Merge upstream 2.6.13-rc3 into ieee80211 branch of netdev-2.6.

This commit is contained in:
Jeff Garzik 2005-07-13 16:23:51 -04:00
commit 327309e899
1484 changed files with 74956 additions and 52600 deletions

View file

@ -57,7 +57,7 @@ o e2fsprogs 1.29 # tune2fs
o jfsutils 1.1.3 # fsck.jfs -V
o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs
o xfsprogs 2.6.0 # xfs_db -V
o pcmciautils 001
o pcmciautils 004
o pcmcia-cs 3.1.21 # cardmgr -V
o quota-tools 3.09 # quota -V
o PPP 2.4.0 # pppd --version

View file

@ -0,0 +1,35 @@
driver/acpi/hotkey.c implement:
1. /proc/acpi/hotkey/event_config
(event based hotkey or event config interface):
a. add a event based hotkey(event) :
echo "0:bus::action:method:num:num" > event_config
b. delete a event based hotkey(event):
echo "1:::::num:num" > event_config
c. modify a event based hotkey(event):
echo "2:bus::action:method:num:num" > event_config
2. /proc/acpi/hotkey/poll_config
(polling based hotkey or event config interface):
a.add a polling based hotkey(event) :
echo "0:bus:method:action:method:num" > poll_config
this adding command will create a proc file
/proc/acpi/hotkey/method, which is used to get
result of polling.
b.delete a polling based hotkey(event):
echo "1:::::num" > event_config
c.modify a polling based hotkey(event):
echo "2:bus:method:action:method:num" > poll_config
3./proc/acpi/hotkey/action
(interface to call aml method associated with a
specific hotkey(event))
echo "event_num:event_type:event_argument" >
/proc/acpi/hotkey/action.
The result of the execution of this aml method is
attached to /proc/acpi/hotkey/poll_method, which is dnyamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.

View file

@ -13,14 +13,17 @@ different way: With the help of a dvb-usb-framework.
The framework provides generic functions (mostly kernel API calls), such as:
- Transport Stream URB handling in conjunction with dvb-demux-feed-control
(bulk and isoc (TODO) are supported)
(bulk and isoc are supported)
- registering the device for the DVB-API
- registering an I2C-adapter if applicable
- remote-control/input-device handling
- firmware requesting and loading (currently just for the Cypress USB
controller)
controllers)
- other functions/methods which can be shared by several drivers (such as
functions for bulk-control-commands)
- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses
depending on length of a register and the number of values that can be
multi-written and multi-read.
The source code of the particular DVB USB devices does just the communication
with the device via the bus. The connection between the DVB-API-functionality
@ -36,93 +39,18 @@ the dvb-usb-lib.
TODO: dynamic enabling and disabling of the pid-filter in regard to number of
feeds requested.
Supported devices USB1.1
Supported devices
========================
Produced and reselled by Twinhan:
---------------------------------
- TwinhanDTV USB-Ter DVB-T Device (VP7041)
http://www.twinhan.com/product_terrestrial_3.asp
See the LinuxTV DVB Wiki at www.linuxtv.org for a complete list of
cards/drivers/firmwares:
- TwinhanDTV Magic Box (VP7041e)
http://www.twinhan.com/product_terrestrial_4.asp
- HAMA DVB-T USB device
http://www.hama.de/portal/articleId*110620/action*2598
- CTS Portable (Chinese Television System) (2)
http://www.2cts.tv/ctsportable/
- Unknown USB DVB-T device with vendor ID Hyper-Paltek
Produced and reselled by KWorld:
--------------------------------
- KWorld V-Stream XPERT DTV DVB-T USB
http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
- JetWay DTV DVB-T USB
http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
- ADSTech Instant TV DVB-T USB
http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
Others:
-------
- Ultima Electronic/Artec T1 USB TVBOX (AN2135, AN2235, AN2235 with Panasonic Tuner)
http://82.161.246.249/products-tvbox.html
- Compro Videomate DVB-U2000 - DVB-T USB (2)
http://www.comprousa.com/products/vmu2000.htm
- Grandtec USB DVB-T
http://www.grand.com.tw/
- AVerMedia AverTV DVBT USB
http://www.avermedia.com/
- DiBcom USB DVB-T reference device (non-public)
Supported devices USB2.0-only
=============================
- Twinhan MagicBox II
http://www.twinhan.com/product_terrestrial_7.asp
- TwinhanDTV Alpha
http://www.twinhan.com/product_terrestrial_8.asp
- DigitalNow TinyUSB 2 DVB-t Receiver
http://www.digitalnow.com.au/DigitalNow%20tinyUSB2%20Specifications.html
- Hanftek UMT-010
http://www.globalsources.com/si/6008819757082/ProductDetail/Digital-TV/product_id-100046529
Supported devices USB2.0 and USB1.1
=============================
- Typhoon/Yakumo/HAMA/Yuan DVB-T mobile USB2.0
http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
http://www.yuan.com.tw/en/products/vdo_ub300.html
http://www.hama.de/portal/articleId*114663/action*2563
http://www.anubisline.com/english/articlec.asp?id=50502&catid=002
- Artec T1 USB TVBOX (FX2) (2)
- Hauppauge WinTV NOVA-T USB2
http://www.hauppauge.com/
- KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B)
- DiBcom USB2.0 DVB-T reference device (non-public)
- AVerMedia AverTV A800 DVB-T USB2.0
1) It is working almost - work-in-progress.
2) No test reports received yet.
http://www.linuxtv.org/wiki/index.php/DVB_USB
0. History & News:
2005-06-30 - added support for WideView WT-220U (Thanks to Steve Chang)
2005-05-30 - added basic isochronous support to the dvb-usb-framework
added support for Conexant Hybrid reference design and Nebula DigiTV USB
2005-04-17 - all dibusb devices ported to make use of the dvb-usb-framework
2005-04-02 - re-enabled and improved remote control code.
2005-03-31 - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb.
@ -137,7 +65,7 @@ Supported devices USB2.0 and USB1.1
2005-01-31 - distorted streaming is gone for USB1.1 devices
2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
- first almost working version for HanfTek UMT-010
- found out, that Yakumo/HAMA/Typhoon are predessors of the HanfTek UMT-010
- found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010
2005-01-10 - refactoring completed, now everything is very delightful
- tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
@ -187,25 +115,13 @@ Supported devices USB2.0 and USB1.1
1. How to use?
1.1. Firmware
Most of the USB drivers need to download a firmware to start working.
Most of the USB drivers need to download a firmware to the device before start
working.
for USB1.1 (AN2135) you need: dvb-usb-dibusb-5.0.0.11.fw
for USB2.0 HanfTek: dvb-usb-umt-010-02.fw
for USB2.0 DiBcom: dvb-usb-dibusb-6.0.0.8.fw
for USB2.0 AVerMedia AverTV DVB-T USB2: dvb-usb-avertv-a800-01.fw
for USB2.0 TwinhanDTV Alpha/MagicBox II: dvb-usb-vp7045-01.fw
Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
you need for your device:
The files can be found on http://www.linuxtv.org/download/firmware/ .
We do not have the permission (yet) to publish the following firmware-files.
You'll need to extract them from the windows drivers.
You should be able to use "get_dvb_firmware dvb-usb" to get the firmware:
for USB1.1 (AN2235) (a few Artec T1 devices): dvb-usb-dibusb-an2235-01.fw
for USB2.0 Hauppauge: dvb-usb-nova-t-usb2-01.fw
for USB2.0 ADSTech/Kworld USB2.0: dvb-usb-adstech-usb2-01.fw
for USB2.0 Yakumo/Typhoon/Hama: dvb-usb-dtt200u-01.fw
http://www.linuxtv.org/wiki/index.php/DVB_USB
1.2. Compiling
@ -289,6 +205,9 @@ Patches, comments and suggestions are very very welcome.
Gunnar Wittich and Joachim von Caron for their trust for providing
root-shells on their machines to implement support for new devices.
Allan Third and Michael Hutchinson for their help to write the Nebula
digitv-driver.
Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei
Jung from AVerMedia who kindly provided a special firmware to get the device
up and running in Linux.
@ -296,7 +215,12 @@ Patches, comments and suggestions are very very welcome.
Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by
writing the vp7045-driver.
Some guys on the linux-dvb mailing list for encouraging me
Steve Chang from WideView for providing information for new devices and
firmware files.
Michael Paxton for submitting remote control keymaps.
Some guys on the linux-dvb mailing list for encouraging me.
Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
user-level firmware loader, which saves a lot of time
@ -305,4 +229,4 @@ Patches, comments and suggestions are very very welcome.
Ulf Hermenau for helping me out with traditional chinese.
André Smoktun and Christian Frömmel for supporting me with
hardware and listening to my problems very patient.
hardware and listening to my problems very patiently.

