[ARM] 4332/2: KS8695: Serial driver
A driver for the KS8695 internal UART. Based on the 2.6.9 driver from Micrel. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
parent
c53c9cf60e
commit
2c7ee6ab7c
|
@ -359,6 +359,23 @@ config SERIAL_ATMEL_TTYAT
|
|||
|
||||
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
|
||||
|
||||
config SERIAL_KS8695
|
||||
bool "Micrel KS8695 (Centaur) serial port support"
|
||||
depends on ARCH_KS8695
|
||||
select SERIAL_CORE
|
||||
help
|
||||
This selects the Micrel Centaur KS8695 UART. Say Y here.
|
||||
|
||||
config SERIAL_KS8695_CONSOLE
|
||||
bool "Support for console on KS8695 (Centaur) serial port"
|
||||
depends on SERIAL_KS8695=y
|
||||
select SERIAL_CORE_CONSOLE
|
||||
help
|
||||
Say Y here if you wish to use a KS8695 (Centaur) UART as the
|
||||
system console (the system console is the device which
|
||||
receives all kernel messages and warnings and which allows
|
||||
logins in single user mode).
|
||||
|
||||
config SERIAL_CLPS711X
|
||||
tristate "CLPS711X serial port support"
|
||||
depends on ARM && ARCH_CLPS711X
|
||||
|
|
|
@ -61,3 +61,4 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
|
|||
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
|
||||
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
||||
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
||||
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
||||
|
|
657
drivers/serial/serial_ks8695.c
Normal file
657
drivers/serial/serial_ks8695.c
Normal file
|
@ -0,0 +1,657 @@
|
|||
/*
|
||||
* drivers/serial/serial_ks8695.c
|
||||
*
|
||||
* Driver for KS8695 serial ports
|
||||
*
|
||||
* Based on drivers/serial/serial_amba.c, by Kam Lee.
|
||||
*
|
||||
* Copyright 2002-2005 Micrel Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/sysrq.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/regs-uart.h>
|
||||
#include <asm/arch/regs-irq.h>
|
||||
|
||||
#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
||||
#define SUPPORT_SYSRQ
|
||||
#endif
|
||||
|
||||
#include <linux/serial_core.h>
|
||||
|
||||
|
||||
#define SERIAL_KS8695_MAJOR 204
|
||||
#define SERIAL_KS8695_MINOR 16
|
||||
#define SERIAL_KS8695_DEVNAME "ttyAM"
|
||||
|
||||
#define SERIAL_KS8695_NR 1
|
||||
|
||||
/*
|
||||
* Access macros for the KS8695 UART
|
||||
*/
|
||||
#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
|
||||
#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
|
||||
#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
|
||||
#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
|
||||
#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
|
||||
#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
|
||||
#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
|
||||
#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
|
||||
#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
|
||||
#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
|
||||
#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
|
||||
#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
|
||||
|
||||
#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
|
||||
|
||||
#define UART_DUMMY_LSR_RX 0x100
|
||||
#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
|
||||
|
||||
#define tx_enabled(port) ((port)->unused[0])
|
||||
#define rx_enabled(port) ((port)->unused[1])
|
||||
|
||||
|
||||
#ifdef SUPPORT_SYSRQ
|
||||
static struct console ks8695_console;
|
||||
#endif
|
||||
|
||||
static void ks8695uart_stop_tx(struct uart_port *port)
|
||||
{
|
||||
if (tx_enabled(port)) {
|
||||
disable_irq(KS8695_IRQ_UART_TX);
|
||||
tx_enabled(port) = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void ks8695uart_start_tx(struct uart_port *port)
|
||||
{
|
||||
if (!tx_enabled(port)) {
|
||||
enable_irq(KS8695_IRQ_UART_TX);
|
||||
tx_enabled(port) = 1;
|
||||
}
|
||||
}
|
||||
|
||||
static void ks8695uart_stop_rx(struct uart_port *port)
|
||||
{
|
||||
if (rx_enabled(port)) {
|
||||
