USB OTG: Add generic driver for ULPI OTG transceiver
This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Daniel Mack
Greg Kroah-Hartman
parent
91c8a5a998
commit
2d57a95f09
|
|
@ -44,3 +44,5 @@ obj-y += early/
|
|||
|
||||
obj-$(CONFIG_USB_ATM) += atm/
|
||||
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
|
||||
|
||||
obj-$(CONFIG_USB_ULPI) += otg/
|
||||
|
|
|
|||
|
|
@ -41,6 +41,15 @@ config ISP1301_OMAP
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called isp1301_omap.
|
||||
|
||||
config USB_ULPI
|
||||
bool "Generic ULPI Transceiver Driver"
|
||||
depends on ARM
|
||||
help
|
||||
Enable this to support ULPI connected USB OTG transceivers which
|
||||
are likely found on embedded boards.
|
||||
|
||||
The only chip currently supported is NXP's ISP1504
|
||||
|
||||
config TWL4030_USB
|
||||
tristate "TWL4030 USB Transceiver Driver"
|
||||
depends on TWL4030_CORE && REGULATOR_TWL4030
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
|
|||
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
|
||||
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
|
||||
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
|
||||
obj-$(CONFIG_USB_ULPI) += ulpi.o
|
||||
|
||||
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
|
||||
ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
|
||||
|
|
|
|||
136
drivers/usb/otg/ulpi.c
Normal file
136
drivers/usb/otg/ulpi.c
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* Generic ULPI USB transceiver support
|
||||
*
|
||||
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
|
||||
*
|
||||
* Based on sources from
|
||||
*
|
||||
* Sascha Hauer <s.hauer@pengutronix.de>
|
||||
* Freescale Semiconductors
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
|
||||
/* ULPI register addresses */
|
||||
#define ULPI_VID_LOW 0x00 /* Vendor ID low */
|
||||
#define ULPI_VID_HIGH 0x01 /* Vendor ID high */
|
||||
#define ULPI_PID_LOW 0x02 /* Product ID low */
|
||||
#define ULPI_PID_HIGH 0x03 /* Product ID high */
|
||||
#define ULPI_ITFCTL 0x07 /* Interface Control */
|
||||
#define ULPI_OTGCTL 0x0A /* OTG Control */
|
||||
|
||||
/* add to above register address to access Set/Clear functions */
|
||||
#define ULPI_REG_SET 0x01
|
||||
#define ULPI_REG_CLEAR 0x02
|
||||
|
||||
/* ULPI OTG Control Register bits */
|
||||
#define ID_PULL_UP (1 << 0) /* enable ID Pull Up */
|
||||
#define DP_PULL_DOWN (1 << 1) /* enable DP Pull Down */
|
||||
#define DM_PULL_DOWN (1 << 2) /* enable DM Pull Down */
|
||||
#define DISCHRG_VBUS (1 << 3) /* Discharge Vbus */
|
||||
#define CHRG_VBUS (1 << 4) /* Charge Vbus */
|
||||
#define DRV_VBUS (1 << 5) /* Drive Vbus */
|
||||
#define DRV_VBUS_EXT (1 << 6) /* Drive Vbus external */
|
||||
#define USE_EXT_VBUS_IND (1 << 7) /* Use ext. Vbus indicator */
|
||||
|
||||
#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
|
||||
|
||||
#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0)
|
||||
|
||||
/* ULPI hardcoded IDs, used for probing */
|
||||
static unsigned int ulpi_ids[] = {
|
||||
ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */
|
||||
};
|
||||
|
||||
static int ulpi_set_flags(struct otg_transceiver *otg)
|
||||
{
|
||||
unsigned int flags = 0;
|
||||
|
||||
if (otg->flags & USB_OTG_PULLUP_ID)
|
||||
flags |= ID_PULL_UP;
|
||||
|
||||
if (otg->flags & USB_OTG_PULLDOWN_DM)
|
||||
flags |= DM_PULL_DOWN;
|
||||
|
||||
if (otg->flags & USB_OTG_PULLDOWN_DP)
|
||||
flags |= DP_PULL_DOWN;
|
||||
|
||||
if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
|
||||
flags |= USE_EXT_VBUS_IND;
|
||||
|
||||
return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET);
|
||||
}
|
||||
|
||||
static int ulpi_init(struct otg_transceiver *otg)
|
||||
{
|
||||
int i, vid, pid;
|
||||
|
||||
vid = (otg_io_read(otg, ULPI_VID_HIGH) << 8) |
|
||||
otg_io_read(otg, ULPI_VID_LOW);
|
||||
pid = (otg_io_read(otg, ULPI_PID_HIGH) << 8) |
|
||||
otg_io_read(otg, ULPI_PID_LOW);
|
||||
|
||||
pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++)
|
||||
if (ulpi_ids[i] == ULPI_ID(vid, pid))
|
||||
return ulpi_set_flags(otg);
|
||||
|
||||
pr_err("ULPI ID does not match any known transceiver.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
|
||||
{
|
||||
unsigned int flags = otg_io_read(otg, ULPI_OTGCTL);
|
||||
|
||||
flags &= ~(DRV_VBUS | DRV_VBUS_EXT);
|
||||
|
||||
if (on) {
|
||||
if (otg->flags & USB_OTG_DRV_VBUS)
|
||||
flags |= DRV_VBUS;
|
||||
|
||||
if (otg->flags & USB_OTG_DRV_VBUS_EXT)
|
||||
flags |= DRV_VBUS_EXT;
|
||||
}
|
||||
|
||||
return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET);
|
||||
}
|
||||
|
||||
struct otg_transceiver *
|
||||
otg_ulpi_create(struct otg_io_access_ops *ops,
|
||||
unsigned int flags)
|
||||
{
|
||||
struct otg_transceiver *otg;
|
||||
|
||||
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
|
||||
if (!otg)
|
||||
return NULL;
|
||||
|
||||
otg->label = "ULPI";
|
||||
otg->flags = flags;
|
||||
otg->io_ops = ops;
|
||||
otg->init = ulpi_init;
|
||||
otg->set_vbus = ulpi_set_vbus;
|
||||
|
||||
return otg;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(otg_ulpi_create);
|
||||
|
||||
7
include/linux/usb/ulpi.h
Normal file
7
include/linux/usb/ulpi.h
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
#ifndef __LINUX_USB_ULPI_H
|
||||
#define __LINUX_USB_ULPI_H
|
||||
|
||||
struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
|
||||
unsigned int flags);
|
||||
|
||||
#endif /* __LINUX_USB_ULPI_H */
|
||||
Loading…
Reference in a new issue