View file

@ -1,66 +1,55 @@
How to get the Nebula, PCTV and Twinhan DST cards working
=========================================================
How to get the Nebula Electronics DigiTV, Pinnacle PCTV Sat, Twinhan DST + clones working
=========================================================================================
This class of cards has a bt878a as the PCI interface, and
require the bttv driver.
1) General information
======================
Please pay close attention to the warning about the bttv module
options below for the DST card.
This class of cards has a bt878a chip as the PCI interface.
The different card drivers require the bttv driver to provide the means
to access the i2c bus and the gpio pins of the bt8xx chipset.
1) General informations
=======================
2) Compilation rules for Kernel >= 2.6.12
=========================================
These drivers require the bttv driver to provide the means to access
the i2c bus and the gpio pins of the bt8xx chipset.
Enable the following options:
Because of this, you need to enable
"Device drivers" => "Multimedia devices"
=> "Video For Linux" => "BT848 Video For Linux"
Furthermore you need to enable
=> "Video For Linux" => "BT848 Video For Linux"
"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
=> "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
=> "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
2) Loading Modules
==================
3) Loading Modules, described by two approaches
===============================================
In general you need to load the bttv driver, which will handle the gpio and
i2c communication for us, plus the common dvb-bt8xx device driver.
The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
i2c communication for us, plus the common dvb-bt8xx device driver,
which is called the backend.
The frontends for Nebula DigiTV (nxt6000), Pinnacle PCTV Sat (cx24110),
TwinHan DST + clones (dst and dst-ca) are loaded automatically by the backend.
For further details about TwinHan DST + clones see /Documentation/dvb/ci.txt.
3a) Nebula / Pinnacle PCTV
3a) The manual approach
-----------------------
Loading modules:
modprobe bttv
modprobe dvb-bt8xx
Unloading modules:
modprobe -r dvb-bt8xx
modprobe -r bttv
3b) The automatic approach
--------------------------
$ modprobe bttv (normally bttv is being loaded automatically by kmod)
$ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
If not already done by installation, place a line either in
/etc/modules.conf or in /etc/modprobe.conf containing this text:
alias char-major-81 bttv
Then place a line in /etc/modules containing this text:
dvb-bt8xx
3b) TwinHan and Clones
--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
The value 0x71 will override the PCI type detection for dvb-bt8xx,
which is necessary for TwinHan cards.
If you're having an older card (blue color circuit) and card=0x71 locks
your machine, try using 0x68, too. If that does not work, ask on the
mailing list.
The DST module takes a couple of useful parameters:
a. verbose takes values 0 to 5. These values control the verbosity level.
b. debug takes values 0 and 1. You can either disable or enable debugging.
c. dst_addons takes values 0 and 0x20:
- A value of 0 means it is a FTA card.
- A value of 0x20 means it has a Conditional Access slot.
The autodetected values are determined by the "response string"
of the card, which you can see in your logs:
e.g.: dst_get_device_id: Recognize [DSTMCI]
Reboot your system and have fun!
--
Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham, Uwe Bugla

View file

@ -119,3 +119,19 @@ Why: Match the other drivers' name for the same function, duplicate names
will be available until removal of old names.
Who: Grant Coady <gcoady@gmail.com>
---------------------------
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
normal hotpluggable bus, and with it using the default kernel
infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
control ioctl needed by cardmgr and cardctl from pcmcia-cs is
unnecessary, and makes further cleanups and integration of the
PCMCIA subsystem into the Linux kernel device driver model more
difficult. The features provided by cardmgr and cardctl are either
handled by the kernel itself now or are available in the new
pcmciautils package available at
http://kernel.org/pub/linux/utils/kernel/pcmcia/
Who: Dominik Brodowski <linux@brodo.de>

View file

@ -0,0 +1,138 @@
inotify
a powerful yet simple file change notification system
Document started 15 Mar 2005 by Robert Love <rml@novell.com>
(i) User Interface
Inotify is controlled by a set of three sys calls
First step in using inotify is to initialise an inotify instance
int fd = inotify_init ();
Change events are managed by "watches". A watch is an (object,mask) pair where
the object is a file or directory and the mask is a bit mask of one or more
inotify events that the application wishes to receive. See <linux/inotify.h>
for valid events. A watch is referenced by a watch descriptor, or wd.
Watches are added via a path to the file.
Watches on a directory will return events on any files inside of the directory.
Adding a watch is simple,
int wd = inotify_add_watch (fd, path, mask);
You can add a large number of files via something like
for each file to watch {
int wd = inotify_add_watch (fd, file, mask);
}
You can update an existing watch in the same manner, by passing in a new mask.
An existing watch is removed via the INOTIFY_IGNORE ioctl, for example
inotify_rm_watch (fd, wd);
Events are provided in the form of an inotify_event structure that is read(2)
from a inotify instance fd. The filename is of dynamic length and follows the
struct. It is of size len. The filename is padded with null bytes to ensure
proper alignment. This padding is reflected in len.
You can slurp multiple events by passing a large buffer, for example
size_t len = read (fd, buf, BUF_LEN);
Will return as many events as are available and fit in BUF_LEN.
each inotify instance fd is also select()- and poll()-able.
You can find the size of the current event queue via the FIONREAD ioctl.
All watches are destroyed and cleaned up on close.
(ii) Internal Kernel Implementation
Each open inotify instance is associated with an inotify_device structure.
Each watch is associated with an inotify_watch structure. Watches are chained
off of each associated device and each associated inode.
See fs/inotify.c for the locking and lifetime rules.
(iii) Rationale
Q: What is the design decision behind not tying the watch to the open fd of
the watched object?
A: Watches are associated with an open inotify device, not an open file.
This solves the primary problem with dnotify: keeping the file open pins
the file and thus, worse, pins the mount. Dnotify is therefore infeasible
for use on a desktop system with removable media as the media cannot be
unmounted.
Q: What is the design decision behind using an-fd-per-device as opposed to
an fd-per-watch?
A: An fd-per-watch quickly consumes more file descriptors than are allowed,
more fd's than are feasible to manage, and more fd's than are optimally
select()-able. Yes, root can bump the per-process fd limit and yes, users
can use epoll, but requiring both is a silly and extraneous requirement.
A watch consumes less memory than an open file, separating the number
spaces is thus sensible. The current design is what user-space developers
want: Users initialize inotify, once, and add n watches, requiring but one fd
and no twiddling with fd limits. Initializing an inotify instance two
thousand times is silly. If we can implement user-space's preferences
cleanly--and we can, the idr layer makes stuff like this trivial--then we
should.
There are other good arguments. With a single fd, there is a single
item to block on, which is mapped to a single queue of events. The single
fd returns all watch events and also any potential out-of-band data. If
every fd was a separate watch,
- There would be no way to get event ordering. Events on file foo and
file bar would pop poll() on both fd's, but there would be no way to tell
which happened first. A single queue trivially gives you ordering. Such
ordering is crucial to existing applications such as Beagle. Imagine
"mv a b ; mv b a" events without ordering.
- We'd have to maintain n fd's and n internal queues with state,
versus just one. It is a lot messier in the kernel. A single, linear
queue is the data structure that makes sense.
- User-space developers prefer the current API. The Beagle guys, for
example, love it. Trust me, I asked. It is not a surprise: Who'd want
to manage and block on 1000 fd's via select?
- You'd have to manage the fd's, as an example: Call close() when you
received a delete event.
- No way to get out of band data.
- 1024 is still too low. ;-)
When you talk about designing a file change notification system that
scales to 1000s of directories, juggling 1000s of fd's just does not seem
the right interface. It is too heavy.
Q: Why the system call approach?
A: The poor user-space interface is the second biggest problem with dnotify.
Signals are a terrible, terrible interface for file notification. Or for
anything, for that matter. The ideal solution, from all perspectives, is a
file descriptor-based one that allows basic file I/O and poll/select.
Obtaining the fd and managing the watches could have been done either via a
device file or a family of new system calls. We decided to implement a
family of system calls because that is the preffered approach for new kernel
features and it means our user interface requirements.
Additionally, it _is_ possible to more than one instance and
juggle more than one queue and thus more than one associated fd.

