Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

This commit is contained in:
David Woodhouse 2005-08-17 14:37:55 +01:00
commit 327b6b08d6
123 changed files with 977 additions and 1156 deletions

View file

@ -33,3 +33,6 @@ The result of the execution of this aml method is
attached to /proc/acpi/hotkey/poll_method, which is dnyamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.
Note: Use cmdline "acpi_generic_hotkey" to over-ride
loading any platform specific drivers.

View file

@ -0,0 +1,93 @@
S3C24XX USB Host support
========================
Introduction
------------
This document details the S3C2410/S3C2440 in-built OHCI USB host support.
Configuration
-------------
Enable at least the following kernel options:
menuconfig:
Device Drivers --->
USB support --->
<*> Support for Host-side USB
<*> OHCI HCD support
.config:
CONFIG_USB
CONFIG_USB_OHCI_HCD
Once these options are configured, the standard set of USB device
drivers can be configured and used.
Board Support
-------------
The driver attaches to a platform device, which will need to be
added by the board specific support file in linux/arch/arm/mach-s3c2410,
such as mach-bast.c or mach-smdk2410.c
The platform device's platform_data field is only needed if the
board implements extra power control or over-current monitoring.
The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
register, so if both ports are to be used for the host, then it is
the board support file's responsibility to ensure that the second
port is configured to be connected to the OHCI core.
Platform Data
-------------
See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
descriptions of the platform device data. An implementation
can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
The `struct s3c2410_hcd_info` contains a pair of functions
that get called to enable over-current detection, and to
control the port power status.
The ports are numbered 0 and 1.
power_control:
Called to enable or disable the power on the port.
enable_oc:
Called to enable or disable the over-current monitoring.
This should claim or release the resources being used to
check the power condition on the port, such as an IRQ.
report_oc:
The OHCI driver fills this field in for the over-current code
to call when there is a change to the over-current state on
an port. The ports argument is a bitmask of 1 bit per port,
with bit X being 1 for an over-current on port X.
The function s3c2410_usb_report_oc() has been provided to
ensure this is called correctly.
port[x]:
This is struct describes each port, 0 or 1. The platform driver
should set the flags field of each port to S3C_HCDFLG_USED if
the port is enabled.
Document Author
---------------
Ben Dooks, (c) 2005 Simtec Electronics

View file

@ -159,6 +159,11 @@ running once the system is up.
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
acpi_generic_hotkey [HW,ACPI]
Allow consolidated generic hotkey driver to
over-ride platform specific driver.
See also Documentation/acpi-hotkey.txt.
ad1816= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>
See also Documentation/sound/oss/AD1816.

View file

@ -266,20 +266,6 @@ port an old driver to the new PCI interface. They are no longer present
in the kernel as they aren't compatible with hotplug or PCI domains or
having sane locking.
pcibios_present() and Since ages, you don't need to test presence
pci_present() of PCI subsystem when trying to talk to it.
If it's not there, the list of PCI devices
is empty and all functions for searching for
devices just return NULL.
pcibios_(read|write)_* Superseded by their pci_(read|write)_*
counterparts.
pcibios_find_* Superseded by their pci_get_* counterparts.
pci_for_each_dev() Superseded by pci_get_device()
pci_for_each_dev_reverse() Superseded by pci_find_device_reverse()
pci_for_each_bus() Superseded by pci_find_next_bus()
pci_find_device() Superseded by pci_get_device()
pci_find_subsys() Superseded by pci_get_subsys()
pci_find_slot() Superseded by pci_get_slot()
pcibios_find_class() Superseded by pci_get_class()
pci_find_class() Superseded by pci_get_class()
pci_(read|write)_*_nodev() Superseded by pci_bus_(read|write)_*()

View file

@ -787,7 +787,7 @@ DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: linux-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/developer/dvb.xml
W: http://linuxtv.org/
S: Supported
EATA-DMA SCSI DRIVER
@ -1828,6 +1828,12 @@ P: Greg Kroah-Hartman
M: greg@kroah.com
S: Maintained
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
@ -2204,6 +2210,12 @@ W: http://projects.buici.com/arm
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
SHPC HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
S: Maintained
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com

View file

@ -533,6 +533,13 @@ ENTRY(__switch_to)
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
ldr r6, [r2, #TI_CPU_DOMAIN]!
#if __LINUX_ARM_ARCH__ >= 6
#ifdef CONFIG_CPU_MPCORE
clrex
#else
strex r3, r4, [ip] @ Clear exclusive monitor
#endif
#endif
#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
mra r4, r5, acc0
stmia ip, {r4, r5}

View file

@ -1,4 +1,6 @@
#if __LINUX_ARM_ARCH__ >= 6
#include <linux/config.h>
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
.macro bitop, instr
mov r2, #1
and r3, r0, #7 @ Get bit offset

View file

@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/usb-simtec.c
*
* Copyright (c) 2004 Simtec Electronics
* Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@ -14,6 +14,8 @@
* Modifications:
* 14-Sep-2004 BJD Created
* 18-Oct-2004 BJD Cleanups, and added code to report OC cleared
* 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc
* 09-Aug-2005 BJD Ports powered only if both are enabled
*/
#define DEBUG
@ -47,13 +49,19 @@
* designed boards.
*/
static unsigned int power_state[2];
static void
usb_simtec_powercontrol(int port, int to)
{
pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
if (port == 1)
s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
power_state[port] = to;
if (power_state[0] && power_state[1])
s3c2410_gpio_setpin(S3C2410_GPB4, 0);
else
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
}
static irqreturn_t
@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs)
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_report_oc(info, 3);
s3c2410_usb_report_oc(info, 3);
} else {
pr_debug("usb_simtec: over-current irq (oc cleared)\n");
s3c2410_report_oc(info, 0);
s3c2410_usb_report_oc(info, 0);
}
return IRQ_HANDLED;

View file

@ -383,6 +383,7 @@ static void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
unsigned int user_pgprot;
int cpu_arch = cpu_architecture();
int i;
@ -408,6 +409,9 @@ static void __init build_mem_type_table(void)
}
}
cp = &cache_policies[cachepolicy];
user_pgprot = cp->pte;
/*
* ARMv6 and above have extended page tables.
*/
@ -426,11 +430,18 @@ static void __init build_mem_type_table(void)
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
/*
* Mark the device area as "shared device"
*/
mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
}
cp = &cache_policies[cachepolicy];
/*
* User pages need to be mapped with the ASID
* (iow, non-global)
*/
user_pgprot |= L_PTE_ASID;
}
if (cpu_arch >= CPU_ARCH_ARMv5) {
mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@ -448,7 +459,7 @@ static void __init build_mem_type_table(void)
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
protection_map[i] = __pgprot(v);
}

View file

@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r1, c13, c0, 1 @ set context ID
mov pc, lr
#define nG (1 << 11)
#define APX (1 << 9)
#define AP1 (1 << 5)
#define AP0 (1 << 4)
#define XN (1 << 0)
/*
* cpu_v6_set_pte(ptep, pte)
*
@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm)
ENTRY(cpu_v6_set_pte)
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0x00000ff0
bic r2, r1, #0x000007f0
bic r2, r2, #0x00000003
orr r2, r2, #AP0 | 2
orr r2, r2, #PTE_EXT_AP0 | 2
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
orreq r2, r2, #APX
orreq r2, r2, #PTE_EXT_APX
tst r1, #L_PTE_USER
orrne r2, r2, #AP1 | nG
tstne r2, #APX
bicne r2, r2, #APX | AP0
orrne r2, r2, #PTE_EXT_AP1
tstne r2, #PTE_EXT_APX
bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
tst r1, #L_PTE_YOUNG
biceq r2, r2, #APX | AP1 | AP0
biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
@ tst r1, #L_PTE_EXEC
@ orreq r2, r2, #XN
@ orreq r2, r2, #PTE_EXT_XN
tst r1, #L_PTE_PRESENT
moveq r2, #0

View file

@ -341,7 +341,7 @@ next_sg:
#endif
/* Attach the domains */
for_each_online_cpu(i) {
for_each_cpu_mask(i, *cpu_map) {
struct sched_domain *sd;
#ifdef CONFIG_SCHED_SMT
sd = &per_cpu(cpu_domains, i);

View file

@ -179,7 +179,7 @@ static int can_do_pal_halt = 1;
static int __init nohalt_setup(char * str)
{
pal_halt = 0;
pal_halt = can_do_pal_halt = 0;
return 1;
}
__setup("nohalt", nohalt_setup);

View file

@ -32,32 +32,12 @@
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
/*
* WARNING - magic here
*
* Ok, this is a horrid hack below, but marginally better than the
* alternatives. What we really want is just to initialize
* hvReleaseData in C as in the #if 0 section here. However, gcc
* refuses to believe that (u32)&x is a constant expression, so will
* not allow the xMsNucDataOffset field to be properly initialized.
* So, we declare hvReleaseData in inline asm instead. We use inline
* asm, rather than a .S file, because the assembler won't generate
* the necessary relocation for the LparMap either, unless that symbol
* is declared in the same source file. Finally, we put the asm in a
* dummy, attribute-used function, instead of at file scope, because
* file scope asms don't allow contraints. We want to use the "i"
* constraints to put sizeof() and offsetof() expressions in there,
* because including asm/offsets.h in C code then stringifying causes
* all manner of warnings.
*/
#if 0
struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xSlicNacaAddr = &naca, /* 64-bit Naca address */
.xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
.xMsNucDataOffset = LPARMAP_PHYS,
.xFlags = HVREL_TAGSINACTIVE /* tags inactive */
/* 64 bit */
/* shared processors */
@ -70,63 +50,6 @@ struct HvReleaseData hvReleaseData = {
0xa7, 0x40, 0xf2, 0x4b,
0xf4, 0x4b, 0xf6, 0xf4 },
};
#endif
extern struct HvReleaseData hvReleaseData;
static void __attribute_used__ hvReleaseData_wrapper(void)
{
/* This doesn't appear to need any alignment (even 4 byte) */
asm volatile (
" lparMapPhys = xLparMap - %3\n"
" .data\n"
" .globl hvReleaseData\n"
"hvReleaseData:\n"
" .long 0xc8a5d9c4\n" /* xDesc */
/* "HvRD" in ebcdic */
" .short %0\n" /* xSize */
" .short %1\n" /* xVpdAreasPtrOffset */
" .llong naca\n" /* xSlicNacaAddr */
" .long lparMapPhys\n" /* xMsNucDataOffset */
" .long 0\n" /* xRsvd1 */
" .short %2\n" /* xFlags */
" .short 4\n" /* xVrmIndex - v5r2m0 */
" .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */
" .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */
" .long 0xd38995a4\n" /* xVrmName */
" .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */
" .long 0xf44bf6f4\n"
" . = hvReleaseData + %0\n"
" .previous\n"
: : "i"(sizeof(hvReleaseData)),
"i"(offsetof(struct naca_struct, xItVpdAreas)),
"i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
/* shared processors, HMT allowed */
| 6), /* TEMP: This allows non-GA drivers */
"i"(KERNELBASE)
);
}
struct LparMap __attribute__((aligned (16))) xLparMap = {
.xNumberEsids = HvEsidsToMap,
.xNumberRanges = HvRangesToMap,
.xSegmentTableOffs = STAB0_PAGE,
.xEsids = {
{ .xKernelEsid = GET_ESID(KERNELBASE),
.xKernelVsid = KERNEL_VSID(KERNELBASE), },
{ .xKernelEsid = GET_ESID(VMALLOCBASE),
.xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
},
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
.xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
},
},
};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);