disable_irq(KS8695_IRQ_UART_RX);
|
||||
rx_enabled(port) = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void ks8695uart_enable_ms(struct uart_port *port)
|
||||
{
|
||||
enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
|
||||
}
|
||||
|
||||
static void ks8695uart_disable_ms(struct uart_port *port)
|
||||
{
|
||||
disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
|
||||
}
|
||||
|
||||
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
|
||||
{
|
||||
struct uart_port *port = dev_id;
|
||||
struct tty_struct *tty = port->info->tty;
|
||||
unsigned int status, ch, lsr, flg, max_count = 256;
|
||||
|
||||
status = UART_GET_LSR(port); /* clears pending LSR interrupts */
|
||||
while ((status & URLS_URDR) && max_count--) {
|
||||
ch = UART_GET_CHAR(port);
|
||||
flg = TTY_NORMAL;
|
||||
|
||||
port->icount.rx++;
|
||||
|
||||
/*
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
|
||||
if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
|
||||
if (lsr & URLS_URBI) {
|
||||
lsr &= ~(URLS_URFE | URLS_URPE);
|
||||
port->icount.brk++;
|
||||
if (uart_handle_break(port))
|
||||
goto ignore_char;
|
||||
}
|
||||
if (lsr & URLS_URPE)
|
||||
port->icount.parity++;
|
||||
if (lsr & URLS_URFE)
|
||||
port->icount.frame++;
|
||||
if (lsr & URLS_URROE)
|
||||
port->icount.overrun++;
|
||||
|
||||
lsr &= port->read_status_mask;
|
||||
|
||||
if (lsr & URLS_URBI)
|
||||
flg = TTY_BREAK;
|
||||
else if (lsr & URLS_URPE)
|
||||
flg = TTY_PARITY;
|
||||
else if (lsr & URLS_URFE)
|
||||
flg = TTY_FRAME;
|
||||
}
|
||||
|
||||
if (uart_handle_sysrq_char(port, ch))
|
||||
goto ignore_char;
|
||||
|
||||
uart_insert_char(port, lsr, URLS_URROE, ch, flg);
|
||||
|
||||
ignore_char:
|
||||
status = UART_GET_LSR(port);
|
||||
}
|
||||
tty_flip_buffer_push(tty);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
||||
static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
|
||||
{
|
||||
struct uart_port *port = dev_id;
|
||||
struct circ_buf *xmit = &port->info->xmit;
|
||||
unsigned int count;
|
||||
|
||||
if (port->x_char) {
|
||||
KS8695_CLR_TX_INT();
|
||||
UART_PUT_CHAR(port, port->x_char);
|
||||
port->icount.tx++;
|
||||
port->x_char = 0;
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
|
||||
ks8695uart_stop_tx(port);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
count = 16; /* fifo size */
|
||||
while (!uart_circ_empty(xmit) && (count-- > 0)) {
|
||||
KS8695_CLR_TX_INT();
|
||||
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
|
||||
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
port->icount.tx++;
|
||||
}
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(port);
|
||||
|
||||
if (uart_circ_empty(xmit))
|
||||
ks8695uart_stop_tx(port);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
|
||||
{
|
||||
struct uart_port *port = dev_id;
|
||||
unsigned int status;
|
||||
|
||||
/*
|
||||
* clear modem interrupt by reading MSR
|
||||
*/
|
||||
status = UART_GET_MSR(port);
|
||||
|
||||
if (status & URMS_URDDCD)
|
||||
uart_handle_dcd_change(port, status & URMS_URDDCD);
|
||||
|
||||
if (status & URMS_URDDST)
|
||||
port->icount.dsr++;
|
||||
|
||||
if (status & URMS_URDCTS)
|
||||
uart_handle_cts_change(port, status & URMS_URDCTS);
|
||||
|
||||
if (status & URMS_URTERI)
|
||||
port->icount.rng++;
|
||||
|
||||
wake_up_interruptible(&port->info->delta_msr_wait);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static unsigned int ks8695uart_tx_empty(struct uart_port *port)
|
||||
{
|
||||
return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
|
||||
}
|
||||
|
||||
static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
unsigned int result = 0;
|
||||
unsigned int status;
|
||||
|
||||
status = UART_GET_MSR(port);
|
||||
if (status & URMS_URDCD)
|
||||
result |= TIOCM_CAR;
|
||||
if (status & URMS_URDSR)
|
||||
result |= TIOCM_DSR;
|
||||
if (status & URMS_URCTS)
|
||||
result |= TIOCM_CTS;
|
||||
if (status & URMS_URRI)
|
||||