View file

@ -2,10 +2,10 @@ Kernel driver max6875
=====================
Supported chips:
* Maxim max6874, max6875
Prefixes: 'max6875'
* Maxim MAX6874, MAX6875
Prefix: 'max6875'
Addresses scanned: 0x50, 0x52
Datasheets:
Datasheet:
http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
Author: Ben Gardner <bgardner@wabtec.com>
@ -23,14 +23,26 @@ Module Parameters
Description
-----------
The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor.
The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor.
It provides timed outputs that can be used as a watchdog, if properly wired.
It also provides 512 bytes of user EEPROM.
At reset, the max6875 reads the configuration eeprom into its configuration
At reset, the MAX6875 reads the configuration EEPROM into its configuration
registers. The chip then begins to operate according to the values in the
registers.
The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
and outputs:
vin gpi vout
MAX6874 6 4 8
MAX6875 4 3 5
MAX6874 chips can have four different addresses (as opposed to only two for
the MAX6875). The additional addresses (0x54 and 0x56) are not probed by
this driver by default, but the probe module parameter can be used if
needed.
See the datasheet for details on how to program the EEPROM.

View file

@ -14,9 +14,12 @@ C example
=========
So let's say you want to access an i2c adapter from a C program. The
first thing to do is `#include <linux/i2c.h>" and "#include <linux/i2c-dev.h>.
Yes, I know, you should never include kernel header files, but until glibc
knows about i2c, there is not much choice.
first thing to do is "#include <linux/i2c-dev.h>". Please note that
there are two files named "i2c-dev.h" out there, one is distributed
with the Linux kernel and is meant to be included from kernel
driver code, the other one is distributed with lm_sensors and is
meant to be included from user-space programs. You obviously want
the second one here.
Now, you have to decide which adapter you want to access. You should
inspect /sys/class/i2c-dev/ to decide this. Adapter numbers are assigned
@ -78,7 +81,7 @@ Full interface description
==========================
The following IOCTLs are defined and fully supported
(see also i2c-dev.h and i2c.h):
(see also i2c-dev.h):
ioctl(file,I2C_SLAVE,long addr)
Change slave address. The address is passed in the 7 lower bits of the
@ -97,10 +100,10 @@ ioctl(file,I2C_PEC,long select)
ioctl(file,I2C_FUNCS,unsigned long *funcs)
Gets the adapter functionality and puts it in *funcs.
ioctl(file,I2C_RDWR,struct i2c_ioctl_rdwr_data *msgset)
ioctl(file,I2C_RDWR,struct i2c_rdwr_ioctl_data *msgset)
Do combined read/write transaction without stop in between.
The argument is a pointer to a struct i2c_ioctl_rdwr_data {
The argument is a pointer to a struct i2c_rdwr_ioctl_data {
struct i2c_msg *msgs; /* ptr to array of simple messages */
int nmsgs; /* number of messages to exchange */

View file

@ -27,7 +27,6 @@ address.
static struct i2c_driver foo_driver = {
.owner = THIS_MODULE,
.name = "Foo version 2.3 driver",
.id = I2C_DRIVERID_FOO, /* from i2c-id.h, optional */
.flags = I2C_DF_NOTIFY,
.attach_adapter = &foo_attach_adapter,
.detach_client = &foo_detach_client,
@ -37,12 +36,6 @@ static struct i2c_driver foo_driver = {
The name can be chosen freely, and may be upto 40 characters long. Please
use something descriptive here.
If used, the id should be a unique ID. The range 0xf000 to 0xffff is
reserved for local use, and you can use one of those until you start
distributing the driver, at which time you should contact the i2c authors
to get your own ID(s). Note that most of the time you don't need an ID
at all so you can just omit it.
Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
means that your driver will be notified when new adapters are found.
This is almost always what you want.

View file

@ -0,0 +1,69 @@
USERSPACE VERBS ACCESS
The ib_uverbs module, built by enabling CONFIG_INFINIBAND_USER_VERBS,
enables direct userspace access to IB hardware via "verbs," as
described in chapter 11 of the InfiniBand Architecture Specification.
To use the verbs, the libibverbs library, available from
<http://openib.org/>, is required. libibverbs contains a
device-independent API for using the ib_uverbs interface.
libibverbs also requires appropriate device-dependent kernel and
userspace driver for your InfiniBand hardware. For example, to use
a Mellanox HCA, you will need the ib_mthca kernel module and the
libmthca userspace driver be installed.
User-kernel communication
Userspace communicates with the kernel for slow path, resource
management operations via the /dev/infiniband/uverbsN character
devices. Fast path operations are typically performed by writing
directly to hardware registers mmap()ed into userspace, with no
system call or context switch into the kernel.
Commands are sent to the kernel via write()s on these device files.
The ABI is defined in drivers/infiniband/include/ib_user_verbs.h.
The structs for commands that require a response from the kernel
contain a 64-bit field used to pass a pointer to an output buffer.
Status is returned to userspace as the return value of the write()
system call.
Resource management
Since creation and destruction of all IB resources is done by
commands passed through a file descriptor, the kernel can keep track
of which resources are attached to a given userspace context. The
ib_uverbs module maintains idr tables that are used to translate
between kernel pointers and opaque userspace handles, so that kernel
pointers are never exposed to userspace and userspace cannot trick
the kernel into following a bogus pointer.
This also allows the kernel to clean up when a process exits and
prevent one process from touching another process's resources.
Memory pinning
Direct userspace I/O requires that memory regions that are potential
I/O targets be kept resident at the same physical address. The
ib_uverbs module manages pinning and unpinning memory regions via
get_user_pages() and put_page() calls. It also accounts for the
amount of memory pinned in the process's locked_vm, and checks that
unprivileged processes do not exceed their RLIMIT_MEMLOCK limit.
Pages that are pinned multiple times are counted each time they are
pinned, so the value of locked_vm may be an overestimate of the
number of pages pinned by a process.
/dev files
To create the appropriate character device files automatically with
udev, a rule like
KERNEL="uverbs*", NAME="infiniband/%k"
can be used. This will create device nodes named
/dev/infiniband/uverbs0
and so on. Since the InfiniBand userspace verbs should be safe for
use by non-privileged processes, it may be useful to add an
appropriate MODE or GROUP to the udev rule.

View file

@ -37,7 +37,7 @@ restrictions referred to are that the relevant option is valid if:
IA-32 IA-32 aka i386 architecture is enabled.
IA-64 IA-64 architecture is enabled.
IOSCHED More than one I/O scheduler is enabled.
IP_PNP IP DCHP, BOOTP, or RARP is enabled.
IP_PNP IP DHCP, BOOTP, or RARP is enabled.
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
@ -758,6 +758,9 @@ running once the system is up.
maxcpus= [SMP] Maximum number of processors that an SMP kernel
should make use of
max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
equal to this physical address is ignored.
max_luns= [SCSI] Maximum number of LUNs to probe
Should be between 1 and 2^32-1.

