mfd: Add support for Diolan DLN-2 devices

This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
Master Adapter DLN-2. Details about the device can be found here:

https://www.diolan.com/i2c/i2c_interface.html.

Information about the USB protocol can be found in the Programmer's
Reference Manual [1], see section 1.7.

Because the hardware has a single transmit endpoint and a single
receive endpoint the communication between the various DLN2 drivers
and the hardware will be muxed/demuxed by this driver.

Each DLN2 module will be identified by the handle field within the DLN2
message header. If a DLN2 module issues multiple commands in parallel
they will be identified by the echo counter field in the message header.

The DLN2 modules can use the dln2_transfer() function to issue a
command and wait for its response. They can also register a callback
that is going to be called when a specific event id is generated by
the device (e.g. GPIO interrupts). The device uses handle 0 for
sending events.

[1] https://www.diolan.com/downloads/dln-api-manual.pdf

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Octavian Purdila 2014-11-06 15:48:03 +02:00 committed by Lee Jones
parent a7975473cc
commit 338a128142
4 changed files with 877 additions and 0 deletions

View file

@ -183,6 +183,16 @@ config MFD_DA9063
Additional drivers must be enabled in order to use the functionality
of the device.
config MFD_DLN2
tristate "Diolan DLN2 support"
select MFD_CORE
depends on USB
help
This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
etc. must be enabled in order to use the functionality of
the device.
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)