View file

@ -73,3 +73,8 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
ifeq ($(CONFIG_PPC_ISERIES),y)
arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
AFLAGS_head.o += -Iarch/ppc64/kernel
endif

View file

@ -38,6 +38,7 @@
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/hvcall.h>
#include <asm/iSeries/LparMap.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
@ -679,6 +680,11 @@ hardware_interrupt_iSeries_masked:
.globl fwnmi_data_area
fwnmi_data_area:
#ifdef CONFIG_PPC_ISERIES
. = LPARMAP_PHYS
#include "lparmap.s"
#endif /* CONFIG_PPC_ISERIES */
/*
* Vectors for the FWNMI option. Share common code.
*/

View file

@ -0,0 +1,31 @@
/*
* Copyright (C) 2005 Stephen Rothwell IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/iSeries/LparMap.h>
const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
.xNumberEsids = HvEsidsToMap,
.xNumberRanges = HvRangesToMap,
.xSegmentTableOffs = STAB0_PAGE,
.xEsids = {
{ .xKernelEsid = GET_ESID(KERNELBASE),
.xKernelVsid = KERNEL_VSID(KERNELBASE), },
{ .xKernelEsid = GET_ESID(VMALLOCBASE),
.xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
},
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
.xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
},
},
};

View file

@ -1803,7 +1803,7 @@ static void __init fixup_device_tree(void)
if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
== PROM_ERROR)
return;
if (u3_rev != 0x35)
if (u3_rev != 0x35 && u3_rev != 0x37)
return;
/* does it need fixup ? */
if (prom_getproplen(i2c, "interrupts") > 0)

View file

@ -16,6 +16,7 @@
#include <linux/net.h>
#include <linux/compat.h>
#include <net/compat.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/string.h>
@ -297,121 +298,165 @@ asmlinkage int solaris_sendmsg(int fd, struct sol_nmsghdr __user *user_msg, unsi
{
struct socket *sock;
char address[MAX_SOCK_ADDR];
struct iovec iov[UIO_FASTIOV];
struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
unsigned char ctl[sizeof(struct cmsghdr) + 20];
unsigned char *ctl_buf = ctl;
struct msghdr kern_msg;
int err, total_len;
struct msghdr msg_sys;
int err, ctl_len, iov_size, total_len;
if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
return -EFAULT;
if(kern_msg.msg_iovlen > UIO_MAXIOV)
return -EINVAL;
err = verify_compat_iovec(&kern_msg, iov, address, VERIFY_READ);
if (err < 0)
err = -EFAULT;
if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
goto out;
sock = sockfd_lookup(fd, &err);
if (!sock)
goto out;
/* do not move before msg_sys is valid */
err = -EMSGSIZE;
if (msg_sys.msg_iovlen > UIO_MAXIOV)
goto out_put;
/* Check whether to allocate the iovec area*/
err = -ENOMEM;
iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
if (msg_sys.msg_iovlen > UIO_FASTIOV) {
iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
if (!iov)
goto out_put;
}
err = verify_compat_iovec(&msg_sys, iov, address, VERIFY_READ);
if (err < 0)
goto out_freeiov;
total_len = err;
if(kern_msg.msg_controllen) {
struct sol_cmsghdr __user *ucmsg = kern_msg.msg_control;
err = -ENOBUFS;
if (msg_sys.msg_controllen > INT_MAX)
goto out_freeiov;
ctl_len = msg_sys.msg_controllen;
if (ctl_len) {
struct sol_cmsghdr __user *ucmsg = msg_sys.msg_control;
unsigned long *kcmsg;
compat_size_t cmlen;
if (kern_msg.msg_controllen <= sizeof(compat_size_t))
return -EINVAL;
err = -EINVAL;
if (ctl_len <= sizeof(compat_size_t))
goto out_freeiov;
if(kern_msg.msg_controllen > sizeof(ctl)) {
if (ctl_len > sizeof(ctl)) {
err = -ENOBUFS;
ctl_buf = kmalloc(kern_msg.msg_controllen, GFP_KERNEL);
if(!ctl_buf)
ctl_buf = kmalloc(ctl_len, GFP_KERNEL);
if (!ctl_buf)
goto out_freeiov;
}
__get_user(cmlen, &ucmsg->cmsg_len);
kcmsg = (unsigned long *) ctl_buf;
*kcmsg++ = (unsigned long)cmlen;
err = -EFAULT;
if(copy_from_user(kcmsg, &ucmsg->cmsg_level,
kern_msg.msg_controllen - sizeof(compat_size_t)))
if (copy_from_user(kcmsg, &ucmsg->cmsg_level,
ctl_len - sizeof(compat_size_t)))
goto out_freectl;
kern_msg.msg_control = ctl_buf;
msg_sys.msg_control = ctl_buf;
}
kern_msg.msg_flags = solaris_to_linux_msgflags(user_flags);
msg_sys.msg_flags = solaris_to_linux_msgflags(user_flags);
lock_kernel();
sock = sockfd_lookup(fd, &err);
if (sock != NULL) {
if (sock->file->f_flags & O_NONBLOCK)
kern_msg.msg_flags |= MSG_DONTWAIT;
err = sock_sendmsg(sock, &kern_msg, total_len);
sockfd_put(sock);
}
unlock_kernel();
if (sock->file->f_flags & O_NONBLOCK)
msg_sys.msg_flags |= MSG_DONTWAIT;
err = sock_sendmsg(sock, &msg_sys, total_len);
out_freectl:
/* N.B. Use kfree here, as kern_msg.msg_controllen might change? */
if(ctl_buf != ctl)
kfree(ctl_buf);
if (ctl_buf != ctl)
sock_kfree_s(sock->sk, ctl_buf, ctl_len);
out_freeiov:
if(kern_msg.msg_iov != iov)
kfree(kern_msg.msg_iov);
if (iov != iovstack)
sock_kfree_s(sock->sk, iov, iov_size);
out_put:
sockfd_put(sock);
out:
return err;
}
asmlinkage int solaris_recvmsg(int fd, struct sol_nmsghdr __user *user_msg, unsigned int user_flags)
{
struct iovec iovstack[UIO_FASTIOV];
struct msghdr kern_msg;
char addr[MAX_SOCK_ADDR];
struct socket *sock;
struct iovec iovstack[UIO_FASTIOV];
struct iovec *iov = iovstack;
struct msghdr msg_sys;
unsigned long cmsg_ptr;
int err, iov_size, total_len, len;
/* kernel mode address */
char addr[MAX_SOCK_ADDR];
/* user mode address pointers */
struct sockaddr __user *uaddr;
int __user *uaddr_len;
unsigned long cmsg_ptr;
int err, total_len, len = 0;
if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
return -EFAULT;
if(kern_msg.msg_iovlen > UIO_MAXIOV)
return -EINVAL;
uaddr = kern_msg.msg_name;
uaddr_len = &user_msg->msg_namelen;
err = verify_compat_iovec(&kern_msg, iov, addr, VERIFY_WRITE);
if (err < 0)
sock = sockfd_lookup(fd, &err);
if (!sock)
goto out;
err = -EMSGSIZE;
if (msg_sys.msg_iovlen > UIO_MAXIOV)
goto out_put;
/* Check whether to allocate the iovec area*/
err = -ENOMEM;
iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
if (msg_sys.msg_iovlen > UIO_FASTIOV) {
iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
if (!iov)
goto out_put;
}
/*
* Save the user-mode address (verify_iovec will change the
* kernel msghdr to use the kernel address space)
*/
uaddr = (void __user *) msg_sys.msg_name;
uaddr_len = &user_msg->msg_namelen;
err = verify_compat_iovec(&msg_sys, iov, addr, VERIFY_WRITE);
if (err < 0)
goto out_freeiov;
total_len = err;
cmsg_ptr = (unsigned long) kern_msg.msg_control;
kern_msg.msg_flags = 0;
cmsg_ptr = (unsigned long) msg_sys.msg_control;
msg_sys.msg_flags = MSG_CMSG_COMPAT;
lock_kernel();
sock = sockfd_lookup(fd, &err);
if (sock != NULL) {
if (sock->file->f_flags & O_NONBLOCK)
user_flags |= MSG_DONTWAIT;
err = sock_recvmsg(sock, &kern_msg, total_len, user_flags);
if(err >= 0)
len = err;
sockfd_put(sock);
}
unlock_kernel();
if (sock->file->f_flags & O_NONBLOCK)
user_flags |= MSG_DONTWAIT;
if(uaddr != NULL && err >= 0)
err = move_addr_to_user(addr, kern_msg.msg_namelen, uaddr, uaddr_len);
if(err >= 0) {
err = __put_user(linux_to_solaris_msgflags(kern_msg.msg_flags), &user_msg->msg_flags);
if(!err) {
/* XXX Convert cmsg back into userspace 32-bit format... */
err = __put_user((unsigned long)kern_msg.msg_control - cmsg_ptr,
&user_msg->msg_controllen);
}
}
if(kern_msg.msg_iov != iov)
kfree(kern_msg.msg_iov);
out:
err = sock_recvmsg(sock, &msg_sys, total_len, user_flags);
if(err < 0)
return err;
return len;
goto out_freeiov;
len = err;
if (uaddr != NULL) {
err = move_addr_to_user(addr, msg_sys.msg_namelen, uaddr, uaddr_len);
if (err < 0)
goto out_freeiov;
}
err = __put_user(linux_to_solaris_msgflags(msg_sys.msg_flags), &user_msg->msg_flags);
if (err)
goto out_freeiov;
err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
&user_msg->msg_controllen);
if (err)
goto out_freeiov;
err = len;
out_freeiov:
if (iov != iovstack)
sock_kfree_s(sock->sk, iov, iov_size);
out_put:
sockfd_put(sock);
out:
return err;
}

