sound: ASoC: Add WM8750 SPI support

Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit is contained in:
Mark Brown 2008-09-16 12:51:26 +01:00 committed by Jaroslav Kysela
parent ccbc301e53
commit 2f3dfaf5da
2 changed files with 70 additions and 1 deletions

View file

@ -19,6 +19,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@ -841,7 +842,7 @@ static struct snd_soc_device *wm8750_socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* WM8731 2 wire address is determined by GPIO5
* WM8750 2 wire address is determined by GPIO5
* state during powerup.
* low = 0x1a
* high = 0x1b
@ -928,6 +929,62 @@ err_driver:
}
#endif
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8750_spi_probe(struct spi_device *spi)
{
struct snd_soc_device *socdev = wm8750_socdev;
struct snd_soc_codec *codec = socdev->codec;
int ret;
codec->control_data = spi;
ret = wm8750_init(socdev);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8750\n");
return ret;
}
static int __devexit wm8750_spi_remove(struct spi_device *spi)
{
return 0;
}
static struct spi_driver wm8750_spi_driver = {
.driver = {
.name = "wm8750",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8750_spi_probe,
.remove = __devexit_p(wm8750_spi_remove),
};
static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
{
struct spi_transfer t;
struct spi_message m;
u8 msg[2];
if (len <= 0)
return 0;
msg[0] = data[0];
msg[1] = data[1];
spi_message_init(&m);
memset(&t, 0, (sizeof t));
t.tx_buf = &msg[0];
t.len = len;
spi_message_add_tail(&t, &m);
spi_sync(spi, &m);
return len;
}
#endif
static int wm8750_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
@ -963,6 +1020,14 @@ static int wm8750_probe(struct platform_device *pdev)
ret = wm8750_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
codec->hw_write = (hw_write_t)wm8750_spi_write;
ret = spi_register_driver(&wm8750_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
}
#endif
if (ret != 0) {
kfree(codec->private_data);
@ -1004,6 +1069,9 @@ static int wm8750_remove(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8750_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8750_spi_driver);
#endif
kfree(codec->private_data);
kfree(codec);

View file

@ -58,6 +58,7 @@
#define WM8750_SYSCLK 0
struct wm8750_setup_data {
int spi;
int i2c_bus;
unsigned short i2c_address;
};