result |= TIOCM_RI;
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
|
||||
{
|
||||
unsigned int mcr;
|
||||
|
||||
mcr = UART_GET_MCR(port);
|
||||
if (mctrl & TIOCM_RTS)
|
||||
mcr |= URMC_URRTS;
|
||||
else
|
||||
mcr &= ~URMC_URRTS;
|
||||
|
||||
if (mctrl & TIOCM_DTR)
|
||||
mcr |= URMC_URDTR;
|
||||
else
|
||||
mcr &= ~URMC_URDTR;
|
||||
|
||||
UART_PUT_MCR(port, mcr);
|
||||
}
|
||||
|
||||
static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
unsigned int lcr;
|
||||
|
||||
lcr = UART_GET_LCR(port);
|
||||
|
||||
if (break_state == -1)
|
||||
lcr |= URLC_URSBC;
|
||||
else
|
||||
lcr &= ~URLC_URSBC;
|
||||
|
||||
UART_PUT_LCR(port, lcr);
|
||||
}
|
||||
|
||||
static int ks8695uart_startup(struct uart_port *port)
|
||||
{
|
||||
int retval;
|
||||
|
||||
set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
|
||||
tx_enabled(port) = 0;
|
||||
rx_enabled(port) = 1;
|
||||
|
||||
/*
|
||||
* Allocate the IRQ
|
||||
*/
|
||||
retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
|
||||
if (retval)
|
||||
goto err_tx;
|
||||
|
||||
retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
|
||||
if (retval)
|
||||
goto err_rx;
|
||||
|
||||
retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
|
||||
if (retval)
|
||||
return err_ls;
|
||||
|
||||
retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
|
||||
if (retval)
|
||||
return err_ms;
|
||||
|
||||
return 0;
|
||||
|
||||
err_ms:
|
||||
free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
|
||||
err_ls:
|
||||
free_irq(KS8695_IRQ_UART_RX, port);
|
||||
err_rx:
|
||||
free_irq(KS8695_IRQ_UART_TX, port);
|
||||
err_tx:
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void ks8695uart_shutdown(struct uart_port *port)
|
||||
{
|
||||
/*
|
||||
* Free the interrupt
|
||||
*/
|
||||
free_irq(KS8695_IRQ_UART_RX, port);
|
||||
free_irq(KS8695_IRQ_UART_TX, port);
|
||||
free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
|
||||
free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
|
||||
|
||||
/* disable break condition and fifos */
|
||||
UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
|
||||
UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
|
||||
}
|
||||
|
||||
static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
|
||||
{
|
||||
unsigned int lcr, fcr = 0;
|
||||
unsigned long flags;
|
||||
unsigned int baud, quot;
|
||||
|
||||
/*
|
||||
* Ask the core to calculate the divisor for us.
|
||||
*/
|
||||
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
case CS5:
|
||||
lcr = URCL_5;
|
||||
break;
|
||||
case CS6:
|
||||
lcr = URCL_6;
|
||||
break;
|
||||
case CS7:
|
||||
lcr = URCL_7;
|
||||
break;
|
||||
default:
|
||||
lcr = URCL_8;
|
||||
break;
|
||||
}
|
||||
|
||||
/* stop bits */
|
||||
if (termios->c_cflag & CSTOPB)
|
||||
lcr |= URLC_URSB;
|
||||
|
||||
/* parity */
|
||||
if (termios->c_cflag & PARENB) {
|
||||
if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
|
||||
if (termios->c_cflag & PARODD)
|
||||
lcr |= URPE_MARK;
|
||||
else
|
||||
lcr |= URPE_SPACE;
|
||||
}
|
||||
else if (termios->c_cflag & PARODD)
|
||||
lcr |= URPE_ODD;
|
||||
else
|
||||
lcr |= URPE_EVEN;
|
||||
}
|
||||
|
||||
if (port->fifosize > 1)
|
||||
fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
/*
|
||||
* Update the per-port timeout.
|
||||
*/
|
||||
uart_update_timeout(port, termios->c_cflag, baud);
|
||||
|
||||
port->read_status_mask = URLS_URROE;
|
||||
if (termios->c_iflag & INPCK)
|
||||
port->read_status_mask |= (URLS_URFE | URLS_URPE);
|
||||
if (termios->c_iflag & (BRKINT | PARMRK))
|
||||
port->read_status_mask |= URLS_URBI;
|
||||
|
||||
/*
|
||||
* Characters to ignore
|
||||
*/
|
||||
port->ignore_status_mask = 0;
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
|
||||
if (termios->c_iflag & IGNBRK) {
|
||||
port->ignore_status_mask |= URLS_URBI;
|
||||
/*
|
||||
* If we're ignoring parity and break indicators,
|
||||
* ignore overruns too (for real raw support).