View file

@ -334,7 +334,7 @@ static void __cpuinit tsc_sync_wait(void)
{
if (notscsync || !cpu_has_tsc)
return;
sync_tsc(boot_cpu_id);
sync_tsc(0);
}
static __init int notscsync_setup(char *s)

View file

@ -43,7 +43,7 @@ ACPI_MODULE_NAME ("acpi_motherboard")
*/
#define IS_RESERVED_ADDR(base, len) \
(((len) > 0) && ((base) > 0) && ((base) + (len) < IO_SPACE_LIMIT) \
&& ((base) + (len) > 0x1000))
&& ((base) + (len) > PCIBIOS_MIN_IO))
/*
* Clearing the flag (IORESOURCE_BUSY) allows drivers to use

View file

@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger);
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER*/
int acpi_specific_hotkey_enabled;
int acpi_specific_hotkey_enabled = TRUE;
EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
static unsigned int acpi_irq_irq;
@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
int __init
acpi_hotkey_setup(char *str)
{
acpi_specific_hotkey_enabled = TRUE;
acpi_specific_hotkey_enabled = FALSE;
return 1;
}
__setup("acpi_specific_hotkey", acpi_hotkey_setup);
__setup("acpi_generic_hotkey", acpi_hotkey_setup);
/*
* max_cstate is defined in the base kernel so modules can

View file

@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj)
pr_debug("device class '%s': release.\n", cd->class_id);
if (cd->devt_attr) {
kfree(cd->devt_attr);
cd->devt_attr = NULL;
}
if (cls->release)
cls->release(cd);
else {
@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev)
if (class_dev->dev)
sysfs_remove_link(&class_dev->kobj, "device");
if (class_dev->devt_attr) {
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
kfree(class_dev->devt_attr);
class_dev->devt_attr = NULL;
}
class_device_remove_attrs(class_dev);
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);

View file

@ -261,7 +261,11 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
{
unsigned long long val;
unsigned long pfn;
/* Turn a kernel-virtual address into a physical page frame */
pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
* RED-PEN: on some architectures there is more mapped memory
* than available in mem_map which pfn_valid checks
@ -269,10 +273,10 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
*
* RED-PEN: vmalloc is not supported right now.
*/
if (!pfn_valid(vma->vm_pgoff))
if (!pfn_valid(pfn))
return -EIO;
val = (u64)vma->vm_pgoff << PAGE_SHIFT;
vma->vm_pgoff = __pa(val) >> PAGE_SHIFT;
vma->vm_pgoff = pfn;
return mmap_mem(file, vma);
}

View file

@ -1,5 +1,5 @@
/*
* i8xx_tco 0.07: TCO timer driver for i8xx chipsets
* i8xx_tco: TCO timer driver for i8xx chipsets
*
* (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
* http://www.kernelconcepts.de
@ -63,6 +63,9 @@
* 20050128 Wim Van Sebroeck <wim@iguana.be>
* 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
* chipsets. Also added support for the "undocumented" ICH7 chipset.
* 20050807 Wim Van Sebroeck <wim@iguana.be>
* 0.08 Make sure that the watchdog is only "armed" when started.
* (Kernel Bug 4251)
*/
/*
@ -87,7 +90,7 @@
#include "i8xx_tco.h"
/* Module and version information */
#define TCO_VERSION "0.07"
#define TCO_VERSION "0.08"
#define TCO_MODULE_NAME "i8xx TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
#define PFX TCO_MODULE_NAME ": "
@ -125,10 +128,18 @@ static int tco_timer_start (void)
unsigned char val;
spin_lock(&tco_lock);
/* disable chipset's NO_REBOOT bit */
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
val &= 0xfd;
pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
val = inb (TCO1_CNT + 1);
val &= 0xf7;
outb (val, TCO1_CNT + 1);
val = inb (TCO1_CNT + 1);
spin_unlock(&tco_lock);
if (val & 0x08)
@ -138,13 +149,20 @@ static int tco_timer_start (void)
static int tco_timer_stop (void)
{
unsigned char val;
unsigned char val, val1;
spin_lock(&tco_lock);
/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
val = inb (TCO1_CNT + 1);
val |= 0x08;
outb (val, TCO1_CNT + 1);
val = inb (TCO1_CNT + 1);
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
val1 |= 0x02;
pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
spin_unlock(&tco_lock);
if ((val & 0x08) == 0)
@ -155,6 +173,7 @@ static int tco_timer_stop (void)
static int tco_timer_keepalive (void)
{
spin_lock(&tco_lock);
/* Reload the timer by writing to the TCO Timer Reload register */
outb (0x01, TCO1_RLD);
spin_unlock(&tco_lock);
return 0;
@ -417,9 +436,8 @@ static unsigned char __init i8xx_tco_getdevice (void)
printk (KERN_ERR PFX "failed to get TCOBASE address\n");
return 0;
}
/*
* Check chipset's NO_REBOOT bit
*/
/* Check chipset's NO_REBOOT bit */
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
if (val1 & 0x02) {
val1 &= 0xfd;
@ -430,6 +448,10 @@ static unsigned char __init i8xx_tco_getdevice (void)
return 0; /* Cannot reset NO_REBOOT bit */
}
}
/* Disable reboots untill the watchdog starts */
val1 |= 0x02;
pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
/* Set the TCO_EN bit in SMI_EN register */
if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
@ -505,17 +527,10 @@ out:
static void __exit watchdog_cleanup (void)
{
u8 val;
/* Stop the timer before we leave */
if (!nowayout)
tco_timer_stop ();
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
val |= 0x02;
pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
/* Deregister */
misc_deregister (&i8xx_tco_miscdev);
unregister_reboot_notifier(&i8xx_tco_notifier);

View file

@ -23,8 +23,8 @@
#include <asm/sibyte/sb1250_smbus.h>
static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
{ NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) },
{ NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) }
{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
};
static struct i2c_adapter sibyte_board_adapter[2] = {

View file

@ -1220,7 +1220,7 @@ static int ide_disk_probe(struct device *dev)
goto failed;
g = alloc_disk_node(1 << PARTN_BITS,
pcibus_to_node(drive->hwif->pci_dev->bus));
hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;

View file

@ -960,15 +960,6 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
}
#endif /* MAX_HWIFS > 1 */
static inline int hwif_to_node(ide_hwif_t *hwif)
{
if (hwif->pci_dev)
return pcibus_to_node(hwif->pci_dev->bus);
else
/* Add ways to determine the node of other busses here */
return -1;
}
/*
* init request queue
*/

View file

@ -275,9 +275,9 @@ static int __init ns558_init(void)
static void __exit ns558_exit(void)
{
struct ns558 *ns558;
struct ns558 *ns558, *safe;
list_for_each_entry(ns558, &ns558_list, node) {
list_for_each_entry_safe(ns558, safe, &ns558_list, node) {
gameport_unregister_port(ns558->gameport);
release_region(ns558->io & ~(ns558->size - 1), ns558->size);
kfree(ns558);

View file

@ -188,7 +188,7 @@ config DVB_BCM3510
support this frontend.
config DVB_LGDT330X
tristate "LGDT3302 or LGDT3303 based (DViCO FusionHDTV Gold)"
tristate "LG Electronics LGDT3302/LGDT3303 based"
depends on DVB_CORE
help
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want

View file

@ -172,38 +172,6 @@ static int lgdt330x_SwReset(struct lgdt330x_state* state)
}
}
#ifdef MUTE_TDA9887
static int i2c_write_ntsc_demod (struct lgdt330x_state* state, u8 buf[2])
{
struct i2c_msg msg =
{ .addr = 0x43,
.flags = 0,
.buf = buf,
.len = 2 };
int err;
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
return 0;
}
static void fiddle_with_ntsc_if_demod(struct lgdt330x_state* state)
{
// Experimental code
u8 buf0[] = {0x00, 0x20};
u8 buf1[] = {0x01, 0x00};
u8 buf2[] = {0x02, 0x00};
i2c_write_ntsc_demod(state, buf0);
i2c_write_ntsc_demod(state, buf1);
i2c_write_ntsc_demod(state, buf2);
}
#endif
static int lgdt330x_init(struct dvb_frontend* fe)
{
@ -267,9 +235,6 @@ static int lgdt330x_init(struct dvb_frontend* fe)
chip_name = "LGDT3303";
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
sizeof(lgdt3303_init_data));
#ifdef MUTE_TDA9887
fiddle_with_ntsc_if_demod(state);
#endif
break;
default:
chip_name = "undefined";
@ -772,7 +737,7 @@ error:
static struct dvb_frontend_ops lgdt3302_ops = {
.info = {
.name= "LG Electronics LGDT3302/LGDT3303 VSB/QAM Frontend",
.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
.type = FE_ATSC,
.frequency_min= 54000000,
.frequency_max= 858000000,

View file

@ -53,6 +53,9 @@ config I2O_CONFIG
To compile this support as a module, choose M here: the
module will be called i2o_config.
Note: If you want to use the new API you have to download the
i2o_config patch from http://i2o.shadowconnect.com/
config I2O_CONFIG_OLD_IOCTL
bool "Enable ioctls (OBSOLETE)"
depends on I2O_CONFIG