View file

@ -0,0 +1,145 @@
LC-trie implementation notes.
Node types
----------
leaf
An end node with data. This has a copy of the relevant key, along
with 'hlist' with routing table entries sorted by prefix length.
See struct leaf and struct leaf_info.
trie node or tnode
An internal node, holding an array of child (leaf or tnode) pointers,
indexed through a subset of the key. See Level Compression.
A few concepts explained
------------------------
Bits (tnode)
The number of bits in the key segment used for indexing into the
child array - the "child index". See Level Compression.
Pos (tnode)
The position (in the key) of the key segment used for indexing into
the child array. See Path Compression.
Path Compression / skipped bits
Any given tnode is linked to from the child array of its parent, using
a segment of the key specified by the parent's "pos" and "bits"
In certain cases, this tnode's own "pos" will not be immediately
adjacent to the parent (pos+bits), but there will be some bits
in the key skipped over because they represent a single path with no
deviations. These "skipped bits" constitute Path Compression.
Note that the search algorithm will simply skip over these bits when
searching, making it necessary to save the keys in the leaves to
verify that they actually do match the key we are searching for.
Level Compression / child arrays
the trie is kept level balanced moving, under certain conditions, the
children of a full child (see "full_children") up one level, so that
instead of a pure binary tree, each internal node ("tnode") may
contain an arbitrarily large array of links to several children.
Conversely, a tnode with a mostly empty child array (see empty_children)
may be "halved", having some of its children moved downwards one level,
in order to avoid ever-increasing child arrays.
empty_children
the number of positions in the child array of a given tnode that are
NULL.
full_children
the number of children of a given tnode that aren't path compressed.
(in other words, they aren't NULL or leaves and their "pos" is equal
to this tnode's "pos"+"bits").
(The word "full" here is used more in the sense of "complete" than
as the opposite of "empty", which might be a tad confusing.)
Comments
---------
We have tried to keep the structure of the code as close to fib_hash as
possible to allow verification and help up reviewing.
fib_find_node()
A good start for understanding this code. This function implements a
straightforward trie lookup.
fib_insert_node()
Inserts a new leaf node in the trie. This is bit more complicated than
fib_find_node(). Inserting a new node means we might have to run the
level compression algorithm on part of the trie.
trie_leaf_remove()
Looks up a key, deletes it and runs the level compression algorithm.
trie_rebalance()
The key function for the dynamic trie after any change in the trie
it is run to optimize and reorganize. Tt will walk the trie upwards
towards the root from a given tnode, doing a resize() at each step
to implement level compression.
resize()
Analyzes a tnode and optimizes the child array size by either inflating
or shrinking it repeatedly until it fullfills the criteria for optimal
level compression. This part follows the original paper pretty closely
and there may be some room for experimentation here.
inflate()
Doubles the size of the child array within a tnode. Used by resize().
halve()
Halves the size of the child array within a tnode - the inverse of
inflate(). Used by resize();
fn_trie_insert(), fn_trie_delete(), fn_trie_select_default()
The route manipulation functions. Should conform pretty closely to the
corresponding functions in fib_hash.
fn_trie_flush()
This walks the full trie (using nextleaf()) and searches for empty
leaves which have to be removed.
fn_trie_dump()
Dumps the routing table ordered by prefix length. This is somewhat
slower than the corresponding fib_hash function, as we have to walk the
entire trie for each prefix length. In comparison, fib_hash is organized
as one "zone"/hash per prefix length.
Locking
-------
fib_lock is used for an RW-lock in the same way that this is done in fib_hash.
However, the functions are somewhat separated for other possible locking
scenarios. It might conceivably be possible to run trie_rebalance via RCU
to avoid read_lock in the fn_trie_lookup() function.
Main lookup mechanism
---------------------
fn_trie_lookup() is the main lookup function.
The lookup is in its simplest form just like fib_find_node(). We descend the
trie, key segment by key segment, until we find a leaf. check_leaf() does
the fib_semantic_match in the leaf's sorted prefix hlist.
If we find a match, we are done.
If we don't find a match, we enter prefix matching mode. The prefix length,
starting out at the same as the key length, is reduced one step at a time,
and we backtrack upwards through the trie trying to find a longest matching
prefix. The goal is always to reach a leaf and get a positive result from the
fib_semantic_match mechanism.
Inside each tnode, the search for longest matching prefix consists of searching
through the child array, chopping off (zeroing) the least significant "1" of
the child index until we find a match or the child index consists of nothing but
zeros.
At this point we backtrack (t->stats.backtrack++) up the trie, continuing to
chop off part of the key in order to find the longest matching prefix.
At this point we will repeatedly descend subtries to look for a match, and there
are some optimizations available that can provide us with "shortcuts" to avoid
descending into dead ends. Look for "HL_OPTIMIZE" sections in the code.
To alleviate any doubts about the correctness of the route selection process,
a new netlink operation has been added. Look for NETLINK_FIB_LOOKUP, which
gives userland access to fib_lookup().

View file

@ -19,9 +19,8 @@ PCMCIA_DEVICE_PROD_ID1("some_string", 0x(hash_of_some_string)),
If the hash is incorrect, the kernel will inform you about this in "dmesg"
upon module initialization, and tell you of the correct hash.
You can determine the hash of the product ID strings by running
"pcmcia-modalias %n.%m" [%n being replaced with the socket number and %m being
replaced with the device function] from pcmciautils. It generates a string
You can determine the hash of the product ID strings by catting the file
"modalias" in the sysfs directory of the PCMCIA device. It generates a string
in the following form:
pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000

View file

@ -1,6 +1,13 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
* in-kernel device<->driver matching
* event handler initialization in struct pcmcia_driver (as of 2.6.13)
The event handler is notified of all events, and must be initialized
as the event() callback in the driver's struct pcmcia_driver.
* pcmcia/version.h should not be used (as of 2.6.13)
This file will be removed eventually.
* in-kernel device<->driver matching (as of 2.6.13)
PCMCIA devices and their correct drivers can now be matched in
kernelspace. See 'devicetable.txt' for details.

View file

@ -117,6 +117,7 @@ IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4)
Medion MD4220 ??? (*)
Samsung P35 vbetool needed (6)
Sharp PC-AR10 (ATI rage) none (1)
Sony Vaio PCG-C1VRX/K s3_bios (2)
Sony Vaio PCG-F403 ??? (*)
Sony Vaio PCG-N505SN ??? (*)
Sony Vaio vgn-s260 X or boot-radeon can init it (5)

View file

@ -297,6 +297,7 @@ Vendor ID Product ID
0x0c45 0x602a
0x0c45 0x602b
0x0c45 0x602c
0x0c45 0x602d
0x0c45 0x6030
0x0c45 0x6080
0x0c45 0x6082
@ -333,6 +334,7 @@ Model Manufacturer
----- ------------
HV7131D Hynix Semiconductor, Inc.
MI-0343 Micron Technology, Inc.
OV7630 OmniVision Technologies, Inc.
PAS106B PixArt Imaging, Inc.
PAS202BCB PixArt Imaging, Inc.
TAS5110C1B Taiwan Advanced Sensor Corporation
@ -470,9 +472,11 @@ order):
- Luca Capello for the donation of a webcam;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
donation of a webcam;
- Jon Hollstrom for the donation of a webcam;
- Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
image sensor;
- Stefano Mozzi, who donated 45 EU;
- Andrew Pearce for the donation of a webcam;
- Bertrik Sikken, who reverse-engineered and documented the Huffman compression
algorithm used in the SN9C10x controllers and implemented the first decoder;
- Mizuno Takafumi for the donation of a webcam;

View file

@ -101,6 +101,13 @@ Here is the list of words, from left to right:
or 3 and 2 positions, correspondingly.
- URB Status. This field makes no sense for submissions, but is present
to help scripts with parsing. In error case, it contains the error code.
In case of a setup packet, it contains a Setup Tag. If scripts read a number
in this field, the proceed to read Data Length. Otherwise, they read
the setup packet before reading the Data Length.
- Setup packet, if present, consists of 5 words: one of each for bmRequestType,
bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0.
These words are safe to decode if Setup Tag was 's'. Otherwise, the setup
packet was present, but not captured, and the fields contain filler.
- Data Length. This is the actual length in the URB.
- Data tag. The usbmon may not always capture data, even if length is nonzero.
Only if tag is '=', the data words are present.
@ -125,25 +132,31 @@ class ParsedLine {
String data_str = st.nextToken();
int len = data_str.length() / 2;
int i;
int b; // byte is signed, apparently?! XXX
for (i = 0; i < len; i++) {
data[data_len] = Byte.parseByte(
data_str.substring(i*2, i*2 + 2),
16);
// data[data_len] = Byte.parseByte(
// data_str.substring(i*2, i*2 + 2),
// 16);
b = Integer.parseInt(
data_str.substring(i*2, i*2 + 2),
16);
if (b >= 128)
b *= -1;
data[data_len] = (byte) b;
data_len++;
}
}
}
}
This format is obviously deficient. For example, the setup packet for control
transfers is not delivered. This will change in the future.
This format may be changed in the future.
Examples:
An input control transfer to get a port status:
An input control transfer to get a port status.
d74ff9a0 2640288196 S Ci:001:00 -115 4 <
d74ff9a0 2640288202 C Ci:001:00 0 4 = 01010100
d5ea89a0 3575914555 S Ci:001:00 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:001:00 0 4 = 01050000
An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
to a storage device at address 5:

View file

@ -1,4 +1,4 @@
card=0 - *** UNKNOWN/GENERIC ***
card=0 - *** UNKNOWN/GENERIC ***
card=1 - MIRO PCTV
card=2 - Hauppauge (bt848)
card=3 - STB, Gateway P/N 6000699 (bt848)

View file

@ -27,3 +27,5 @@ card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
card=26 - IODATA GV/BCTV7E
card=27 - PixelView PlayTV Ultra Pro (Stereo)
card=28 - DViCO FusionHDTV 3 Gold-T
card=29 - ADS Tech Instant TV DVB-T PCI
card=30 - TerraTec Cinergy 1400 DVB-T