View file

@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o

763
drivers/mfd/dln2.c Normal file
View file

@ -0,0 +1,763 @@
/*
* Driver for the Diolan DLN-2 USB adapter
*
* Copyright (c) 2014 Intel Corporation
*
* Derived from:
* i2c-diolan-u2c.c
* Copyright (c) 2010-2011 Ericsson AB
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/dln2.h>
#include <linux/rculist.h>
struct dln2_header {
__le16 size;
__le16 id;
__le16 echo;
__le16 handle;
};
struct dln2_response {
struct dln2_header hdr;
__le16 result;
};
#define DLN2_GENERIC_MODULE_ID 0x00
#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID)
#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30)
#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31)
#define DLN2_HW_ID 0x200
#define DLN2_USB_TIMEOUT 200 /* in ms */
#define DLN2_MAX_RX_SLOTS 16
#define DLN2_MAX_URBS 16
#define DLN2_RX_BUF_SIZE 512
enum dln2_handle {
DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */
DLN2_HANDLE_CTRL,
DLN2_HANDLE_GPIO,
DLN2_HANDLE_I2C,
DLN2_HANDLES
};
/*
* Receive context used between the receive demultiplexer and the transfer
* routine. While sending a request the transfer routine will look for a free
* receive context and use it to wait for a response and to receive the URB and
* thus the response data.
*/
struct dln2_rx_context {
/* completion used to wait for a response */
struct completion done;
/* if non-NULL the URB contains the response */
struct urb *urb;
/* if true then this context is used to wait for a response */
bool in_use;
};
/*
* Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the
* handle header field to identify the module in dln2_dev.mod_rx_slots and then
* the echo header field to index the slots field and find the receive context
* for a particular request.
*/
struct dln2_mod_rx_slots {
/* RX slots bitmap */
DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS);
/* used to wait for a free RX slot */
wait_queue_head_t wq;
/* used to wait for an RX operation to complete */
struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS];
/* avoid races between alloc/free_rx_slot and dln2_rx_transfer */
spinlock_t lock;
};
struct dln2_dev {
struct usb_device *usb_dev;
struct usb_interface *interface;
u8 ep_in;
u8 ep_out;
struct urb *rx_urb[DLN2_MAX_URBS];
void *rx_buf[DLN2_MAX_URBS];
struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES];
struct list_head event_cb_list;
spinlock_t event_cb_lock;
bool disconnect;
int active_transfers;
wait_queue_head_t disconnect_wq;
spinlock_t disconnect_lock;
};
struct dln2_event_cb_entry {
struct list_head list;
u16 id;
struct platform_device *pdev;
dln2_event_cb_t callback;
};
int dln2_register_event_cb(struct platform_device *pdev, u16 id,
dln2_event_cb_t event_cb)
{
struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
struct dln2_event_cb_entry *i, *entry;
unsigned long flags;
int ret = 0;
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
entry->id = id;
entry->callback = event_cb;
entry->pdev = pdev;
spin_lock_irqsave(&dln2->event_cb_lock, flags);
list_for_each_entry(i, &dln2->event_cb_list, list) {
if (i->id == id) {
ret = -EBUSY;
break;
}
}
if (!ret)
list_add_rcu(&entry->list, &dln2->event_cb_list);
spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
if (ret)
kfree(entry);
return ret;
}
EXPORT_SYMBOL(dln2_register_event_cb);
void dln2_unregister_event_cb(struct platform_device *pdev, u16 id)
{
struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
struct dln2_event_cb_entry *i;
unsigned long flags;
bool found = false;
spin_lock_irqsave(&dln2->event_cb_lock, flags);
list_for_each_entry(i, &dln2->event_cb_list, list) {
if (i->id == id) {
list_del_rcu(&i->list);
found = true;
break;
}
}
spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
if (found) {
synchronize_rcu();
kfree(i);
}
}
EXPORT_SYMBOL(dln2_unregister_event_cb);
/*
* Returns true if a valid transfer slot is found. In this case the URB must not
* be resubmitted immediately in dln2_rx as we need the data when dln2_transfer
* is woke up. It will be resubmitted there.
*/
static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb,
u16 handle, u16 rx_slot)
{
struct device *dev = &dln2->interface->dev;
struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
struct dln2_rx_context *rxc;
bool valid_slot = false;
rxc = &rxs->slots[rx_slot];
/*
* No need to disable interrupts as this lock is not taken in interrupt
* context elsewhere in this driver. This function (or its callers) are
* also not exported to other modules.
*/
spin_lock(&rxs->lock);
if (rxc->in_use && !rxc->urb) {
rxc->urb = urb;
complete(&rxc->done);
valid_slot = true;
}
spin_unlock(&rxs->lock);
if (!valid_slot)
dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot);
return valid_slot;
}
static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo,
void *data, int len)
{
struct dln2_event_cb_entry *i;
rcu_read_lock();
list_for_each_entry_rcu(i, &dln2->event_cb_list, list) {
if (i->id == id) {
i->callback(i->pdev, echo, data, len);
break;
}
}
rcu_read_unlock();
}
static void dln2_rx(struct urb *urb)
{
struct dln2_dev *dln2 = urb->context;
struct dln2_header *hdr = urb->transfer_buffer;
struct device *dev = &dln2->interface->dev;
u16 id, echo, handle, size;
u8 *data;
int len;