View file

@ -30,503 +30,9 @@
static struct i2o_driver i2o_config_driver;
/* Special file operations for sysfs */
struct fops_attribute {
struct bin_attribute bin;
struct file_operations fops;
};
/**
* sysfs_read_dummy
*/
static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
size_t count)
{
return 0;
};
/**
* sysfs_write_dummy
*/
static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
size_t count)
{
return 0;
};
/**
* sysfs_create_fops_file - Creates attribute with special file operations
* @kobj: kobject which should contains the attribute
* @attr: attributes which should be used to create file
*
* First creates attribute @attr in kobject @kobj. If it is the first time
* this function is called, merge old fops from sysfs with new one and
* write it back. Afterwords the new fops will be set for the created
* attribute.
*
* Returns 0 on success or negative error code on failure.
*/
static int sysfs_create_fops_file(struct kobject *kobj,
struct fops_attribute *attr)
{
struct file_operations tmp, *fops;
struct dentry *d;
struct qstr qstr;
int rc;
fops = &attr->fops;
if (fops->read)
attr->bin.read = sysfs_read_dummy;
if (fops->write)
attr->bin.write = sysfs_write_dummy;
if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
return rc;
qstr.name = attr->bin.attr.name;
qstr.len = strlen(qstr.name);
qstr.hash = full_name_hash(qstr.name, qstr.len);
if ((d = lookup_hash(&qstr, kobj->dentry))) {
if (!fops->owner) {
memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
if (fops->read)
tmp.read = fops->read;
if (fops->write)
tmp.write = fops->write;
memcpy(fops, &tmp, sizeof(tmp));
}
d->d_inode->i_fop = fops;
} else
sysfs_remove_bin_file(kobj, &attr->bin);
return -ENOENT;
};
/**
* sysfs_remove_fops_file - Remove attribute with special file operations
* @kobj: kobject which contains the attribute
* @attr: attributes which are used to create file
*
* Only wrapper arround sysfs_remove_bin_file()
*
* Returns 0 on success or negative error code on failure.
*/
static inline int sysfs_remove_fops_file(struct kobject *kobj,
struct fops_attribute *attr)
{
return sysfs_remove_bin_file(kobj, &attr->bin);
};
/**
* i2o_config_read_hrt - Returns the HRT of the controller
* @kob: kernel object handle
* @buf: buffer into which the HRT should be copied
* @off: file offset
* @count: number of bytes to read
*
* Put @count bytes starting at @off into @buf from the HRT of the I2O
* controller corresponding to @kobj.
*
* Returns number of bytes copied into buffer.
*/
static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
loff_t offset, size_t count)
{
struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
i2o_hrt *hrt = c->hrt.virt;
u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
if (offset > size)
return 0;
if (offset + count > size)
count = size - offset;
memcpy(buf, (u8 *) hrt + offset, count);
return count;
};
/**
* i2o_config_read_lct - Returns the LCT of the controller
* @kob: kernel object handle
* @buf: buffer into which the LCT should be copied
* @off: file offset
* @count: number of bytes to read
*
* Put @count bytes starting at @off into @buf from the LCT of the I2O
* controller corresponding to @kobj.
*
* Returns number of bytes copied into buffer.
*/
static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
loff_t offset, size_t count)
{
struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
u32 size = c->lct->table_size * 4;
if (offset > size)
return 0;
if (offset + count > size)
count = size - offset;
memcpy(buf, (u8 *) c->lct + offset, count);
return count;
};
#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
};\
\
static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
}; \
\
static struct fops_attribute i2o_config_attr_##_name = { \
.bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
.owner = THIS_MODULE }, \
.size = 0, }, \
.fops = { .write = i2o_config_##_name##_write, \
.read = i2o_config_##_name##_read} \
};
#ifdef CONFIG_I2O_EXT_ADAPTEC
/**
* i2o_config_dpt_reagion - Converts type and id to flash region
* @swtype: type of software module reading
* @swid: id of software which should be read
*
* Converts type and id from I2O spec to the matching region for DPT /
* Adaptec controllers.
*
* Returns region which match type and id or -1 on error.
*/
static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
{
switch (swtype) {
case I2O_SOFTWARE_MODULE_IRTOS:
/*
* content: operation firmware
* region size:
* 0xbc000 for 2554, 3754, 2564, 3757
* 0x170000 for 2865
* 0x17c000 for 3966
*/
if (!swid)
return 0;
break;
case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
/*
* content: BIOS and SMOR
* BIOS size: first 0x8000 bytes
* region size:
* 0x40000 for 2554, 3754, 2564, 3757
* 0x80000 for 2865, 3966
*/
if (!swid)
return 1;
break;
case I2O_SOFTWARE_MODULE_IOP_CONFIG:
switch (swid) {
case 0:
/*
* content: NVRAM defaults
* region size: 0x2000 bytes
*/
return 2;
case 1:
/*
* content: serial number
* region size: 0x2000 bytes
*/
return 3;
}
break;
}
return -1;
};
#endif
/**
* i2o_config_sw_read - Read a software module from controller
* @file: file pointer
* @buf: buffer into which the data should be copied
* @count: number of bytes to read
* @off: file offset
* @swtype: type of software module reading
* @swid: id of software which should be read
*
* Transfers @count bytes at offset @offset from IOP into buffer using
* type @swtype and id @swid as described in I2O spec.
*
* Returns number of bytes copied into buffer or error code on failure.
*/
static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
size_t count, loff_t * offset, u8 swtype,
u32 swid)
{
struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
struct kobject *kobj = sd->s_element;
struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
u32 m, function = I2O_CMD_SW_UPLOAD;
struct i2o_dma buffer;
struct i2o_message __iomem *msg;
u32 __iomem *mptr;
int rc, status;
m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
if (m == I2O_QUEUE_EMPTY)
return -EBUSY;
mptr = &msg->body[3];
if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
i2o_msg_nop(c, m);
return rc;
}
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (c->adaptec) {
mptr = &msg->body[4];
function = I2O_CMD_PRIVATE;
writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
&msg->body[0]);
writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
writel(*offset, &msg->body[2]);
writel(count, &msg->body[3]);
} else
#endif
writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
writel(0xD0000000 | count, mptr++);
writel(buffer.phys, mptr);
writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
writel(i2o_config_driver.context, &msg->u.head[2]);
writel(0, &msg->u.head[3]);
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (!c->adaptec)
#endif
{
writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
writel(0, &msg->body[1]);
writel(swid, &msg->body[2]);
}
status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
if (status == I2O_POST_WAIT_OK) {
if (!(rc = copy_to_user(buf, buffer.virt, count))) {
rc = count;
*offset += count;
}
} else
rc = -EIO;
if (status != -ETIMEDOUT)
i2o_dma_free(&c->pdev->dev, &buffer);
return rc;
};
/**
* i2o_config_sw_write - Write a software module to controller
* @file: file pointer
* @buf: buffer into which the data should be copied
* @count: number of bytes to read
* @off: file offset
* @swtype: type of software module writing
* @swid: id of software which should be written
*
* Transfers @count bytes at offset @offset from buffer to IOP using
* type @swtype and id @swid as described in I2O spec.
*
* Returns number of bytes copied from buffer or error code on failure.
*/
static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
size_t count, loff_t * offset, u8 swtype,
u32 swid)
{
struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
struct kobject *kobj = sd->s_element;
struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
u32 m, function = I2O_CMD_SW_DOWNLOAD;
struct i2o_dma buffer;
struct i2o_message __iomem *msg;
u32 __iomem *mptr;
int rc, status;
m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
if (m == I2O_QUEUE_EMPTY)
return -EBUSY;
mptr = &msg->body[3];
if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
goto nop_msg;
if ((rc = copy_from_user(buffer.virt, buf, count)))
goto free_buffer;
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (c->adaptec) {
mptr = &msg->body[4];
function = I2O_CMD_PRIVATE;
writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
&msg->body[0]);
writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
writel(*offset, &msg->body[2]);
writel(count, &msg->body[3]);
} else
#endif
writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
writel(0xD4000000 | count, mptr++);
writel(buffer.phys, mptr);
writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
writel(i2o_config_driver.context, &msg->u.head[2]);
writel(0, &msg->u.head[3]);
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (!c->adaptec)
#endif
{
writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
writel(0, &msg->body[1]);
writel(swid, &msg->body[2]);
}
status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
if (status != -ETIMEDOUT)
i2o_dma_free(&c->pdev->dev, &buffer);
if (status != I2O_POST_WAIT_OK)
return -EIO;
*offset += count;
return count;
free_buffer:
i2o_dma_free(&c->pdev->dev, &buffer);
nop_msg:
i2o_msg_nop(c, m);
return rc;
};
/* attribute for HRT in sysfs */
static struct bin_attribute i2o_config_hrt_attr = {
.attr = {
.name = "hrt",
.mode = S_IRUGO,
.owner = THIS_MODULE},
.size = 0,
.read = i2o_config_read_hrt
};
/* attribute for LCT in sysfs */
static struct bin_attribute i2o_config_lct_attr = {
.attr = {
.name = "lct",
.mode = S_IRUGO,
.owner = THIS_MODULE},
.size = 0,
.read = i2o_config_read_lct
};
/* IRTOS firmware access */
I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
#ifdef CONFIG_I2O_EXT_ADAPTEC
/*
* attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
* controllers
*/
I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
#endif
/**
* i2o_config_notify_controller_add - Notify of added controller
* @c: the controller which was added
*
* If a I2O controller is added, we catch the notification to add sysfs
* entries.
*/
static void i2o_config_notify_controller_add(struct i2o_controller *c)
{
struct kobject *kobj = &c->exec->device.kobj;
sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (c->adaptec) {
sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
}
#endif
};
/**
* i2o_config_notify_controller_remove - Notify of removed controller
* @c: the controller which was removed
*
* If a I2O controller is removed, we catch the notification to remove the
* sysfs entries.
*/
static void i2o_config_notify_controller_remove(struct i2o_controller *c)
{
struct kobject *kobj = &c->exec->device.kobj;
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (c->adaptec) {
sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
}
#endif
sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
};
/* Config OSM driver struct */
static struct i2o_driver i2o_config_driver = {
.name = OSM_NAME,
.notify_controller_add = i2o_config_notify_controller_add,
.notify_controller_remove = i2o_config_notify_controller_remove
};
#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL

View file

@ -32,6 +32,8 @@
#include <linux/i2o.h>
#include "core.h"
#define OSM_DESCRIPTION "I2O-subsystem"
/* PCI device id table for all I2O controllers */
static struct pci_device_id __devinitdata i2o_pci_ids[] = {
{PCI_DEVICE_CLASS(PCI_CLASS_INTELLIGENT_I2O << 8, 0xffff00)},
@ -66,6 +68,8 @@ static void i2o_pci_free(struct i2o_controller *c)
if (c->base.virt)
iounmap(c->base.virt);
pci_release_regions(c->pdev);
}
/**
@ -84,6 +88,11 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
struct device *dev = &pdev->dev;
int i;
if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
printk(KERN_ERR "%s: device already claimed\n", c->name);
return -ENODEV;
}
for (i = 0; i < 6; i++) {
/* Skip I/O spaces */
if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
@ -138,6 +147,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
c->base.virt = ioremap_nocache(c->base.phys, c->base.len);
if (!c->base.virt) {
printk(KERN_ERR "%s: Unable to map controller.\n", c->name);
i2o_pci_free(c);
return -ENOMEM;
}

View file

@ -42,7 +42,7 @@
#include "wbsd.h"
#define DRIVER_NAME "wbsd"
#define DRIVER_VERSION "1.2"
#define DRIVER_VERSION "1.3"
#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) \

View file

@ -3789,6 +3789,7 @@ e1000_netpoll(struct net_device *netdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev, NULL);
e1000_clean_tx_irq(adapter);
enable_irq(adapter->pdev->irq);
}
#endif

