[media] au0828: add support for IR on HVR-950Q
HVR-950Q uses an I2C remote controller at address 0x47 (7-bits notation). Add support for it. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This commit is contained in:
Mauro Carvalho Chehab
parent
32570579cb
commit
2fcfd317f6
|
|
@ -27,3 +27,10 @@ config VIDEO_AU0828_V4L2
|
|||
|
||||
Choose Y here to include support for v4l2 analog video
|
||||
capture within the au0828 driver.
|
||||
|
||||
config VIDEO_AU0828_RC
|
||||
bool "AU0828 Remote Controller support"
|
||||
depends on RC_CORE
|
||||
depends on VIDEO_AU0828
|
||||
---help---
|
||||
Enables Remote Controller support on au0828 driver.
|
||||
|
|
|
|||
|
|
@ -4,6 +4,10 @@ ifeq ($(CONFIG_VIDEO_AU0828_V4L2),y)
|
|||
au0828-objs += au0828-video.o au0828-vbi.o
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_VIDEO_AU0828_RC),y)
|
||||
au0828-objs += au0828-input.o
|
||||
endif
|
||||
|
||||
obj-$(CONFIG_VIDEO_AU0828) += au0828.o
|
||||
|
||||
ccflags-y += -Idrivers/media/tuners
|
||||
|
|
|
|||
|
|
@ -71,6 +71,7 @@ struct au0828_board au0828_boards[] = {
|
|||
.name = "Hauppauge HVR950Q",
|
||||
.tuner_type = TUNER_XC5000,
|
||||
.tuner_addr = 0x61,
|
||||
.has_ir_i2c = 1,
|
||||
/* The au0828 hardware i2c implementation does not properly
|
||||
support the xc5000's i2c clock stretching. So we need to
|
||||
lower the clock frequency enough where the 15us clock
|
||||
|
|
|
|||
|
|
@ -32,10 +32,12 @@
|
|||
* 2 = USB handling
|
||||
* 4 = I2C related
|
||||
* 8 = Bridge related
|
||||
* 16 = IR related
|
||||
*/
|
||||
int au0828_debug;
|
||||
module_param_named(debug, au0828_debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "enable debug messages");
|
||||
MODULE_PARM_DESC(debug,
|
||||
"set debug bitmask: 1=general, 2=USB, 4=I2C, 8=bridge, 16=IR");
|
||||
|
||||
static unsigned int disable_usb_speed_check;
|
||||
module_param(disable_usb_speed_check, int, 0444);
|
||||
|
|
@ -151,6 +153,9 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
|
|||
|
||||
dprintk(1, "%s()\n", __func__);
|
||||
|
||||
#ifdef CONFIG_VIDEO_AU0828_RC
|
||||
au0828_rc_unregister(dev);
|
||||
#endif
|
||||
/* Digital TV */
|
||||
au0828_dvb_unregister(dev);
|
||||
|
||||
|
|
@ -261,9 +266,15 @@ static int au0828_usb_probe(struct usb_interface *interface,
|
|||
pr_err("%s() au0282_dev_register failed\n",
|
||||
__func__);
|
||||
|
||||
#ifdef CONFIG_VIDEO_AU0828_RC
|
||||
/* Remote controller */
|
||||
au0828_rc_register(dev);
|
||||
#endif
|
||||
|
||||
/* Store the pointer to the au0828_dev so it can be accessed in
|
||||
au0828_usb_disconnect */
|
||||
/*
|
||||
* Store the pointer to the au0828_dev so it can be accessed in
|
||||
* au0828_usb_disconnect
|
||||
*/
|
||||
usb_set_intfdata(interface, dev);
|
||||
|
||||
printk(KERN_INFO "Registered device AU0828 [%s]\n",
|
||||
|
|
@ -279,6 +290,8 @@ static struct usb_driver au0828_usb_driver = {
|
|||
.probe = au0828_usb_probe,
|
||||
.disconnect = au0828_usb_disconnect,
|
||||
.id_table = au0828_usb_id_table,
|
||||
|
||||
/* FIXME: Add suspend and resume functions */
|
||||
};
|
||||
|
||||
static int __init au0828_init(void)
|
||||
|
|
@ -298,6 +311,10 @@ static int __init au0828_init(void)
|
|||
printk(KERN_INFO "%s() Bridge Debugging is enabled\n",
|
||||
__func__);
|
||||
|
||||
if (au0828_debug & 16)
|
||||
printk(KERN_INFO "%s() IR Debugging is enabled\n",
|
||||
__func__);
|
||||
|
||||
printk(KERN_INFO "au0828 driver loaded\n");
|
||||
|
||||
ret = usb_register(&au0828_usb_driver);
|
||||
|
|
@ -318,4 +335,4 @@ module_exit(au0828_exit);
|
|||
MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
|
||||
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION("0.0.2");
|
||||
MODULE_VERSION("0.0.3");
|
||||
|
|
|
|||
386
drivers/media/usb/au0828/au0828-input.c
Normal file
386
drivers/media/usb/au0828/au0828-input.c
Normal file
|
|
@ -0,0 +1,386 @@
|
|||
/*
|
||||
handle au0828 IR remotes via linux kernel input layer.
