e100/e1000*/igb*/ixgb*: Add missing read memory barrier
Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> CC: stable <stable@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
4bc091d85f
commit
2d0bb1c1f4
|
@ -1779,6 +1779,7 @@ static int e100_tx_clean(struct nic *nic)
|
|||
for (cb = nic->cb_to_clean;
|
||||
cb->status & cpu_to_le16(cb_complete);
|
||||
cb = nic->cb_to_clean = cb->next) {
|
||||
rmb(); /* read skb after status */
|
||||
netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
|
||||
"cb[%d]->status = 0x%04X\n",
|
||||
(int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
|
||||
|
@ -1927,6 +1928,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
|
|||
|
||||
netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
|
||||
"status=0x%04X\n", rfd_status);
|
||||
rmb(); /* read size after status bit */
|
||||
|
||||
/* If data isn't ready, nothing to indicate */
|
||||
if (unlikely(!(rfd_status & cb_complete))) {
|
||||
|
|
|
@ -3454,6 +3454,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
|
|||
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->count)) {
|
||||
bool cleaned = false;
|
||||
rmb(); /* read buffer_info after eop_desc */
|
||||
for ( ; !cleaned; count++) {
|
||||
tx_desc = E1000_TX_DESC(*tx_ring, i);
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
@ -3643,6 +3644,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
|
|||
if (*work_done >= work_to_do)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
status = rx_desc->status;
|
||||
skb = buffer_info->skb;
|
||||
|
@ -3849,6 +3851,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
|
|||
if (*work_done >= work_to_do)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
status = rx_desc->status;
|
||||
skb = buffer_info->skb;
|
||||
|
|
|
@ -781,6 +781,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
|
|||
if (*work_done >= work_to_do)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
status = rx_desc->status;
|
||||
skb = buffer_info->skb;
|
||||
|
@ -991,6 +992,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
|
|||
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->count)) {
|
||||
bool cleaned = false;
|
||||
rmb(); /* read buffer_info after eop_desc */
|
||||
for (; !cleaned; count++) {
|
||||
tx_desc = E1000_TX_DESC(*tx_ring, i);
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
@ -1087,6 +1089,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
|
|||
break;
|
||||
(*work_done)++;
|
||||
skb = buffer_info->skb;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
/* in the packet split case this is header only */
|
||||
prefetch(skb->data - NET_IP_ALIGN);
|
||||
|
@ -1286,6 +1289,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
|
|||
if (*work_done >= work_to_do)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
status = rx_desc->status;
|
||||
skb = buffer_info->skb;
|
||||
|
|
|
@ -5353,6 +5353,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
|
|||
|
||||
while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->count)) {
|
||||
rmb(); /* read buffer_info after eop_desc status */
|
||||
for (cleaned = false; !cleaned; count++) {
|
||||
tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
@ -5558,6 +5559,7 @@ static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
|
|||
if (*work_done >= budget)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
skb = buffer_info->skb;
|
||||
prefetch(skb->data - NET_IP_ALIGN);
|
||||
|
|
|
@ -248,6 +248,7 @@ static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
|
|||
if (*work_done >= work_to_do)
|
||||
break;
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
|
||||
buffer_info = &rx_ring->buffer_info[i];
|
||||
|
||||
|
@ -780,6 +781,7 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
|
|||
|
||||
while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->count)) {
|
||||
rmb(); /* read buffer_info after eop_desc status */
|
||||
for (cleaned = false; !cleaned; count++) {
|
||||
tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
|
|
@ -1816,6 +1816,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
|
|||
|
||||
while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
|
||||
|
||||
rmb(); /* read buffer_info after eop_desc */
|
||||
for (cleaned = false; !cleaned; ) {
|
||||
tx_desc = IXGB_TX_DESC(*tx_ring, i);
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
@ -1976,6 +1977,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
|
|||
break;
|
||||
|
||||
(*work_done)++;
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
status = rx_desc->status;
|
||||
skb = buffer_info->skb;
|
||||
buffer_info->skb = NULL;
|
||||
|
|
|
@ -748,6 +748,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
|
|||
while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->work_limit)) {
|
||||
bool cleaned = false;
|
||||
rmb(); /* read buffer_info after eop_desc */
|
||||
for ( ; !cleaned; count++) {
|
||||
struct sk_buff *skb;
|
||||
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
|
||||
|
|
|
@ -231,6 +231,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
|
|||
while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
|
||||
(count < tx_ring->work_limit)) {
|
||||
bool cleaned = false;
|
||||
rmb(); /* read buffer_info after eop_desc */
|
||||
for ( ; !cleaned; count++) {
|
||||
struct sk_buff *skb;
|
||||
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
|
||||
|
@ -518,6 +519,7 @@ static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
|
|||
break;
|
||||
(*work_done)++;
|
||||
|
||||
rmb(); /* read descriptor and rx_buffer_info after status DD */
|
||||
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
|
||||
hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
|
||||
len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
|
||||
|
|
Loading…
Reference in a new issue