_summed != CHECKSUM_UNNECESSARY) { - if (ip_vs_checksum_complete(skb, skb->nh.iph->ihl * 4)) { - IP_VS_DBG_RL_PKT(0, pp, skb, 0, "Failed checksum for"); - return 0; - } - } - } - return 1; -} - -static void -icmp_debug_packet(struct ip_vs_protocol *pp, - const struct sk_buff *skb, - int offset, - const char *msg) -{ - char buf[256]; - struct iphdr _iph, *ih; - - ih = skb_header_pointer(skb, offset, sizeof(_iph), &_iph); - if (ih == NULL) - sprintf(buf, "%s TRUNCATED", pp->name); - else if (ih->frag_off & __constant_htons(IP_OFFSET)) - sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u frag", - pp->name, NIPQUAD(ih->saddr), - NIPQUAD(ih->daddr)); - else { - struct icmphdr _icmph, *ic; - - ic = skb_header_pointer(skb, offset + ih->ihl*4, - sizeof(_icmph), &_icmph); - if (ic == NULL) - sprintf(buf, "%s TRUNCATED to %u bytes\n", - pp->name, skb->len - offset); - else - sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u T:%d C:%d", - pp->name, NIPQUAD(ih->saddr), - NIPQUAD(ih->daddr), - ic->type, ic->code); - } - printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf); -} - -static int -icmp_state_transition(struct ip_vs_conn *cp, int direction, - const struct sk_buff *skb, - struct ip_vs_protocol *pp) -{ - cp->timeout = pp->timeout_table[IP_VS_ICMP_S_NORMAL]; - return 1; -} - -static int -icmp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to) -{ - int num; - char **names; - - num = IP_VS_ICMP_S_LAST; - names = icmp_state_name_table; - return ip_vs_set_state_timeout(pp->timeout_table, num, names, sname, to); -} - - -static void icmp_init(struct ip_vs_protocol *pp) -{ - pp->timeout_table = icmp_timeouts; -} - -static void icmp_exit(struct ip_vs_protocol *pp) -{ -} - -struct ip_vs_protocol ip_vs_protocol_icmp = { - .name = "ICMP", - .protocol = IPPROTO_ICMP, - .dont_defrag = 0, - .init = icmp_init, - .exit = icmp_exit, - .conn_schedule = icmp_conn_schedule, - .conn_in_get = icmp_conn_in_get, - .conn_out_get = icmp_conn_out_get, - .snat_handler = NULL, - .dnat_handler = NULL, - .csum_check = icmp_csum_check, - .state_transition = icmp_state_transition, - .register_app = NULL, - .unregister_app = NULL, - .app_conn_bind = NULL, - .debug_packet = icmp_debug_packet, - .timeout_change = NULL, - .set_state_timeout = icmp_set_state_timeout, -}; From 3087e1ff8d64da7b6b527e89d0c0864ab36294b8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 2 Jun 2005 13:03:15 -0700 Subject: [PATCH 08/42] [ATM]: fix ATM makefile for out-of-source-tree builds Signed-off-by: Jan Beulich Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index d1dcd8eae3c9..5b77188527a9 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y) fore_200e-objs += fore200e_pca_fw.o # guess the target endianess to choose the right PCA-200E firmware image ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y) - CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi) + byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h + CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2) endif endif From a2c1aa54746bace5d03cc66521fbf3bb6fb2f916 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 2 Jun 2005 13:04:07 -0700 Subject: [PATCH 09/42] [ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/fore200e.c | 6 ++---- drivers/atm/he.c | 6 ++---- drivers/atm/nicstar.c | 20 ++++++++++---------- drivers/atm/zatm.c | 11 ++++------- 4 files changed, 18 insertions(+), 25 deletions(-) diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 9e65bfb85ba3..5f702199543a 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e) switch(fore200e->state) { case FORE200E_STATE_COMPLETE: - if (fore200e->stats) - kfree(fore200e->stats); + kfree(fore200e->stats); case FORE200E_STATE_IRQ: free_irq(fore200e->irq, fore200e->atm_dev); @@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e) entry, txq->tail, entry->vc_map, entry->skb); /* free copy of misaligned data */ - if (entry->data) - kfree(entry->data); + kfree(entry->data); /* remove DMA mapping */ fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 3022c548a132..df2c83fd5496 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) init_one_failure: if (atm_dev) atm_dev_deregister(atm_dev); - if (he_dev) - kfree(he_dev); + kfree(he_dev); pci_disable_device(pci_dev); return err; } @@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc) open_failed: if (err) { - if (he_vcc) - kfree(he_vcc); + kfree(he_vcc); clear_bit(ATM_VF_ADDR, &vcc->flags); } else diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 85bf5c8442b0..b2a7b754fd14 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev) PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base); /* Initialize SCQ0, the only VBR SCQ used */ - card->scq1 = (scq_info *) NULL; - card->scq2 = (scq_info *) NULL; + card->scq1 = NULL; + card->scq2 = NULL; card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0); - if (card->scq0 == (scq_info *) NULL) + if (card->scq0 == NULL) { printk("nicstar%d: can't get SCQ0.\n", i); error = 12; @@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd) int i; if (size != VBR_SCQSIZE && size != CBR_SCQSIZE) - return (scq_info *) NULL; + return NULL; scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL); - if (scq == (scq_info *) NULL) - return (scq_info *) NULL; + if (scq == NULL) + return NULL; scq->org = kmalloc(2 * size, GFP_KERNEL); if (scq->org == NULL) { kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) * (size / NS_SCQE_SIZE), GFP_KERNEL); - if (scq->skb == (struct sk_buff **) NULL) + if (scq->skb == NULL) { kfree(scq->org); kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->num_entries = size / NS_SCQE_SIZE; scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size); @@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc) vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE; scq = get_scq(CBR_SCQSIZE, vc->cbr_scd); - if (scq == (scq_info *) NULL) + if (scq == NULL) { PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index); card->scd2vc[frscdi] = NULL; diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 47a800519ad0..8d5e65cb9755 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc) zatm_dev->tx_bw += vcc->qos.txtp.min_pcr; dealloc_shaper(vcc->dev,zatm_vcc->shaper); } - if (zatm_vcc->ring) kfree(zatm_vcc->ring); + kfree(zatm_vcc->ring); } @@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev) return 0; out: for (i = 0; i < NR_MBX; i++) - if (zatm_dev->mbx_start[i] != 0) - kfree((void *) zatm_dev->mbx_start[i]); - if (zatm_dev->rx_map != NULL) - kfree(zatm_dev->rx_map); - if (zatm_dev->tx_map != NULL) - kfree(zatm_dev->tx_map); + kfree(zatm_dev->mbx_start[i]); + kfree(zatm_dev->rx_map); + kfree(zatm_dev->tx_map); free_irq(zatm_dev->irq, dev); return error; } From 4fef0304eeaa4156db5625e3578f92ed94645a43 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 2 Jun 2005 13:06:36 -0700 Subject: [PATCH 10/42] [IPV6]: Kill export of fl6_sock_lookup. There is no usage of this EXPORT_SYMBOL in the kernel. Signed-off-by: Adrian Bunk Acked-by: Hideaki YOSHIFUJI Signed-off-by: David S. Miller --- net/ipv6/ipv6_syms.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv6/ipv6_syms.c b/net/ipv6/ipv6_syms.c index 2f4c91ddc9a3..5ade5a5d1990 100644 --- a/net/ipv6/ipv6_syms.c +++ b/net/ipv6/ipv6_syms.c @@ -37,5 +37,4 @@ EXPORT_SYMBOL(in6_dev_finish_destroy); EXPORT_SYMBOL(xfrm6_rcv); #endif EXPORT_SYMBOL(rt6_lookup); -EXPORT_SYMBOL(fl6_sock_lookup); EXPORT_SYMBOL(ipv6_push_nfrag_opts); From 00ea81459c279f14a7b344320a71c94f60f88929 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 2 Jun 2005 14:02:00 -0700 Subject: [PATCH 11/42] [PATCH] ext3: fix log_do_checkpoint() assertion failure Fix possible false assertion failure in log_do_checkpoint(). We might fail to detect that we actually made a progress when cleaning up the checkpoint lists if we don't retry after writing something to disk. The patch was confirmed to fix observed assertion failures for several users. When we flushed some buffers we need to retry scanning the list. Otherwise we can fail to detect our progress. Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/jbd/checkpoint.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c index 98d830401c56..58133ab9457e 100644 --- a/fs/jbd/checkpoint.c +++ b/fs/jbd/checkpoint.c @@ -339,8 +339,10 @@ int log_do_checkpoint(journal_t *journal) } } while (jh != last_jh && !retry); - if (batch_count) + if (batch_count) { __flush_batch(journal, bhs, &batch_count); + retry = 1; + } /* * If someone cleaned up this transaction while we slept, we're From 7e3b11a9be6ac94bf4af81757b6a10e7e65b846f Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 2 Jun 2005 14:02:01 -0700 Subject: [PATCH 12/42] [PATCH] ext3: fix list scanning in __cleanup_transaction Fix a bug in list scanning that can cause us to skip the last buffer on the checkpoint list (and hence fail to do any progress under some rather unfavorable conditions). The problem is we first do jh=next_jh and then test } while (jh!=last_jh); Hence we skip the last buffer on the list (if it was not the only buffer on the list). As we already do jh=next_jh; in the beginning of the loop we are safe to just remove the assignment in the end. It can happen that 'jh' will be freed at the point we test jh != last_jh but that does not matter as we never *dereference* the pointer. Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/jbd/checkpoint.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c index 58133ab9457e..5a97e346bd95 100644 --- a/fs/jbd/checkpoint.c +++ b/fs/jbd/checkpoint.c @@ -188,7 +188,6 @@ static int __cleanup_transaction(journal_t *journal, transaction_t *transaction) } else { jbd_unlock_bh_state(bh); } - jh = next_jh; } while (jh != last_jh); return ret; From 79f1248962cfa1e11a5610e0349bc3515687516d Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 2 Jun 2005 14:02:02 -0700 Subject: [PATCH 13/42] [PATCH] ppc64: cleanup SPR definitions There are a bunch of irrelevant SPR definitions in asm/processer.h. Cut them down a bit, also add a DABR_TRANSLATION define which will be used shortly. Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-ppc64/processor.h | 159 +--------------------------------- 1 file changed, 1 insertion(+), 158 deletions(-) diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 0035efe2db2b..5ba6aa45e1e2 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -120,103 +120,18 @@ /* Special Purpose Registers (SPRNs)*/ -#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ +#define DABR_TRANSLATION (1UL << 2) #define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ -#define DBCR_EDM 0x80000000 -#define DBCR_IDM 0x40000000 -#define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 -#define DBCR_RST_SYSTEM 3 -#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */ -#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */ -#define DBCR_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ -#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ -#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ -#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ -#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ -#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ -#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ -#define DAC_BYTE 0 -#define DAC_HALF 1 -#define DAC_WORD 2 -#define DAC_QUAD 3 -#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ -#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ -#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ -#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ -#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ -#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ -#define DBCR_SIA 0x00000008 /* Second IAC Enable */ -#define DBCR_SDA 0x00000004 /* Second DAC Enable */ -#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ -#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ -#define DCCR_NOCACHE 0 /* Noncacheable */ -#define DCCR_CACHE 1 /* Cacheable */ -#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ -#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ -#define DCWR_COPY 0 /* Copy-back */ -#define DCWR_WRITE 1 /* Write-through */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ #define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define DSISR_NOHPTE 0x40000000 /* no translation found */ #define DSISR_PROTFAULT 0x08000000 /* protection fault */ #define DSISR_ISSTORE 0x02000000 /* access was a store */ #define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ #define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ -#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ -#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ -#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ -#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ -#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */ -#define ESR_PTR 0x02000000 /* Program Exception - Trap */ -#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ -#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ -#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ #define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ #define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */ #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ @@ -225,23 +140,8 @@ #define SPRN_HID5 0x3F6 /* 970 HID5 */ #define SPRN_TSC 0x3FD /* Thread switch control */ #define SPRN_TST 0x3FC /* Thread switch timeout */ -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ -#define ICCR_NOCACHE 0 /* Noncacheable */ -#define ICCR_CACHE 1 /* Cacheable */ -#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ -#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ -#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ -#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ -#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ -#define SPRN_PID 0x3B1 /* Process ID */ #define SPRN_PIR 0x3FF /* Processor Identification Register */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */ @@ -249,9 +149,6 @@ #define SPRN_RPA 0x3D6 /* Required Physical Address Register */ #define SPRN_SDA 0x3BF /* Sampled Data Address Register */ #define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ -#define SGR_NORMAL 0 -#define SGR_GUARDED 1 #define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ #define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ @@ -264,49 +161,8 @@ #define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */ #define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */ #define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -#define WP_2_17 0 /* 2^17 clocks */ -#define WP_2_21 1 /* 2^21 clocks */ -#define WP_2_25 2 /* 2^25 clocks */ -#define WP_2_29 3 /* 2^29 clocks */ -#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ -#define WRC_NONE 0 /* No reset will occur */ -#define WRC_CORE 1 /* Core reset will occur */ -#define WRC_CHIP 2 /* Chip reset will occur */ -#define WRC_SYSTEM 3 /* System reset will occur */ -#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ -#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ -#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ -#define FP_2_9 0 /* 2^9 clocks */ -#define FP_2_13 1 /* 2^13 clocks */ -#define FP_2_17 2 /* 2^17 clocks */ -#define FP_2_21 3 /* 2^21 clocks */ -#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ -#define TCR_ARE 0x00400000 /* Auto Reload Enable */ -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -#define THRM1_TIN (1<<0) -#define THRM1_TIV (1<<1) -#define THRM1_THRES (0x7f<<2) -#define THRM1_TID (1<<29) -#define THRM1_TIE (1<<30) -#define THRM1_V (1<<31) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<31) -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ -#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ -#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ -#define WRS_NONE 0 /* No WDT reset occurred */ -#define WRS_CORE 1 /* WDT forced core reset */ -#define WRS_CHIP 2 /* WDT forced chip reset */ -#define WRS_SYSTEM 3 /* WDT forced system reset */ -#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ -#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ #define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register */ #define SPRN_VRSAVE 0x100 /* Vector save */ /* Performance monitor SPRs */ @@ -352,28 +208,19 @@ #define CTR SPRN_CTR /* Counter Register */ #define DAR SPRN_DAR /* Data Address Register */ #define DABR SPRN_DABR /* Data Address Breakpoint Register */ -#define DCMP SPRN_DCMP /* Data TLB Compare Register */ #define DEC SPRN_DEC /* Decrement Register */ -#define DMISS SPRN_DMISS /* Data TLB Miss Register */ #define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */ -#define EAR SPRN_EAR /* External Address Register */ -#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */ -#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */ #define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */ #define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */ #define NIADORM SPRN_NIADORM /* NIA Dormant Register */ #define TSC SPRN_TSC /* Thread switch control */ #define TST SPRN_TST /* Thread switch timeout */ #define IABR SPRN_IABR /* Instruction Address Breakpoint Register */ -#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */ -#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */ -#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */ #define L2CR SPRN_L2CR /* PPC 750 L2 control register */ #define __LR SPRN_LR #define PVR SPRN_PVR /* Processor Version */ #define PIR SPRN_PIR /* Processor ID */ #define PURR SPRN_PURR /* Processor Utilization of Resource Register */ -//#define RPA SPRN_RPA /* Required Physical Address Register */ #define SDR1 SPRN_SDR1 /* MMU hash base register */ #define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */ #define SPR1 SPRN_SPRG1 @@ -389,10 +236,6 @@ #define TBRU SPRN_TBRU /* Time Base Read Upper Register */ #define TBWL SPRN_TBWL /* Time Base Write Lower Register */ #define TBWU SPRN_TBWU /* Time Base Write Upper Register */ -#define ICTC 1019 -#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */ -#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */ -#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */ #define XER SPRN_XER /* Processor Version Register (PVR) field extraction */ From 6dc2f0c7df6cefda5932ac8bcd9ca5ef45de36ee Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 2 Jun 2005 14:02:02 -0700 Subject: [PATCH 14/42] [PATCH] ppc64: cleanup iseries runlight support The iseries has a bar graph on the front panel that shows how busy it is. The operating system sets and clears a bit in the CTRL register to control it. Instead of going to the complexity of using a thread info bit, just set and clear it in the idle loop. Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off. Finally don't use the short form of the SPR defines. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/entry.S | 9 --------- arch/ppc64/kernel/head.S | 10 +++++----- arch/ppc64/kernel/idle.c | 8 +++----- arch/ppc64/kernel/process.c | 3 --- arch/ppc64/kernel/sysfs.c | 8 ++------ include/asm-ppc64/processor.h | 27 +++++++++++++++++++++------ include/asm-ppc64/thread_info.h | 4 ++-- 7 files changed, 33 insertions(+), 36 deletions(-) diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index d3604056e1a9..b61572eb2a71 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) REST_8GPRS(14, r1) REST_10GPRS(22, r1) -#ifdef CONFIG_PPC_ISERIES - clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */ - ld r7,TI_FLAGS(r7) /* Get run light flag */ - mfspr r9,CTRLF - srdi r7,r7,TIF_RUN_LIGHT - insrdi r9,r7,1,63 /* Insert run light into CTRL */ - mtspr CTRLT,r9 -#endif - /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 92a744c31ab1..346dbf606b5d 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -626,10 +626,10 @@ system_reset_iSeries: lhz r24,PACAPACAINDEX(r13) /* Get processor # */ cmpwi 0,r24,0 /* Are we processor 0? */ beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,CTRLF - li r5,RUNLATCH /* Turn off the run light */ + mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ andc r4,r4,r5 - mtspr CTRLT,r4 + mtspr SPRN_CTRLT,r4 1: HMT_LOW @@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary) mfspr r4, HID0 ori r4, r4, 0x1 mtspr HID0, r4 - mfspr r4, CTRLF + mfspr r4, SPRN_CTRLF oris r4, r4, 0x40 - mtspr CTRLT, r4 + mtspr SPRN_CTRLT, r4 blr #endif diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 6abc621d3ba0..f24ce2b87200 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -75,13 +75,9 @@ static int iSeries_idle(void) { struct paca_struct *lpaca; long oldval; - unsigned long CTRL; /* ensure iSeries run light will be out when idle */ - clear_thread_flag(TIF_RUN_LIGHT); - CTRL = mfspr(CTRLF); - CTRL &= ~RUNLATCH; - mtspr(CTRLT, CTRL); + ppc64_runlatch_off(); lpaca = get_paca(); @@ -111,7 +107,9 @@ static int iSeries_idle(void) } } + ppc64_runlatch_on(); schedule(); + ppc64_runlatch_off(); } return 0; diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index 8b0686122738..cdfecbeb331f 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -378,9 +378,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->gpr[1] = sp + sizeof(struct pt_regs); p->thread.regs = NULL; /* no user register state */ clear_ti_thread_flag(p->thread_info, TIF_32BIT); -#ifdef CONFIG_PPC_ISERIES - set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT); -#endif } else { childregs->gpr[1] = usp; p->thread.regs = childregs; diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 0925694c3ce5..c8fa6569b2fd 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void) #ifdef CONFIG_PPC_PSERIES unsigned long set, reset; int ret; - unsigned int ctrl; #endif /* CONFIG_PPC_PSERIES */ /* Only need to enable them once */ @@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void) * On SMT machines we have to set the run latch in the ctrl register * in order to make PMC6 spin. */ - if (cpu_has_feature(CPU_FTR_SMT)) { - ctrl = mfspr(CTRLF); - ctrl |= RUNLATCH; - mtspr(CTRLT, ctrl); - } + if (cpu_has_feature(CPU_FTR_SMT)) + ppc64_runlatch_on(); #endif /* CONFIG_PPC_PSERIES */ } diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 5ba6aa45e1e2..809c634ba1df 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -164,6 +164,9 @@ #define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */ #define SPRN_VRSAVE 0x100 /* Vector save */ +#define SPRN_CTRLF 0x088 +#define SPRN_CTRLT 0x098 +#define CTRL_RUNLATCH 0x1 /* Performance monitor SPRs */ #define SPRN_SIAR 780 @@ -279,12 +282,6 @@ #define XGLUE(a,b) a##b #define GLUE(a,b) XGLUE(a,b) -/* iSeries CTRL register (for runlatch) */ - -#define CTRLT 0x098 -#define CTRLF 0x088 -#define RUNLATCH 0x0001 - #ifdef __ASSEMBLY__ #define _GLOBAL(name) \ @@ -499,6 +496,24 @@ static inline void prefetchw(const void *x) #define HAVE_ARCH_PICK_MMAP_LAYOUT +static inline void ppc64_runlatch_on(void) +{ + unsigned long ctrl; + + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); +} + +static inline void ppc64_runlatch_off(void) +{ + unsigned long ctrl; + + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); +} + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h index 037b5e06083c..48b7900e90ec 100644 --- a/include/asm-ppc64/thread_info.h +++ b/include/asm-ppc64/thread_info.h @@ -96,7 +96,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 5 /* 32 bit binary */ -#define TIF_RUN_LIGHT 6 /* iSeries run light */ +/* #define SPARE 6 */ #define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */ #define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */ #define TIF_SINGLESTEP 9 /* singlestepping active */ @@ -110,7 +110,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1< Date: Thu, 2 Jun 2005 14:02:03 -0700 Subject: [PATCH 15/42] [PATCH] ppc64: remove decr_overclock Now that we have HZ=1000 there is much less of a need for decr_overclock. Remove it. Leave spread_lpevents but move it into iSeries_setup.c. We should look at making event spreading the default some day. Signed-off-by: Anton Blanchard Acked-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/iSeries_setup.c | 22 ++++++++++++ arch/ppc64/kernel/setup.c | 56 +------------------------------ arch/ppc64/kernel/smp.c | 3 +- 3 files changed, 24 insertions(+), 57 deletions(-) diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index da20120f2261..6d06eb550a3f 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -852,6 +852,28 @@ static int __init iSeries_src_init(void) late_initcall(iSeries_src_init); +static int set_spread_lpevents(char *str) +{ + unsigned long i; + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + for (i = 1; i < val; ++i) + paca[i].lpqueue_ptr = paca[0].lpqueue_ptr; + + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + void __init iSeries_early_setup(void) { iSeries_fixup_klimit(); diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 21c57f539c29..dce198d39328 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -103,11 +103,6 @@ extern void unflatten_device_tree(void); extern void smp_release_cpus(void); -unsigned long decr_overclock = 1; -unsigned long decr_overclock_proc0 = 1; -unsigned long decr_overclock_set = 0; -unsigned long decr_overclock_proc0_set = 0; - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -1120,64 +1115,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg) printk("[dump]%04x %s\n", src, msg); } -int set_spread_lpevents( char * str ) -{ - /* The parameter is the number of processors to share in processing lp events */ - unsigned long i; - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val > 0 ) && ( val <= NR_CPUS ) ) { - for ( i=1; idefault_decr = tb_ticks_per_jiffy / decr_overclock_proc0; + lpaca->default_decr = tb_ticks_per_jiffy; lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -int set_decr_overclock_proc0( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_proc0_set = 1; - decr_overclock_proc0 = val; - printk("proc 0 decrementer overclock factor of %ld\n", val); - } - else - printk("invalid proc 0 decrementer overclock factor of %ld\n", val); - return 1; -} - -int set_decr_overclock( char * str ) -{ - unsigned long val = simple_strtoul( str, NULL, 0 ); - if ( ( val >= 1 ) && ( val <= 48 ) ) { - decr_overclock_set = 1; - decr_overclock = val; - printk("decrementer overclock factor of %ld\n", val); - } - else - printk("invalid decrementer overclock factor of %ld\n", val); - return 1; - -} - -__setup("spread_lpevents=", set_spread_lpevents ); -__setup("decr_overclock_proc0=", set_decr_overclock_proc0 ); -__setup("decr_overclock=", set_decr_overclock ); - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c index 3b906cd94037..9ef5d36d6b25 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/ppc64/kernel/smp.c @@ -334,7 +334,6 @@ void smp_call_function_interrupt(void) } } -extern unsigned long decr_overclock; extern struct gettimeofday_struct do_gtod; struct thread_info *current_set[NR_CPUS]; @@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; - paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock; + paca[cpu].default_decr = tb_ticks_per_jiffy; if (!cpu_has_feature(CPU_FTR_SLB)) { void *tmp; From 0fd56f67890acf7904c83e7de6cb71723eb1c962 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 2 Jun 2005 14:04:00 -0700 Subject: [PATCH 16/42] [PATCH] drivers/net/hamradio/baycom_epp.c: cleanups The times when tricky goto's produced better codes are long gone. This patch should express the same in a better way. (Also fixes the final gcc-4.0 x86 compile error) Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/hamradio/baycom_epp.c | 126 +++++++++--------------------- 1 file changed, 36 insertions(+), 90 deletions(-) diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 1c563f905a59..a7f15d9f13e5 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc, } /* --------------------------------------------------------------------- */ -/* - * high performance HDLC encoder - * yes, it's ugly, but generates pretty good code - */ - -#define ENCODEITERA(j) \ -({ \ - if (!(notbitstream & (0x1f0 << j))) \ - goto stuff##j; \ - encodeend##j: ; \ -}) - -#define ENCODEITERB(j) \ -({ \ - stuff##j: \ - bitstream &= ~(0x100 << j); \ - bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \ - ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \ - numbit++; \ - notbitstream = ~bitstream; \ - goto encodeend##j; \ -}) - static void encode_hdlc(struct baycom_state *bc) { @@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc) int pkt_len; unsigned bitstream, notbitstream, bitbuf, numbit, crc; unsigned char crcarr[2]; + int j; if (bc->hdlctx.bufcnt > 0) return; @@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc) pkt_len--; if (!pkt_len) bp = crcarr; - ENCODEITERA(0); - ENCODEITERA(1); - ENCODEITERA(2); - ENCODEITERA(3); - ENCODEITERA(4); - ENCODEITERA(5); - ENCODEITERA(6); - ENCODEITERA(7); - goto enditer; - ENCODEITERB(0); - ENCODEITERB(1); - ENCODEITERB(2); - ENCODEITERB(3); - ENCODEITERB(4); - ENCODEITERB(5); - ENCODEITERB(6); - ENCODEITERB(7); - enditer: + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } numbit += 8; while (numbit >= 8) { *wp++ = bitbuf; @@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev) bc->stats.rx_packets++; } -#define DECODEITERA(j) \ -({ \ - if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \ - goto flgabrt##j; \ - if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \ - goto stuff##j; \ - enditer##j: ; \ -}) - -#define DECODEITERB(j) \ -({ \ - flgabrt##j: \ - if (!(notbitstream & (0x1fc << j))) { /* abort received */ \ - state = 0; \ - goto enditer##j; \ - } \ - if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \ - goto enditer##j; \ - if (state) \ - do_rxpacket(dev); \ - bc->hdlcrx.bufcnt = 0; \ - bc->hdlcrx.bufptr = bc->hdlcrx.buf; \ - state = 1; \ - numbits = 7-j; \ - goto enditer##j; \ - stuff##j: \ - numbits--; \ - bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \ - goto enditer##j; \ -}) - static int receive(struct net_device *dev, int cnt) { struct baycom_state *bc = netdev_priv(dev); @@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt) unsigned char tmp[128]; unsigned char *cp; int cnt2, ret = 0; + int j; numbits = bc->hdlcrx.numbits; state = bc->hdlcrx.state; @@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt) bitbuf |= (*cp) << 8; numbits += 8; notbitstream = ~bitstream; - DECODEITERA(0); - DECODEITERA(1); - DECODEITERA(2); - DECODEITERA(3); - DECODEITERA(4); - DECODEITERA(5); - DECODEITERA(6); - DECODEITERA(7); - goto enddec; - DECODEITERB(0); - DECODEITERB(1); - DECODEITERB(2); - DECODEITERB(3); - DECODEITERB(4); - DECODEITERB(5); - DECODEITERB(6); - DECODEITERB(7); - enddec: + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* not flag received */ + else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } while (state && numbits >= 8) { if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { state = 0; From 0baab86b00cdf9785ac2bb2ce1ab63995b3866ca Mon Sep 17 00:00:00 2001 From: Edward Falk Date: Thu, 2 Jun 2005 18:17:13 -0400 Subject: [PATCH 17/42] libata: update inline source docs --- drivers/scsi/libata-core.c | 283 ++++++++++++++++++++++++++++++++++++- include/linux/libata.h | 58 ++++++++ 2 files changed, 334 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 31b2984f379a..86e84ed87bee 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_wait_idle(ap); } + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_exec_command - issue ATA command to host controller + * ata_exec_command_pio - issue ATA command to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Issues PIO/MMIO write to ATA command register, with proper + * Issues PIO write to ATA command register, with proper * synchronization with interrupt handler / other threads. * * LOCKING: @@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_pause(ap); } + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_tf_read - input device's ATA taskfile shadow registers + * ata_tf_read_pio - input device's ATA taskfile shadow registers * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * @@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) } } + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * and return it's value. This also clears pending interrupts + * and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * via MMIO and return it's value. This also clears pending interrupts + * via MMIO and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap) return readb((void __iomem *) ap->ioaddr.status_addr); } + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_check_status(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) @@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap) return ata_check_status_pio(ap); } + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_altstatus(struct ata_port *ap) { if (ap->ops->check_altstatus) @@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap) return inb(ap->ioaddr.altstatus_addr); } + +/** + * ata_chk_err - Read device error reg + * @ap: port where the device is + * + * Reads ATA taskfile error register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_err() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_chk_err(struct ata_port *ap) { if (ap->ops->check_err) @@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s, } } + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) { } + /** * ata_std_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * * Use the method defined in the ATA specification to * make either device 0, or device 1, active on the - * ATA channel. + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. * * LOCKING: * caller. @@ -2127,6 +2236,19 @@ void ata_qc_prep(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ + + +/** + * ata_sg_init_one - Prepare a one-entry scatter-gather list. + * @qc: Queued command + * @buf: transfer buffer + * @buflen: length of buf + * + * Builds a single-entry scatter-gather list to initiate a + * transfer utilizing the specified buffer. + * + * LOCKING: + */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2158,6 +2280,18 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * spin_lock_irqsave(host_set lock) */ + +/** + * ata_sg_init - Assign a scatter gather list to a queued command + * @qc: Queued command + * @sg: Scatter-gather list + * @n_elem: length of sg list + * + * Attaches a scatter-gather list to a queued command. + * + * LOCKING: + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2331,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap) ata_qc_complete(qc, drv_stat); } + +/** + * swap_buf_le16 - + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { #ifdef __BIG_ENDIAN @@ -2992,6 +3138,7 @@ err_out: return -1; } + /** * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner * @qc: command to issue to device @@ -3001,6 +3148,8 @@ err_out: * classes called "protocols", and issuing each type of protocol * is slightly different. * + * May be