View file

@ -130,12 +130,11 @@ struct sixpack {
#define AX25_6PACK_HEADER_LEN 0
static void sp_start_tx_timer(struct sixpack *);
static void sixpack_decode(struct sixpack *, unsigned char[], int);
static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
/*
* perform the persistence/slottime algorithm for CSMA access. If the
* Perform the persistence/slottime algorithm for CSMA access. If the
* persistence check was successful, write the data to the serial driver.
* Note that in case of DAMA operation, the data is not sent here.
*/
@ -143,7 +142,7 @@ static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
static void sp_xmit_on_air(unsigned long channel)
{
struct sixpack *sp = (struct sixpack *) channel;
int actual;
int actual, when = sp->slottime;
static unsigned char random;
random = random * 17 + 41;
@ -159,20 +158,10 @@ static void sp_xmit_on_air(unsigned long channel)
sp->tty->driver->write(sp->tty, &sp->led_state, 1);
sp->status2 = 0;
} else
sp_start_tx_timer(sp);
mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
}
/* ----> 6pack timer interrupt handler and friends. <---- */
static void sp_start_tx_timer(struct sixpack *sp)
{
int when = sp->slottime;
del_timer(&sp->tx_t);
sp->tx_t.data = (unsigned long) sp;
sp->tx_t.function = sp_xmit_on_air;
sp->tx_t.expires = jiffies + ((when + 1) * HZ) / 100;
add_timer(&sp->tx_t);
}
/* Encapsulate one AX.25 frame and stuff into a TTY queue. */
static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
@ -243,8 +232,7 @@ static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
sp->xleft = count;
sp->xhead = sp->xbuff;
sp->status2 = count;
if (sp->duplex == 0)
sp_start_tx_timer(sp);
sp_xmit_on_air((unsigned long)sp);
}
return;

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCIEHP_H

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -20,7 +20,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <dely.l.sy@intel.com>
* Send feedback to <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHP_H

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -20,7 +20,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <dely.l.sy@intel.com>
* Send feedback to <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -23,7 +23,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/

View file

@ -453,7 +453,7 @@ static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
}
}
static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
void disable_msi_mode(struct pci_dev *dev, int pos, int type)
{
u16 control;
@ -699,6 +699,9 @@ int pci_enable_msi(struct pci_dev* dev)
if (!pci_msi_enable || !dev)
return status;
if (dev->no_msi)
return status;
temp = dev->irq;
if ((status = msi_init()) < 0)

View file

@ -47,6 +47,12 @@ extern int pci_msi_quirk;
#define pci_msi_quirk 0
#endif
#ifdef CONFIG_PCI_MSI
void disable_msi_mode(struct pci_dev *dev, int pos, int type);
#else
static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
#endif
extern int pcie_mch_quirk;
extern struct device_attribute pci_dev_attrs[];
extern struct class_device_attribute class_device_attr_cpuaffinity;

View file

@ -1291,6 +1291,27 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quir
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
/*
* It's possible for the MSI to get corrupted if shpc and acpi
* are used together on certain PXH-based systems.
*/
static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
{
disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
PCI_CAP_ID_MSI);
dev->no_msi = 1;
printk(KERN_WARNING "PCI: PXH quirk detected, "
"disabling MSI for SHPC device\n");
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;

View file

@ -7,6 +7,7 @@
#define __KERNEL_SYSCALLS__
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/delay.h>
@ -459,10 +460,6 @@ static struct task_struct *kenvctrld_task;
static int kenvctrld(void *__unused)
{
daemonize("kenvctrld");
allow_signal(SIGKILL);
kenvctrld_task = current;
printk(KERN_INFO "bbc_envctrl: kenvctrld starting...\n");
last_warning_jiffies = jiffies - WARN_INTERVAL;
for (;;) {
@ -470,7 +467,7 @@ static int kenvctrld(void *__unused)
struct bbc_fan_control *fp;
msleep_interruptible(POLL_INTERVAL);
if (signal_pending(current))
if (kthread_should_stop())
break;
for (tp = all_bbc_temps; tp; tp = tp->next) {
@ -577,7 +574,6 @@ int bbc_envctrl_init(void)
int temp_index = 0;
int fan_index = 0;
int devidx = 0;
int err = 0;
while ((echild = bbc_i2c_getdev(devidx++)) != NULL) {
if (!strcmp(echild->prom_name, "temperature"))
@ -585,9 +581,13 @@ int bbc_envctrl_init(void)
if (!strcmp(echild->prom_name, "fan-control"))
attach_one_fan(echild, fan_index++);
}
if (temp_index != 0 && fan_index != 0)
err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES);
return err;
if (temp_index != 0 && fan_index != 0) {
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
if (IS_ERR(kenvctrld_task))
return PTR_ERR(kenvctrld_task);
}
return 0;
}
static void destroy_one_temp(struct bbc_cpu_temperature *tp)
@ -607,26 +607,7 @@ void bbc_envctrl_cleanup(void)
struct bbc_cpu_temperature *tp;
struct bbc_fan_control *fp;
if (kenvctrld_task != NULL) {
force_sig(SIGKILL, kenvctrld_task);
for (;;) {
struct task_struct *p;
int found = 0;
read_lock(&tasklist_lock);
for_each_process(p) {
if (p == kenvctrld_task) {
found = 1;
break;
}
}
read_unlock(&tasklist_lock);
if (!found)
break;
msleep(1000);
}
kenvctrld_task = NULL;
}
kthread_stop(kenvctrld_task);
tp = all_bbc_temps;
while (tp != NULL) {

View file

@ -24,6 +24,7 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/ioport.h>
@ -1010,14 +1011,11 @@ static int kenvctrld(void *__unused)
poll_interval = 5000; /* TODO env_mon_interval */
daemonize("kenvctrld");
allow_signal(SIGKILL);
kenvctrld_task = current;
printk(KERN_INFO "envctrl: %s starting...\n", current->comm);
for (;;) {
if(msleep_interruptible(poll_interval))
msleep_interruptible(poll_interval);
if (kthread_should_stop())
break;
for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) {
@ -1041,7 +1039,6 @@ static int kenvctrld(void *__unused)
static int __init envctrl_init(void)
{
#ifdef CONFIG_PCI
struct linux_ebus *ebus = NULL;
struct linux_ebus_device *edev = NULL;
struct linux_ebus_child *edev_child = NULL;
@ -1118,9 +1115,11 @@ done:
i2c_childlist[i].addr, (0 == i) ? ("\n") : (" "));
}
err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES);
if (err < 0)
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
if (IS_ERR(kenvctrld_task)) {
err = PTR_ERR(kenvctrld_task);
goto out_deregister;
}
return 0;
@ -1133,37 +1132,13 @@ out_iounmap:
kfree(i2c_childlist[i].tables);
}
return err;
#else
return -ENODEV;
#endif
}
static void __exit envctrl_cleanup(void)
{
int i;
if (NULL != kenvctrld_task) {
force_sig(SIGKILL, kenvctrld_task);
for (;;) {
struct task_struct *p;
int found = 0;
read_lock(&tasklist_lock);
for_each_process(p) {
if (p == kenvctrld_task) {
found = 1;
break;
}
}
read_unlock(&tasklist_lock);
if (!found)
break;
msleep(1000);
}
kenvctrld_task = NULL;
}
kthread_stop(kenvctrld_task);
iounmap(i2c);
misc_deregister(&envctrl_dev);

View file

@ -183,7 +183,7 @@
* cross a page boundy.
*/
#define SEGMENTX_LEN (sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
#define VIRTX_LEN (sizeof(void *) * DC395x_MAX_SG_LISTENTRY)
struct SGentry {
u32 address; /* bus! address */
@ -235,7 +235,6 @@ struct ScsiReqBlk {
u8 sg_count; /* No of HW sg entries for this request */
u8 sg_index; /* Index of HW sg entry for this request */
u32 total_xfer_length; /* Total number of bytes remaining to be transfered */
void **virt_map;
unsigned char *virt_addr; /* Virtual address of current transfer position */
/*
@ -1022,14 +1021,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
reqlen, cmd->request_buffer, cmd->use_sg,
srb->sg_count);
srb->virt_addr = page_address(sl->page);
for (i = 0; i < srb->sg_count; i++) {
u32 seglen = (u32)sg_dma_len(sl + i);
sgp[i].address = (u32)sg_dma_address(sl + i);
u32 busaddr = (u32)sg_dma_address(&sl[i]);
u32 seglen = (u32)sl[i].length;
sgp[i].address = busaddr;
sgp[i].length = seglen;
srb->total_xfer_length += seglen;
srb->virt_map[i] = kmap(sl[i].page);
}
srb->virt_addr = srb->virt_map[0];
sgp += srb->sg_count - 1;
/*
@ -1976,7 +1975,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
int segment = cmd->use_sg;
u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
struct SGentry *psge = srb->segment_x + srb->sg_index;
void **virt = srb->virt_map;
dprintkdbg(DBG_0,
"sg_update_list: Transfered %i of %i bytes, %i remain\n",
@ -2016,16 +2014,16 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
/* We have to walk the scatterlist to find it */
sg = (struct scatterlist *)cmd->request_buffer;
idx = 0;
while (segment--) {
unsigned long mask =
~((unsigned long)sg->length - 1) & PAGE_MASK;
if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK);
srb->virt_addr = (page_address(sg->page)
+ psge->address -
(psge->address & PAGE_MASK));
return;
}
++sg;
++idx;
}
dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
@ -2151,7 +2149,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
}
/*
* calculate all the residue data that not yet transfered
* calculate all the residue data that not yet tranfered
* SCSI transfer counter + left in SCSI FIFO data
*
* .....TRM_S1040_SCSI_COUNTER (24bits)
@ -3269,7 +3267,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
struct scsi_cmnd *cmd = srb->cmd;
enum dma_data_direction dir = cmd->sc_data_direction;
if (cmd->use_sg && dir != PCI_DMA_NONE) {
int i;
/* unmap DC395x SG list */
dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
srb->sg_bus_addr, SEGMENTX_LEN);
@ -3279,8 +3276,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
cmd->use_sg, cmd->request_buffer);
/* unmap the sg segments */
for (i = 0; i < srb->sg_count; i++)
kunmap(virt_to_page(srb->virt_map[i]));
pci_unmap_sg(acb->dev,
(struct scatterlist *)cmd->request_buffer,
cmd->use_sg, dir);
@ -3327,7 +3322,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (cmd->use_sg) {
struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer;
ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset);
ptr = (struct ScsiInqData *)(page_address(sg->page) + sg->offset);
} else {
ptr = (struct ScsiInqData *)(cmd->request_buffer);
}
@ -4262,9 +4257,8 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
kfree(acb->srb_array[i].segment_x);
vfree(acb->srb_array[0].virt_map);
if (acb->srb_array[i].segment_x)
kfree(acb->srb_array[i].segment_x);
}
@ -4280,12 +4274,9 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
int srb_idx = 0;
unsigned i = 0;
struct SGentry *ptr;
void **virt_array;
for (i = 0; i < DC395x_MAX_SRB_CNT; i++) {
for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
acb->srb_array[i].segment_x = NULL;
acb->srb_array[i].virt_map = NULL;
}
dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
while (pages--) {
@ -4306,19 +4297,6 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
ptr + (i * DC395x_MAX_SG_LISTENTRY);
else
dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*));
if (!virt_array) {
adapter_sg_tables_free(acb);
return 1;
}
for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) {
acb->srb_array[i].virt_map = virt_array;
virt_array += DC395x_MAX_SG_LISTENTRY;
}
return 0;
}