|
||||
|
||||
Copyright (C) 2014 Mauro Carvalho Chehab <mchehab@samsung.com>
|
||||
Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
||||
|
||||
Based on em28xx-input.c.
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/slab.h>
|
||||
#include <media/rc-core.h>
|
||||
|
||||
#include "au0828.h"
|
||||
|
||||
struct au0828_rc {
|
||||
struct au0828_dev *dev;
|
||||
struct rc_dev *rc;
|
||||
char name[32];
|
||||
char phys[32];
|
||||
|
||||
/* poll decoder */
|
||||
int polling;
|
||||
struct delayed_work work;
|
||||
|
||||
/* i2c slave address of external device (if used) */
|
||||
u16 i2c_dev_addr;
|
||||
|
||||
int (*get_key_i2c)(struct au0828_rc *ir);
|
||||
};
|
||||
|
||||
/*
|
||||
* AU8522 has a builtin IR receiver. Add functions to get IR from it
|
||||
*/
|
||||
|
||||
static int au8522_rc_write(struct au0828_rc *ir, u16 reg, u8 data)
|
||||
{
|
||||
int rc;
|
||||
char buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };
|
||||
struct i2c_msg msg = { .addr = ir->i2c_dev_addr, .flags = 0,
|
||||
.buf = buf, .len = sizeof(buf) };
|
||||
|
||||
rc = i2c_transfer(ir->dev->i2c_client.adapter, &msg, 1);
|
||||
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
return (rc == 1) ? 0 : -EIO;
|
||||
}
|
||||
|
||||
static int au8522_rc_read(struct au0828_rc *ir, u16 reg, int val,
|
||||
char *buf, int size)
|
||||
{
|
||||
int rc;
|
||||
char obuf[3];
|
||||
struct i2c_msg msg[2] = { { .addr = ir->i2c_dev_addr, .flags = 0,
|
||||
.buf = obuf, .len = 2 },
|
||||
{ .addr = ir->i2c_dev_addr, .flags = I2C_M_RD,
|
||||
.buf = buf, .len = size } };
|
||||
|
||||
obuf[0] = 0x40 | reg >> 8;
|
||||
obuf[1] = reg & 0xff;
|
||||
if (val >= 0) {
|
||||
obuf[2] = val;
|
||||
msg[0].len++;
|
||||
}
|
||||
|
||||
rc = i2c_transfer(ir->dev->i2c_client.adapter, msg, 2);
|
||||
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
return (rc == 2) ? 0 : -EIO;
|
||||
}
|
||||
|
||||
static int au8522_rc_andor(struct au0828_rc *ir, u16 reg, u8 mask, u8 value)
|
||||
{
|
||||
int rc;
|
||||
char buf;
|
||||
|
||||
rc = au8522_rc_read(ir, reg, -1, &buf, 1);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
buf = (buf & ~mask) | (value & mask);
|
||||
|
||||
return au8522_rc_write(ir, reg, buf);
|
||||
}
|
||||
|
||||
#define au8522_rc_set(ir, reg, bit) au8522_rc_andor(ir, (reg), (bit), (bit))
|
||||
#define au8522_rc_clear(ir, reg, bit) au8522_rc_andor(ir, (reg), (bit), 0)
|
||||
|
||||
/* Remote Controller time units */
|
||||
|
||||
#define AU8522_UNIT 200000 /* ns */
|
||||
#define NEC_START_SPACE (4500000 / AU8522_UNIT)
|
||||
#define NEC_START_PULSE (562500 * 16)
|
||||
#define RC5_START_SPACE (4 * AU8522_UNIT)
|
||||
#define RC5_START_PULSE 888888
|
||||
|
||||