used as the qc_issue() entry in ata_port_operations. + * * LOCKING: * spin_lock_irqsave(host_set lock) * @@ -3058,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) } /** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3165,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_start(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3173,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) ata_bmdma_start_pio(qc); } + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3181,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) ata_bmdma_setup_pio(qc); } + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @qc: Info associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_irq_clear(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3193,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap) } + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @qc: Info associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + u8 ata_bmdma_status(struct ata_port *ap) { u8 host_stat; @@ -3204,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap) return host_stat; } + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Info associated with this ATA transaction. + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_stop(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3407,6 +3621,19 @@ err_out: ata_qc_complete(qc, ATA_ERR); } + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3420,6 +3647,18 @@ int ata_port_start (struct ata_port *ap) return 0; } + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + */ + void ata_port_stop (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3720,7 +3959,15 @@ int ata_scsi_release(struct Scsi_Host *host) /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. */ + void ata_std_ports(struct ata_ioports *ioaddr) { ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; @@ -3762,6 +4009,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) return probe_ent; } + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + */ + #ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) @@ -3843,6 +4104,14 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * @port_info: Information from low-level host driver * @n_ports: Number of ports attached to host controller * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * * LOCKING: * Inherited from PCI layer (may sleep). * diff --git a/include/linux/libata.h b/include/linux/libata.h index 1f7e2039a04e..ad410590664f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -466,12 +466,34 @@ static inline u8 ata_chk_status(struct ata_port *ap) return ap->ops->check_status(ap); } + +/** + * ata_pause - Flush writes and pause 400 nanoseconds. + * @ap: Port to wait for. + * + * LOCKING: + * Inherited from caller. + */ + static inline void ata_pause(struct ata_port *ap) { ata_altstatus(ap); ndelay(400); } + +/** + * ata_busy_wait - Wait for a port status register + * @ap: Port to wait for. + * + * Waits up to max*10 microseconds for the selected bits in the port's + * status register to be cleared. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, unsigned int max) { @@ -486,6 +508,18 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, return status; } + +/** + * ata_wait_idle - Wait for a port to be idle. + * @ap: Port to wait for. + * + * Waits up to 10ms for port's BUSY and DRQ signals to clear. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_wait_idle(struct ata_port *ap) { u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); @@ -524,6 +558,18 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns tf->device = ATA_DEVICE_OBS | ATA_DEV1; } + +/** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_irq_on(struct ata_port *ap) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -543,6 +589,18 @@ static inline u8 ata_irq_on(struct ata_port *ap) return tmp; } + +/** + * ata_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Wait up to 10 ms for legacy IDE device to become idle (BUSY + * or BUSY+DRQ clear). Obtain dma status and port status from + * device. Clear the interrupt. Return port status. + * + * LOCKING: + */ + static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) { unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; From decc6d0b68f27bbb8a0357fccf41936a3c196b03 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 2 Jun 2005 18:42:33 -0400 Subject: [PATCH 18/42] libata: kernel-doc warning fixes --- drivers/scsi/libata-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 86e84ed87bee..a5d7c33a434d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3359,7 +3359,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) /** * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Clear interrupt and error flags in DMA status register. * @@ -3384,7 +3384,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap) /** * ata_bmdma_status - Read PCI IDE BMDMA status - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Read and return BMDMA status register. * @@ -3408,7 +3408,7 @@ u8 ata_bmdma_status(struct ata_port *ap) /** * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Clears the ATA_DMA_START flag in the dma control register * From b597ef4712c05c962640a655386a7f06cc1a1fbc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 2 Jun 2005 16:36:00 -0700 Subject: [PATCH 19/42] [NET]: Fix locking in shaper driver. o use a semaphore instead of an opencoded and racy lock o move locking out of shaper_kick and into the callers - most just released the lock before calling shaper_kick o remove in_interrupt() tests. from ->close we can always block, from ->hard_start_xmit and timer context never Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/net/shaper.c | 86 +++++++++------------------------------ include/linux/if_shaper.h | 3 +- 2 files changed, 20 insertions(+), 69 deletions(-) diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c index e68cf5fb4920..20edeb345792 100644 --- a/drivers/net/shaper.c +++ b/drivers/net/shaper.c @@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */ #define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n" -/* - * Locking - */ - -static int shaper_lock(struct shaper *sh) -{ - /* - * Lock in an interrupt must fail - */ - while (test_and_set_bit(0, &sh->locked)) - { - if (!in_interrupt()) - sleep_on(&sh->wait_queue); - else - return 0; - - } - return 1; -} - static void shaper_kick(struct shaper *sh); -static void shaper_unlock(struct shaper *sh) -{ - clear_bit(0, &sh->locked); - wake_up(&sh->wait_queue); - shaper_kick(sh); -} - /* * Compute clocks on a buffer */ @@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec) * Throw a frame at a shaper. */ -static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) + +static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct shaper *shaper = dev->priv; struct sk_buff *ptr; - /* - * Get ready to work on this shaper. Lock may fail if its - * an interrupt and locked. - */ - - if(!shaper_lock(shaper)) - return -1; + if (down_trylock(&shaper->sem)) + return -1; + ptr=shaper->sendq.prev; /* @@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) dev_kfree_skb(ptr); shaper->stats.collisions++; } - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); return 0; } @@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb) static void shaper_timer(unsigned long data) { - struct shaper *sh=(struct shaper *)data; - shaper_kick(sh); + struct shaper *shaper = (struct shaper *)data; + + if (!down_trylock(&shaper->sem)) { + shaper_kick(shaper); + up(&shaper->sem); + } else + mod_timer(&shaper->timer, jiffies); } /* @@ -310,19 +287,6 @@ static void shaper_kick(struct shaper *shaper) { struct sk_buff *skb; - /* - * Shaper unlock will kick - */ - - if (test_and_set_bit(0, &shaper->locked)) - { - if(sh_debug) - printk("Shaper locked.\n"); - mod_timer(&shaper->timer, jiffies); - return; - } - - /* * Walk the list (may be empty) */ @@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper) if(skb!=NULL) mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock); - - clear_bit(0, &shaper->locked); } @@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper) static void shaper_flush(struct shaper *shaper) { struct sk_buff *skb; - if(!shaper_lock(shaper)) - { - printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n"); - return; - } + + down(&shaper->sem); while((skb=skb_dequeue(&shaper->sendq))!=NULL) dev_kfree_skb(skb); - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); } /* @@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev) * ARP and other resolutions and not before. */ - -static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct shaper *sh=dev->priv; - return shaper_qframe(sh, skb); -} - static struct net_device_stats *shaper_get_stats(struct net_device *dev) { struct shaper *sh=dev->priv; @@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev) init_timer(&sh->timer); sh->timer.function=shaper_timer; sh->timer.data=(unsigned long)sh; - init_waitqueue_head(&sh->wait_queue); } /* diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h index 0485b256d043..004e6f09a6e2 100644 --- a/include/linux/if_shaper.h +++ b/include/linux/if_shaper.h @@ -23,7 +23,7 @@ struct shaper __u32 shapeclock; unsigned long recovery; /* Time we can next clock a packet out on an empty queue */ - unsigned long locked; + struct semaphore sem; struct net_device_stats stats; struct net_device *dev; int (*hard_start_xmit) (struct sk_buff *skb, @@ -38,7 +38,6 @@ struct shaper int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh); void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr); struct net_device_stats* (*get_stats)(struct net_device *dev); - wait_queue_head_t wait_queue; struct timer_list timer; }; From 5ba0eac6e0b7e2889649a1105d97c600595e2bb1 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 2 Jun 2005 16:48:05 -0700 Subject: [PATCH 20/42] [NET]: Fix HH_DATA_OFF. When the hardware header size is a multiple of HH_DATA_MOD, HH_DATA_OFF() incorrectly returns HH_DATA_MOD (instead of 0). This affects ieee80211 layer as 802.11 header is 32 bytes long. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 470af8c1a4a0..ba5d1236aa17 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -204,7 +204,7 @@ struct hh_cache /* cached hardware header; allow for machine alignment needs. */ #define HH_DATA_MOD 16 #define HH_DATA_OFF(__len) \ - (HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1))) + (HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1)) #define HH_DATA_ALIGN(__len) \ (((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1)) unsigned long hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)]; From f4800078d9ed4bd20b1b27f56e7b68cfa0d73038 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sun, 1 May 2005 16:05:40 -0700 Subject: [PATCH 21/42] [PATCH] USB: Support multiply-LUN devices in ub Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff -urp -X dontdiff linux-2.6.12-rc3/drivers/block/ub.c linux-2.6.12-rc3-lem/drivers/block/ub.c --- drivers/block/ub.c | 600 +++++++++++++++++++++++++++------------------ 1 file changed, 364 insertions(+), 236 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ce42889f98fb..adc4dcc306f4 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -8,13 +8,12 @@ * and is not licensed separately. See file COPYING for details. * * TODO (sorted by decreasing priority) + * -- Kill first_open (Al Viro fixed the block layer now) * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) - * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries * -- verify the 13 conditions and do bulk resets - * -- normal pool of commands instead of cmdv[]? * -- kill last_pipe and simply do two-state clearing on both pipes * -- verify protocol (bulk) from USB descriptors (maybe...) * -- highmem and sg @@ -49,7 +48,14 @@ #define US_SC_SCSI 0x06 /* Transparent */ /* + * This many LUNs per USB device. + * Every one of them takes a host, see UB_MAX_HOSTS. */ +#define UB_MAX_LUNS 4 + +/* + */ + #define UB_MINORS_PER_MAJOR 8 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ @@ -65,7 +71,7 @@ struct bulk_cb_wrap { u32 Tag; /* unique per command id */ __le32 DataTransferLength; /* size of data */ u8 Flags; /* direction in bit 0 */ - u8 Lun; /* LUN normally 0 */ + u8 Lun; /* LUN */ u8 Length; /* of of the CDB */ u8 CDB[UB_MAX_CDB_SIZE]; /* max command */ }; @@ -168,6 +174,7 @@ struct ub_scsi_cmd { unsigned int len; /* Requested length */ // struct scatterlist sgv[UB_MAX_REQ_SG]; + struct ub_lun *lun; void (*done)(struct ub_dev *, struct ub_scsi_cmd *); void *back; }; @@ -252,25 +259,47 @@ struct ub_scsi_cmd_queue { }; /* - * The UB device instance. + * The block device instance (one per LUN). */ -struct ub_dev { - spinlock_t lock; - int id; /* Number among ub's */ - atomic_t poison; /* The USB device is disconnected */ - int openc; /* protected by ub_lock! */ - /* kref is too implicit for our taste */ - unsigned int tagcnt; +struct ub_lun { + struct ub_dev *udev; + struct list_head link; + struct gendisk *disk; + int id; /* Host index */ + int num; /* LUN number */ + char name[16]; + int changed; /* Media was changed */ int removable; int readonly; int first_open; /* Kludge. See ub_bd_open. */ - char name[8]; + + /* Use Ingo's mempool if or when we have more than one command. */ + /* + * Currently we never need more than one command for the whole device. + * However, giving every LUN a command is a cheap and automatic way + * to enforce fairness between them. + */ + int cmda[1]; + struct ub_scsi_cmd cmdv[1]; + + struct ub_capacity capacity; +}; + +/* + * The USB device instance. + */ +struct ub_dev { + spinlock_t lock; + atomic_t poison; /* The USB device is disconnected */ + int openc; /* protected by ub_lock! */ + /* kref is too implicit for our taste */ + unsigned int tagcnt; + char name[12]; struct usb_device *dev; struct usb_interface *intf; - struct ub_capacity capacity; - struct gendisk *disk; + struct list_head luns; unsigned int send_bulk_pipe; /* cached pipe values */ unsigned int recv_bulk_pipe; @@ -279,10 +308,6 @@ struct ub_dev { struct tasklet_struct tasklet; - /* XXX Use Ingo's mempool (once we have more than one) */ - int cmda[1]; - struct ub_scsi_cmd cmdv[1]; - struct ub_scsi_cmd_queue cmd_queue; struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */ unsigned char top_sense[UB_SENSE_SIZE]; @@ -301,9 +326,9 @@ struct ub_dev { /* */ static void ub_cleanup(struct ub_dev *sc); -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq); +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq); +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq); static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, struct request *rq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); @@ -320,8 +345,10 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); -static int ub_sync_tur(struct ub_dev *sc); -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret); +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret); +static int ub_probe_lun(struct ub_dev *sc, int lnum); /* */ @@ -342,6 +369,7 @@ MODULE_DEVICE_TABLE(usb, ub_usb_ids); */ #define UB_MAX_HOSTS 26 static char ub_hostv[UB_MAX_HOSTS]; + static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */ /* @@ -406,6 +434,8 @@ static ssize_t ub_diag_show(struct device *dev, char *page) { struct usb_interface *intf; struct ub_dev *sc; + struct list_head *p; + struct ub_lun *lun; int cnt; unsigned long flags; int nc, nh; @@ -421,9 +451,15 @@ static ssize_t ub_diag_show(struct device *dev, char *page) spin_lock_irqsave(&sc->lock, flags); cnt += sprintf(page + cnt, - "qlen %d qmax %d changed %d removable %d readonly %d\n", - sc->cmd_queue.qlen, sc->cmd_queue.qmax, - sc->changed, sc->removable, sc->readonly); + "qlen %d qmax %d\n", + sc->cmd_queue.qlen, sc->cmd_queue.qmax); + + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + cnt += sprintf(page + cnt, + "lun %u changed %d removable %d readonly %d\n", + lun->num, lun->changed, lun->removable, lun->readonly); + } if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0; for (j = 0; j < SCMD_TRACE_SZ; j++) { @@ -523,53 +559,63 @@ static void ub_put(struct ub_dev *sc) */ static void ub_cleanup(struct ub_dev *sc) { + struct list_head *p; + struct ub_lun *lun; request_queue_t *q; - /* I don't think queue can be NULL. But... Stolen from sx8.c */ - if ((q = sc->disk->queue) != NULL) - blk_cleanup_queue(q); + while (!list_empty(&sc->luns)) { + p = sc->luns.next; + lun = list_entry(p, struct ub_lun, link); + list_del(p); - /* - * If we zero disk->private_data BEFORE put_disk, we have to check - * for NULL all over the place in open, release, check_media and - * revalidate, because the block level semaphore is well inside the - * put_disk. But we cannot zero after the call, because *disk is gone. - * The sd.c is blatantly racy in this area. - */ - /* disk->private_data = NULL; */ - put_disk(sc->disk); - sc->disk = NULL; + /* I don't think queue can be NULL. But... Stolen from sx8.c */ + if ((q = lun->disk->queue) != NULL) + blk_cleanup_queue(q); + /* + * If we zero disk->private_data BEFORE put_disk, we have + * to check for NULL all over the place in open, release, + * check_media and revalidate, because the block level + * semaphore is well inside the put_disk. + * But we cannot zero after the call, because *disk is gone. + * The sd.c is blatantly racy in this area. + */ + /* disk->private_data = NULL; */ + put_disk(lun->disk); + lun->disk = NULL; + + ub_id_put(lun->id); + kfree(lun); + } - ub_id_put(sc->id); kfree(sc); } /* * The "command allocator". */ -static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc) +static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun) { struct ub_scsi_cmd *ret; - if (sc->cmda[0]) + if (lun->cmda[0]) return NULL; - ret = &sc->cmdv[0]; - sc->cmda[0] = 1; + ret = &lun->cmdv[0]; + lun->cmda[0] = 1; return ret; } -static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd) +static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd) { - if (cmd != &sc->cmdv[0]) { + if (cmd != &lun->cmdv[0]) { printk(KERN_WARNING "%s: releasing a foreign cmd %p\n", - sc->name, cmd); + lun->name, cmd); return; } - if (!sc->cmda[0]) { - printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name); + if (!lun->cmda[0]) { + printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name); return; } - sc->cmda[0] = 0; + lun->cmda[0] = 0; } /* @@ -630,29 +676,30 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc) static void ub_bd_rq_fn(request_queue_t *q) { - struct ub_dev *sc = q->queuedata; + struct ub_lun *lun = q->queuedata; struct request *rq; while ((rq = elv_next_request(q)) != NULL) { - if (ub_bd_rq_fn_1(sc, rq) != 0) { + if (ub_bd_rq_fn_1(lun, rq) != 0) { blk_stop_queue(q); break; } } } -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq) { + struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; int rc; - if (atomic_read(&sc->poison) || sc->changed) { + if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); ub_end_rq(rq, 0); return 0; } - if ((cmd = ub_get_cmd(sc)) == NULL) + if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); @@ -661,32 +708,30 @@ static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) if (blk_pc_request(rq)) { rc = ub_cmd_build_packet(sc, cmd, rq); } else { - rc = ub_cmd_build_block(sc, cmd, rq); + rc = ub_cmd_build_block(sc, lun, cmd, rq); } if (rc != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } - cmd->state = UB_CMDST_INIT; + cmd->lun = lun; cmd->done = ub_rw_cmd_done; cmd->back = rq; cmd->tag = sc->tagcnt++; if ((rc = ub_submit_scsi(sc, cmd)) != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq) +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq) { int ub_dir; #if 0 /* We use rq->buffer for now */ @@ -707,7 +752,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, sg = &cmd->sgv[0]; n_elem = blk_rq_map_sg(q, rq, sg); if (n_elem <= 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; /* request with no s/g entries? */ @@ -716,7 +761,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, if (n_elem != 1) { /* Paranoia */ printk(KERN_WARNING "%s: request with %d segments\n", sc->name, n_elem); - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; @@ -748,8 +793,8 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, * The call to blk_queue_hardsect_size() guarantees that request * is aligned, but it is given in terms of 512 byte units, always. */ - block = rq->sector >> sc->capacity.bshift; - nblks = rq->nr_sectors >> sc->capacity.bshift; + block = rq->sector >> lun->capacity.bshift; + nblks = rq->nr_sectors >> lun->capacity.bshift; cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ @@ -803,7 +848,8 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct request *rq = cmd->back; - struct gendisk *disk = sc->disk; + struct ub_lun *lun = cmd->lun; + struct gendisk *disk = lun->disk; request_queue_t *q = disk->queue; int uptodate; @@ -818,7 +864,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) else uptodate = 0; - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(q); } @@ -887,7 +933,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) bcb->Tag = cmd->tag; /* Endianness is not important */ bcb->DataTransferLength = cpu_to_le32(cmd->len); bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0; - bcb->Lun = 0; /* No multi-LUN yet */ + bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0; bcb->Length = cmd->cdb_len; /* copy the command payload */ @@ -1002,9 +1048,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1025,9 +1070,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1046,9 +1090,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1107,9 +1150,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1140,9 +1182,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1164,9 +1205,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * encounter such a thing, try to read the CSW again. */ if (++cmd->stat_count >= 4) { - printk(KERN_NOTICE "%s: " - "unable to get CSW on device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: unable to get CSW\n", + sc->name); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1207,10 +1247,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) */ if (++cmd->stat_count >= 4) { printk(KERN_NOTICE "%s: " - "tag mismatch orig 0x%x reply 0x%x " - "on device %u\n", - sc->name, cmd->tag, bcs->Tag, - sc->dev->devnum); + "tag mismatch orig 0x%x reply 0x%x\n", + sc->name, cmd->tag, bcs->Tag); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1244,8 +1282,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else { printk(KERN_WARNING "%s: " - "wrong command state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "wrong command state %d\n", + sc->name, cmd->state); goto Bad_End; } return; @@ -1288,7 +1326,6 @@ static void __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { /* XXX Clear stalls */ - printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */ ub_complete(&sc->work_done); ub_state_done(sc, cmd, rc); return; @@ -1333,6 +1370,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scmd->state = UB_CMDST_INIT; scmd->data = sc->top_sense; scmd->len = UB_SENSE_SIZE; + scmd->lun = cmd->lun; scmd->done = ub_top_sense_done; scmd->back = cmd; @@ -1411,14 +1449,14 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) } if (cmd != scmd->back) { printk(KERN_WARNING "%s: " - "sense done for wrong command 0x%x on device %u\n", - sc->name, cmd->tag, sc->dev->devnum); + "sense done for wrong command 0x%x\n", + sc->name, cmd->tag); return; } if (cmd->state != UB_CMDST_SENSE) { printk(KERN_WARNING "%s: " - "sense done with bad cmd state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "sense done with bad cmd state %d\n", + sc->name, cmd->state); return; } @@ -1429,68 +1467,32 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) ub_scsi_urb_compl(sc, cmd); } -#if 0 -/* Determine what the maximum LUN supported is */ -int usb_stor_Bulk_max_lun(struct us_data *us) -{ - int result; - - /* issue the command */ - result = usb_stor_control_msg(us, us->recv_ctrl_pipe, - US_BULK_GET_MAX_LUN, - USB_DIR_IN | USB_TYPE_CLASS | - USB_RECIP_INTERFACE, - 0, us->ifnum, us->iobuf, 1, HZ); - - /* - * Some devices (i.e. Iomega Zip100) need this -- apparently - * the bulk pipes get STALLed when the GetMaxLUN request is - * processed. This is, in theory, harmless to all other devices - * (regardless of if they stall or not). - */ - if (result < 0) { - usb_stor_clear_halt(us, us->recv_bulk_pipe); - usb_stor_clear_halt(us, us->send_bulk_pipe); - } - - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); - - /* if we have a successful request, return the result */ - if (result == 1) - return us->iobuf[0]; - - /* return the default -- no LUNs */ - return 0; -} -#endif - /* * This is called from a process context. */ -static void ub_revalidate(struct ub_dev *sc) +static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) { - sc->readonly = 0; /* XXX Query this from the device */ + lun->readonly = 0; /* XXX Query this from the device */ - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; - if (ub_sync_tur(sc) != 0) + if (ub_sync_tur(sc, lun) != 0) return; /* Not ready */ - sc->changed = 0; + lun->changed = 0; - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { /* * The retry here means something is wrong, either with the * device, with the transport, or with our code. * We keep this because sd.c has retries for capacity. */ - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; } } } @@ -1503,12 +1505,15 @@ static void ub_revalidate(struct ub_dev *sc) static int ub_bd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; + struct ub_lun *lun; struct ub_dev *sc; unsigned long flags; int rc; - if ((sc = disk->private_data) == NULL) + if ((lun = disk->private_data) == NULL) return -ENXIO; + sc = lun->udev; + spin_lock_irqsave(&ub_lock, flags); if (atomic_read(&sc->poison)) { spin_unlock_irqrestore(&ub_lock, flags); @@ -1529,15 +1534,15 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * The bottom line is, Al Viro says that we should not allow * bdev->bd_invalidated to be set when doing add_disk no matter what. */ - if (sc->first_open) { - if (sc->changed) { - sc->first_open = 0; + if (lun->first_open) { + lun->first_open = 0; + if (lun->changed) { rc = -ENOMEDIUM; goto err_open; } } - if (sc->removable || sc->readonly) + if (lun->removable || lun->readonly) check_disk_change(inode->i_bdev); /* @@ -1545,12 +1550,12 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * under some pretty murky conditions (a failure of READ CAPACITY). * We may need it one day. */ - if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) { + if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) { rc = -ENOMEDIUM; goto err_open; } - if (sc->readonly && (filp->f_mode & FMODE_WRITE)) { + if (lun->readonly && (filp->f_mode & FMODE_WRITE)) { rc = -EROFS; goto err_open; } @@ -1567,7 +1572,8 @@ err_open: static int ub_bd_release(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; + struct ub_dev *sc = lun->udev; ub_put(sc); return 0; @@ -1597,20 +1603,14 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp, */ static int ub_bd_revalidate(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - if (!atomic_read(&sc->poison)) { /* Cover sc->dev */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, - sc->capacity.nsec, sc->capacity.bsize); - } + ub_revalidate(lun->udev, lun); /* XXX Support sector size switching like in sr.c */ - blk_queue_hardsect_size(disk->queue, sc->capacity.bsize); - set_capacity(disk, sc->capacity.nsec); - // set_disk_ro(sdkp->disk, sc->readonly); + blk_queue_hardsect_size(disk->queue, lun->capacity.bsize); + set_capacity(disk, lun->capacity.nsec); + // set_disk_ro(sdkp->disk, lun->readonly); return 0; } @@ -1626,9 +1626,9 @@ static int ub_bd_revalidate(struct gendisk *disk) */ static int ub_bd_media_changed(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; - if (!sc->removable) + if (!lun->removable) return 0; /* @@ -1640,12 +1640,12 @@ static int ub_bd_media_changed(struct gendisk *disk) * will fail, then block layer discards the data. Since we never * spin drives up, such devices simply cannot be used with ub anyway. */ - if (ub_sync_tur(sc) != 0) { - sc->changed = 1; + if (ub_sync_tur(lun->udev, lun) != 0) { + lun->changed = 1; return 1; } - return sc->changed; + return lun->changed; } static struct block_device_operations ub_bd_fops = { @@ -1669,7 +1669,7 @@ static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * Test if the device has a check condition on it, synchronously. */ -static int ub_sync_tur(struct ub_dev *sc) +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun) { struct ub_scsi_cmd *cmd; enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) }; @@ -1688,6 +1688,7 @@ static int ub_sync_tur(struct ub_dev *sc) cmd->cdb_len = 6; cmd->dir = UB_DIR_NONE; cmd->state = UB_CMDST_INIT; + cmd->lun = lun; /* This may be NULL, but that's ok */ cmd->done = ub_probe_done; cmd->back = &compl; @@ -1718,7 +1719,8 @@ err_alloc: /* * Read the SCSI capacity synchronously (for probing). */ -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret) { struct ub_scsi_cmd *cmd; char *p; @@ -1743,6 +1745,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) cmd->state = UB_CMDST_INIT; cmd->data = p; cmd->len = 8; + cmd->lun = lun; cmd->done = ub_probe_done; cmd->back = &compl; @@ -1811,6 +1814,90 @@ static void ub_probe_timeout(unsigned long arg) complete(cop); } +/* + * Get number of LUNs by the way of Bulk GetMaxLUN command. + */ +static int ub_sync_getmaxlun(struct ub_dev *sc) +{ + int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; + unsigned char *p; + enum { ALLOC_SIZE = 1 }; + struct usb_ctrlrequest *cr; + struct completion compl; + struct timer_list timer; + int nluns; + int rc; + + init_completion(&compl); + + rc = -ENOMEM; + if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) + goto err_alloc; + *p = 55; + + cr = &sc->work_cr; + cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + cr->bRequest = US_BULK_GET_MAX_LUN; + cr->wValue = cpu_to_le16(0); + cr->wIndex = cpu_to_le16(ifnum); + cr->wLength = cpu_to_le16(1); + + usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe, + (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl); + sc->work_urb.transfer_flags = 0; + sc->work_urb.actual_length = 0; + sc->work_urb.error_count = 0; + sc->work_urb.status = 0; + + if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { + if (rc == -EPIPE) { + printk("%s: Stall at GetMaxLUN, using 1 LUN\n", + sc->name); /* P3 */ + } else { + printk(KERN_WARNING + "%s: Unable to submit GetMaxLUN (%d)\n", + sc->name, rc); + } + goto err_submit; + } + + init_timer(&timer); + timer.function = ub_probe_timeout; + timer.data = (unsigned long) &compl; + timer.expires = jiffies + UB_CTRL_TIMEOUT; + add_timer(&timer); + + wait_for_completion(&compl); + + del_timer_sync(&timer); + usb_kill_urb(&sc->work_urb); + + if (sc->work_urb.actual_length != 1) { + printk("%s: GetMaxLUN returned %d bytes\n", sc->name, + sc->work_urb.actual_length); /* P3 */ + nluns = 0; + } else { + if ((nluns = *p) == 55) { + nluns = 0; + } else { + /* GetMaxLUN returns the maximum LUN number */ + nluns += 1; + if (nluns > UB_MAX_LUNS) + nluns = UB_MAX_LUNS; + } + printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name, + *p, nluns); /* P3 */ + } + + kfree(p); + return nluns; + +err_submit: + kfree(p); +err_alloc: + return rc; +} + /* * Clear initial stalls. */ @@ -1897,8 +1984,8 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, } if (ep_in == NULL || ep_out == NULL) { - printk(KERN_NOTICE "%s: device %u failed endpoint check\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: failed endpoint check\n", + sc->name); return -EIO; } @@ -1921,8 +2008,7 @@ static int ub_probe(struct usb_interface *intf, const struct usb_device_id *dev_id) { struct ub_dev *sc; - request_queue_t *q; - struct gendisk *disk; + int nluns; int rc; int i; @@ -1931,6 +2017,7 @@ static int ub_probe(struct usb_interface *intf, goto err_core; memset(sc, 0, sizeof(struct ub_dev)); spin_lock_init(&sc->lock); + INIT_LIST_HEAD(&sc->luns); usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); @@ -1942,19 +2029,16 @@ static int ub_probe(struct usb_interface *intf, ub_init_completion(&sc->work_done); sc->work_done.done = 1; /* A little yuk, but oh well... */ - rc = -ENOSR; - if ((sc->id = ub_id_get()) == -1) - goto err_id; - snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a'); - sc->dev = interface_to_usbdev(intf); sc->intf = intf; // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - usb_set_intfdata(intf, sc); usb_get_dev(sc->dev); // usb_get_intf(sc->intf); /* Do we need this? */ + snprintf(sc->name, 12, DRV_NAME "(%d.