can: tscan1: add driver for TS-CAN1 boards
Add driver for Technologic Systems TS-CAN1 PC104 peripheral boards. Signed-off-by: Andre B. Oliveira <anbadeol@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
7e223de84b
commit
2d3359f8b9
|
@ -58,4 +58,16 @@ config CAN_PLX_PCI
|
||||||
- esd CAN-PCIe/2000
|
- esd CAN-PCIe/2000
|
||||||
- Marathon CAN-bus-PCI card (http://www.marathon.ru/)
|
- Marathon CAN-bus-PCI card (http://www.marathon.ru/)
|
||||||
- TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
|
- TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
|
||||||
|
|
||||||
|
config CAN_TSCAN1
|
||||||
|
tristate "TS-CAN1 PC104 boards"
|
||||||
|
depends on ISA
|
||||||
|
help
|
||||||
|
This driver is for Technologic Systems' TSCAN-1 PC104 boards.
|
||||||
|
http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
|
||||||
|
The driver supports multiple boards and automatically configures them:
|
||||||
|
PLD IO base addresses are read from jumpers JP1 and JP2,
|
||||||
|
IRQ numbers are read from jumpers JP4 and JP5,
|
||||||
|
SJA1000 IO base addresses are chosen heuristically (first that works).
|
||||||
|
|
||||||
endif
|
endif
|
||||||
|
|
|
@ -9,5 +9,6 @@ obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
|
||||||
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
|
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
|
||||||
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
|
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
|
||||||
obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
|
obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
|
||||||
|
obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
|
||||||
|
|
||||||
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
|
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
|
||||||
|
|
216
drivers/net/can/sja1000/tscan1.c
Normal file
216
drivers/net/can/sja1000/tscan1.c
Normal file
|
@ -0,0 +1,216 @@
|
||||||
|
/*
|
||||||
|
* tscan1.c: driver for Technologic Systems TS-CAN1 PC104 boards
|
||||||
|
*
|
||||||
|
* Copyright 2010 Andre B. Oliveira
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* as published by the Free Software Foundation; either version 2
|
||||||
|
* of the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* References:
|
||||||
|
* - Getting started with TS-CAN1, Technologic Systems, Jun 2009
|
||||||
|
* http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/ioport.h>
|
||||||
|
#include <linux/isa.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/netdevice.h>
|
||||||
|
#include "sja1000.h"
|
||||||
|
|
||||||
|
MODULE_DESCRIPTION("Driver for Technologic Systems TS-CAN1 PC104 boards");
|
||||||
|
MODULE_AUTHOR("Andre B. Oliveira <anbadeol@gmail.com>");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
|
|
||||||
|
/* Maximum number of boards (one in each JP1:JP2 setting of IO address) */
|
||||||
|
#define TSCAN1_MAXDEV 4
|
||||||
|
|
||||||
|
/* PLD registers address offsets */
|
||||||
|
#define TSCAN1_ID1 0
|
||||||
|
#define TSCAN1_ID2 1
|
||||||
|
#define TSCAN1_VERSION 2
|
||||||
|
#define TSCAN1_LED 3
|
||||||
|
#define TSCAN1_PAGE 4
|
||||||
|
#define TSCAN1_MODE 5
|
||||||
|
#define TSCAN1_JUMPERS 6
|
||||||
|
|
||||||
|
/* PLD board identifier registers magic values */
|
||||||
|
#define TSCAN1_ID1_VALUE 0xf6
|
||||||
|
#define TSCAN1_ID2_VALUE 0xb9
|
||||||
|
|
||||||
|
/* PLD mode register SJA1000 IO enable bit */
|
||||||
|
#define TSCAN1_MODE_ENABLE 0x40
|
||||||
|
|
||||||
|
/* PLD jumpers register bits */
|
||||||
|
#define TSCAN1_JP4 0x10
|
||||||
|
#define TSCAN1_JP5 0x20
|
||||||
|
|
||||||
|
/* PLD IO base addresses start */
|
||||||
|
#define TSCAN1_PLD_ADDRESS 0x150
|
||||||
|
|
||||||
|
/* PLD register space size */
|
||||||
|
#define TSCAN1_PLD_SIZE 8
|
||||||
|
|
||||||
|
/* SJA1000 register space size */
|
||||||
|
#define TSCAN1_SJA1000_SIZE 32
|
||||||
|
|
||||||
|
/* SJA1000 crystal frequency (16MHz) */
|
||||||
|
#define TSCAN1_SJA1000_XTAL 16000000
|
||||||
|
|
||||||
|
/* SJA1000 IO base addresses */
|
||||||
|
static const unsigned short tscan1_sja1000_addresses[] __devinitconst = {
|
||||||
|
0x100, 0x120, 0x180, 0x1a0, 0x200, 0x240, 0x280, 0x320
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Read SJA1000 register */
|
||||||
|
static u8 tscan1_read(const struct sja1000_priv *priv, int reg)
|
||||||
|
{
|
||||||
|
return inb((unsigned long)priv->reg_base + reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Write SJA1000 register */
|
||||||
|
static void tscan1_write(const struct sja1000_priv *priv, int reg, u8 val)
|
||||||
|
{
|
||||||
|