static int au0828_get_key_au8522(struct au0828_rc *ir)
|
||||
{
|
||||
unsigned char buf[40];
|
||||
DEFINE_IR_RAW_EVENT(rawir);
|
||||
int i, j, rc;
|
||||
int prv_bit, bit, width;
|
||||
bool first = true;
|
||||
|
||||
/* Check IR int */
|
||||
rc = au8522_rc_read(ir, 0xe1, -1, buf, 1);
|
||||
if (rc < 0 || !(buf[0] & (1 << 4)))
|
||||
return 0;
|
||||
|
||||
/* Something arrived. Get the data */
|
||||
rc = au8522_rc_read(ir, 0xe3, 0x11, buf, sizeof(buf));
|
||||
|
||||
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* Disable IR */
|
||||
au8522_rc_clear(ir, 0xe0, 1 << 4);
|
||||
|
||||
usleep_range(45000, 46000);
|
||||
|
||||
/* Enable IR */
|
||||
au8522_rc_set(ir, 0xe0, 1 << 4);
|
||||
|
||||
dprintk(16, "RC data received: %*ph\n", 40, buf);
|
||||
|
||||
prv_bit = (buf[0] >> 7) & 0x01;
|
||||
width = 0;
|
||||
for (i = 0; i < sizeof(buf); i++) {
|
||||
for (j = 7; j >= 0; j--) {
|
||||
bit = (buf[i] >> j) & 0x01;
|
||||
if (bit == prv_bit) {
|
||||
width++;
|
||||
continue;
|
||||
}
|
||||
|
||||
/*
|
||||
* Fix an au8522 bug: the first pulse event
|
||||
* is lost. So, we need to fake it, based on the
|
||||
* protocol. That means that not all raw decoders
|
||||
* will work, as we need to add a hack for each
|
||||
* protocol, based on the first space.
|
||||
* So, we only support RC5 and NEC.
|
||||
*/
|
||||
|
||||
if (first) {
|
||||
first = false;
|
||||
|
||||
init_ir_raw_event(&rawir);
|
||||
rawir.pulse = true;
|
||||
if (width > NEC_START_SPACE - 2 &&
|
||||
width < NEC_START_SPACE + 2) {
|
||||
/* NEC protocol */
|
||||
rawir.duration = NEC_START_PULSE;
|
||||
dprintk(16, "Storing NEC start %s with duration %d",
|
||||
rawir.pulse ? "pulse" : "space",
|
||||
rawir.duration);
|
||||
} else {
|
||||
/* RC5 protocol */
|
||||
rawir.duration = RC5_START_PULSE;
|
||||
dprintk(16, "Storing RC5 start %s with duration %d",
|
||||
rawir.pulse ? "pulse" : "space",
|
||||
rawir.duration);
|
||||
}
|
||||
ir_raw_event_store(ir->rc, &rawir);
|
||||
}
|
||||
|
||||
init_ir_raw_event(&rawir);
|
||||
rawir.pulse = prv_bit ? false : true;
|
||||
rawir.duration = AU8522_UNIT * width;
|
||||
dprintk(16, "Storing %s with duration %d",
|
||||
rawir.pulse ? "pulse" : "space",
|
||||
rawir.duration);
|
||||
ir_raw_event_store(ir->rc, &rawir);
|
||||
|
||||
width = 1;
|
||||
prv_bit = bit;
|
||||
}
|
||||
}
|
||||
|
||||
init_ir_raw_event(&rawir);
|
||||
rawir.pulse = prv_bit ? false : true;
|
||||
rawir.duration = AU8522_UNIT * width;
|
||||
dprintk(16, "Storing end %s with duration %d",
|
||||
rawir.pulse ? "pulse" : "space",
|
||||
rawir.duration);
|
||||
ir_raw_event_store(ir->rc, &rawir);
|
||||
|
||||
ir_raw_event_handle(ir->rc);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Generic IR code