|
||||
*/
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
port->ignore_status_mask |= URLS_URROE;
|
||||
}
|
||||
|
||||
/*
|
||||
* Ignore all characters if CREAD is not set.
|
||||
*/
|
||||
if ((termios->c_cflag & CREAD) == 0)
|
||||
port->ignore_status_mask |= UART_DUMMY_LSR_RX;
|
||||
|
||||
/* first, disable everything */
|
||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
||||
ks8695uart_enable_ms(port);
|
||||
else
|
||||
ks8695uart_disable_ms(port);
|
||||
|
||||
/* Set baud rate */
|
||||
UART_PUT_BRDR(port, quot);
|
||||
|
||||
UART_PUT_LCR(port, lcr);
|
||||
UART_PUT_FCR(port, fcr);
|
||||
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
}
|
||||
|
||||
static const char *ks8695uart_type(struct uart_port *port)
|
||||
{
|
||||
return port->type == PORT_KS8695 ? "KS8695" : NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
* Release the memory region(s) being used by 'port'
|
||||
*/
|
||||
static void ks8695uart_release_port(struct uart_port *port)
|
||||
{
|
||||
release_mem_region(port->mapbase, UART_PORT_SIZE);
|
||||
}
|
||||
|
||||
/*
|
||||
* Request the memory region(s) being used by 'port'
|
||||
*/
|
||||
static int ks8695uart_request_port(struct uart_port *port)
|
||||
{
|
||||
return request_mem_region(port->mapbase, UART_PORT_SIZE,
|
||||
"serial_ks8695") != NULL ? 0 : -EBUSY;
|
||||
}
|
||||
|
||||
/*
|
||||
* Configure/autoconfigure the port.
|
||||
*/
|
||||
static void ks8695uart_config_port(struct uart_port *port, int flags)
|
||||
{
|
||||
if (flags & UART_CONFIG_TYPE) {
|
||||
port->type = PORT_KS8695;
|
||||
ks8695uart_request_port(port);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* verify the new serial_struct (for TIOCSSERIAL).
|
||||
*/
|
||||
static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
|
||||
ret = -EINVAL;
|
||||
if (ser->irq != port->irq)
|
||||
ret = -EINVAL;
|
||||
if (ser->baud_base < 9600)
|
||||
ret = -EINVAL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct uart_ops ks8695uart_pops = {
|
||||
.tx_empty = ks8695uart_tx_empty,
|
||||
.set_mctrl = ks8695uart_set_mctrl,
|
||||
.get_mctrl = ks8695uart_get_mctrl,
|
||||
.stop_tx = ks8695uart_stop_tx,
|
||||
.start_tx = ks8695uart_start_tx,
|
||||
.stop_rx = ks8695uart_stop_rx,
|
||||
.enable_ms = ks8695uart_enable_ms,
|
||||
.break_ctl = ks8695uart_break_ctl,
|
||||
.startup = ks8695uart_startup,
|
||||
.shutdown = ks8695uart_shutdown,
|
||||
.set_termios = ks8695uart_set_termios,
|
||||
.type = ks8695uart_type,
|
||||
.release_port = ks8695uart_release_port,
|
||||
.request_port = ks8695uart_request_port,
|
||||
.config_port = ks8695uart_config_port,
|
||||
.verify_port = ks8695uart_verify_port,
|
||||
};
|
||||
|
||||
static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
|
||||
{
|
||||
.membase = (void *) KS8695_UART_VA,
|
||||
.mapbase = KS8695_UART_VA,
|
||||
.iotype = SERIAL_IO_MEM,
|
||||
.irq = KS8695_IRQ_UART_TX,
|
||||
.uartclk = CLOCK_TICK_RATE * 16,
|
||||
.fifosize = 16,
|
||||
.ops = &ks8695uart_pops,
|
||||
.flags = ASYNC_BOOT_AUTOCONF,
|
||||
.line = 0,
|
||||
}
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SERIAL_KS8695_CONSOLE
|
||||
static void ks8695_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
while (!(UART_GET_LSR(port) & URLS_URTHRE))
|
||||
barrier();
|
||||
|
||||
UART_PUT_CHAR(port, ch);
|
||||
}
|
||||
|
||||
static void ks8695_console_write(struct console *co, const char *s, u_int count)
|
||||
{
|
||||
struct uart_port *port = ks8695uart_ports + co->index;