View file

@ -907,9 +907,13 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
raptorFlag = TRUE;
}
if (pci_request_regions(pDev, "dpt_i2o")) {
PERROR("dpti: adpt_config_hba: pci request region failed\n");
return -EINVAL;
}
base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
if (!base_addr_virt) {
pci_release_regions(pDev);
PERROR("dpti: adpt_config_hba: io remap failed\n");
return -EINVAL;
}
@ -919,6 +923,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
if (!msg_addr_virt) {
PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n");
iounmap(base_addr_virt);
pci_release_regions(pDev);
return -EINVAL;
}
} else {
@ -932,6 +937,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
iounmap(msg_addr_virt);
}
iounmap(base_addr_virt);
pci_release_regions(pDev);
return -ENOMEM;
}
memset(pHba, 0, sizeof(adpt_hba));
@ -1027,6 +1033,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba)
up(&adpt_configuration_lock);
iounmap(pHba->base_addr_virt);
pci_release_regions(pHba->pDev);
if(pHba->msg_addr_virt != pHba->base_addr_virt){
iounmap(pHba->msg_addr_virt);
}

View file

@ -385,6 +385,7 @@ int ata_scsi_error(struct Scsi_Host *host)
* appropriate place
*/
host->host_failed--;
INIT_LIST_HEAD(&host->eh_cmd_q);
DPRINTK("EXIT\n");
return 0;

View file

@ -468,7 +468,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
for (i = 0; i < last; i++) {
buf[idx++] = cpu_to_le32(sg_dma_address(&sg[i]));
buf[idx++] = cpu_to_le32(sg_dma_len(&sg[i]));
total_len += sg[i].length;
total_len += sg_dma_len(&sg[i]);
}
buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT);
sgt_len = idx * 4;

View file

@ -336,9 +336,23 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
unsigned long flags;
const int size = sizeof(struct scsi_target)
+ shost->transportt->target_size;
struct scsi_target *starget = kmalloc(size, GFP_ATOMIC);
struct scsi_target *starget;
struct scsi_target *found_target;
/*
* Obtain the real parent from the transport. The transport
* is allowed to fail (no error) if there is nothing at that
* target id.
*/
if (shost->transportt->target_parent) {
spin_lock_irqsave(shost->host_lock, flags);
parent = shost->transportt->target_parent(shost, channel, id);
spin_unlock_irqrestore(shost->host_lock, flags);
if (!parent)
return NULL;
}
starget = kmalloc(size, GFP_KERNEL);
if (!starget) {
printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
return NULL;

View file

@ -1022,6 +1022,23 @@ static int fc_rport_match(struct attribute_container *cont,
return &i->rport_attr_cont.ac == cont;
}
/*
* Must be called with shost->host_lock held
*/
static struct device *fc_target_parent(struct Scsi_Host *shost,
int channel, uint id)
{
struct fc_rport *rport;
list_for_each_entry(rport, &fc_host_rports(shost), peers)
if ((rport->channel == channel) &&
(rport->scsi_target_id == id))
return &rport->dev;
return NULL;
}
struct scsi_transport_template *
fc_attach_transport(struct fc_function_template *ft)
{
@ -1058,6 +1075,8 @@ fc_attach_transport(struct fc_function_template *ft)
/* Transport uses the shost workq for scsi scanning */
i->t.create_work_queue = 1;
i->t.target_parent = fc_target_parent;
/*
* Setup SCSI Target Attributes.
*/

View file

@ -40,6 +40,8 @@
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
#define SCC_WAIT_CLOSING 100
struct uart_cpm_port {
struct uart_port port;
u16 rx_nrfifos;
@ -67,6 +69,8 @@ struct uart_cpm_port {
int bits;
/* Keep track of 'odd' SMC2 wirings */
int is_portb;
/* wait on close if needed */
int wait_closing;
};
extern int cpm_uart_port_map[UART_NR];

View file

@ -12,6 +12,7 @@
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
* (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -70,6 +71,20 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
/**************************************************************/
static inline unsigned long cpu2cpm_addr(void *addr)
{
if ((unsigned long)addr >= CPM_ADDR)
return (unsigned long)addr;
return virt_to_bus(addr);
}
static inline void *cpm2cpu_addr(unsigned long addr)
{
if (addr >= CPM_ADDR)
return (void *)addr;
return bus_to_virt(addr);
}
/*
* Check, if transmit buffers are processed
*/
@ -143,10 +158,13 @@ static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start)
}
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo))
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
else
smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
@ -243,7 +261,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
}
/* get pointer */
cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
/* loop through the buffer */
while (i-- > 0) {
@ -265,13 +283,14 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
} /* End while (i--) */
/* This BD is ready to be used again. Clear status. get next */
bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
bdp->cbd_sc |= BD_SC_EMPTY;
if (bdp->cbd_sc & BD_SC_WRAP)
bdp = pinfo->rx_bd_base;
else
bdp++;
} /* End for (;;) */
/* Write back buffer pointer */
@ -336,22 +355,22 @@ static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
if (IS_SMC(pinfo)) {
events = smcp->smc_smce;
smcp->smc_smce = events;
if (events & SMCM_BRKE)
uart_handle_break(port);
if (events & SMCM_RX)
cpm_uart_int_rx(port, regs);
if (events & SMCM_TX)
cpm_uart_int_tx(port, regs);
smcp->smc_smce = events;
} else {
events = sccp->scc_scce;
sccp->scc_scce = events;
if (events & UART_SCCM_BRKE)
uart_handle_break(port);
if (events & UART_SCCM_RX)
cpm_uart_int_rx(port, regs);
if (events & UART_SCCM_TX)
cpm_uart_int_tx(port, regs);
sccp->scc_scce = events;
}
return (events) ? IRQ_HANDLED : IRQ_NONE;
}
@ -360,6 +379,7 @@ static int cpm_uart_startup(struct uart_port *port)
{
int retval;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
int line = pinfo - cpm_uart_ports;
pr_debug("CPM uart[%d]:startup\n", port->line);
@ -376,9 +396,19 @@ static int cpm_uart_startup(struct uart_port *port)
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
}
if (!(pinfo->flags & FLAG_CONSOLE))
cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
return 0;
}
inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
{
unsigned long target_jiffies = jiffies + pinfo->wait_closing;
while (!time_after(jiffies, target_jiffies))
schedule();
}
/*
* Shutdown the uart
*/
@ -394,6 +424,12 @@ static void cpm_uart_shutdown(struct uart_port *port)
/* If the port is not the console, disable Rx and Tx. */
if (!(pinfo->flags & FLAG_CONSOLE)) {
/* Wait for all the BDs marked sent */
while(!cpm_uart_tx_empty(port))
schedule_timeout(2);
if(pinfo->wait_closing)
cpm_uart_wait_until_send(pinfo);
/* Stop uarts */
if (IS_SMC(pinfo)) {
volatile smc_t *smcp = pinfo->smcp;
@ -569,7 +605,8 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
p = bus_to_virt(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr);
*p++ = xmit->buf[xmit->tail];
bdp->cbd_datlen = 1;
bdp->cbd_sc |= BD_SC_READY;
@ -595,7 +632,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
count = 0;
p = bus_to_virt(bdp->cbd_bufaddr);
p = cpm2cpu_addr(bdp->cbd_bufaddr);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@ -606,6 +643,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
}
bdp->cbd_datlen = count;
bdp->cbd_sc |= BD_SC_READY;
__asm__("eieio");
/* Get next BD. */
if (bdp->cbd_sc & BD_SC_WRAP)
bdp = pinfo->tx_bd_base;
@ -643,12 +681,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = virt_to_bus(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += pinfo->rx_fifosize;
}
bdp->cbd_bufaddr = virt_to_bus(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Set the physical address of the host memory
@ -658,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
bdp->cbd_bufaddr = virt_to_bus(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_INTRPT;
mem_addr += pinfo->tx_fifosize;
}
bdp->cbd_bufaddr = virt_to_bus(mem_addr);
bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
}
@ -763,6 +801,8 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
/* Using idle charater time requires some additional tuning. */
up->smc_mrblr = pinfo->rx_fifosize;
up->smc_maxidl = pinfo->rx_fifosize;
up->smc_brklen = 0;
up->smc_brkec = 0;
up->smc_brkcr = 1;
cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
@ -815,6 +855,10 @@ static int cpm_uart_request_port(struct uart_port *port)
return ret;
cpm_uart_initbd(pinfo);
if (IS_SMC(pinfo))
cpm_uart_init_smc(pinfo);
else
cpm_uart_init_scc(pinfo);
return 0;
}
@ -902,6 +946,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc1_lineif,
.wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC2] = {
.port = {
@ -915,6 +960,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc2_lineif,
.wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC3] = {
.port = {
@ -928,6 +974,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc3_lineif,
.wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC4] = {
.port = {
@ -941,6 +988,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc4_lineif,
.wait_closing = SCC_WAIT_CLOSING,
},
};
@ -983,10 +1031,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
cp = (unsigned char *) (bdp->cbd_bufaddr);
else
cp = bus_to_virt(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
*cp = *s;
@ -1003,10 +1048,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
while ((bdp->cbd_sc & BD_SC_READY) != 0)
;
if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
cp = (unsigned char *) (bdp->cbd_bufaddr);
else
cp = bus_to_virt(bdp->cbd_bufaddr);
cp = cpm2cpu_addr(bdp->cbd_bufaddr);
*cp = 13;
bdp->cbd_datlen = 1;
@ -1092,14 +1134,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
return 0;
}
extern struct uart_driver cpm_reg;
static struct uart_driver cpm_reg;
static struct console cpm_scc_uart_console = {
.name "ttyCPM",
.write cpm_uart_console_write,
.device uart_console_device,
.setup cpm_uart_console_setup,
.flags CON_PRINTBUFFER,
.index -1,
.name = "ttyCPM",
.write = cpm_uart_console_write,
.device = uart_console_device,
.setup = cpm_uart_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &cpm_reg,
};