|
||||
*/
|
||||
|
||||
static void au0828_rc_work(struct work_struct *work)
|
||||
{
|
||||
struct au0828_rc *ir = container_of(work, struct au0828_rc, work.work);
|
||||
int rc;
|
||||
|
||||
rc = ir->get_key_i2c(ir);
|
||||
if (rc < 0)
|
||||
pr_info("Error while getting RC scancode\n");
|
||||
|
||||
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
|
||||
}
|
||||
|
||||
static int au0828_rc_start(struct rc_dev *rc)
|
||||
{
|
||||
struct au0828_rc *ir = rc->priv;
|
||||
|
||||
INIT_DELAYED_WORK(&ir->work, au0828_rc_work);
|
||||
|
||||
/* Enable IR */
|
||||
au8522_rc_set(ir, 0xe0, 1 << 4);
|
||||
|
||||
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void au0828_rc_stop(struct rc_dev *rc)
|
||||
{
|
||||
struct au0828_rc *ir = rc->priv;
|
||||
|
||||
/* Disable IR */
|
||||
au8522_rc_clear(ir, 0xe0, 1 << 4);
|
||||
|
||||
cancel_delayed_work_sync(&ir->work);
|
||||
}
|
||||
|
||||
static int au0828_probe_i2c_ir(struct au0828_dev *dev)
|
||||
{
|
||||
int i = 0;
|
||||
const unsigned short addr_list[] = {
|
||||
0x47, I2C_CLIENT_END
|
||||
};
|
||||
|
||||
while (addr_list[i] != I2C_CLIENT_END) {
|
||||
if (i2c_probe_func_quick_read(dev->i2c_client.adapter,
|
||||
addr_list[i]) == 1)
|
||||
return addr_list[i];
|
||||
i++;
|
||||
}
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
int au0828_rc_register(struct au0828_dev *dev)
|
||||
{
|
||||
struct au0828_rc *ir;
|
||||
struct rc_dev *rc;
|
||||
int err = -ENOMEM;
|
||||
u16 i2c_rc_dev_addr = 0;
|
||||
|
||||
if (!dev->board.has_ir_i2c)
|
||||
return 0;
|
||||
|
||||
i2c_rc_dev_addr = au0828_probe_i2c_ir(dev);
|
||||
if (!i2c_rc_dev_addr)
|
||||
return -ENODEV;
|
||||
|
||||
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
|
||||
rc = rc_allocate_device();
|
||||
if (!ir || !rc)
|
||||
goto error;
|
||||
|
||||
/* record handles to ourself */
|
||||
ir->dev = dev;
|
||||
dev->ir = ir;
|
||||
ir->rc = rc;
|
||||
|
||||
rc->priv = ir;
|
||||
rc->open = au0828_rc_start;
|
||||
rc->close = au0828_rc_stop;
|
||||
|
||||
if (dev->board.has_ir_i2c) { /* external i2c device */
|
||||
switch (dev->boardnr) {
|
||||
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
|
||||
rc->map_name = RC_MAP_HAUPPAUGE;
|
||||
ir->get_key_i2c = au0828_get_key_au8522;
|
||||
break;
|
||||
default:
|
||||
err = -ENODEV;
|
||||
goto error;
|
||||
}
|
||||
|
||||
ir->i2c_dev_addr = i2c_rc_dev_addr;
|
||||
}
|
||||
|
||||
/* This is how often we ask the chip for IR information */
|
||||
ir->polling = 100; /* ms */
|
||||
|
||||
/* init input device */
|
||||
snprintf(ir->name, sizeof(ir->name), "au0828 IR (%s)",
|
||||
dev->board.name);
|
||||
|
||||
usb_make_path(dev->usbdev, ir->phys, sizeof(ir->phys));
|
