diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 154aced0b91b..65cc0ac9b82d 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -170,7 +170,7 @@ static int mmc_ios_show(struct seq_file *s, void *data) str = "invalid"; break; } - seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str); + seq_printf(s, "signal voltage:\t%u (%s)\n", ios->signal_voltage, str); switch (ios->drv_type) { case MMC_SET_DRIVER_TYPE_A: diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 2b16263458af..aba786daebca 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -29,15 +29,18 @@ struct mmc_pwrseq_simple { static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { - int i; struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - int values[reset_gpios->ndescs]; - for (i = 0; i < reset_gpios->ndescs; i++) - values[i] = value; + if (!IS_ERR(reset_gpios)) { + int i; + int values[reset_gpios->ndescs]; - gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, - values); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep( + reset_gpios->ndescs, reset_gpios->desc, values); + } } static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) @@ -79,7 +82,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - gpiod_put_array(pwrseq->reset_gpios); + if (!IS_ERR(pwrseq->reset_gpios)) + gpiod_put_array(pwrseq->reset_gpios); if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk); @@ -112,7 +116,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, } pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios)) { + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { ret = PTR_ERR(pwrseq->reset_gpios); goto clk_put; } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index f2b164b214ae..bb39a29b2db6 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -329,6 +329,7 @@ static int mmc_read_switch(struct mmc_card *card) card->sw_caps.sd3_bus_mode = status[13]; /* Driver Strengths supported by the card */ card->sw_caps.sd3_drv_type = status[9]; + card->sw_caps.sd3_curr_limit = status[7] | status[6] << 8; } out: @@ -545,14 +546,25 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status) * when we set current limit to 200ma, the card will draw 200ma, and * when we set current limit to 400/600/800ma, the card will draw its * maximum 300ma from the host. + * + * The above is incorrect: if we try to set a current limit that is + * not supported by the card, the card can rightfully error out the + * attempt, and remain at the default current limit. This results + * in a 300mA card being limited to 200mA even though the host + * supports 800mA. Failures seen with SanDisk 8GB UHS cards with + * an iMX6 host. --rmk */ - if (max_current >= 800) + if (max_current >= 800 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800) current_limit = SD_SET_CURRENT_LIMIT_800; - else if (max_current >= 600) + else if (max_current >= 600 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600) current_limit = SD_SET_CURRENT_LIMIT_600; - else if (max_current >= 400) + else if (max_current >= 400 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400) current_limit = SD_SET_CURRENT_LIMIT_400; - else if (max_current >= 200) + else if (max_current >= 200 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200) current_limit = SD_SET_CURRENT_LIMIT_200; if (current_limit != SD_SET_CURRENT_NO_CHANGE) { @@ -626,9 +638,9 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. */ if (!mmc_host_is_spi(card->host) && - (card->sd_bus_speed == UHS_SDR50_BUS_SPEED || - card->sd_bus_speed == UHS_DDR50_BUS_SPEED || - card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) { + (card->host->ios.timing == MMC_TIMING_UHS_SDR50 || + card->host->ios.timing == MMC_TIMING_UHS_DDR50 || + card->host->ios.timing == MMC_TIMING_UHS_SDR104)) { err = mmc_execute_tuning(card); /* @@ -638,7 +650,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) * difference between v3.00 and 3.01 spec means that CMD19 * tuning is also available for DDR50 mode. */ - if (err && card->sd_bus_speed == UHS_DDR50_BUS_SPEED) { + if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) { pr_warn("%s: ddr50 tuning failed\n", mmc_hostname(card->host)); err = 0; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index d61ba1a0495e..467b3cf80c44 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -535,8 +535,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card) * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. */ if (!mmc_host_is_spi(card->host) && - ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) || - (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) + ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) || + (card->host->ios.timing == MMC_TIMING_UHS_SDR104))) err = mmc_execute_tuning(card); out: return err; diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index 8e94e555b788..6f6fc527a263 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -223,6 +223,7 @@ static const struct cis_tpl cis_tpl_list[] = { { 0x20, 4, cistpl_manfid }, { 0x21, 2, /* cistpl_funcid */ }, { 0x22, 0, cistpl_funce }, + { 0x91, 2, /* cistpl_sdio_std */ }, }; static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index fb266745f824..0d6ca4116f3d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -151,6 +151,7 @@ static struct variant_data variant_nomadik = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, .datalength_bits = 24, .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, .st_sdio = true, @@ -1886,7 +1887,7 @@ static struct amba_id mmci_ids[] = { { .id = 0x00280180, .mask = 0x00ffffff, - .data = &variant_u300, + .data = &variant_nomadik, }, { .id = 0x00480180, diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index e4b05dbb9ca8..4a0d6b80eaa3 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -94,9 +94,9 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) desc = NULL; ret = cookie; } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); pio: if (!desc) { @@ -116,8 +116,8 @@ pio: "DMA failed: %d, falling back to PIO\n", ret); } - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, - desc, cookie, host->sg_len); + dev_dbg(&host->pdev->dev, "%s(): desc %p, sg[%d]\n", __func__, + desc, host->sg_len); } static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) @@ -174,9 +174,9 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) desc = NULL; ret = cookie; } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); } - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); pio: if (!desc) { @@ -196,8 +196,7 @@ pio: "DMA failed: %d, falling back to PIO\n", ret); } - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, - desc, cookie); + dev_dbg(&host->pdev->dev, "%s(): desc %p\n", __func__, desc); } void tmio_mmc_start_dma(struct tmio_mmc_host *host,