|
||||
|
||||
uart_console_write(port, s, count, ks8695_console_putchar);
|
||||
}
|
||||
|
||||
static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
|
||||
{
|
||||
unsigned int lcr;
|
||||
|
||||
lcr = UART_GET_LCR(port);
|
||||
|
||||
switch (lcr & URLC_PARITY) {
|
||||
case URPE_ODD:
|
||||
*parity = 'o';
|
||||
break;
|
||||
case URPE_EVEN:
|
||||
*parity = 'e';
|
||||
break;
|
||||
default:
|
||||
*parity = 'n';
|
||||
}
|
||||
|
||||
switch (lcr & URLC_URCL) {
|
||||
case URCL_5:
|
||||
*bits = 5;
|
||||
break;
|
||||
case URCL_6:
|
||||
*bits = 6;
|
||||
break;
|
||||
case URCL_7:
|
||||
*bits = 7;
|
||||
break;
|
||||
default:
|
||||
*bits = 8;
|
||||
}
|
||||
|
||||
*baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
|
||||
*baud /= 16;
|
||||
*baud &= 0xFFFFFFF0;
|
||||
}
|
||||
|
||||
static int __init ks8695_console_setup(struct console *co, char *options)
|
||||
{
|
||||
struct uart_port *port;
|
||||
int baud = 115200;
|
||||
int bits = 8;
|
||||
int parity = 'n';
|
||||
int flow = 'n';
|
||||
|
||||
/*
|
||||
* Check whether an invalid uart number has been specified, and
|
||||
* if so, search for the first available port that does have
|
||||
* console support.
|
||||
*/
|
||||
port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
|
||||
|
||||
if (options)
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
else
|
||||
ks8695_console_get_options(port, &baud, &parity, &bits);
|
||||
|
||||
return uart_set_options(port, co, baud, parity, bits, flow);
|
||||
}
|
||||
|
||||
extern struct uart_driver ks8695_reg;
|
||||
|
||||
static struct console ks8695_console = {
|
||||
.name = SERIAL_KS8695_DEVNAME,
|
||||
.write = ks8695_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = ks8695_console_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
.data = &ks8695_reg,
|
||||
};
|
||||
|
||||
static int __init ks8695_console_init(void)
|
||||
{
|
||||
register_console(&ks8695_console);
|
||||
return 0;
|
||||
}
|
||||
|
||||
console_initcall(ks8695_console_init);
|
||||
|
||||
#define KS8695_CONSOLE &ks8695_console
|
||||
#else
|
||||
#define KS8695_CONSOLE NULL
|
||||
#endif
|
||||
|
||||
static struct uart_driver ks8695_reg = {
|
||||
.owner = THIS_MODULE,
|
||||
.driver_name = "serial_ks8695",
|
||||
.dev_name = SERIAL_KS8695_DEVNAME,
|
||||
.major = SERIAL_KS8695_MAJOR,
|
||||
.minor = SERIAL_KS8695_MINOR,
|
||||
.nr = SERIAL_KS8695_NR,
|
||||
.cons = KS8695_CONSOLE,
|
||||
};
|
||||
|
||||
static int __init ks8695uart_init(void)
|
||||
{
|
||||
int i, ret;
|
||||
|
||||
printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
|
||||
|
||||
ret = uart_register_driver(&ks8695_reg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < SERIAL_KS8695_NR; i++)
|
||||
uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit ks8695uart_exit(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < SERIAL_KS8695_NR; i++)
|
||||
uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
|
||||
uart_unregister_driver(&ks8695_reg);
|
||||
}
|
||||
|
||||
module_init(ks8695uart_init);
|
||||
module_exit(ks8695uart_exit);
|
||||
|
||||
MODULE_DESCRIPTION("KS8695 serial port driver");
|
||||
MODULE_AUTHOR("Micrel Inc.");
|
||||
MODULE_LICENSE("GPL");
|
|
@ -139,6 +139,10 @@
|
|||
/* Blackfin bf5xx */
|
||||
#define PORT_BFIN 75
|
||||
|
||||
/* Micrel KS8695 */
|
||||
#define PORT_KS8695 76
|
||||
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#include <linux/compiler.h>
|
||||
|
|
Loading…
Reference in a new issue