||||
strlcat(ir->phys, "/input0", sizeof(ir->phys));
|
||||
|
||||
rc->input_name = ir->name;
|
||||
rc->input_phys = ir->phys;
|
||||
rc->input_id.bustype = BUS_USB;
|
||||
rc->input_id.version = 1;
|
||||
rc->input_id.vendor = le16_to_cpu(dev->usbdev->descriptor.idVendor);
|
||||
rc->input_id.product = le16_to_cpu(dev->usbdev->descriptor.idProduct);
|
||||
rc->dev.parent = &dev->usbdev->dev;
|
||||
rc->driver_name = "au0828-input";
|
||||
rc->driver_type = RC_DRIVER_IR_RAW;
|
||||
rc->allowed_protocols = RC_BIT_NEC | RC_BIT_RC5;
|
||||
|
||||
/* all done */
|
||||
err = rc_register_device(rc);
|
||||
if (err)
|
||||
goto error;
|
||||
|
||||
pr_info("Remote controller %s initalized\n", ir->name);
|
||||
|
||||
return 0;
|
||||
|
||||
error:
|
||||
dev->ir = NULL;
|
||||
rc_free_device(rc);
|
||||
kfree(ir);
|
||||
return err;
|
||||
}
|
||||
|
||||
void au0828_rc_unregister(struct au0828_dev *dev)
|
||||
{
|
||||
struct au0828_rc *ir = dev->ir;
|
||||
|
||||
/* skip detach on non attached boards */
|
||||
if (!ir)
|
||||
return;
|
||||
|
||||
if (ir->rc)
|
||||
rc_unregister_device(ir->rc);
|
||||
|
||||
/* done */
|
||||
kfree(ir);
|
||||
dev->ir = NULL;
|
||||
}
|
||||
|
||||
int au0828_rc_suspend(struct au0828_dev *dev)
|
||||
{
|
||||
struct au0828_rc *ir = dev->ir;
|
||||
|
||||
if (!ir)
|
||||
return 0;
|
||||
|
||||
cancel_delayed_work_sync(&ir->work);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int au0828_rc_resume(struct au0828_dev *dev)
|
||||
{
|
||||
struct au0828_rc *ir = dev->ir;
|
||||
|
||||
if (!ir)
|
||||
return 0;
|
||||
|
||||
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -88,6 +88,7 @@ struct au0828_board {
|
|||
unsigned int tuner_type;
|
||||
unsigned char tuner_addr;
|
||||
unsigned char i2c_clk_divider;
|
||||
unsigned char has_ir_i2c:1;
|
||||
struct au0828_input input[AU0828_MAX_INPUT];
|
||||
|
||||
};
|
||||
|
|
@ -213,6 +214,10 @@ struct au0828_dev {
|
|||
struct v4l2_device v4l2_dev;
|
||||
struct v4l2_ctrl_handler v4l2_ctrl_hdl;
|
||||
#endif
|
||||
#ifdef CONFIG_VIDEO_AU0828_RC
|
||||
struct au0828_rc *ir;
|
||||
#endif
|
||||
|
||||
int users;
|
||||
unsigned int resources; /* resources in use */
|
||||
struct video_device *vdev;
|
||||
|
|
@ -319,3 +324,9 @@ extern struct videobuf_queue_ops au0828_vbi_qops;
|
|||
do { if (au0828_debug & level)\
|
||||
printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
|
||||
} while (0)
|
||||
|
||||
/* au0828-input.c */
|
||||
int au0828_rc_register(struct au0828_dev *dev);
|
||||
void au0828_rc_unregister(struct au0828_dev *dev);
|
||||
int au0828_rc_suspend(struct au0828_dev *dev);
|
||||
int au0828_rc_resume(struct au0828_dev *dev);
|
||||
|
|
|
|||
Loading…
Reference in a new issue