int err;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dev_dbg(dev, "urb shutting down with status %d\n", urb->status);
return;
default:
dev_dbg(dev, "nonzero urb status received %d\n", urb->status);
goto out;
}
if (urb->actual_length < sizeof(struct dln2_header)) {
dev_err(dev, "short response: %d\n", urb->actual_length);
goto out;
}
handle = le16_to_cpu(hdr->handle);
id = le16_to_cpu(hdr->id);
echo = le16_to_cpu(hdr->echo);
size = le16_to_cpu(hdr->size);
if (size != urb->actual_length) {
dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n",
handle, id, echo, size, urb->actual_length);
goto out;
}
if (handle >= DLN2_HANDLES) {
dev_warn(dev, "invalid handle %d\n", handle);
goto out;
}
data = urb->transfer_buffer + sizeof(struct dln2_header);
len = urb->actual_length - sizeof(struct dln2_header);
if (handle == DLN2_HANDLE_EVENT) {
dln2_run_event_callbacks(dln2, id, echo, data, len);
} else {
/* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
if (dln2_transfer_complete(dln2, urb, handle, echo))
return;
}
out:
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0)
dev_err(dev, "failed to resubmit RX URB: %d\n", err);
}
static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf,
int *obuf_len, gfp_t gfp)
{
int len;
void *buf;
struct dln2_header *hdr;
len = *obuf_len + sizeof(*hdr);
buf = kmalloc(len, gfp);
if (!buf)
return NULL;
hdr = (struct dln2_header *)buf;
hdr->id = cpu_to_le16(cmd);
hdr->size = cpu_to_le16(len);
hdr->echo = cpu_to_le16(echo);
hdr->handle = cpu_to_le16(handle);
memcpy(buf + sizeof(*hdr), obuf, *obuf_len);
*obuf_len = len;
return buf;
}
static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo,
const void *obuf, int obuf_len)
{
int ret = 0;
int len = obuf_len;
void *buf;
int actual;
buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = usb_bulk_msg(dln2->usb_dev,
usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out),
buf, len, &actual, DLN2_USB_TIMEOUT);
kfree(buf);
return ret;
}
static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot)
{
struct dln2_mod_rx_slots *rxs;
unsigned long flags;
if (dln2->disconnect) {
*slot = -ENODEV;
return true;
}
rxs = &dln2->mod_rx_slots[handle];
spin_lock_irqsave(&rxs->lock, flags);
*slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS);
if (*slot < DLN2_MAX_RX_SLOTS) {
struct dln2_rx_context *rxc = &rxs->slots[*slot];
set_bit(*slot, rxs->bmap);
rxc->in_use = true;
}
spin_unlock_irqrestore(&rxs->lock, flags);
return *slot < DLN2_MAX_RX_SLOTS;
}
static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle)
{
int ret;
int slot;
/*
* No need to timeout here, the wait is bounded by the timeout in
* _dln2_transfer.
*/
ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq,
find_free_slot(dln2, handle, &slot));
if (ret < 0)
return ret;
return slot;
}
static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot)
{
struct dln2_mod_rx_slots *rxs;
struct urb *urb = NULL;
unsigned long flags;
struct dln2_rx_context *rxc;
rxs = &dln2->mod_rx_slots[handle];
spin_lock_irqsave(&rxs->lock, flags);
clear_bit(slot, rxs->bmap);
rxc = &rxs->slots[slot];
rxc->in_use = false;
urb = rxc->urb;
rxc->urb = NULL;
reinit_completion(&rxc->done);
spin_unlock_irqrestore(&rxs->lock, flags);
if (urb) {
int err;
struct device *dev = &dln2->interface->dev;
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0)
dev_err(dev, "failed to resubmit RX URB: %d\n", err);
}
wake_up_interruptible(&rxs->wq);
}
static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd,
const void *obuf, unsigned obuf_len,
void *ibuf, unsigned *ibuf_len)
{
int ret = 0;
int rx_slot;
struct dln2_response *rsp;
struct dln2_rx_context *rxc;
struct device *dev = &dln2->interface->dev;
const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000;
struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
spin_lock(&dln2->disconnect_lock);
if (!dln2->disconnect)
dln2->active_transfers++;
else
ret = -ENODEV;
spin_unlock(&dln2->disconnect_lock);
if (ret)
return ret;
rx_slot = alloc_rx_slot(dln2, handle);
if (rx_slot < 0) {
ret = rx_slot;
goto out_decr;
}
ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len);
if (ret < 0) {
dev_err(dev, "USB write failed: %d\n", ret);
goto out_free_rx_slot;
}
rxc = &rxs->slots[rx_slot];
ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout);
if (ret <= 0) {
if (!ret)
ret = -ETIMEDOUT;
goto out_free_rx_slot;
}
if (dln2->disconnect) {
ret = -ENODEV;
goto out_free_rx_slot;
}
/* if we got here we know that the response header has been checked */
rsp = rxc->urb->transfer_buffer;
if (rsp->hdr.size < sizeof(*rsp)) {
ret = -EPROTO;
goto out_free_rx_slot;
}
if (le16_to_cpu(rsp->result) > 0x80) {
dev_dbg(dev, "%d received response with error %d\n",
handle, le16_to_cpu(rsp->result));
ret = -EREMOTEIO;
goto out_free_rx_slot;
}
if (!ibuf) {
ret = 0;
goto out_free_rx_slot;
}
if (*ibuf_len > rsp->hdr.size - sizeof(*rsp))
*ibuf_len = rsp->hdr.size - sizeof(*rsp);
memcpy(ibuf, rsp + 1, *ibuf_len);
out_free_rx_slot:
free_rx_slot(dln2, handle, rx_slot);
out_decr:
spin_lock(&dln2->disconnect_lock);
dln2->active_transfers--;
spin_unlock(&dln2->disconnect_lock);
if (dln2->disconnect)
wake_up(&dln2->disconnect_wq);
return ret;
}
int dln2_transfer(struct platform_device *pdev, u16 cmd,
const void *obuf, unsigned obuf_len,