%d)", + sc->dev->bus->busnum, sc->dev->devnum); + /* XXX Verify that we can handle the device (from descriptors) */ ub_get_pipes(sc, sc->dev, intf); @@ -1992,35 +2076,88 @@ static int ub_probe(struct usb_interface *intf, * In any case it's not our business how revaliadation is implemented. */ for (i = 0; i < 3; i++) { /* Retries for benh's key */ - if ((rc = ub_sync_tur(sc)) <= 0) break; + if ((rc = ub_sync_tur(sc, NULL)) <= 0) break; if (rc != 0x6) break; msleep(10); } - sc->removable = 1; /* XXX Query this from the device */ - sc->changed = 1; /* ub_revalidate clears only */ - sc->first_open = 1; + nluns = 1; + for (i = 0; i < 3; i++) { + if ((rc = ub_sync_getmaxlun(sc)) < 0) { + /* + * Some devices (i.e. Iomega Zip100) need this -- + * apparently the bulk pipes get STALLed when the + * GetMaxLUN request is processed. + * XXX I have a ZIP-100, verify it does this. + */ + if (rc == -EPIPE) { + ub_probe_clear_stall(sc, sc->recv_bulk_pipe); + ub_probe_clear_stall(sc, sc->send_bulk_pipe); + } + break; + } + if (rc != 0) { + nluns = rc; + break; + } + mdelay(100); + } - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize); + for (i = 0; i < nluns; i++) { + ub_probe_lun(sc, i); + } + return 0; + + /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ +err_diag: + usb_set_intfdata(intf, NULL); + // usb_put_intf(sc->intf); + usb_put_dev(sc->dev); + kfree(sc); +err_core: + return rc; +} + +static int ub_probe_lun(struct ub_dev *sc, int lnum) +{ + struct ub_lun *lun; + request_queue_t *q; + struct gendisk *disk; + int rc; + + rc = -ENOMEM; + if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL) + goto err_alloc; + memset(lun, 0, sizeof(struct ub_lun)); + lun->num = lnum; + + rc = -ENOSR; + if ((lun->id = ub_id_get()) == -1) + goto err_id; + + lun->udev = sc; + list_add(&lun->link, &sc->luns); + + snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)", + lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num); + + lun->removable = 1; /* XXX Query this from the device */ + lun->changed = 1; /* ub_revalidate clears only */ + lun->first_open = 1; + ub_revalidate(sc, lun); - /* - * Just one disk per sc currently, but maybe more. - */ rc = -ENOMEM; if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL) goto err_diskalloc; - sc->disk = disk; - sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a'); - sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a'); + lun->disk = disk; + sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); + sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a'); disk->major = UB_MAJOR; - disk->first_minor = sc->id * UB_MINORS_PER_MAJOR; + disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; disk->fops = &ub_bd_fops; - disk->private_data = sc; - disk->driverfs_dev = &intf->dev; + disk->private_data = lun; + disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */ rc = -ENOMEM; if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL) @@ -2028,28 +2165,17 @@ static int ub_probe(struct usb_interface *intf, disk->queue = q; - // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); + blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); blk_queue_max_hw_segments(q, UB_MAX_REQ_SG); blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); - // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); + blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ blk_queue_max_sectors(q, UB_MAX_SECTORS); - blk_queue_hardsect_size(q, sc->capacity.bsize); + blk_queue_hardsect_size(q, lun->capacity.bsize); - /* - * This is a serious infraction, caused by a deficiency in the - * USB sg interface (usb_sg_wait()). We plan to remove this once - * we get mileage on the driver and can justify a change to USB API. - * See blk_queue_bounce_limit() to understand this part. - * - * XXX And I still need to be aware of the DMA mask in the HC. - */ - q->bounce_pfn = blk_max_low_pfn; - q->bounce_gfp = GFP_NOIO; + q->queuedata = lun; - q->queuedata = sc; - - set_capacity(disk, sc->capacity.nsec); - if (sc->removable) + set_capacity(disk, lun->capacity.nsec); + if (lun->removable) disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); @@ -2059,22 +2185,20 @@ static int ub_probe(struct usb_interface *intf, err_blkqinit: put_disk(disk); err_diskalloc: - device_remove_file(&sc->intf->dev, &dev_attr_diag); -err_diag: - usb_set_intfdata(intf, NULL); - // usb_put_intf(sc->intf); - usb_put_dev(sc->dev); - ub_id_put(sc->id); + list_del(&lun->link); + ub_id_put(lun->id); err_id: - kfree(sc); -err_core: + kfree(lun); +err_alloc: return rc; } static void ub_disconnect(struct usb_interface *intf) { struct ub_dev *sc = usb_get_intfdata(intf); - struct gendisk *disk = sc->disk; + struct list_head *p; + struct ub_lun *lun; + struct gendisk *disk; unsigned long flags; /* @@ -2124,14 +2248,18 @@ static void ub_disconnect(struct usb_interface *intf) /* * Unregister the upper layer. */ - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - /* - * I wish I could do: - * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); - * As it is, we rely on our internal poisoning and let - * the upper levels to spin furiously failing all the I/O. - */ + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + disk = lun->disk; + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + /* + * I wish I could do: + * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); + * As it is, we rely on our internal poisoning and let + * the upper levels to spin furiously failing all the I/O. + */ + } /* * Taking a lock on a structure which is about to be freed @@ -2182,8 +2310,8 @@ static int __init ub_init(void) { int rc; - /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n", - sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev)); + /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n", + sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun)); if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0) goto err_regblkdev; From d7771a33bf2b23fc6d0b9c133fb0c00670154f10 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 May 2005 18:49:59 +0200 Subject: [PATCH 22/42] [PATCH] USB: remove drivers/usb/media/pwc/ChangeLog This patch removes the outdated ChangeLog file for this driver. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/pwc/ChangeLog | 143 -------------------------------- 1 file changed, 143 deletions(-) delete mode 100644 drivers/usb/media/pwc/ChangeLog diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog deleted file mode 100644 index b2eb71a9afb5..000000000000 --- a/drivers/usb/media/pwc/ChangeLog +++ /dev/null @@ -1,143 +0,0 @@ -9.0.2 - -* Adding #ifdef to compile PWC before and after 2.6.5 - -9.0.1 - -9.0 - - -8.12 - -* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere. - -8.11.1 - -* Fix for PCVC720/40, would not be able to set videomode -* Fix for Samsung MPC models, appearantly they are based on a newer chipset - -8.11 - -* 20 dev_hints (per request) -* Hot unplugging should be better, no more dangling pointers or memory leaks -* Added reserved Logitech webcam IDs -* Device now remembers size & fps between close()/open() -* Removed palette stuff altogether - -8.10.1 - -* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro - -8.10 - -* Fixed ID for QuickCam Notebook pro -* Added GREALSIZE ioctl() call -* Fixed bug in case PWCX was not loaded and invalid size was set - -8.9 - -* Merging with kernel 2.5.49 -* Adding IDs for QuickCam Zoom & QuickCam Notebook - -8.8 - -* Fixing 'leds' parameter -* Adding IDs for Logitech QuickCam Pro 4000 -* Making URB init/cleanup a little nicer - -8.7 - -* Incorporating changes in ioctl() parameter passing -* Also changes to URB mechanism - -8.6 - -* Added ID's for Visionite VCS UM100 and UC300 -* Removed YUV420-interlaced palette altogether (was confusing) -* Removed MIRROR stuff as it didn't work anyway -* Fixed a problem with the 'leds' parameter (wouldn't blink) -* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s, - CONTOUR, BACKLIGHT, FLICKER, DYNNOISE. -* VIDIOCGCAP.name now contains real camera model name instead of - 'Philips xxx webcam' -* Added PROBE ioctl (see previous point & API doc) - -8.5 - -* Adding IDs for Creative Labs Webcam 5 -* Adding IDs for SOTEC CMS-001 webcam -* Solving possible hang in VIDIOCSYNC when unplugging the cam -* Forgot to return structure in VIDIOCPWCGAWB, oops -* Time interval for the LEDs are now in milliseconds - -8.4 - -* Fixing power_save option for Vesta range -* Handling new error codes in ISOC callback -* Adding dev_hint module parameter, to specify /dev/videoX device nodes - -8.3 - -* Adding Samsung C10 and C30 cameras -* Removing palette module parameter -* Fixed typo in ID of QuickCam 3000 Pro -* Adding LED settings (blinking while in use) for ToUCam cameras. -* Turns LED off when camera is not in use. - -8.2 - -* Making module more silent when trace = 0 -* Adding QuickCam 3000 Pro IDs -* Chrominance control for the Vesta cameras -* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM -* Included Oliver Neukem's lock_kernel() patch -* Allocates less memory for image buffers -* Adds ioctl()s for the whitebalancing - -8.1 - -* Adding support for 750 -* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls - -8.0 -* 'damage control' after inclusion in 2.4.5. -* Changed wait-queue mechanism in read/mmap/poll according to the book. -* Included YUV420P palette. -* Changed interface to decompressor module. -* Cleaned up pwc structure a bit. - -7.0 - -* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned. -* There is now a clear error message when an image size is selected that - is only supported using the decompressor, and the decompressor isn't - loaded. -* When the decompressor wasn't loaded, selecting large image size - would create skewed or double images. - -6.3 - -* Introduced spinlocks for the buffer pointer manipulation; a number of - reports seem to suggest the down()/up() semaphores were the cause of - lockups, since they are not suitable for interrupt/user locking. -* Separated decompressor and core code into 2 modules. - -6.2 - -* Non-integral image sizes are now padded with gray or black. -* Added SHUTTERSPEED ioctl(). -* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error, - even though the call succeeded. -* Added hotplug support for 2.4.*. -* Memory: the 645/646 uses less memory now. - -6.1 - -* VIDIOCSPICT returns -EINVAL with invalid palettes. -* Added saturation control. -* Split decompressors from rest. -* Fixed bug that would reset the framerate to the default framerate if - the rate field was set to 0 (which is not what I intended, nl. do not - change the framerate!). -* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately. -* Workaround for a bug in the 730 sensor. From 5ce0482e18193a15223911515ee44373cffb35b8 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 5 May 2005 15:12:57 -0700 Subject: [PATCH 23/42] [PATCH] USB: add new wacom device to usb hid-core list - add Intuos3 and Cintiq 21UX Signed-off-by: Ping Cheng Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 869ff73690ac..d972cb4cb19c 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1315,6 +1315,8 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_INTUOS2 0x0040 #define USB_DEVICE_ID_WACOM_VOLITO 0x0060 #define USB_DEVICE_ID_WACOM_PTU 0x0003 +#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 +#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 @@ -1481,6 +1483,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, From dc1d1003e8309ef8e5153ce0c00cce76144abbdb Mon Sep 17 00:00:00 2001 From: Lonnie Mendez Date: Tue, 10 May 2005 00:17:17 -0500 Subject: [PATCH 24/42] [PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table This patch adds the DeLorme Earthmate lt-20 productid to the hid blacklist table. This patch ensures the lt-20 can be claimed by the appropriate driver (cypress_m8). Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid blacklist table. Signed-off-by: Lonnie Mendez Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index d972cb4cb19c..b6e061af3e32 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1403,6 +1403,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 +#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 @@ -1439,6 +1440,7 @@ static struct hid_blacklist { { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, From 4871d3be13ea2b33edc9ba6fbcc30fc047087be7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 2 Jun 2005 22:18:12 -0700 Subject: [PATCH 25/42] [PATCH] USB: add Vernier devices to HID blacklist They aren't really HID devices. Damm microsoft HID driver, that thing has caused more companies to have to do this kind of hack... Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index b6e061af3e32..2d8bd9dcc6ed 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1415,6 +1415,12 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_BTC 0x046e #define USB_DEVICE_ID_BTC_KEYBOARD 0x5303 +#define USB_VENDOR_ID_VERNIER 0x08f7 +#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 +#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 +#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 +#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 + /* * Alphabetically sorted blacklist by quirk type. @@ -1460,6 +1466,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE }, From 58cfe9113e485f7e04bd0eac4fc4251b330af501 Mon Sep 17 00:00:00 2001 From: Matthias Urlichs Date: Mon, 23 May 2005 17:00:48 -0700 Subject: [PATCH 26/42] [PATCH] USB: add Option Card driver This patch adds a new driver for "Option" cards. This is a GSM data card, controlled by three "serial ports" which are connected via an OHCI adapter, all located on an oversized PC-Card. It's sold by several GSM service providers. Traditionally, this card has been accessed via the standard serial driver and appropriate vendor= and product= options. However, testing has revealed several problems with this approach, including hung data transfers and lost data blocks when receiving. Therefore, I've written a separate driver. Signed-off-by: Matthias Urlichs Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 11 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/option.c | 729 ++++++++++++++++++++++++++++++++++++ 3 files changed, 741 insertions(+) create mode 100644 drivers/usb/serial/option.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index bc798edf0358..9438909e87a5 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM To compile this driver as a module, choose M here: the module will be called keyspan_pda. +config USB_SERIAL_OPTION + tristate "USB Option PCMCIA serial driver" + depends on USB_SERIAL && USB_OHCI_HCD && PCCARD + help + Say Y here if you want to use an Option card. This is a + GSM card, controlled by three serial ports which are connected + via an OHCI adapter located on a PC card. + + To compile this driver as a module, choose M here: the + module will be called option. + config USB_SERIAL_OMNINET tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index d56ff6d86cce..6c7cdcc99a9e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o +obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c new file mode 100644 index 000000000000..b722175f108f --- /dev/null +++ b/drivers/usb/serial/option.c @@ -0,0 +1,729 @@ +/* + Option Card (PCMCIA to) USB to Serial Driver + + Copyright (C) 2005 Matthias Urlichs + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings + + History: + + 2005-05-19 v0.1 Initial version, based on incomplete docs + and analysis of misbehavior of the standard driver + 2005-05-20 v0.2 Extended the input buffer to avoid losing + random 64-byte chunks of data + 2005-05-21 v0.3 implemented chars_in_buffer() + turned on low_latency + simplified the code somewhat +*/ +#define DRIVER_VERSION "v0.3" +#define DRIVER_AUTHOR "Matthias Urlichs " +#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver" + +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" + +/* Function prototypes */ +static int option_open (struct usb_serial_port *port, struct file *filp); +static void option_close (struct usb_serial_port *port, struct file *filp); +static int option_startup (struct usb_serial *serial); +static void option_shutdown (struct usb_serial *serial); +static void option_rx_throttle (struct usb_serial_port *port); +static void option_rx_unthrottle (struct usb_serial_port *port); +static int option_write_room (struct usb_serial_port *port); + +static void option_instat_callback(struct urb *urb, struct pt_regs *regs); + + +static int option_write (struct usb_serial_port *port, + const unsigned char *buf, int count); + +static int option_chars_in_buffer (struct usb_serial_port *port); +static int option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg); +static void option_set_termios (struct usb_serial_port *port, + struct termios *old); +static void option_break_ctl (struct usb_serial_port *port, int break_state); +static int option_tiocmget (struct usb_serial_port *port, struct file *file); +static int option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear); +static int option_send_setup (struct usb_serial_port *port); + +/* Vendor and product IDs */ +#define OPTION_VENDOR_ID 0x0AF0 + +#define OPTION_PRODUCT_OLD 0x5000 +#define OPTION_PRODUCT_WLAN 0x6000 + +static struct usb_device_id option_ids[] = { + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, option_ids); + +static struct usb_driver option_driver = { + .owner = THIS_MODULE, + .name = "option", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = option_ids, +}; + +/* The card has three separate interfaces, wich the serial driver + * recognizes separately, thus num_port=1. + */ +static struct usb_serial_device_type option_3port_device = { + .owner = THIS_MODULE, + .name = "Option 3-port card", + .short_name = "option", + .id_table = option_ids, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, /* 3 */ + .open = option_open, + .close = option_close, + .write = option_write, + .write_room = option_write_room, + .chars_in_buffer = option_chars_in_buffer, + .throttle = option_rx_throttle, + .unthrottle = option_rx_unthrottle, + .ioctl = option_ioctl, + .set_termios = option_set_termios, + .break_ctl = option_break_ctl, + .tiocmget = option_tiocmget, + .tiocmset = option_tiocmset, + .attach = option_startup, + .shutdown = option_shutdown, + .read_int_callback = option_instat_callback, +}; + +static int debug; + +/* per port private data */ + +#define N_IN_URB 4 +#define N_OUT_URB 1 +#define IN_BUFLEN 1024 +#define OUT_BUFLEN 1024 + +struct option_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + char in_buffer[N_IN_URB][IN_BUFLEN]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + char out_buffer[N_OUT_URB][OUT_BUFLEN]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + // int break_on; + + unsigned long tx_start_time[N_OUT_URB]; +}; + + +/* Functions used by new usb-serial code. */ +static int __init +option_init (void) +{ + int retval; + retval = usb_serial_register(&option_3port_device); + if (retval) + goto failed_3port_device_register; + retval = usb_register(&option_driver); + if (retval) + goto failed_driver_register; + + info(DRIVER_DESC ": " DRIVER_VERSION); + + return 0; + +failed_driver_register: + usb_serial_deregister (&option_3port_device); +failed_3port_device_register: + return retval; +} + +static void __exit +option_exit (void) +{ + usb_deregister (&option_driver); + usb_serial_deregister (&option_3port_device); +} + +module_init(option_init); +module_exit(option_exit); + +static void +option_rx_throttle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_rx_unthrottle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_break_ctl (struct usb_serial_port *port, int break_state) +{ + /* Unfortunately, I don't know how to send a break */ + dbg("%s", __FUNCTION__); +} + + +static void +option_set_termios (struct usb_serial_port *port, + struct termios *old_termios) +{ + dbg("%s", __FUNCTION__); + + option_send_setup(port); +} + +static int +option_tiocmget(struct usb_serial_port *port, struct file *file) +{ + unsigned int value; + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int +option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return option_send_setup(port); +} + +static int +option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +/* Write */ +static int +option_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct option_port_private *portdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + + portdata = usb_get_serial_port_data(port); + + dbg("%s: write (%d chars)", __FUNCTION__, count); + +#if 0 + spin_lock(&port->lock); + if (port->write_urb_busy) { + spin_unlock(&port->lock); + dbg("%s: already writing", __FUNCTION__); + return 0; + } + port->write_urb_busy = 1; + spin_unlock(&port->lock); +#endif + + i = 0; + left = count; + while (left>0) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + for (;i < N_OUT_URB; i++) { + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = portdata->out_urbs[i]; + if (this_urb->status != -EINPROGRESS) + break; + if (this_urb->transfer_flags & URB_ASYNC_UNLINK) + continue; + if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ)) + continue; + this_urb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(this_urb); + } + + if (i == N_OUT_URB) { + /* no bulk out free! */ + dbg("%s: no output urb -- left %d", __FUNCTION__,count-left); +#if 0 + port->write_urb_busy = 0; +#endif + return count-left; + } + + dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i); + + memcpy (this_urb->transfer_buffer, buf, todo); + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo; + + this_urb->transfer_flags &= ~URB_ASYNC_UNLINK; + this_urb->dev = port->serial->dev; + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status); + continue; + } + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; +#if 0 + port->write_urb_busy = 0; +#endif + dbg("%s: wrote (did %d)", __FUNCTION__, count); + return count; +} + +static void +option_indat_callback (struct urb *urb, struct pt_regs *regs) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + + dbg("%s: %p", __FUNCTION__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); + port = (struct usb_serial_port *) urb->context; + + if (urb->status) { + dbg("%s: nonzero status: %d on endpoint %02x.", + __FUNCTION__, urb->status, endpoint); + } else { + tty = port->tty; + if (urb->actual_length) { + for (i = 0; i < urb->actual_length ; ++i) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + tty_insert_flip_char(tty, data[i], 0); + } + tty_flip_buffer_push(tty); + } else { + dbg("%s: empty read urb received", __FUNCTION__); + } + + /* Resubmit urb so we continue receiving */ + if (port->open_count && urb->status != -ESHUTDOWN) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err); + } + } + return; +} + +static void +option_outdat_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port; + + dbg("%s", __FUNCTION__); + + port = (struct usb_serial_port *) urb->context; + + if (port->open_count) + schedule_work(&port->work); +} + +static void +option_instat_callback (struct urb *urb, struct pt_regs *regs) +{ + int err; + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dbg("%s", __FUNCTION__); + dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + + if (urb->status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dbg("%s: NULL req_pkt\n", __FUNCTION__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); + + dbg("%s: signal x%x", __FUNCTION__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (port->tty && !C_CLOCAL(port->tty) + && old_dcd_state && !portdata->dcd_state) { + tty_hangup(port->tty); + } + } else + dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest); + } else + dbg("%s: error %d", __FUNCTION__, urb->status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (urb->status != -ESHUTDOWN) { + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err); + } +} + + +static int +option_write_room (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status != -EINPROGRESS) + data_len += OUT_BUFLEN; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_chars_in_buffer (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status == -EINPROGRESS) + data_len += this_urb->transfer_buffer_length; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_open (struct usb_serial_port *port, struct file *filp) +{ + struct option_port_private *portdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (! urb) + continue; + if (urb->dev != serial->dev) { + dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev); + continue; + } + + /* make sure endpoint data toggle is synchronized with the device */ + + usb_clear_halt(urb->dev, urb->pipe); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err, + urb->transfer_buffer_length); + } + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < N_OUT_URB; i++) { + urb = portdata->out_urbs[i]; + if (! urb) + continue; + urb->dev = serial->dev; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ + } + + port->tty->low_latency = 1; + + option_send_setup(port); + + return (0); +} + +static inline void +stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) { + urb->transfer_flags &= ~URB_ASYNC_UNLINK; + usb_kill_urb(urb); + } +} + +static void +option_close(struct usb_serial_port *port, struct file *filp) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + + if (serial->dev) { + option_send_setup(port); + + /* Stop reading/writing urbs */ + for (i = 0; i < N_IN_URB; i++) + stop_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + stop_urb(portdata->out_urbs[i]); + } + port->tty = NULL; +} + + +/* Helper functions used by option_setup_urbs */ +static struct urb * +option_setup_urb (struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *, struct pt_regs *regs)) +{ + struct urb *urb; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (urb == NULL) { + dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + return NULL; + } + + /* Fill URB using supplied data. */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +/* Setup urbs */ +static void +option_setup_urbs(struct usb_serial *serial) +{ + int j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + port = serial->port[0]; + portdata = usb_get_serial_port_data(port); + + /* Do indat endpoints first */ + for (j = 0; j <= N_IN_URB; ++j) { + portdata->in_urbs[j] = option_setup_urb (serial, + port->bulk_in_endpointAddress, USB_DIR_IN, port, + portdata->in_buffer[j], IN_BUFLEN, option_indat_callback); + } + + /* outdat endpoints */ + for (j = 0; j <= N_OUT_URB; ++j) { + portdata->out_urbs[j] = option_setup_urb (serial, + port->bulk_out_endpointAddress, USB_DIR_OUT, port, + portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback); + } +} + + +static int +option_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + portdata = usb_get_serial_port_data(port); + + if (port->tty) { + int val = 0; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT); + } + + return 0; +} + + +static int +option_startup (struct usb_serial *serial) +{ + int i, err; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL); + if (!portdata) { + dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i); + return (1); + } + memset(portdata, 0, sizeof(struct option_port_private)); + + usb_set_serial_port_data(port, portdata); + + if (! port->interrupt_in_urb) + continue; + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) + dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err); + } + + option_setup_urbs(serial); + + return (0); +} + +static void +option_shutdown (struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + stop_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + stop_urb(portdata->out_urbs[j]); + } + + /* Now free them */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + for (j = 0; j < N_IN_URB; j++) { + if (portdata->in_urbs[j]) { + usb_free_urb(portdata->in_urbs[j]); + portdata->in_urbs[j] = NULL; + } + } + for (j = 0; j < N_OUT_URB; j++) { + if (portdata->out_urbs[j]) { + usb_free_urb(portdata->out_urbs[j]); + portdata->out_urbs[j] = NULL; + } + } + } + + /* Now free per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + } +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages"); + From 77ddecc3c047e4e9bd7332d3173def93ea2de1ad Mon Sep 17 00:00:00 2001 From: Paulo Marques Date: Wed, 18 May 2005 13:12:49 +0100 Subject: [PATCH 27/42] [PATCH] USB: make MODALIAS code a bit smaller devices This patch makes the code to provide modalias in sysfs for usb devices 56 bytes smaller in i386, while making it clear that the first part of the modalias string is the same no matter what the device class is. Signed-Off-By: Paulo Marques Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4ab50009291d..4d0c9e65cd03 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -290,32 +290,30 @@ static ssize_t show_modalias(struct device *dev, char *buf) { struct usb_interface *intf; struct usb_device *udev; + int len; intf = to_usb_interface(dev); udev = interface_to_usbdev(intf); - if (udev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; - return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - le16_to_cpu(udev->descriptor.bcdDevice), - udev->descriptor.bDeviceClass, - udev->descriptor.bDeviceSubClass, - udev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol); - } else { - return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n", + len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), le16_to_cpu(udev->descriptor.bcdDevice), udev->descriptor.bDeviceClass, udev->descriptor.bDeviceSubClass, udev->descriptor.bDeviceProtocol); - } + buf += len; + if (udev->descriptor.bDeviceClass == 0) { + struct usb_host_interface *alt = intf->cur_altsetting; + + return len + sprintf(buf, "%02Xisc%02Xip%02X\n", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol); + } else { + return len + sprintf(buf, "*isc*ip*\n"); + } } static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); From 1724757e5ab5219b46876ac6e4e362a4b2dcfa86 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sat, 21 May 2005 00:45:55 -0700 Subject: [PATCH 28/42] [PATCH] USB Storage: Add unusual_devs for Trumpion Voice Recorder The original entry of this patch was submitted by Filippo Bardelli , with cleanups and patch-ification by me. This corrects the subclass that the device reports. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d2891f475793..9fcc7bd1fbe4 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -862,6 +862,15 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), +/* Reported by Filippo Bardelli + * The device reports a subclass of RBC, which is wrong. + */ +UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, + "Trumpion Microelectronics, Inc.", + "33520 USB Digital Voice Recorder", + US_SC_UFI, US_PR_DEVICE, NULL, + 0), + /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", From 719df469cb51199316ae2a11c75a8046be34b899 Mon Sep 17 00:00:00 2001 From: Roman Kagan Date: Fri, 6 May 2005 00:55:56 +0400 Subject: [PATCH 29/42] [PATCH] USB: update urb documentation On Wed, May 04, 2005 at 01:37:30PM -0700, David Brownell wrote: > On Wednesday 04 May 2005 12:19 pm, Roman Kagan wrote: > > struct urb { > > /* private, usb core and host controller only fields in the urb */ > > ... > > struct list_head urb_list; /* list pointer to all active urbs */ > > ... > > }; > > > > Is it safe to use it for driver's purposes when the driver owns the urb, > > that is, starting from the completion routine until the urb is submitted > > with usb_submit_urb()? > > Right now, it should be. Great! FWIW I've briefly tested a modified version of usbatm using the list head in struct urb instead of creating a wrapper struct, and I haven't seen any failures yet. So I tend to believe that your "should be" actually means "is" :) > > If it is, can it be guaranteed in future, e.g. > > by moving the list head into the public section of struct urb? > > In fact I'm not sure why it ever got called "private" to usbcore/hcds. > I thought the idea was that it should be like urb->status, reserved for > whoever controls the URB. OK then how about the following (essentially documentation) patch? Signed-off-by: Roman Kagan Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/usb.h b/include/linux/usb.h index 41d1a644c9d4..2d1ac5058534 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -796,6 +796,10 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *); * of the iso_frame_desc array, and the number of errors is reported in * error_count. Completion callbacks for ISO transfers will normally * (re)submit URBs to ensure a constant transfer rate. + * + * Note that even fields marked "public" should not be touched by the driver + * when the urb is owned by the hcd, that is, since the call to + * usb_submit_urb() till the entry into the completion routine. */ struct urb { @@ -803,12 +807,12 @@ struct urb struct kref kref; /* reference count of the URB */ spinlock_t lock; /* lock for the URB */ void *hcpriv; /* private data for host controller */ - struct list_head urb_list; /* list pointer to all active urbs */ int bandwidth; /* bandwidth for INT/ISO request */ atomic_t use_count; /* concurrent submissions counter */ u8 reject; /* submissions will fail */ /* public, documented fields in the urb that can be used by drivers */ + struct list_head urb_list; /* list head for use by the urb owner */ struct usb_device *dev; /* (in) pointer to associated device */ unsigned int pipe; /* (in) pipe information */ int status; /* (return) non-ISO status */ From 39a66b8d22a36cfa1a48f7f59c6a4639d9c99653 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Fri, 27 May 2005 00:09:56 +0100 Subject: [PATCH 30/42] [PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 379 +++++++++++++++++++++++++++--------- 1 file changed, 283 insertions(+), 96 deletions(-) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 7e9bb63eb466..4ace9964fc6b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -7,6 +7,14 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + * Outstanding Issues: + * Buffers are not flushed when the port is opened. + * Multiple calls to write() may fail with "Resource temporarily unavailable" + * */ #include @@ -24,7 +32,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.03" +#define DRIVER_VERSION "v0.04" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*); static void cp2101_close(struct usb_serial_port*, struct file*); static void cp2101_get_termios(struct usb_serial_port*); static void cp2101_set_termios(struct usb_serial_port*, struct termios*); +static int cp2101_tiocmget (struct usb_serial_port *, struct file *); +static int cp2101_tiocmset (struct usb_serial_port *, struct file *, + unsigned int, unsigned int); static void cp2101_break_ctl(struct usb_serial_port*, int); static int cp2101_startup (struct usb_serial *); static void cp2101_shutdown(struct usb_serial*); @@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*); static int debug; static struct usb_device_id id_table [] = { - {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/ - {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/ - { } /* Terminating Entry*/ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE (usb, id_table); @@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = { .close = cp2101_close, .break_ctl = cp2101_break_ctl, .set_termios = cp2101_set_termios, + .tiocmget = cp2101_tiocmget, + .tiocmset = cp2101_tiocmset, .attach = cp2101_startup, .shutdown = cp2101_shutdown, }; -/*Config request types*/ +/* Config request types */ #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/*Config SET requests. To GET, add 1 to the request number*/ -#define CP2101_UART 0x00 /*Enable / Disable*/ -#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/ -#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/ -#define CP2101_BREAK 0x05 /*On / Off*/ -#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/ -#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/ -#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/ +/* Config SET requests. To GET, add 1 to the request number */ +#define CP2101_UART 0x00 /* Enable / Disable */ +#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ +#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ +#define CP2101_BREAK 0x05 /* On / Off */ +#define CP2101_CONTROL 0x07 /* Flow control line states */ +#define CP2101_MODEMCTL 0x13 /* Modem controls */ +#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ -/*CP2101_UART*/ +/* CP2101_UART */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/*CP2101_BAUDRATE*/ +/* CP2101_BAUDRATE */ #define BAUD_RATE_GEN_FREQ 0x384000 -/*CP2101_BITS*/ +/* CP2101_BITS */ #define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 #define BITS_DATA_7 0X0700 #define BITS_DATA_8 0X0800 @@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = { #define BITS_STOP_1 0x0000 #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 + +/* CP2101_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 +/* CP2101_CONTROL */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 -static