View file

@ -1,10 +1,10 @@
0 -> UNKNOWN/GENERIC
0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
3 -> LifeView FlyVIDEO2000 [5168:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
6 -> Tevion MD 9717
7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01]
8 -> Terratec Cinergy 400 TV [153B:1142]
9 -> Medion 5044
@ -34,6 +34,7 @@
33 -> AVerMedia DVD EZMaker [1461:10ff]
34 -> Noval Prime TV 7133
35 -> AverMedia AverTV Studio 305 [1461:2115]
36 -> UPMOST PURPLE TV [12ab:0800]
37 -> Items MuchTV Plus / IT-005
38 -> Terratec Cinergy 200 TV [153B:1152]
39 -> LifeView FlyTV Platinum Mini [5168:0212]
@ -43,20 +44,21 @@
43 -> :Zolid Xpert TV7134
44 -> Empire PCI TV-Radio LE
45 -> Avermedia AVerTV Studio 307 [1461:9715]
46 -> AVerMedia Cardbus TV/Radio [1461:d6ee]
46 -> AVerMedia Cardbus TV/Radio (E500) [1461:d6ee]
47 -> Terratec Cinergy 400 mobile [153b:1162]
48 -> Terratec Cinergy 600 TV MK3 [153B:1158]
49 -> Compro VideoMate Gold+ Pal [185b:c200]
50 -> Pinnacle PCTV 300i DVB-T + PAL [11bd:002d]
51 -> ProVideo PV952 [1540:9524]
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
55 -> LifeView FlyDVB-T DUO [5168:0306]
55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
60 -> Typhoon DVB-T Duo Digital/Analog Cardbus
61 -> Philips TOUGH DVB-T reference design
60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134

View file

@ -56,9 +56,9 @@ tuner=54 - tda8290+75
tuner=55 - LG PAL (TAPE series)
tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
tuner=57 - Philips FQ1236A MK4
tuner=58 - Ymec TVision TVF-8531MF
tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF
tuner=59 - Ymec TVision TVF-5533MF
tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
tuner=61 - Tena TNF9533-D/IF
tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner

View file

@ -20,7 +20,7 @@ All other cards only differ by additional components as tuners, sound
decoders, EEPROMs, teletext decoders ...
Unsupported Cards:
Unsupported Cards:
------------------
Cards with Zoran (ZR) or Philips (SAA) or ISA are not supported by
@ -50,11 +50,11 @@ Bt848a/Bt849 single crytal operation support possible!!!
Miro/Pinnacle PCTV
------------------
- Bt848
some (all??) come with 2 crystals for PAL/SECAM and NTSC
- Bt848
some (all??) come with 2 crystals for PAL/SECAM and NTSC
- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
- MSP34xx sound decoder on add on board
decoder is supported but AFAIK does not yet work
decoder is supported but AFAIK does not yet work
(other sound MUX setting in GPIO port needed??? somebody who fixed this???)
- 1 tuner, 1 composite and 1 S-VHS input
- tuner type is autodetected
@ -70,7 +70,7 @@ in 1997!
Hauppauge Win/TV pci
--------------------
There are many different versions of the Hauppauge cards with different
There are many different versions of the Hauppauge cards with different
tuners (TV+Radio ...), teletext decoders.
Note that even cards with same model numbers have (depending on the revision)
different chips on it.
@ -80,22 +80,22 @@ different chips on it.
- PAL, SECAM, NTSC or tuner with or without Radio support
e.g.:
PAL:
PAL:
TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
NTSC:
TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
TSA5518: no datasheet available on Philips site
- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
SAA5246 (I2C 0x22) is supported
- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
with configuration information
I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
- 14052B: mux for selection of sound source
- sound decoder: TDA9800, MSP34xx (stereo cards)
- sound decoder: TDA9800, MSP34xx (stereo cards)
Askey CPH-Series
@ -108,17 +108,17 @@ Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
CPH05x: BT878 with FM
CPH06x: BT878 (w/o FM)
CPH07x: BT878 capture only
TV standards:
CPH0x0: NTSC-M/M
CPH0x1: PAL-B/G
CPH0x2: PAL-I/I
CPH0x3: PAL-D/K
CPH0x4: SECAM-L/L
CPH0x5: SECAM-B/G
CPH0x6: SECAM-D/K
CPH0x7: PAL-N/N
CPH0x8: PAL-B/H
CPH0x4: SECAM-L/L
CPH0x5: SECAM-B/G
CPH0x6: SECAM-D/K
CPH0x7: PAL-N/N
CPH0x8: PAL-B/H
CPH0x9: PAL-M/M
CPH03x was often sold as "TV capturer".
@ -174,7 +174,7 @@ Lifeview Flyvideo Series:
"The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
Their Bt8x8 cards are listed as discontinued.
Flyvideo 2000S was probably sold as Flyvideo 3000 in some contries(Europe?).
The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
this name is re-used for LR50 Rev.W.
@ -235,12 +235,12 @@ Prolink
Multimedia TV packages (card + software pack):
PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software
PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E)
PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A )
PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A )
PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w
@ -254,7 +254,7 @@ Prolink
DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
DTV2000 DVB-S = Twinhan VP-1020
Video Conferencing:
PixelView Meeting PAK - (Model: PV-BT878P)
PixelView Meeting PAK Lite - (Model: PV-BT878P)
@ -308,7 +308,7 @@ KNC One
newer Cards have saa7134, but model name stayed the same?
Provideo
Provideo
--------
PV951 or PV-951 (also are sold as:
Boeder TV-FM Video Capture Card
@ -353,7 +353,7 @@ AVerMedia
AVerTV
AVerTV Stereo
AVerTV Studio (w/FM)
AVerMedia TV98 with Remote
AVerMedia TV98 with Remote
AVerMedia TV/FM98 Stereo
AVerMedia TVCAM98
TVCapture (Bt848)
@ -373,7 +373,7 @@ AVerMedia
(1) Daughterboard MB68-A with TDA9820T and TDA9840T
(2) Sony NE41S soldered (stereo sound?)
(3) Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
US site has different drivers for (as of 09/2002):
EZ Capture/InterCam PCI (BT-848 chip)
EZ Capture/InterCam PCI (BT-878 chip)
@ -437,7 +437,7 @@ Terratec
Terra TValueRadio, "LR102 Rev.C" printed on the PCB
Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB,
"CPH010-E83" on the back, SAA6588T, TDA9873H
Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
"CPH011-D83" on back
Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
Terra TValue New Revision "LR102 Rec.C"
@ -528,7 +528,7 @@ Koutech
KW-606RSF
KW-607A (capture only)
KW-608 (Zoran capture only)
IODATA (jp)
------
GV-BCTV/PCI
@ -542,15 +542,15 @@ Canopus (jp)
-------
WinDVR = Kworld "KW-TVL878RF"
www.sigmacom.co.kr
www.sigmacom.co.kr
------------------
Sigma Cyber TV II
Sigma Cyber TV II
www.sasem.co.kr
---------------
Litte OnAir TV
hama
hama
----
TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
@ -638,7 +638,7 @@ Media-Surfer (esc-kathrein.de)
Jetway (www.jetway.com.tw)
--------------------------
JW-TV 878M
JW-TV 878M
JW-TV 878 = KWorld KW-TV878RF
Galaxis
@ -715,7 +715,7 @@ Hauppauge
809 MyVideo
872 MyTV2Go FM
546 WinTV Nova-S CI
543 WinTV Nova
907 Nova-S USB
@ -739,7 +739,7 @@ Hauppauge
832 MyTV2Go
869 MyTV2Go-FM
805 MyVideo (USB)
Matrix-Vision
-------------
@ -764,7 +764,7 @@ Gallant (www.gallantcom.com) www.minton.com.tw
Intervision IV-550 (bt8x8)
Intervision IV-100 (zoran)
Intervision IV-1000 (bt8x8)
Asonic (www.asonic.com.cn) (website down)
-----------------------------------------
SkyEye tv 878
@ -804,11 +804,11 @@ Kworld (www.kworld.com.tw)
JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
---------------------------------------------------------------------
JTT-02 (JTT TV) "TV watchmate pro" (bt848)
JTT-02 (JTT TV) "TV watchmate pro" (bt848)
ADS www.adstech.com
-------------------
Channel Surfer TV ( CHX-950 )
Channel Surfer TV ( CHX-950 )
Channel Surfer TV+FM ( CHX-960FM )
AVEC www.prochips.com
@ -874,7 +874,7 @@ www.ids-imaging.de
------------------
Falcon Series (capture only)
In USA: http://www.theimagingsource.com/
DFG/LC1
DFG/LC1
www.sknet-web.co.jp
-------------------
@ -890,7 +890,7 @@ Cybertainment
CyberMail Xtreme
These are Flyvideo
VCR (http://www.vcrinc.com/)
VCR (http://www.vcrinc.com/)
---
Video Catcher 16
@ -920,7 +920,7 @@ Sdisilk www.sdisilk.com/
SDI Silk 200 SDI Input Card
www.euresys.com
PICOLO series
PICOLO series
PMC/Pace
www.pacecom.co.uk website closed

View file

@ -34,4 +34,8 @@ MO_OUTPUT_FORMAT (0x310164)
2: HACTEXT
1: HSFMT
0x47 is the sync byte for MPEG-2 transport stream packets.
Datasheet incorrectly states to use 47 decimal. 188 is the length.
All DVB compliant frontends output packets with this start code.
=================================================================================