void *ibuf, unsigned *ibuf_len)
{
struct dln2_platform_data *dln2_pdata;
struct dln2_dev *dln2;
u16 handle;
dln2 = dev_get_drvdata(pdev->dev.parent);
dln2_pdata = dev_get_platdata(&pdev->dev);
handle = dln2_pdata->handle;
return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf,
ibuf_len);
}
EXPORT_SYMBOL(dln2_transfer);
static int dln2_check_hw(struct dln2_dev *dln2)
{
int ret;
__le32 hw_type;
int len = sizeof(hw_type);
ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER,
NULL, 0, &hw_type, &len);
if (ret < 0)
return ret;
if (len < sizeof(hw_type))
return -EREMOTEIO;
if (le32_to_cpu(hw_type) != DLN2_HW_ID) {
dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n",
le32_to_cpu(hw_type));
return -ENODEV;
}
return 0;
}
static int dln2_print_serialno(struct dln2_dev *dln2)
{
int ret;
__le32 serial_no;
int len = sizeof(serial_no);
struct device *dev = &dln2->interface->dev;
ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0,
&serial_no, &len);
if (ret < 0)
return ret;
if (len < sizeof(serial_no))
return -EREMOTEIO;
dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no));
return 0;
}
static int dln2_hw_init(struct dln2_dev *dln2)
{
int ret;
ret = dln2_check_hw(dln2);
if (ret < 0)
return ret;
return dln2_print_serialno(dln2);
}
static void dln2_free_rx_urbs(struct dln2_dev *dln2)
{
int i;
for (i = 0; i < DLN2_MAX_URBS; i++) {
usb_kill_urb(dln2->rx_urb[i]);
usb_free_urb(dln2->rx_urb[i]);
kfree(dln2->rx_buf[i]);
}
}
static void dln2_free(struct dln2_dev *dln2)
{
dln2_free_rx_urbs(dln2);
usb_put_dev(dln2->usb_dev);
kfree(dln2);
}
static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
struct usb_host_interface *hostif)
{
int i;
int ret;
const int rx_max_size = DLN2_RX_BUF_SIZE;
struct device *dev = &dln2->interface->dev;
for (i = 0; i < DLN2_MAX_URBS; i++) {
dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
if (!dln2->rx_buf[i])
return -ENOMEM;
dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!dln2->rx_urb[i])
return -ENOMEM;
usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev,
usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
if (ret < 0) {
dev_err(dev, "failed to submit RX URB: %d\n", ret);
return ret;
}
}
return 0;
}
static struct dln2_platform_data dln2_pdata_gpio = {
.handle = DLN2_HANDLE_GPIO,
};
/* Only one I2C port seems to be supported on current hardware */
static struct dln2_platform_data dln2_pdata_i2c = {
.handle = DLN2_HANDLE_I2C,
.port = 0,
};
static const struct mfd_cell dln2_devs[] = {
{
.name = "dln2-gpio",
.platform_data = &dln2_pdata_gpio,
.pdata_size = sizeof(struct dln2_platform_data),
},
{
.name = "dln2-i2c",
.platform_data = &dln2_pdata_i2c,
.pdata_size = sizeof(struct dln2_platform_data),
},
};
static void dln2_disconnect(struct usb_interface *interface)
{
struct dln2_dev *dln2 = usb_get_intfdata(interface);
int i, j;
/* don't allow starting new transfers */
spin_lock(&dln2->disconnect_lock);
dln2->disconnect = true;
spin_unlock(&dln2->disconnect_lock);
/* cancel in progress transfers */
for (i = 0; i < DLN2_HANDLES; i++) {
struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i];
unsigned long flags;
spin_lock_irqsave(&rxs->lock, flags);
/* cancel all response waiters */
for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) {
struct dln2_rx_context *rxc = &rxs->slots[j];
if (rxc->in_use)
complete(&rxc->done);
}
spin_unlock_irqrestore(&rxs->lock, flags);
}
/* wait for transfers to end */
wait_event(dln2->disconnect_wq, !dln2->active_transfers);
mfd_remove_devices(&interface->dev);
dln2_free(dln2);
}
static int dln2_probe(struct usb_interface *interface,
const struct usb_device_id *usb_id)
{
struct usb_host_interface *hostif = interface->cur_altsetting;
struct device *dev = &interface->dev;
struct dln2_dev *dln2;
int ret;
int i, j;
if (hostif->desc.bInterfaceNumber != 0 ||
hostif->desc.bNumEndpoints < 2)
return -ENODEV;
dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL);
if (!dln2)
return -ENOMEM;
dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface));
dln2->interface = interface;
usb_set_intfdata(interface, dln2);
init_waitqueue_head(&dln2->disconnect_wq);
for (i = 0; i < DLN2_HANDLES; i++) {
init_waitqueue_head(&dln2->mod_rx_slots[i].wq);
spin_lock_init(&dln2->mod_rx_slots[i].lock);
for (j = 0; j < DLN2_MAX_RX_SLOTS; j++)
init_completion(&dln2->mod_rx_slots[i].slots[j].done);
}
spin_lock_init(&dln2->event_cb_lock);
spin_lock_init(&dln2->disconnect_lock);
INIT_LIST_HEAD(&dln2->event_cb_list);
ret = dln2_setup_rx_urbs(dln2, hostif);
if (ret)
goto out_cleanup;
ret = dln2_hw_init(dln2);
if (ret < 0) {
dev_err(dev, "failed to initialize hardware\n");
goto out_cleanup;
}
ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
if (ret != 0) {
dev_err(dev, "failed to add mfd devices to core\n");
goto out_cleanup;
}
return 0;
out_cleanup:
dln2_free(dln2);
return ret;
}
static const struct usb_device_id dln2_table[] = {
{ USB_DEVICE(0xa257, 0x2013) },
{ }
};
MODULE_DEVICE_TABLE(usb, dln2_table);
static struct usb_driver dln2_driver = {
.name = "dln2",
.probe = dln2_probe,
.disconnect = dln2_disconnect,
.id_table = dln2_table,
};
module_usb_driver(dln2_driver);
MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>");
MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter");
MODULE_LICENSE("GPL v2");