View file

@ -82,6 +82,17 @@ void cpm_line_cr_cmd(int line, int cmd)
void smc1_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
/* Enable SMC1 transceivers */
{
cp->cp_pepar |= 0x000000c0;
cp->cp_pedir &= ~0x000000c0;
cp->cp_peso &= ~0x00000040;
cp->cp_peso |= 0x00000080;
}
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x000000c0;
if (!pinfo->is_portb) {
@ -93,41 +104,33 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
#ifdef CONFIG_MPC885ADS
/* Enable SMC1 transceivers */
{
volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
uint tmp;
tmp = in_be32(bcsr1);
tmp &= ~BCSR1_RS232EN_1;
out_be32(bcsr1, tmp);
iounmap(bcsr1);
}
#endif
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
#ifdef CONFIG_MPC885ADS
volatile cpm8xx_t *cp = cpmp;
volatile uint __iomem *bcsr1;
uint tmp;
(void)cp; /* fix warning */
#if defined (CONFIG_MPC885ADS)
cp->cp_pepar |= 0x00000c00;
cp->cp_pedir &= ~0x00000c00;
cp->cp_peso &= ~0x00000400;
cp->cp_peso |= 0x00000800;
#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x00000c00;
if (!pinfo->is_portb) {
cp->cp_pbpar |= iobits;
cp->cp_pbdir &= ~iobits;
cp->cp_pbodr &= ~iobits;
} else {
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
/* Enable SMC2 transceivers */
bcsr1 = ioremap(BCSR1, 4);
tmp = in_be32(bcsr1);
tmp &= ~BCSR1_RS232EN_2;
out_be32(bcsr1, tmp);
iounmap(bcsr1);
#endif
pinfo->brg = 2;
@ -185,6 +188,8 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
/* was hostalloc but changed cause it blows away the */
/* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = 0;
} else

View file

@ -342,9 +342,6 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
goto exit;
}
x = le16_to_cpu(*(__le16 *) &data[2]);
y = le16_to_cpu(*(__le16 *) &data[4]);
input_regs(dev, regs);
if (data[1] & 0x10) { /* in prox */
@ -373,15 +370,17 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
}
}
if (data[1] & 0x80) {
if (data[1] & 0x90) {
x = le16_to_cpu(*(__le16 *) &data[2]);
y = le16_to_cpu(*(__le16 *) &data[4]);
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
}
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
}
}
input_report_key(dev, wacom->tool[0], data[1] & 0x10);
@ -568,7 +567,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return;
goto exit;
if (wacom->features->type >= INTUOS3) {
input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));

View file

@ -2,6 +2,8 @@
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* mon_main.c: Main file, module initiation and exit, registrations, etc.
*
* Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#include <linux/kernel.h>
@ -311,7 +313,7 @@ static int __init mon_init(void)
mondir = debugfs_create_dir("usbmon", NULL);
if (IS_ERR(mondir)) {
printk(KERN_NOTICE TAG ": debugs is not available\n");
printk(KERN_NOTICE TAG ": debugfs is not available\n");
return -ENODEV;
}
if (mondir == NULL) {

View file

@ -1,5 +1,7 @@
/*
* The USB Monitor, inspired by Dave Harding's USBMon.
*
* Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
*/
#ifndef __USB_MON_H

View file

@ -628,7 +628,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
int
fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
{
int err;
int err, flags = info->flags;
if (var->activate & FB_ACTIVATE_INV_MODE) {
struct fb_videomode mode1, mode2;
@ -682,7 +682,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
!list_empty(&info->modelist))
err = fb_add_videomode(&mode, &info->modelist);
if (!err && info->flags & FBINFO_MISC_USEREVENT) {
if (!err && (flags & FBINFO_MISC_USEREVENT)) {
struct fb_event event;
info->flags &= ~FBINFO_MISC_USEREVENT;

View file

@ -583,23 +583,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
/* Map the fb and MMIO regions */
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
(dinfo->aperture.physical, dinfo->aperture.size);
if (!dinfo->aperture.virtual) {
ERR_MSG("Cannot remap FB region.\n");
cleanup(dinfo);
return -ENODEV;
}
dinfo->mmio_base =
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
INTEL_REG_SIZE);
if (!dinfo->mmio_base) {
ERR_MSG("Cannot remap MMIO region.\n");
cleanup(dinfo);
return -ENODEV;
}
/* Get the chipset info. */
dinfo->pci_chipset = pdev->device;
@ -630,9 +613,15 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
dinfo->accel = 0;
}
if (MB(voffset) < stolen_size)
offset = (stolen_size >> 12);
else
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
/* Framebuffer parameters - Use all the stolen memory if >= vram */
if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) + MB(vram))) {
dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
dinfo->fb.offset = 0;
dinfo->fbmem_gart = 0;
} else {
dinfo->fb.size = MB(vram);
@ -663,11 +652,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
if (MB(voffset) < stolen_size)
offset = (stolen_size >> 12);
else
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
/* set the mem offsets - set them after the already used pages */
if (dinfo->accel) {
dinfo->ring.offset = offset + gtt_info.current_memory;
@ -682,6 +666,26 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
+ (dinfo->cursor.size >> 12);
}
/* Map the fb and MMIO regions */
/* ioremap only up to the end of used aperture */
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
(dinfo->aperture.physical, (dinfo->fb.offset << 12)
+ dinfo->fb.size);
if (!dinfo->aperture.virtual) {
ERR_MSG("Cannot remap FB region.\n");
cleanup(dinfo);
return -ENODEV;
}
dinfo->mmio_base =
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
INTEL_REG_SIZE);
if (!dinfo->mmio_base) {
ERR_MSG("Cannot remap MMIO region.\n");
cleanup(dinfo);
return -ENODEV;
}
/* Allocate memories (which aren't stolen) */
if (dinfo->accel) {
if (!(dinfo->gtt_ring_mem =

View file

@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
/* enable LCD controller clock */
pxa_set_cken(CKEN16_LCD, 1);
/* Sequence from 11.7.10 */
LCCR3 = fbi->reg_lccr3;
LCCR2 = fbi->reg_lccr2;
@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
/* disable LCD controller clock */
pxa_set_cken(CKEN16_LCD, 0);
}
/*
@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev)
ret = -ENOMEM;
goto failed;
}
/* enable LCD controller clock */
pxa_set_cken(CKEN16_LCD, 1);
ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
if (ret) {

View file

@ -593,7 +593,7 @@ void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
* Return 0 - device(s) present, 1 - no devices present.
*/
if (w1_reset_bus(dev)) {
dev_info(&dev->dev, "No devices present on the wire.\n");
dev_dbg(&dev->dev, "No devices present on the wire.\n");
break;
}

View file

@ -1,3 +1,9 @@
Version 1.35
------------
Add writepage performance improvements. Fix path name conversions
for long filenames on mounts which were done with "mapchars" mount option
specified.
Version 1.34
------------
Fix error mapping of the TOO_MANY_LINKS (hardlinks) case.

View file

@ -2602,6 +2602,9 @@ int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
if(name_len < PATH_MAX) {
memcpy(pSMB->ResumeFileName, psrch_inf->presume_name, name_len);
byte_count += name_len;
/* 14 byte parm len above enough for 2 byte null terminator */
pSMB->ResumeFileName[name_len] = 0;
pSMB->ResumeFileName[name_len+1] = 0;
} else {
rc = -EINVAL;
goto FNext2_err_exit;

View file

@ -611,6 +611,7 @@ cifsConvertToUCS(__le16 * target, const char *source, int maxlen,
src_char = source[i];
switch (src_char) {
case 0:
target[j] = 0;
goto ctoUCS_out;
case ':':
target[j] = cpu_to_le16(UNI_COLON);

View file

@ -402,7 +402,7 @@ static struct inotify_watch *create_watch(struct inotify_device *dev,
return ERR_PTR(ret);
}
dev->last_wd = ret;
dev->last_wd = watch->wd;
watch->mask = mask;
atomic_set(&watch->count, 0);
INIT_LIST_HEAD(&watch->d_list);

View file

@ -128,6 +128,10 @@ void jfs_delete_inode(struct inode *inode)
{
jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
if (is_bad_inode(inode) ||
(JFS_IP(inode)->fileset != cpu_to_le32(FILESYSTEM_I)))
return;
if (test_cflag(COMMIT_Freewmap, inode))
jfs_free_zero_link(inode);

View file

@ -191,7 +191,7 @@ static int lbmIOWait(struct lbuf * bp, int flag);
static bio_end_io_t lbmIODone;
static void lbmStartIO(struct lbuf * bp);
static void lmGCwrite(struct jfs_log * log, int cant_block);
static int lmLogSync(struct jfs_log * log, int nosyncwait);
static int lmLogSync(struct jfs_log * log, int hard_sync);
@ -915,19 +915,17 @@ static void lmPostGC(struct lbuf * bp)
* if new sync address is available
* (normally the case if sync() is executed by back-ground
* process).
* if not, explicitly run jfs_blogsync() to initiate
* getting of new sync address.
* calculate new value of i_nextsync which determines when
* this code is called again.
*
* PARAMETERS: log - log structure
* nosyncwait - 1 if called asynchronously
* hard_sync - 1 to force all metadata to be written
*
* RETURN: 0
*
* serialization: LOG_LOCK() held on entry/exit
*/
static int lmLogSync(struct jfs_log * log, int nosyncwait)
static int lmLogSync(struct jfs_log * log, int hard_sync)
{
int logsize;
int written; /* written since last syncpt */
@ -941,11 +939,18 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
unsigned long flags;
/* push dirty metapages out to disk */
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_flush(sbi->ipbmap->i_mapping);
filemap_flush(sbi->ipimap->i_mapping);
filemap_flush(sbi->direct_inode->i_mapping);
}
if (hard_sync)
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_fdatawrite(sbi->ipbmap->i_mapping);
filemap_fdatawrite(sbi->ipimap->i_mapping);
filemap_fdatawrite(sbi->direct_inode->i_mapping);
}
else
list_for_each_entry(sbi, &log->sb_list, log_list) {
filemap_flush(sbi->ipbmap->i_mapping);
filemap_flush(sbi->ipimap->i_mapping);
filemap_flush(sbi->direct_inode->i_mapping);
}
/*
* forward syncpt
@ -1021,10 +1026,6 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
/* next syncpt trigger = written + more */
log->nextsync = written + more;
/* return if lmLogSync() from outside of transaction, e.g., sync() */
if (nosyncwait)
return lsn;
/* if number of bytes written from last sync point is more
* than 1/4 of the log size, stop new transactions from
* starting until all current transactions are completed
@ -1049,11 +1050,12 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
*
* FUNCTION: write log SYNCPT record for specified log
*
* PARAMETERS: log - log structure
* PARAMETERS: log - log structure
* hard_sync - set to 1 to force metadata to be written
*/
void jfs_syncpt(struct jfs_log *log)
void jfs_syncpt(struct jfs_log *log, int hard_sync)
{ LOG_LOCK(log);
lmLogSync(log, 1);
lmLogSync(log, hard_sync);
LOG_UNLOCK(log);
}