View file

@ -370,6 +370,10 @@ W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
AUDIT SUBSYSTEM
L: linux-audit@redhat.com (subscribers-only)
S: Maintained
AX.25 NETWORK LAYER
P: Ralf Baechle
M: ralf@linux-mips.org
@ -1236,7 +1240,7 @@ S: Maintained
IRDA SUBSYSTEM
P: Jean Tourrilhes
L: irda-users@lists.sourceforge.net
L: irda-users@lists.sourceforge.net (subscribers-only)
W: http://irda.sourceforge.net/
S: Maintained
@ -1803,8 +1807,9 @@ M: greg@kroah.com
S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
S: Unmaintained
S: Maintained
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
@ -2161,7 +2166,7 @@ UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
P: Eddie C. Dost
M: ecd@skynet.be
M: ecd@brainaid.de
P: Jakub Jelinek
M: jj@sunsite.ms.mff.cuni.cz
P: Anton Blanchard

View file

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 13
EXTRAVERSION =-rc1
EXTRAVERSION =-rc3
NAME=Woozy Numbat
# *DOCUMENTATION*
@ -792,6 +792,9 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.ko: scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
%/: scripts prepare FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
%.lst: %.c scripts FORCE
@ -1033,6 +1036,7 @@ help:
@echo ' modules_install - Install all modules'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@ -1149,7 +1153,7 @@ endif # KBUILD_EXTMOD
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
ifeq ($(KBUILD_OUTPUT),)
ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/

View file

@ -596,6 +596,8 @@ source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"

View file

@ -55,6 +55,8 @@ do_entInt(unsigned long type, unsigned long vector,
#ifdef CONFIG_SMP
{
long cpu;
local_irq_disable();
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {

View file

@ -240,7 +240,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
siginfo_t info;
int signo, code;
if (regs->ps == 0) {
if ((regs->ps & ~IPL_MAX) == 0) {
if (type == 1) {
const unsigned int *data
= (const unsigned int *) regs->pc;

View file

@ -223,7 +223,9 @@ source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/mach-omap/Kconfig"
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
@ -514,7 +516,7 @@ config XIP_PHYS_ADDR
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR)
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
menu "CPU Frequency scaling"
@ -698,6 +700,8 @@ config APM
endmenu
source "net/Kconfig"
menu "Device Drivers"
source "drivers/base/Kconfig"
@ -730,7 +734,7 @@ source "drivers/ieee1394/Kconfig"
source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
source "drivers/net/Kconfig"
source "drivers/isdn/Kconfig"
@ -742,6 +746,8 @@ source "drivers/char/Kconfig"
source "drivers/i2c/Kconfig"
source "drivers/hwmon/Kconfig"
#source "drivers/l3/Kconfig"
source "drivers/misc/Kconfig"

View file

@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
tune-$(CONFIG_CPU_V6) :=-mtune=strongarm
# Need -Uarm for gcc < 3.x
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
@ -91,7 +91,8 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_OMAP1) := omap1
incdir-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
@ -142,6 +143,9 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
# If we have a common platform directory, then include it in the build.
core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-git6
# Sat Jun 25 00:57:29 2005
# Linux kernel version: 2.6.13-rc2
# Thu Jul 7 16:41:21 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -137,6 +137,7 @@ CONFIG_PCI_NAMES=y
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -345,10 +346,9 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -363,17 +363,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# TCP congestion control
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -931,4 +922,3 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_TEXTSEARCH is not set

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-git6
# Sat Jun 25 00:58:38 2005
# Linux kernel version: 2.6.13-rc2
# Thu Jul 7 16:49:01 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# TCP congestion control
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -932,4 +923,3 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_TEXTSEARCH is not set

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-git6
# Sat Jun 25 00:59:35 2005
# Linux kernel version: 2.6.13-rc2
# Thu Jul 7 16:49:08 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# TCP congestion control
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -933,4 +924,3 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_TEXTSEARCH is not set

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-git6
# Sat Jun 25 01:00:27 2005
# Linux kernel version: 2.6.13-rc2
# Thu Jul 7 16:49:20 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# TCP congestion control
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -932,4 +923,3 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_TEXTSEARCH is not set

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-git6
# Sat Jun 25 01:01:18 2005
# Linux kernel version: 2.6.13-rc2
# Thu Jul 7 16:49:13 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
#
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# TCP congestion control
#
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -933,4 +924,3 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_TEXTSEARCH is not set

View file

@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 17:52:41 2005
# Linux kernel version: 2.6.13-rc2
# Fri Jul 8 04:49:34 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@ -33,8 +33,9 @@ CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@ -82,10 +83,28 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
#
CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
# CONFIG_ARCH_OMAP2 is not set
#
# OMAP Feature Selections
#
# CONFIG_OMAP_RESET_CLOCKS is not set
CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
#
# OMAP Core Type
@ -93,7 +112,6 @@ CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP1510 is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_ARCH_OMAP_OTG=y
#
# OMAP Board Type
@ -101,21 +119,14 @@ CONFIG_ARCH_OMAP_OTG=y
# CONFIG_MACH_OMAP_INNOVATOR is not set
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
# CONFIG_MACH_OMAP_H4 is not set
# CONFIG_MACH_OMAP_OSK is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
# OMAP Feature Selections
# OMAP CPU Speed
#
CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MPU_TIMER=y
# CONFIG_OMAP_32K_TIMER is not set
CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_168MHZ is not set
# CONFIG_OMAP_ARM_120MHZ is not set
@ -145,6 +156,7 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@ -154,7 +166,16 @@ CONFIG_ARM_THUMB=y
#
# Kernel Features
#
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_NO_IDLE_HZ=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@ -166,6 +187,22 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
# CONFIG_XIP_KERNEL is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# Floating point emulation
#
@ -202,7 +239,6 @@ CONFIG_PM=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
@ -292,7 +328,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@ -327,6 +362,7 @@ CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@ -356,6 +392,7 @@ CONFIG_SCSI_PROC_FS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@ -375,12 +412,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@ -395,6 +432,8 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@ -442,6 +481,7 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@ -518,7 +558,6 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@ -567,13 +606,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
@ -604,7 +641,9 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
@ -620,6 +659,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@ -627,15 +667,21 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
CONFIG_ISP1301_OMAP=y
CONFIG_TPS65010=y
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -663,8 +709,10 @@ CONFIG_FB=y
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SOFT_CURSOR is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@ -677,11 +725,13 @@ CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@ -729,14 +779,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_OMAP=y
CONFIG_USB_OMAP=y
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
@ -755,6 +805,7 @@ CONFIG_USB_ETH_RNDIS=y
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
@ -791,7 +842,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
@ -828,12 +878,14 @@ CONFIG_CRAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@ -903,24 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_USER is not set
#
# Security options

View file

@ -1,803 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 21:31:45 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
#
# SA11x0 Implementations
#
# CONFIG_SA1100_ASSABET is not set
# CONFIG_SA1100_CERF is not set
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
# CONFIG_SA1100_LART is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_SSP is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_SA1100=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
CONFIG_CPU_MINICACHE=y
#
# Processor Features
#
#
# Bus support
#
CONFIG_ISA=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
#
# PC-card bridges
#
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
CONFIG_PCCARD_NONSTATIC=y
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M"
# CONFIG_XIP_KERNEL is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
CONFIG_PCMCIA_WAVELAN=y
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

View file

@ -41,7 +41,10 @@ extern void fp_enter(void);
* This has a special calling convention; it doesn't
* modify any of the usual registers, except for LR.
*/
#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "")
#define EXPORT_SYMBOL_ALIAS(sym,orig) \
EXPORT_CRC_ALIAS(sym) \
const struct kernel_symbol __ksymtab_##sym \
__attribute__((section("__ksymtab"))) = \
{ (unsigned long)&orig, #sym };

View file

@ -344,9 +344,9 @@ __create_page_tables:
str r6, [r0]
#endif
#ifdef CONFIG_DEBUG_LL
bic r7, r7, #0x0c @ turn off cacheable
@ and bufferable bits
#ifdef CONFIG_DEBUG_LL
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
@ -372,27 +372,23 @@ __create_page_tables:
teq r1, #MACH_TYPE_NETWINDER
teqne r1, #MACH_TYPE_CATS
bne 1f
add r0, r4, #0x3fc0 @ ff000000
mov r3, #0x7c000000
orr r3, r3, r7
str r3, [r0], #4
add r3, r3, #1 << 20
str r3, [r0], #4
add r0, r4, #0xff000000 >> 18
orr r3, r7, #0x7c000000
str r3, [r0]
1:
#endif
#endif
#ifdef CONFIG_ARCH_RPC
/*
* Map in screen at 0x02000000 & SCREEN2_BASE
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
add r0, r4, #0x80 @ 02000000
mov r3, #0x02000000
orr r3, r3, r7
add r0, r4, #0x02000000 >> 18
orr r3, r7, #0x02000000
str r3, [r0]
add r0, r4, #0x3600 @ d8000000
add r0, r4, #0xd8000000 >> 18
str r3, [r0]
#endif
#endif
mov pc, lr
.ltorg