103
include/linux/mfd/dln2.h Normal file
View file

@ -0,0 +1,103 @@
#ifndef __LINUX_USB_DLN2_H
#define __LINUX_USB_DLN2_H
#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8))
struct dln2_platform_data {
u16 handle; /* sub-driver handle (internally used only) */
u8 port; /* I2C/SPI port */
};
/**
* dln2_event_cb_t - event callback function signature
*
* @pdev - the sub-device that registered this callback
* @echo - the echo header field received in the message
* @data - the data payload
* @len - the data payload length
*
* The callback function is called in interrupt context and the data payload is
* only valid during the call. If the user needs later access of the data, it
* must copy it.
*/
typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo,
const void *data, int len);
/**
* dl2n_register_event_cb - register a callback function for an event
*
* @pdev - the sub-device that registers the callback
* @event - the event for which to register a callback
* @event_cb - the callback function
*
* @return 0 in case of success, negative value in case of error
*/
int dln2_register_event_cb(struct platform_device *pdev, u16 event,
dln2_event_cb_t event_cb);
/**
* dln2_unregister_event_cb - unregister the callback function for an event
*
* @pdev - the sub-device that registered the callback
* @event - the event for which to register a callback
*/
void dln2_unregister_event_cb(struct platform_device *pdev, u16 event);
/**
* dln2_transfer - issue a DLN2 command and wait for a response and the
* associated data
*
* @pdev - the sub-device which is issuing this transfer
* @cmd - the command to be sent to the device
* @obuf - the buffer to be sent to the device; it can be NULL if the user
* doesn't need to transmit data with this command
* @obuf_len - the size of the buffer to be sent to the device
* @ibuf - any data associated with the response will be copied here; it can be
* NULL if the user doesn't need the response data
* @ibuf_len - must be initialized to the input buffer size; it will be modified
* to indicate the actual data transferred;
*
* @return 0 for success, negative value for errors
*/
int dln2_transfer(struct platform_device *pdev, u16 cmd,
const void *obuf, unsigned obuf_len,
void *ibuf, unsigned *ibuf_len);
/**
* dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed
*
* @pdev - the sub-device which is issuing this transfer
* @cmd - the command to be sent to the device
* @ibuf - any data associated with the response will be copied here; it can be
* NULL if the user doesn't need the response data
* @ibuf_len - must be initialized to the input buffer size; it will be modified
* to indicate the actual data transferred;
*
* @return 0 for success, negative value for errors
*/
static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd,
void *ibuf, unsigned *ibuf_len)
{
return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len);
}
/**
* dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed
*
* @pdev - the sub-device which is issuing this transfer
* @cmd - the command to be sent to the device
* @obuf - the buffer to be sent to the device; it can be NULL if the
* user doesn't need to transmit data with this command
* @obuf_len - the size of the buffer to be sent to the device
*
* @return 0 for success, negative value for errors
*/
static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd,
const void *obuf, unsigned obuf_len)
{
return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL);
}
#endif