View file

@ -510,6 +510,6 @@ extern int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize);
extern int lmGroupCommit(struct jfs_log *, struct tblock *);
extern int jfsIOWait(void *);
extern void jfs_flush_journal(struct jfs_log * log, int wait);
extern void jfs_syncpt(struct jfs_log *log);
extern void jfs_syncpt(struct jfs_log *log, int hard_sync);
#endif /* _H_JFS_LOGMGR */

View file

@ -552,6 +552,11 @@ void txEnd(tid_t tid)
* synchronize with logsync barrier
*/
if (test_bit(log_SYNCBARRIER, &log->flag)) {
TXN_UNLOCK();
/* write dirty metadata & forward log syncpt */
jfs_syncpt(log, 1);
jfs_info("log barrier off: 0x%x", log->lsn);
/* enable new transactions start */
@ -560,11 +565,6 @@ void txEnd(tid_t tid)
/* wakeup all waitors for logsync barrier */
TXN_WAKEUP(&log->syncwait);
TXN_UNLOCK();
/* forward log syncpt */
jfs_syncpt(log);
goto wakeup;
}
}
@ -657,7 +657,9 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
/* only anonymous txn.
* Remove from anon_list
*/
TXN_LOCK();
list_del_init(&jfs_ip->anon_inode_list);
TXN_UNLOCK();
}
jfs_ip->atlhead = tlck->next;
} else {

View file

@ -114,6 +114,8 @@ static void jfs_destroy_inode(struct inode *inode)
{
struct jfs_inode_info *ji = JFS_IP(inode);
BUG_ON(!list_empty(&ji->anon_inode_list));
spin_lock_irq(&ji->ag_lock);
if (ji->active_ag != -1) {
struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
@ -531,7 +533,7 @@ static int jfs_sync_fs(struct super_block *sb, int wait)
/* log == NULL indicates read-only mount */
if (log) {
jfs_flush_journal(log, wait);
jfs_syncpt(log);
jfs_syncpt(log, 0);
}
return 0;

View file

@ -2216,7 +2216,8 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
if (!error) {
const char *new_name = old_dentry->d_name.name;
fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir,
new_dentry->d_inode, old_dentry->d_inode);
}
fsnotify_oldname_free(old_name);

View file

@ -814,28 +814,39 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr)
nfs_wb_all(inode);
}
error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr);
if (error == 0) {
if (error == 0)
nfs_refresh_inode(inode, &fattr);
nfs_end_data_update(inode);
unlock_kernel();
return error;
}
/**
* nfs_setattr_update_inode - Update inode metadata after a setattr call.
* @inode: pointer to struct inode
* @attr: pointer to struct iattr
*
* Note: we do this in the *proc.c in order to ensure that
* it works for things like exclusive creates too.
*/
void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr)
{
if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0) {
if ((attr->ia_valid & ATTR_MODE) != 0) {
int mode;
mode = inode->i_mode & ~S_IALLUGO;
mode |= attr->ia_mode & S_IALLUGO;
int mode = attr->ia_mode & S_IALLUGO;
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
}
if ((attr->ia_valid & ATTR_UID) != 0)
inode->i_uid = attr->ia_uid;
if ((attr->ia_valid & ATTR_GID) != 0)
inode->i_gid = attr->ia_gid;
if ((attr->ia_valid & ATTR_SIZE) != 0) {
inode->i_size = attr->ia_size;
vmtruncate(inode, attr->ia_size);
}
}
if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0)
NFS_FLAGS(inode) |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
nfs_end_data_update(inode);
unlock_kernel();
return error;
}
if ((attr->ia_valid & ATTR_SIZE) != 0) {
inode->i_size = attr->ia_size;
vmtruncate(inode, attr->ia_size);
}
}
/*

View file

@ -120,6 +120,8 @@ nfs3_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
dprintk("NFS call setattr\n");
fattr->valid = 0;
status = rpc_call(NFS_CLIENT(inode), NFS3PROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
dprintk("NFS reply setattr: %d\n", status);
return status;
}
@ -370,6 +372,8 @@ again:
* not sure this buys us anything (and I'd have
* to revamp the NFSv3 XDR code) */
status = nfs3_proc_setattr(dentry, &fattr, sattr);
if (status == 0)
nfs_setattr_update_inode(dentry->d_inode, sattr);
nfs_refresh_inode(dentry->d_inode, &fattr);
dprintk("NFS reply setattr (post-create): %d\n", status);
}

View file

@ -753,6 +753,7 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
.rpc_argp = &arg,
.rpc_resp = &res,
};
int status;
fattr->valid = 0;
@ -762,7 +763,8 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
} else
memcpy(&arg.stateid, &zero_stateid, sizeof(arg.stateid));
return rpc_call_sync(server->client, &msg, 0);
status = rpc_call_sync(server->client, &msg, 0);
return status;
}
static int nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
@ -1145,6 +1147,8 @@ nfs4_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
status = nfs4_do_setattr(NFS_SERVER(inode), fattr,
NFS_FH(inode), sattr, state);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
if (state != NULL)
nfs4_close_state(state, FMODE_WRITE);
put_rpccred(cred);
@ -1449,8 +1453,10 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
struct nfs_fattr fattr;
status = nfs4_do_setattr(NFS_SERVER(dir), &fattr,
NFS_FH(state->inode), sattr, state);
if (status == 0)
if (status == 0) {
nfs_setattr_update_inode(state->inode, sattr);
goto out;
}
} else if (flags != 0)
goto out;
nfs4_close_state(state, flags);

View file

@ -114,6 +114,8 @@ nfs_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
dprintk("NFS call setattr\n");
fattr->valid = 0;
status = rpc_call(NFS_CLIENT(inode), NFSPROC_SETATTR, &arg, fattr, 0);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
dprintk("NFS reply setattr: %d\n", status);
return status;
}

View file

@ -239,6 +239,7 @@ nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
if (xdr_decode_word(buf, base, &entries) ||
entries > NFS_ACL_MAX_ENTRIES)
return -EINVAL;
nfsacl_desc.desc.array_maxlen = entries;
err = xdr_decode_array2(buf, base + 4, &nfsacl_desc.desc);
if (err)
return err;

View file

@ -174,6 +174,9 @@ ToDo/Notes:
fact that the vfs and ntfs inodes are one struct in memory to find
the ntfs inode in memory if present. Also, the ntfs inode has its
own locking so it does not matter if the vfs inode is locked.
- Fix bug in mft record writing where we forgot to set the device in
the buffers when mapping them after the VM had discarded them
Thanks to Martin MOKREJŠ for the bug report.
2.1.22 - Many bug and race fixes and error handling improvements.

View file

@ -533,6 +533,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no,
LCN lcn;
unsigned int vcn_ofs;
bh->b_bdev = vol->sb->s_bdev;
/* Obtain the vcn and offset of the current block. */
vcn = ((VCN)mft_no << vol->mft_record_size_bits) +
(block_start - m_start);
@ -725,6 +726,7 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync)
LCN lcn;
unsigned int vcn_ofs;
bh->b_bdev = vol->sb->s_bdev;
/* Obtain the vcn and offset of the current block. */
vcn = ((VCN)ni->mft_no << vol->mft_record_size_bits) +
(block_start - m_start);

View file

@ -593,6 +593,9 @@ static int new_inode_init(struct inode *inode, struct inode *dir, int mode)
*/
inode->i_uid = current->fsuid;
inode->i_mode = mode;
/* Make inode invalid - just in case we are going to drop it before
* the initialization happens */
INODE_PKEY(inode)->k_objectid = 0;
if (dir->i_mode & S_ISGID) {
inode->i_gid = dir->i_gid;

View file

@ -12,6 +12,7 @@
* Changelog:
* 11-Sep-2004 BJD Created file
* 21-Sep-2004 BJD Updated port info
* 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc
*/
#ifndef __ASM_ARCH_USBCONTROL_H
@ -35,7 +36,7 @@ struct s3c2410_hcd_info {
void (*report_oc)(struct s3c2410_hcd_info *, int ports);
};
static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
{
if (info->report_oc != NULL) {
(info->report_oc)(info, ports);

View file

@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
/*
* - extended small page/tiny page
*/
#define PTE_EXT_XN (1 << 0) /* v6 */
#define PTE_EXT_AP_MASK (3 << 4)
#define PTE_EXT_AP0 (1 << 4)
#define PTE_EXT_AP1 (2 << 4)
#define PTE_EXT_AP_UNO_SRO (0 << 4)
#define PTE_EXT_AP_UNO_SRW (1 << 4)
#define PTE_EXT_AP_URO_SRW (2 << 4)
#define PTE_EXT_AP_URW_SRW (3 << 4)
#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0)
#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1)
#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0)
#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */
#define PTE_EXT_APX (1 << 9) /* v6 */
#define PTE_EXT_SHARED (1 << 10) /* v6 */
#define PTE_EXT_NG (1 << 11) /* v6 */
/*
* - small page
@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define L_PTE_WRITE (1 << 5)
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */
#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */
#ifndef __ASSEMBLY__

View file

@ -18,9 +18,11 @@ extern unsigned int pcibios_assign_all_busses(void);
#define pcibios_scan_all_fns(a, b) 0
extern unsigned long pci_mem_start;
#define PCIBIOS_MIN_IO 0x4000
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM (pci_mem_start)
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
void pcibios_config_init(void);
struct pci_bus * pcibios_scan_root(int bus);

View file

@ -29,7 +29,7 @@ struct desc_struct {
};
#define desc_empty(desc) \
(!((desc)->a + (desc)->b))
(!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) \
(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))

View file

@ -19,6 +19,8 @@
#ifndef _LPARMAP_H
#define _LPARMAP_H
#ifndef __ASSEMBLY__
#include <asm/types.h>
/*
@ -71,6 +73,11 @@ struct LparMap {
} xRanges[HvRangesToMap];
};
extern struct LparMap xLparMap;
extern const struct LparMap xLparMap;
#endif /* __ASSEMBLY__ */
/* the fixed address where the LparMap exists */
#define LPARMAP_PHYS 0x7000
#endif /* _LPARMAP_H */

Some files were not shown because too many files have changed in this diff Show more