View file

@ -737,8 +737,8 @@ void __init setup_arch(char **cmdline_p)
if (mdesc->soft_reboot)
reboot_setup("s");
if (mdesc->param_offset)
tags = phys_to_virt(mdesc->param_offset);
if (mdesc->boot_params)
tags = phys_to_virt(mdesc->boot_params);
/*
* If we have the old style parameters, convert them to

View file

@ -230,16 +230,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
do_exit(SIGSEGV);
}
void die_if_kernel(const char *str, struct pt_regs *regs, int err)
{
if (user_mode(regs))
return;
die(str, regs, err);
}
static void notify_die(const char *str, struct pt_regs *regs, siginfo_t *info,
unsigned long err, unsigned long trap)
void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
unsigned long err, unsigned long trap)
{
if (user_mode(regs)) {
current->thread.error_code = err;

View file

@ -40,9 +40,11 @@ static void __init aaed2000_map_io(void)
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
MAINTAINER("Nicolas Bellido Y Ortega")
BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE)
MAPIO(aaed2000_map_io)
INITIRQ(aaed2000_init_irq)
/* Maintainer: Nicolas Bellido Y Ortega */
.phys_ram = 0xf0000000,
.phys_io = PIO_BASE,
.io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc,
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
MACHINE_END

View file

@ -59,11 +59,13 @@ void __init autcpu12_map_io(void)
}
MACHINE_START(AUTCPU12, "autronix autcpu12")
MAINTAINER("Thomas Gleixner")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0020000)
MAPIO(autcpu12_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: Thomas Gleixner */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0020000,
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -49,10 +49,12 @@ static void __init cdb89712_map_io(void)
}
MACHINE_START(CDB89712, "Cirrus-CDB89712")
MAINTAINER("Ray Lehtiniemi")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0000100)
MAPIO(cdb89712_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: Ray Lehtiniemi */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -53,10 +53,12 @@ static void __init ceiva_map_io(void)
MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
MAINTAINER("Rob Scott")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0000100)
MAPIO(ceiva_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: Rob Scott */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -37,12 +37,14 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
MAINTAINER("Nobody")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_clep7312)
MAPIO(clps711x_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: Nobody */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -51,11 +51,13 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
}
MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
MAINTAINER("Jon McClintock")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0020100) /* 0xc0000000 - 0xc001ffff can be video RAM */
FIXUP(fixup_edb7211)
MAPIO(edb7211_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: Jon McClintock */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -75,11 +75,13 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags,
}
MACHINE_START(FORTUNET, "ARM-FortuNet")
MAINTAINER("FortuNet Inc.")
BOOT_MEM(0xc0000000, 0x80000000, 0xf0000000)
BOOT_PARAMS(0x00000000)
FIXUP(fortunet_fixup)
MAPIO(clps711x_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: FortuNet Inc. */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xf0000000) >> 18) & 0xfffc,
.boot_params = 0x00000000,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -79,12 +79,14 @@ static void __init p720t_map_io(void)
}
MACHINE_START(P720T, "ARM-Prospector720T")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_p720t)
MAPIO(p720t_map_io)
INITIRQ(clps711x_init_irq)
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.fixup = fixup_p720t,
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END

View file

@ -366,11 +366,13 @@ static void __init clps7500_init(void)
}
MACHINE_START(CLPS7500, "CL-PS7500")
MAINTAINER("Philip Blundell")
BOOT_MEM(0x10000000, 0x03000000, 0xe0000000)
MAPIO(clps7500_map_io)
INITIRQ(clps7500_init_irq)
.init_machine = clps7500_init,
.timer = &clps7500_timer,
/* Maintainer: Philip Blundell */
.phys_ram = 0x10000000,
.phys_io = 0x03000000,
.io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
.map_io = clps7500_map_io,
.init_irq = clps7500_init_irq,
.init_machine = clps7500_init,
.timer = &clps7500_timer,
MACHINE_END

View file

@ -233,13 +233,15 @@ static int __init ebsa110_init(void)
arch_initcall(ebsa110_init);
MACHINE_START(EBSA110, "EBSA110")
MAINTAINER("Russell King")
BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000)
BOOT_PARAMS(0x00000400)
DISABLE_PARPORT(0)
DISABLE_PARPORT(2)
SOFT_REBOOT
MAPIO(ebsa110_map_io)
INITIRQ(ebsa110_init_irq)
/* Maintainer: Russell King */
.phys_ram = 0x00000000,
.phys_io = 0xe0000000,
.io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
.boot_params = 0x00000400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.soft_reboot = 1,
.map_io = ebsa110_map_io,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
MACHINE_END

View file

@ -63,10 +63,12 @@ extern void epxa10db_init_irq(void);
extern struct sys_timer epxa10db_timer;
MACHINE_START(CAMELOT, "Altera Epxa10db")
MAINTAINER("Altera Corporation")
BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
MAPIO(epxa10db_map_io)
INITIRQ(epxa10db_init_irq)
/* Maintainer: Altera Corporation */
.phys_ram = 0x00000000,
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.map_io = epxa10db_map_io,
.init_irq = epxa10db_init_irq,
.timer = &epxa10db_timer,
MACHINE_END

View file

@ -84,12 +84,14 @@ fixup_cats(struct machine_desc *desc, struct tag *tags,
}
MACHINE_START(CATS, "Chalice-CATS")
MAINTAINER("Philip Blundell")
BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
BOOT_PARAMS(0x00000100)
SOFT_REBOOT
FIXUP(fixup_cats)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
/* Maintainer: Philip Blundell */
.phys_ram = 0x00000000,
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0xfe000000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
MACHINE_END

View file

@ -28,11 +28,13 @@ fixup_coebsa285(struct machine_desc *desc, struct tag *tags,
}
MACHINE_START(CO285, "co-EBSA285")
MAINTAINER("Mark van Doesburg")
BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0x7cf00000)
FIXUP(fixup_coebsa285)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
/* Maintainer: Mark van Doesburg */
.phys_ram = 0x00000000,
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc,
.fixup = fixup_coebsa285,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
MACHINE_END

View file

@ -13,12 +13,15 @@
#include "common.h"
MACHINE_START(EBSA285, "EBSA285")
MAINTAINER("Russell King")
BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
BOOT_PARAMS(0x00000100)
VIDEO(0x000a0000, 0x000bffff)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
/* Maintainer: Russell King */
.phys_ram = 0x00000000,
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0xfe000000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
MACHINE_END

View file

@ -647,14 +647,17 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
}
MACHINE_START(NETWINDER, "Rebel-NetWinder")
MAINTAINER("Russell King/Rebel.com")
BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
BOOT_PARAMS(0x00000100)
VIDEO(0x000a0000, 0x000bffff)
DISABLE_PARPORT(0)
DISABLE_PARPORT(2)
FIXUP(fixup_netwinder)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
/* Maintainer: Russell King/Rebel.com */
.phys_ram = 0x00000000,
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0xfe000000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.fixup = fixup_netwinder,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
MACHINE_END

View file

@ -13,11 +13,13 @@
#include "common.h"
MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
MAINTAINER("Jamey Hicks / George France")
BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000)
BOOT_PARAMS(0x00000100)
MAPIO(footbridge_map_io)
INITIRQ(footbridge_init_irq)
/* Maintainer: Jamey Hicks / George France */
.phys_ram = 0x00000000,
.phys_io = DC21285_ARMCSR_BASE,
.io_pg_offst = ((0xfe000000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
MACHINE_END

View file

@ -30,10 +30,12 @@
#include "common.h"
MACHINE_START(H7201, "Hynix GMS30C7201")
MAINTAINER("Robert Schwebel, Pengutronix")
BOOT_MEM(0x40000000, 0x80000000, 0xf0000000)
BOOT_PARAMS(0xc0001000)
MAPIO(h720x_map_io)
INITIRQ(h720x_init_irq)
.timer = &h7201_timer,
/* Maintainer: Robert Schwebel, Pengutronix */
.phys_ram = 0x40000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xf0000000) >> 18) & 0xfffc,
.boot_params = 0xc0001000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
MACHINE_END

