[PATCH] dvb: Updated documentation for FusionHDTV Lite cards

- Updated documentation for FusionHDTV Lite cards. We must differentiate
  the bt8xx based "Lite" cards from the cx2388x based "Gold" cards.

- Provide location of CARDLIST.bttv Documentation, rather than
  instructing users to look at bttv.h

- Include card decimal id numbers. These are valid for module arguments,
  and might be easier for some people to remember, rather than hex.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Michael Krufky 2005-11-08 21:35:35 -08:00 committed by Linus Torvalds
parent 28fdd7599c
commit 2cbeddc976

View file

@ -1,5 +1,5 @@
How to get the Nebula, PCTV and Twinhan DST cards working
=========================================================
How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
==========================================================================
This class of cards has a bt878a as the PCI interface, and
require the bttv driver.
@ -26,11 +26,12 @@ Furthermore you need to enable
In general you need to load the bttv driver, which will handle the gpio and
i2c communication for us, plus the common dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
automatically by the dvb-bt8xx device driver.
3a) Nebula / Pinnacle PCTV
--------------------------
3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
---------------------------------------------
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
$ modprobe dvb-bt8xx
@ -67,8 +68,8 @@ verbose=0 means complete disabling of messages
dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
0x20 means it has a Conditional Access slot.
The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
The autodetected values are determined by the cards 'response string'
which you can see in your logs e.g.
dst_get_device_id: Recognise [DSTMCI]
@ -84,25 +85,29 @@ If you happen to be running multiple cards, it would be advisable to load
the bttv module with the card id. This would help to solve any module loading
problems that you might face.
for example, if you happen to have a Twinhan and clones alongwith a FusionHDTV5
card
For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
$ modprobe bttv card=0x71 card=0x87
Here the order of the card id is important and should be the same as that of the
physical order of the cards. Here card=0x71 represents the Twinhan and clones
and card=0x87 represents Fusion HDTV5.
and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
specified in decimal, rather than hex:
$ modprobe bttv card=113 card=135
Some examples of card-id's
Pinnacle Sat 0x5e
Nebula Digi TV 0x68
PC HDTV 0x70
Twinhan 0x71
Fusion HDTV5 0x87
Pinnacle Sat 0x5e (94)
Nebula Digi TV 0x68 (104)
PC HDTV 0x70 (112)
Twinhan 0x71 (113)
FusionHDTV DVB-T Lite 0x80 (128)
FusionHDTV5 Lite 0x87 (135)
For a full list of card-id's, see the V4L Documentation within the kernel
source: linux/Documentation/video4linux/CARDLIST.bttv
For a full list of card-id's, you can see the exported card-id's from
bttv-cards.c in linux-2.6.x/drivers/media/video/bttv.h
If you have problems with this please do ask on the mailing list.
--