redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

[TG3]: Setup proper GPIO settings 

Setup proper GPIO settings in tp->grc_local_ctrl before calling
tg3_set_power() state in tg3_get_invariants() and after chip reset.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wifi-calibration
Michael Chan 2005-04-21 17:07:04 -07:00 committed by David S. Miller
parent 7d0c41ef89
commit 314fba348e
1 changed files with 28 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
drivers/net/tg3.c
View File

@ -5336,10 +5336,23 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
udelay(40);
tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
* If TG3_FLAG_EEPROM_WRITE_PROT is set, we should read the
* register to preserve the GPIO settings for LOMs. The GPIOs,
* whether used as inputs or outputs, are set by boot code after
* reset.
*/
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
u32 gpio_mask;
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 |
GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2;
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
/* GPIO1 must be driven high for eeprom write protect */
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
}
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
@ -7430,8 +7443,8 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
}
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
GRC_LCLCTRL_GPIO_OE1);
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
udelay(40);
}
@ -7477,8 +7490,7 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
}
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
GRC_LCLCTRL_GPIO_OE1 | GRC_LCLCTRL_GPIO_OUTPUT1);
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(40);
}
@ -8045,6 +8057,16 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
*/
tg3_get_eeprom_hw_cfg(tp);
/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
* GPIO1 driven high will bring 5700's external PHY out of reset.
* It is also used as eeprom write protect on LOMs.
*/
tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
/* Force the chip into D0. */
err = tg3_set_power_state(tp, 0);
if (err) {