View file

@ -71,11 +71,13 @@ static void __init init_eval_h7202(void)
}
MACHINE_START(H7202, "Hynix HMS30C7202")
MAINTAINER("Robert Schwebel, Pengutronix")
BOOT_MEM(0x40000000, 0x80000000, 0xf0000000)
BOOT_PARAMS(0x40000100)
MAPIO(h720x_map_io)
INITIRQ(h7202_init_irq)
.timer = &h7202_timer,
INIT_MACHINE(init_eval_h7202)
/* Maintainer: Robert Schwebel, Pengutronix */
.phys_ram = 0x40000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xf0000000) >> 18) & 0xfffc,
.boot_params = 0x40000100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
.init_machine = init_eval_h7202,
MACHINE_END

View file

@ -78,11 +78,13 @@ mx1ads_map_io(void)
}
MACHINE_START(MX1ADS, "Motorola MX1ADS")
MAINTAINER("Sascha Hauer, Pengutronix")
BOOT_MEM(0x08000000, 0x00200000, 0xe0200000)
BOOT_PARAMS(0x08000100)
MAPIO(mx1ads_map_io)
INITIRQ(imx_init_irq)
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_ram = 0x08000000,
.phys_io = 0x00200000,
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
.map_io = mx1ads_map_io,
.init_irq = imx_init_irq,
.timer = &imx_timer,
INIT_MACHINE(mx1ads_init)
.init_machine = mx1ads_init,
MACHINE_END

View file

@ -292,11 +292,13 @@ static struct sys_timer ap_timer = {
};
MACHINE_START(INTEGRATOR, "ARM-Integrator")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
BOOT_PARAMS(0x00000100)
MAPIO(ap_map_io)
INITIRQ(ap_init_irq)
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_ram = 0x00000000,
.phys_io = 0x16000000,
.io_pg_offst = ((0xf1600000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ap_map_io,
.init_irq = ap_init_irq,
.timer = &ap_timer,
INIT_MACHINE(ap_init)
.init_machine = ap_init,
MACHINE_END

View file

@ -532,11 +532,13 @@ static struct sys_timer cp_timer = {
};
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
BOOT_PARAMS(0x00000100)
MAPIO(intcp_map_io)
INITIRQ(intcp_init_irq)
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_ram = 0x00000000,
.phys_io = 0x16000000,
.io_pg_offst = ((0xf1600000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = intcp_map_io,
.init_irq = intcp_init_irq,
.timer = &cp_timer,
INIT_MACHINE(intcp_init)
.init_machine = intcp_init,
MACHINE_END

View file

@ -146,23 +146,27 @@ extern void iop321_init_time(void);
#if defined(CONFIG_ARCH_IQ80321)
MACHINE_START(IQ80321, "Intel IQ80321")
MAINTAINER("Intel Corporation")
BOOT_MEM(PHYS_OFFSET, IQ80321_UART, IQ80321_UART)
MAPIO(iq80321_map_io)
INITIRQ(iop321_init_irq)
/* Maintainer: Intel Corporation */
.phys_ram = PHYS_OFFSET,
.phys_io = IQ80321_UART,
.io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
.map_io = iq80321_map_io,
.init_irq = iop321_init_irq,
.timer = &iop321_timer,
BOOT_PARAMS(0xa0000100)
INIT_MACHINE(iop32x_init)
.boot_params = 0xa0000100,
.init_machine = iop32x_init,
MACHINE_END
#elif defined(CONFIG_ARCH_IQ31244)
MACHINE_START(IQ31244, "Intel IQ31244")
MAINTAINER("Intel Corp.")
BOOT_MEM(PHYS_OFFSET, IQ31244_UART, IQ31244_UART)
MAPIO(iq31244_map_io)
INITIRQ(iop321_init_irq)
/* Maintainer: Intel Corp. */
.phys_ram = PHYS_OFFSET,
.phys_io = IQ31244_UART,
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
.map_io = iq31244_map_io,
.init_irq = iop321_init_irq,
.timer = &iop321_timer,
BOOT_PARAMS(0xa0000100)
INIT_MACHINE(iop32x_init)
.boot_params = 0xa0000100,
.init_machine = iop32x_init,
MACHINE_END
#else
#error No machine descriptor defined for this IOP3XX implementation

View file

@ -148,26 +148,28 @@ extern void iq80332_map_io(void);
#if defined(CONFIG_ARCH_IQ80331)
MACHINE_START(IQ80331, "Intel IQ80331")
MAINTAINER("Intel Corp.")
BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
//BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
MAPIO(iq80331_map_io)
INITIRQ(iop331_init_irq)
/* Maintainer: Intel Corp. */
.phys_ram = PHYS_OFFSET,
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
.map_io = iq80331_map_io,
.init_irq = iop331_init_irq,
.timer = &iop331_timer,
BOOT_PARAMS(0x0100)
INIT_MACHINE(iop33x_init)
.boot_params = 0x0100,
.init_machine = iop33x_init,
MACHINE_END
#elif defined(CONFIG_MACH_IQ80332)
MACHINE_START(IQ80332, "Intel IQ80332")
MAINTAINER("Intel Corp.")
BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical
//BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS)
MAPIO(iq80332_map_io)
INITIRQ(iop331_init_irq)
/* Maintainer: Intel Corp. */
.phys_ram = PHYS_OFFSET,
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
.map_io = iq80332_map_io,
.init_irq = iop331_init_irq,
.timer = &iop331_timer,
BOOT_PARAMS(0x0100)
INIT_MACHINE(iop33x_init)
.boot_params = 0x0100,
.init_machine = iop33x_init,
MACHINE_END
#else

View file

@ -23,7 +23,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mm.h>
#include <asm/types.h>
@ -125,19 +125,6 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
}
};
static struct uart_port ixp2000_serial_port = {
.membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
.mapbase = IXP2000_UART_PHYS_BASE + 3,
.irq = IRQ_IXP2000_UART,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 50000000,
.line = 0,
.type = PORT_XSCALE,
.fifosize = 16
};
void __init ixp2000_map_io(void)
{
extern unsigned int processor_id;
@ -157,12 +144,50 @@ void __init ixp2000_map_io(void)
}
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
early_serial_setup(&ixp2000_serial_port);
/* Set slowport to 8-bit mode. */
ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
}
/*************************************************************************
* Serial port support for IXP2000
*************************************************************************/
static struct plat_serial8250_port ixp2000_serial_port[] = {
{
.mapbase = IXP2000_UART_PHYS_BASE,
.membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
.irq = IRQ_IXP2000_UART,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 50000000,
},
{ },
};
static struct resource ixp2000_uart_resource = {
.start = IXP2000_UART_PHYS_BASE,
.end = IXP2000_UART_PHYS_BASE + 0xffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device ixp2000_serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = ixp2000_serial_port,
},
.num_resources = 1,
.resource = &ixp2000_uart_resource,
};
void __init ixp2000_uart_init(void)
{
platform_device_register(&ixp2000_serial_device);
}
/*************************************************************************
* Timer-tick functions for IXP2000
*************************************************************************/

View file

@ -219,17 +219,20 @@ static struct platform_device *enp2611_devices[] __initdata = {
static void __init enp2611_init_machine(void)
{
platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
ixp2000_uart_init();
}
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
MAINTAINER("Lennert Buytenhek <buytenh@wantstofly.org>")
BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
BOOT_PARAMS(0x00000100)
MAPIO(ixp2000_map_io)
INITIRQ(ixp2000_init_irq)
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_ram = 0x00000000,
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixp2000_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
INIT_MACHINE(enp2611_init_machine)
.init_machine = enp2611_init_machine,
MACHINE_END

View file

@ -168,12 +168,14 @@ void ixdp2400_init_irq(void)
}
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
MAINTAINER("MontaVista Software, Inc.")
BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
BOOT_PARAMS(0x00000100)
MAPIO(ixdp2x00_map_io)
INITIRQ(ixdp2400_init_irq)
/* Maintainer: MontaVista Software, Inc. */
.phys_ram = 0x00000000,
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
INIT_MACHINE(ixdp2x00_init_machine)
.init_machine = ixdp2x00_init_machine,
MACHINE_END

View file

@ -284,12 +284,14 @@ void ixdp2800_init_irq(void)
}
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
MAINTAINER("MontaVista Software, Inc.")
BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE)
BOOT_PARAMS(0x00000100)
MAPIO(ixdp2x00_map_io)
INITIRQ(ixdp2800_init_irq)
/* Maintainer: MontaVista Software, Inc. */
.phys_ram = 0x00000000,
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
INIT_MACHINE(ixdp2x00_init_machine)
.init_machine = ixdp2x00_init_machine,
MACHINE_END

View file

@ -303,5 +303,6 @@ void __init ixdp2x00_init_machine(void)
gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
ixp2000_uart_init();
}

Some files were not shown because too many files have changed in this diff Show more