int cp2101_get_config(struct usb_serial_port* port, u8 request) +/* + * cp2101_get_config + * Reads from the CP2101 configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp2101_get_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - unsigned char buf[4]; - unsigned int value; - int result, i; + u32 *buf; + int result, i, length; - /*For get requests, the request number must be incremented*/ + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc (length * sizeof(u32), GFP_KERNEL); + memset(buf, 0, length * sizeof(u32)); + + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + return -ENOMEM; + } + + /* For get requests, the request number must be incremented */ request++; - /*Issue the request, attempting to read 4 bytes*/ + /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, - 0, buf, 4, 300); + 0, buf, size, 300); - if (result < 0) { + /* Convert data into an array of integers */ + for (i=0; idev, "%s - Unable to send config request, " - "request=0x%x result=%d\n", - __FUNCTION__, request, result); - return result; + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; } - /*Assemble each byte read into an integer value*/ - value = 0; - for (i=0; i<4 && iserial; - int result; - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, value, - 0, NULL, 0, 300); - - if (result <0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x value=0x%x result=%d\n", - __FUNCTION__, request, value, result); - return result; - } - - dbg(" %s - request=0x%x value=0x%x result=%d", - __FUNCTION__, request, value, result); - return 0; } +/* + * cp2101_set_config + * Writes to the CP2101 configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp2101_set_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) +{ + struct usb_serial *serial = port->serial; + u32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc(length * sizeof(u32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, 0x0000, + 0, buf, size, 300); + } else { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); + } + + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dev_err(&port->dev, "%s - Unable to send request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } + + /* Single data value */ + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); + return 0; +} + +/* + * cp2101_set_config_single + * Convenience function for calling cp2101_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp2101_set_config_single(struct usb_serial_port* port, + u8 request, unsigned int data) +{ + return cp2101_set_config(port, request, &data, 2); +} + static int cp2101_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); - if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __FUNCTION__); return -EPROTO; @@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) return result; } - /*Configure the termios structure*/ + /* Configure the termios structure */ cp2101_get_termios(port); + /* Set the DTR and RTS pins low */ + cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0); + return 0; } @@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - cp2101_set_config(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); } -/* cp2101_get_termios*/ -/* Reads the baud rate, data bits, parity and stop bits from the device*/ -/* Corrects any unsupported values*/ -/* Configures the termios structure to reflect the state of the device*/ +/* + * cp2101_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ static void cp2101_get_termios (struct usb_serial_port *port) { - unsigned int cflag; + unsigned int cflag, modem_ctl[4]; int baud; int bits; @@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port) } cflag = port->tty->termios->c_cflag; - baud = cp2101_get_config(port, CP2101_BAUDRATE); - /*Convert to baudrate*/ + cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + /* Convert to baudrate */ if (baud) baud = BAUD_RATE_GEN_FREQ / baud; dbg("%s - baud rate = %d", __FUNCTION__, baud); cflag &= ~CBAUD; switch (baud) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Baud rate is not supported, " "using 9600 baud", __FUNCTION__); cflag |= B9600; - cp2101_set_config(port, CP2101_BAUDRATE, + cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ/9600)); break; } - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __FUNCTION__); + cflag |= CS5; + break; case BITS_DATA_6: dbg("%s - data bits = 6", __FUNCTION__); cflag |= CS6; @@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown number of data bits, " @@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " "disabling parity", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit)", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __FUNCTION__); @@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Unknown number of stop bits, " "using 1 stop bit", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + cflag |= CRTSCTS; + } else { + dbg("%s - flow control = NONE", __FUNCTION__); + cflag &= ~CRTSCTS; + } + port->tty->termios->c_cflag = cflag; } @@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag, old_cflag=0; - int baud=0; - int bits; + int baud=0, bits; + unsigned int modem_ctl[4]; dbg("%s - port %d", __FUNCTION__, port->number); @@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } cflag = port->tty->termios->c_cflag; - /* check that they really want us to change something */ + /* Check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) @@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, /* If the baud rate is to be updated*/ if ((cflag & CBAUD) != (old_cflag & CBAUD)) { switch (cflag & CBAUD) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (baud) { dbg("%s - Setting baud rate to %d baud", __FUNCTION__, baud); - if (cp2101_set_config(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) dev_err(&port->dev, "Baud rate requested not " "supported by device\n"); } } - /*If the number of data bits is to be updated*/ + /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __FUNCTION__); + break; case CS6: bits |= BITS_DATA_6; dbg("%s - data bits = 6", __FUNCTION__); @@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - parity = EVEN", __FUNCTION__); } } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __FUNCTION__); } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " "not supported by device\n"); } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dbg("%s - flow control = NONE", __FUNCTION__); + } + + dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + } + +} + +static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + int control = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dbg("%s - control = 0x%.4x", __FUNCTION__, control); + + return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + +} + +static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) +{ + int control, result; + + dbg("%s - port %d", __FUNCTION__, port->number); + + cp2101_get_config(port, CP2101_CONTROL, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dbg("%s - control = 0x%.2x", __FUNCTION__, control); + + return result; } static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { - u16 state; + int state; dbg("%s - port %d", __FUNCTION__, port->number); if (break_state == 0) @@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, state); + cp2101_set_config(port, CP2101_BREAK, &state, 2); } static int cp2101_startup (struct usb_serial *serial) { - /*CP2101 buffers behave strangely unless device is reset*/ + /* CP2101 buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } @@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial) dbg("%s", __FUNCTION__); - /* stop reads and writes on all ports */ + /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { cp2101_cleanup(serial->port[i]); } @@ -560,16 +747,16 @@ static int __init cp2101_init (void) retval = usb_serial_register(&cp2101_device); if (retval) - return retval; /*Failed to register*/ + return retval; /* Failed to register */ retval = usb_register(&cp2101_driver); if (retval) { - /*Failed to register*/ + /* Failed to register */ usb_serial_deregister(&cp2101_device); return retval; } - /*Success*/ + /* Success */ info(DRIVER_DESC " " DRIVER_VERSION); return 0; } From 18e144d32cd3dae6953c385e4b376ef9688b61b0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 27 May 2005 15:04:47 -0700 Subject: [PATCH 31/42] [SCSI] qla2xxx: fix bad locking during eh_abort Correct incorrect locking order in qla2xxx_eh_abort() handler which would case a hang during certain code-paths. With extra pieces to fix the irq state in the locks. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 579448222d69..3c97aa45772d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) int ret, i; unsigned int id, lun; unsigned long serial; + unsigned long flags; if (!CMD_SP(cmd)) return FAILED; @@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) /* Check active list for command command. */ spin_unlock_irq(ha->host->host_lock); - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; @@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) sp->state)); DEBUG3(qla2x00_print_scsi_cmd(cmd);) - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla2x00_abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); @@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "mbx success.\n", __func__, ha->host_no)); ret = SUCCESS; } - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); break; } + spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for the command to be returned. */ if (ret == SUCCESS) { - spin_unlock(&ha->hardware_lock); if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } - spin_lock(&ha->hardware_lock); } spin_lock_irq(ha->host->host_lock); @@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 0; @@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (cmd->device->id == t) { if (!qla2x00_eh_wait_on_command(ha, cmd)) { status = 1; @@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) } } } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); @@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 1; @@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); status = qla2x00_eh_wait_on_command(ha, cmd); if (status == 0) break; } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); From c92715b3c22e94105a8fd9e4a23047d05c5077e7 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Thu, 2 Jun 2005 17:15:09 -0500 Subject: [PATCH 32/42] [SCSI] fix slab corruption during ipr probe With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on pSeries machines with IPR adapters with any 2.6.12-rc kernel. The change which seems to have introduced the problem is "SCSI: revamp target scanning routines" and may be found at: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2 In order to revert that in a 2.6.12-rc1 tree, I had to revert "target code updates to support scanned targets" first: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2 With both patches reverted, the corruption messages go away. ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005) ipr 0001:d0:01.0: Found IOA with IRQ: 167 ipr 0001:d0:01.0: Starting IOA initialization sequence. ipr 0001:d0:01.0: Adapter firmware version: 020A005C ipr 0001:d0:01.0: IOA initialized. scsi0 : IBM 570B Storage Adapter Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 ... I did some digging and the problem seems to be a refcounting issue in __scsi_add_device. The target gets freed in scsi_target_reap, and then __scsi_add_device tries to do another device_put on it. Signed-off-by: Nathan Lynch Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index cca772624ae7..8d0d302844a1 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (!starget) return ERR_PTR(-ENOMEM); + get_device(&starget->dev); down(&shost->scan_mutex); res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); if (res != SCSI_SCAN_LUN_PRESENT) From f4d340cf869b2b63e1043eed72aa2eab6fa2cb2c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 3 Jun 2005 08:01:35 -0700 Subject: [PATCH 33/42] [PATCH] USB: resolve Zaurus problem This "obvious" one-liner is needed to recognize Zaurus SL 6000; it just checks two GUIDs not just one. OSDL bugids #4512 and #4545 seem to be duplicates of this report. From: Gerald Skerbitz Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/usb/net/usbnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 85476e76b244..4cbb408af727 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) } /* expect bcdVersion 1.0, ignore */ if (memcmp(&desc->bGUID, blan_guid, 16) - && memcmp(&desc->bGUID, blan_guid, 16) ) { + && memcmp(&desc->bGUID, safe_guid, 16) ) { /* hey, this one might _really_ be MDLM! */ dev_dbg (&intf->dev, "MDLM guid\n"); goto bad_desc; From b05a720b374ac6af05b2fd4c70bb2c61a9f461ca Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 3 Jun 2005 11:35:20 +1000 Subject: [PATCH 34/42] [PATCH] m68knommu: fix scheduling and race problems in idle loop Re-work the m68knommu specific idle code according to suggestions from Nick Piggin . A couple of rules that we need to follow: 1. Preempt should now disabled over idle routines. Should only be enabled to call schedule() then disabled again. 3. When cpu_idle finds (need_resched() == 'true'), it should call schedule(). It should not call schedule() otherwise. Also fix interrupt locking around the need_resched() and cpu stop state so that there is no race condition. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/process.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 2b6c9d32b7a6..c4a33f265dc0 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -45,11 +45,13 @@ asmlinkage void ret_from_fork(void); */ void default_idle(void) { - while(1) { - if (need_resched()) - __asm__("stop #0x2000" : : : "cc"); - schedule(); + local_irq_disable(); + while (!need_resched()) { + /* This stop will re-enable interrupts */ + __asm__("stop #0x2000" : : : "cc"); + local_irq_disable(); } + local_irq_enable(); } void (*idle)(void) = default_idle; @@ -63,7 +65,12 @@ void (*idle)(void) = default_idle; void cpu_idle(void) { /* endless idle loop with no priority at all */ - idle(); + while (1) { + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void machine_restart(char * __unused) From 8be3de3fd8469154a2b3e18a4712032dac5b4a53 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 3 Jun 2005 14:25:25 -0500 Subject: [PATCH 35/42] [PATCH] prom_find_machine_type typo breaks pSeries lpar boot A typo in prom_find_machine_type from Ben's recent patch "ppc64: Fix result code handling in prom_init" prevents pSeries LPAR systems from booting. Tested on a pSeries 570 and OpenPower 720 (both Power5 LPAR). Signed-off-by: Nathan Lynch Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/prom_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 1ac531ba7056..b7683abfbe6a 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1370,7 +1370,7 @@ static int __init prom_find_machine_type(void) } /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (!PHANDLE_VALID(rtas)) { + if (PHANDLE_VALID(rtas)) { int x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { prom_printf("Hypertas detected, assuming LPAR !\n"); From 854715be73b221596c7127d4042e1120d4539e19 Mon Sep 17 00:00:00 2001 From: Qu Fuping Date: Sat, 4 Jun 2005 15:43:29 -0700 Subject: [PATCH 36/42] [PATCH] mpage_end_io_write() I/O error handling fix When fsync() runs wait_on_page_writeback_range() it only inspects pages which are actually under I/O (PAGECACHE_TAG_WRITEBACK). If a page completed I/O prior to wait_on_page_writeback_range() looking at it, it is supposed to have recorded its I/O error state in the address_space. But mpage_mpage_end_io_write() forgot to set the address_space error flag in this case. Signed-off-by: Qu Fuping Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/mpage.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/mpage.c b/fs/mpage.c index b92c0e64aefa..bb9aebe93862 100644 --- a/fs/mpage.c +++ b/fs/mpage.c @@ -79,8 +79,11 @@ static int mpage_end_io_write(struct bio *bio, unsigned int bytes_done, int err) if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); - if (!uptodate) + if (!uptodate){ SetPageError(page); + if (page->mapping) + set_bit(AS_EIO, &page->mapping->flags); + } end_page_writeback(page); } while (bvec >= bio->bi_io_vec); bio_put(bio); From 778959db97c7ed8eed4025916916b17a4629ce3d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 4 Jun 2005 15:43:30 -0700 Subject: [PATCH 37/42] [PATCH] s390: ptrace peek and poke The special cases of peek and poke on acrs[15] and the fpc register are not handled correctly. A poke on acrs[15] will clobber the 4 bytes after the access registers in the thread_info structure. That happens to be the kernel stack pointer. A poke on the fpc with an invalid value is not caught by the validity check. On the next context switch the broken fpc value will cause a program check in the kernel. Improving the checks in peek and poke fixes this. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/ptrace.c | 48 +++++++++++++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 5 deletions(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 26889366929a..329d9391c83d 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -40,6 +40,7 @@ #include #include #include +#include #ifdef CONFIG_S390_SUPPORT #include "compat_ptrace.h" @@ -130,13 +131,19 @@ static int peek_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset, tmp; + addr_t offset, tmp, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb reading + * from acrs[15]. Result is a 64 bit value. Read the + * 32 bit acrs[15] value and shift it by 32. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + tmp = ((unsigned long) child->thread.acrs[15]) << 32; + else +#endif tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset); } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data) */ offset = addr - (addr_t) &dummy->regs.fp_regs; tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset); + if (addr == (addr_t) &dummy->regs.fp_regs.fpc) + tmp &= (unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32); } else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { /* @@ -191,13 +211,19 @@ static int poke_user(struct task_struct *child, addr_t addr, addr_t data) { struct user *dummy = NULL; - addr_t offset; + addr_t offset, mask; /* * Stupid gdb peeks/pokes the access registers in 64 bit with * an alignment of 4. Programmers from hell indeed... */ - if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK) + mask = __ADDR_MASK; +#ifdef CONFIG_ARCH_S390X + if (addr >= (addr_t) &dummy->regs.acrs && + addr < (addr_t) &dummy->regs.orig_gpr2) + mask = 3; +#endif + if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK) return -EIO; if (addr < (addr_t) &dummy->regs.acrs) { @@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * access registers are stored in the thread structure */ offset = addr - (addr_t) &dummy->regs.acrs; +#ifdef CONFIG_ARCH_S390X + /* + * Very special case: old & broken 64 bit gdb writing + * to acrs[15] with a 64 bit value. Ignore the lower + * half of the value and write the upper 32 bit to + * acrs[15]. Sick... + */ + if (addr == (addr_t) &dummy->regs.acrs[15]) + child->thread.acrs[15] = (unsigned int) (data >> 32); + else +#endif *(addr_t *)((addr_t) &child->thread.acrs + offset) = data; } else if (addr == (addr_t) &dummy->regs.orig_gpr2) { @@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) * floating point regs. are stored in the thread structure */ if (addr == (addr_t) &dummy->regs.fp_regs.fpc && - (data & ~FPC_VALID_MASK) != 0) + (data & ~((unsigned long) FPC_VALID_MASK + << (BITS_PER_LONG - 32))) != 0) return -EINVAL; offset = addr - (addr_t) &dummy->regs.fp_regs; *(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data; From c5c3a6d8fe923b8780b9cd10e72344b8cf8518b5 Mon Sep 17 00:00:00 2001 From: Bodo Stroesser Date: Sat, 4 Jun 2005 15:43:32 -0700 Subject: [PATCH 38/42] [PATCH] s390: uml ptrace fixes To make UML build and run on s390, I needed to do these two little changes: 1) UML includes some of the subarch's (s390) headers. I had to change one of them with the following one-liner, to make this compile. AFAICS, this change doesn't break compilation of s390 itself. 2) UML needs to intercept syscalls via ptrace to invalidate the syscall, read syscall's parameters and write the result with the result of UML's syscall processing. Also, UML needs to make sure, that the host does no syscall restart processing. On i386 for example, this can be done by writing -1 to orig_eax on the 2nd syscall interception (orig_eax is the syscall number, which after the interception is used as a "interrupt was a syscall" flag only. Unfortunately, s390 holds syscall number and syscall result in gpr2 and its "interrupt was a syscall" flag (trap) is unreachable via ptrace. So I changed the host to set trap to -1, if the syscall number is changed to an invalid value on the first syscall interception. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/ptrace.c | 7 +++++++ include/asm-s390/user.h | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 329d9391c83d..06afa3103ace 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -760,6 +760,13 @@ syscall_trace(struct pt_regs *regs, int entryexit) ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + /* + * If the debuffer has set an invalid system call number, + * we prepare to skip the system call restart handling. + */ + if (!entryexit && regs->gprs[2] >= NR_syscalls) + regs->trap = -1; + /* * this isn't the same as continuing with a signal, but it will do * for normal use. strace only continues with a signal if the diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h index c64f8c181df3..1dc74baf03c4 100644 --- a/include/asm-s390/user.h +++ b/include/asm-s390/user.h @@ -10,7 +10,7 @@ #define _S390_USER_H #include -#include +#include /* Core file format: The core file is written in such a way that gdb can understand it and provide useful information to the user (under linux we use the 'trad-core' bfd). There are quite a number of From 595bf2aacae96d0f87352a1ff5476b79e52e212f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 4 Jun 2005 15:43:32 -0700 Subject: [PATCH 39/42] [PATCH] s390: in_interrupt vs. in_atomic The condition for no context in do_exception checks for hard and soft interrupts by using in_interrupt() but not for preemption. This is bad for the users of __copy_from/to_user_inatomic because the fault handler might call schedule although the preemption count is != 0. Use in_atomic() instead in_interrupt(). Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 80306bc8c799..75fde949d125 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) * we are not in an interrupt and that there is a * user context. */ - if (user_address == 0 || in_interrupt() || !mm) + if (user_address == 0 || in_atomic() || !mm) goto no_context; /* From f26d583e41aedad8159acf9533fa287d7209dfbf Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Sat, 4 Jun 2005 15:43:33 -0700 Subject: [PATCH 40/42] [PATCH] s390: deadlock in appldata The system might hang when using appldata_mem with high I/O traffic and a large number of devices. The spinlocks bdev_lock and swaplock are acquired via calls to si_meminfo() and si_swapinfo() from a tasklet, i.e. interrupt context, which can lead to a deadlock. Replace tasklet with work queue. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/appldata/appldata_base.c | 72 +++++++++++++++------------ arch/s390/appldata/appldata_mem.c | 2 +- arch/s390/appldata/appldata_net_sum.c | 2 +- arch/s390/appldata/appldata_os.c | 4 +- 4 files changed, 45 insertions(+), 35 deletions(-) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 01ae1964c938..c067435bae45 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -28,6 +28,7 @@ //#include #include #include +#include #include "appldata.h" @@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL; static int appldata_timer_active; /* - * Tasklet + * Work queue */ -static struct tasklet_struct appldata_tasklet_struct; +static struct workqueue_struct *appldata_wq; +static void appldata_work_fn(void *data); +static DECLARE_WORK(appldata_work, appldata_work_fn, NULL); + /* * Ops list @@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock); static LIST_HEAD(appldata_ops_list); -/************************* timer, tasklet, DIAG ******************************/ +/*************************** timer, work, DIAG *******************************/ /* * appldata_timer_function() * - * schedule tasklet and reschedule timer + * schedule work and reschedule timer */ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) { @@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs) atomic_read(&appldata_expire_count)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule((struct tasklet_struct *) data); + queue_work(appldata_wq, (struct work_struct *) data); } } /* - * appldata_tasklet_function() + * appldata_work_fn() * * call data gathering function for each (active) module */ -static void appldata_tasklet_function(unsigned long data) +static void appldata_work_fn(void *data) { struct list_head *lh; struct appldata_ops *ops; int i; - P_DEBUG(" -= Tasklet =-\n"); + P_DEBUG(" -= Work Queue =-\n"); i = 0; spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { @@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer, : "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc"); return (int) ry; } -/********************** timer, tasklet, DIAG ***************************/ +/************************ timer, work, DIAG ****************************/ /****************************** /proc stuff **********************************/ @@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -ENODEV; } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); if (!*lenp || *ppos) { *lenp = 0; @@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); if ((buf[0] == '1') && (ops->active == 0)) { - if (!try_module_get(ops->owner)) { // protect tasklet - spin_unlock_bh(&appldata_ops_lock); + // protect work queue callback + if (!try_module_get(ops->owner)) { + spin_unlock(&appldata_ops_lock); module_put(ops->owner); return -ENODEV; } @@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } module_put(ops->owner); } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); out: *lenp = len; *ppos += len; @@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops) } memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table)); - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n", @@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops) APPLDATA_PROC_NAME_LENGTH) == 0) { P_ERROR("Name \"%s\" already registered!\n", ops->name); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } if (tmp_ops->ctl_nr == ops->ctl_nr) { P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr); kfree(ops->ctl_table); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); return -EBUSY; } } list_add(&ops->list, &appldata_ops_list); - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); ops->ctl_table[0].ctl_name = CTL_APPLDATA; ops->ctl_table[0].procname = appldata_proc_name; @@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); kfree(ops->ctl_table); ops->ctl_table = NULL; - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management **************************/ @@ -602,7 +607,7 @@ appldata_online_cpu(int cpu) init_virt_timer(&per_cpu(appldata_timer, cpu)); per_cpu(appldata_timer, cpu).function = appldata_timer_function; per_cpu(appldata_timer, cpu).data = (unsigned long) - &appldata_tasklet_struct; + &appldata_work; atomic_inc(&appldata_expire_count); spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu) del_virt_timer(&per_cpu(appldata_timer, cpu)); if (atomic_dec_and_test(&appldata_expire_count)) { atomic_set(&appldata_expire_count, num_online_cpus()); - tasklet_schedule(&appldata_tasklet_struct); + queue_work(appldata_wq, &appldata_work); } spin_lock(&appldata_timer_lock); __appldata_vtimer_setup(APPLDATA_MOD_TIMER); @@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = { /* * appldata_init() * - * init timer and tasklet, register /proc entries + * init timer, register /proc entries */ static int __init appldata_init(void) { @@ -657,6 +662,12 @@ static int __init appldata_init(void) P_DEBUG("sizeof(parameter_list) = %lu\n", sizeof(struct appldata_parameter_list)); + appldata_wq = create_singlethread_workqueue("appldata"); + if (!appldata_wq) { + P_ERROR("Could not create work queue\n"); + return -ENOMEM; + } + for_each_online_cpu(i) appldata_online_cpu(i); @@ -670,7 +681,6 @@ static int __init appldata_init(void) appldata_table[1].de->owner = THIS_MODULE; #endif - tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0); P_DEBUG("Base interface initialized.\n"); return 0; } @@ -678,7 +688,7 @@ static int __init appldata_init(void) /* * appldata_exit() * - * stop timer and tasklet, unregister /proc entries + * stop timer, unregister /proc entries */ static void __exit appldata_exit(void) { @@ -690,7 +700,7 @@ static void __exit appldata_exit(void) /* * ops list should be empty, but just in case something went wrong... */ - spin_lock_bh(&appldata_ops_lock); + spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC, @@ -700,7 +710,7 @@ static void __exit appldata_exit(void) "return code: %d\n", ops->name, rc); } } - spin_unlock_bh(&appldata_ops_lock); + spin_unlock(&appldata_ops_lock); for_each_online_cpu(i) appldata_offline_cpu(i); @@ -709,7 +719,7 @@ static void __exit appldata_exit(void) unregister_sysctl_table(appldata_sysctl_header); - tasklet_kill(&appldata_tasklet_struct); + destroy_workqueue(appldata_wq); P_DEBUG("... module unloaded!\n"); } /**************************** init / exit ******************************/ diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 462ee9a84e76..f0e2fbed3d4c 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -68,7 +68,7 @@ struct appldata_mem_data { u64 pgmajfault; /* page faults (major only) */ // <-- New in 2.6 -} appldata_mem_data; +} __attribute__((packed)) appldata_mem_data; static inline void appldata_debug_print(struct appldata_mem_data *mem_data) diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c index dd61638d3027..2a4c7432db4a 100644 --- a/arch/s390/appldata/appldata_net_sum.c +++ b/arch/s390/appldata/appldata_net_sum.c @@ -57,7 +57,7 @@ struct appldata_net_sum_data { u64 rx_dropped; /* no space in linux buffers */ u64 tx_dropped; /* no space available in linux */ u64 collisions; /* collisions while transmitting */ -} appldata_net_sum_data; +} __attribute__((packed)) appldata_net_sum_data; static inline void appldata_print_debug(struct appldata_net_sum_data *net_data) diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c index b83f07484551..e0a476bf4fd6 100644 --- a/arch/s390/appldata/appldata_os.c +++ b/arch/s390/appldata/appldata_os.c @@ -49,7 +49,7 @@ struct appldata_os_per_cpu { u32 per_cpu_softirq; /* ... spent in softirqs */ u32 per_cpu_iowait; /* ... spent while waiting for I/O */ // <-- New in 2.6 -}; +} __attribute__((packed)); struct appldata_os_data { u64 timestamp; @@ -75,7 +75,7 @@ struct appldata_os_data { /* per cpu data */ struct appldata_os_per_cpu os_cpu[0]; -}; +} __attribute__((packed)); static struct appldata_os_data *appldata_os_data; From eae936e21bd726f9d9555f2262d439fbcd61dccf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sat, 4 Jun 2005 15:43:34 -0700 Subject: [PATCH 41/42] [PATCH] serial: update NEC VR4100 series serial support - Changed the return value of unknown type to NULL. - Deleted the NULL check of dev_id in siu_interrupt(). - Deleted the NULL check of port->membase in siu_shutdown(). - Added the NULL check of port->membase to siu_startup(). - Removed early_uart_ops. Now using vr41xx_siu standerd one. - Changed KSEG1ADDR() in siu_console_setup() to ioremap(). - When uart_add_one_port() failed, changed to set NULL to port->dev. Signed-off-by: Yoichi Yuasa Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/vr41xx_siu.c | 66 +++++-------------------------------- 1 file changed, 9 insertions(+), 57 deletions(-) diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 5d2ceb623e6f..1f985327b0d4 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port) return "DSIU"; } - return "unknown"; + return NULL; } static unsigned int siu_tx_empty(struct uart_port *port) @@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs) struct uart_port *port; uint8_t iir, lsr; - if (dev_id == NULL) - return IRQ_NONE; - port = (struct uart_port *)dev_id; iir = siu_read(port, UART_IIR); @@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port) { int retval; + if (port->membase == NULL) + return -ENODEV; + siu_clear_fifo(port); (void)siu_read(port, UART_LSR); @@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port) unsigned long flags; uint8_t lcr; - if (port->membase == NULL) - return; - siu_write(port, UART_IER, 0); spin_lock_irqsave(&port->lock, flags); @@ -802,53 +799,6 @@ static int siu_init_ports(void) #ifdef CONFIG_SERIAL_VR41XX_CONSOLE -static void early_set_termios(struct uart_port *port, struct termios *new, - struct termios *old) -{ - tcflag_t c_cflag; - uint8_t lcr; - unsigned int baud, quot; - - c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } - - if (c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - if (c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - if ((c_cflag & PARODD) != PARODD) - lcr |= UART_LCR_EPAR; - if (c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); - - siu_write(port, UART_DLL, (uint8_t)quot); - siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); - - siu_write(port, UART_LCR, lcr); -} - -static struct uart_ops early_uart_ops = { - .set_termios = early_set_termios, -}; - #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) static void wait_for_xmitr(struct uart_port *port) @@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options) if (port->membase == NULL) { if (port->mapbase == 0) return -ENODEV; - port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase); + port->membase = ioremap(port->mapbase, siu_port_size(port)); } vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); @@ -949,7 +899,7 @@ static int __devinit siu_console_init(void) for (i = 0; i < num; i++) { port = &siu_uart_ports[i]; - port->ops = &early_uart_ops; + port->ops = &siu_uart_ops; } register_console(&siu_console); @@ -994,8 +944,10 @@ static int siu_probe(struct device *dev) port->dev = dev; retval = uart_add_one_port(&siu_uart_driver, port); - if (retval) + if (retval < 0) { + port->dev = NULL; break; + } } if (i == 0 && retval < 0) { From 7cef5677ef3a8084f2588ce0a129dc95d65161f6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 6 Jun 2005 08:22:29 -0700 Subject: [PATCH 42/42] Linux 2.6.12-rc6 Getting ready for the real release.. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c11a317ea910..9e005e18c71c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 12 -EXTRAVERSION =-rc5 +EXTRAVERSION =-rc6 NAME=Woozy Numbat # *DOCUMENTATION*