outb(val, (unsigned long)priv->reg_base + reg);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Probe for a TS-CAN1 board with JP2:JP1 jumper setting ID */
|
||||||
|
static int __devinit tscan1_probe(struct device *dev, unsigned id)
|
||||||
|
{
|
||||||
|
struct net_device *netdev;
|
||||||
|
struct sja1000_priv *priv;
|
||||||
|
unsigned long pld_base, sja1000_base;
|
||||||
|
int irq, i;
|
||||||
|
|
||||||
|
pld_base = TSCAN1_PLD_ADDRESS + id * TSCAN1_PLD_SIZE;
|
||||||
|
if (!request_region(pld_base, TSCAN1_PLD_SIZE, dev_name(dev)))
|
||||||
|
return -EBUSY;
|
||||||
|
|
||||||
|
if (inb(pld_base + TSCAN1_ID1) != TSCAN1_ID1_VALUE ||
|
||||||
|
inb(pld_base + TSCAN1_ID2) != TSCAN1_ID2_VALUE) {
|
||||||
|
release_region(pld_base, TSCAN1_PLD_SIZE);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (inb(pld_base + TSCAN1_JUMPERS) & (TSCAN1_JP4 | TSCAN1_JP5)) {
|
||||||
|
case TSCAN1_JP4:
|
||||||
|
irq = 6;
|
||||||
|
break;
|
||||||
|
case TSCAN1_JP5:
|
||||||
|
irq = 7;
|
||||||
|
break;
|
||||||
|
case TSCAN1_JP4 | TSCAN1_JP5:
|
||||||
|
irq = 5;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
dev_err(dev, "invalid JP4:JP5 setting (no IRQ)\n");
|
||||||
|
release_region(pld_base, TSCAN1_PLD_SIZE);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
netdev = alloc_sja1000dev(0);
|
||||||
|
if (!netdev) {
|
||||||
|
release_region(pld_base, TSCAN1_PLD_SIZE);
|
||||||
|
return -ENOMEM;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev_set_drvdata(dev, netdev);
|
||||||
|
SET_NETDEV_DEV(netdev, dev);
|
||||||
|
|
||||||
|
netdev->base_addr = pld_base;
|
||||||
|
netdev->irq = irq;
|
||||||
|
|
||||||
|
priv = netdev_priv(netdev);
|
||||||
|
priv->read_reg = tscan1_read;
|
||||||
|
priv->write_reg = tscan1_write;
|
||||||
|
priv->can.clock.freq = TSCAN1_SJA1000_XTAL / 2;
|
||||||
|
priv->cdr = CDR_CBP | CDR_CLK_OFF;
|
||||||
|
priv->ocr = OCR_TX0_PUSHPULL;
|
||||||
|
|
||||||
|
/* Select the first SJA1000 IO address that is free and that works */
|
||||||
|
for (i = 0; i < ARRAY_SIZE(tscan1_sja1000_addresses); i++) {
|
||||||
|
sja1000_base = tscan1_sja1000_addresses[i];
|
||||||
|
if (!request_region(sja1000_base, TSCAN1_SJA1000_SIZE,
|
||||||
|
dev_name(dev)))
|
||||||
|
continue;
|
||||||
|
|
||||||
|
/* Set SJA1000 IO base address and enable it */
|
||||||
|
outb(TSCAN1_MODE_ENABLE | i, pld_base + TSCAN1_MODE);
|
||||||
|
|
||||||
|
priv->reg_base = (void __iomem *)sja1000_base;
|
||||||
|
if (!register_sja1000dev(netdev)) {
|
||||||
|
/* SJA1000 probe succeeded; turn LED off and return */
|
||||||
|
outb(0, pld_base + TSCAN1_LED);
|
||||||
|
netdev_info(netdev, "TS-CAN1 at 0x%lx 0x%lx irq %d\n",
|
||||||
|
pld_base, sja1000_base, irq);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* SJA1000 probe failed; release and try next address */
|
||||||
|
outb(0, pld_base + TSCAN1_MODE);
|
||||||
|
release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
|
||||||
|
}
|
||||||
|
|
||||||
|
dev_err(dev, "failed to assign SJA1000 IO address\n");
|
||||||
|
dev_set_drvdata(dev, NULL);
|
||||||
|
free_sja1000dev(netdev);
|
||||||
|
release_region(pld_base, TSCAN1_PLD_SIZE);
|
||||||
|
return -ENXIO;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __devexit tscan1_remove(struct device *dev, unsigned id /*unused*/)
|
||||||
|
{
|
||||||
|
struct net_device *netdev;
|
||||||
|
struct sja1000_priv *priv;
|
||||||
|
unsigned long pld_base, sja1000_base;
|
||||||
|
|
||||||
|
netdev = dev_get_drvdata(dev);
|
||||||
|
unregister_sja1000dev(netdev);
|
||||||
|
dev_set_drvdata(dev, NULL);
|
||||||
|
|
||||||
|
priv = netdev_priv(netdev);
|
||||||
|
pld_base = netdev->base_addr;
|
||||||
|
sja1000_base = (unsigned long)priv->reg_base;
|
||||||
|
|
||||||
|
outb(0, pld_base + TSCAN1_MODE); /* disable SJA1000 IO space */
|
||||||
|
|
||||||
|
release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
|
||||||
|
release_region(pld_base, TSCAN1_PLD_SIZE);
|
||||||
|
|
||||||
|
free_sja1000dev(netdev);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct isa_driver tscan1_isa_driver = {
|
||||||
|
.probe = tscan1_probe,
|
||||||
|
.remove = __devexit_p(tscan1_remove),
|
||||||
|
.driver = {
|
||||||
|
.name = "tscan1",
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init tscan1_init(void)
|
||||||
|
{
|
||||||
|
return isa_register_driver(&tscan1_isa_driver, TSCAN1_MAXDEV);
|
||||||
|
}
|
||||||
|
module_init(tscan1_init);
|
||||||
|
|
||||||
|
static void __exit tscan1_exit(void)
|
||||||
|
{
|
||||||
|
isa_unregister_driver(&tscan1_isa_driver);
|
||||||
|
}
|
||||||
|
module_exit(tscan1_exit);
|
Loading…
Reference in a new issue