1
0
Fork 0

ARM: SoC platform updates for v4.6

Newly added support for additional SoCs:
 
 - Axis Artpec-6 SoC family
 - Allwinner A83T SoC
 - Mediatek MT7623
 - NXP i.MX6QP SoC
 - ST Microelectronics stm32f469 microcontroller
 
 New features:
 - SMP support for Mediatek mt2701
 - Big-endian support for NXP i.MX
 - DaVinci now uses the new DMA engine dma_slave_map
 - OMAP now uses the new DMA engine dma_slave_map
 - earlyprintk support for palmchip uart on mach-tango
 - delay timer support for orion
 
 Other:
 - Exynos PMU driver moved out to drivers/soc/
 - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu68DGCrR//JCVInAQIHVQ//Wblms+NKj3aKh6m2Sscs/YkSbFaQ4sY2
 rNyfxLIYsLXkth1kbdHRFSMyL68Ym+xutErgw/3HQPB2D1YtYJE3VJ/y8AU92SU3
 oHyQIty+atB8d8zBbtlkWmat94NIfYf0I8PQETreGb1LMaJqAf0mDEDAyorTLZcZ
 UtQ817Ihn7urqwdTJpTO58V41RmY/vflbHI5T6bIjUJn6fF1e/7+VqtMIfq5sjJ6
 0EPEQdu8s5AJ7gcGlGi9I5gAtSnWSA/9phAxul9P8/HrMpUWIxreSEAy8FY7W14F
 4TON3sQrnw7nyA72U80KGIXhgLy7SbEmHcSqyy4YJK3ycdk6VYk0CBO7nWVYAiD1
 knLisOH6jwe0LIj9WXiRR+Y2Q53pXN8SF77pLDahSnvuShnYEjEH5uELHtxe7Vxh
 gn+NH1rDkRTgdYgt4RWlVyUoLkddQWzLb1m4QyQlvxtTR25cJJayXdVX2MRrNPF5
 c1zRa9HH+b8LJQIMdWfo/NoHhHtftkkGGsqHAAaypZqdpyk0j2HpJYk5ecPR4f5C
 /8o/h/5xOI9gEzp/DVYSZ1VAvRqBQGIDfKBXWq6GuoZaF0aN8ISe5IxFn5Yx2F46
 fNaxqiNpWmyywl8D+tSWPFK6aE21AXKGi5zIzexZZqy283aDjlUPI+tgF2GKIuKP
 3ayYTDeBpLI=
 =ynNj
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...
steinar/wifi_calib_4_9_kernel
Linus Torvalds 2016-03-20 14:57:08 -07:00
commit 33b3d2e88c
126 changed files with 2108 additions and 1384 deletions

View File

@ -72,6 +72,5 @@ SunXi family
* Octa ARM Cortex-A7 based SoCs
- Allwinner A83T
+ Not Supported
+ Datasheet
http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf

View File

@ -11,5 +11,6 @@ using one of the following compatible strings:
allwinner,sun7i-a20
allwinner,sun8i-a23
allwinner,sun8i-a33
allwinner,sun8i-a83t
allwinner,sun8i-h3
allwinner,sun9i-a80

View File

@ -12,6 +12,8 @@ Required properties:
Optional properties:
- #dma-channels: Number of DMA channels supported by the controller (defaults
to 32 when not specified)
- #dma-requests: Number of DMA requestor lines supported by the controller
(defaults to 32 when not specified)
"marvell,pdma-1.0"
Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.

View File

@ -951,6 +951,16 @@ F: arch/arm/boot/dts/alpine*
F: arch/arm64/boot/dts/al/
F: drivers/*/*alpine*
ARM/ARTPEC MACHINE SUPPORT
M: Jesper Nilsson <jesper.nilsson@axis.com>
M: Lars Persson <lars.persson@axis.com>
M: Niklas Cassel <niklas.cassel@axis.com>
S: Maintained
L: linux-arm-kernel@axis.com
F: arch/arm/mach-artpec
F: arch/arm/boot/dts/artpec6*
F: drivers/clk/clk-artpec6.c
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
@ -1515,6 +1525,7 @@ F: arch/arm/mach-s5p*/
F: arch/arm/mach-exynos*/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: drivers/soc/samsung/*
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
F: Documentation/arm/Samsung/
@ -2406,8 +2417,9 @@ F: arch/arm/boot/dts/bcm470*
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
L: linux-arm-kernel@lists.infradead.org
T: git git://github.com/broadcom/arm-bcm63xx.git
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/stblinux.git
S: Maintained
F: arch/arm/mach-bcm/bcm63xx.c
F: arch/arm/include/debug/bcm63xx.S

View File

@ -547,6 +547,7 @@ config ARCH_PXA
select CLKSRC_PXA
select CLKSRC_MMIO
select CLKSRC_OF
select CPU_XSCALE if !CPU_XSC3
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select HAVE_IDE
@ -724,6 +725,8 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-alpine/Kconfig"
source "arch/arm/mach-artpec/Kconfig"
source "arch/arm/mach-asm9260/Kconfig"
source "arch/arm/mach-at91/Kconfig"
@ -879,10 +882,16 @@ config ARCH_STM32
select ARCH_HAS_RESET_CONTROLLER
select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
help
Support for STMicroelectronics STM32 processors.
config MACH_STM32F429
bool "STMicrolectronics STM32F429"
depends on ARCH_STM32
default y
# Definitions to make life easier
config ARCH_ACORN
bool

View File

@ -1368,6 +1368,7 @@ config DEBUG_SIRFSOC_UART
config DEBUG_LL_INCLUDE
string
default "debug/sa1100.S" if DEBUG_SA1100
default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
default "debug/at91.S" if DEBUG_AT91_UART
default "debug/asm9260.S" if DEBUG_ASM9260_UART
@ -1656,6 +1657,14 @@ config DEBUG_UART_8250_WORD
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
DEBUG_BRCMSTB_UART
config DEBUG_UART_8250_PALMCHIP
bool "8250 UART is Palmchip BK-310x"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
help
Palmchip provides a UART implementation compatible with 16550
except for having a different register layout. Say Y here if
the debug UART is of this type.
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250

View File

@ -154,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_ALPINE) += alpine
machine-$(CONFIG_ARCH_ARTPEC) += artpec
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm

View File

@ -13,6 +13,7 @@
interrupts = <25>;
#dma-channels = <32>;
#dma-cells = <2>;
#dma-requests = <75>;
status = "okay";
};

View File

@ -12,6 +12,7 @@
interrupts = <25>;
#dma-channels = <32>;
#dma-cells = <2>;
#dma-requests = <100>;
status = "okay";
};

View File

@ -378,6 +378,7 @@ CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_BATTERY_SBS=m

View File

@ -15,7 +15,7 @@
#define AT91_IO_P2V(x) (x)
#endif
#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
@ -24,7 +24,7 @@
.macro addruart, rp, rv, tmp
ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address)
.endm
.macro senduart,rd,rx

View File

@ -11,6 +11,7 @@
*
*/
#include <asm/assembler.h>
#include "imx-uart.h"
/*
@ -34,6 +35,7 @@
.endm
.macro senduart,rd,rx
ARM_BE8(rev \rd, \rd)
str \rd, [\rx, #0x40] @ TXDATA
.endm
@ -42,6 +44,7 @@
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #0x98] @ SR2
ARM_BE8(rev \rd, \rd)
tst \rd, #1 << 3 @ TXDC
beq 1002b @ wait until transmit done
.endm

View File

@ -0,0 +1,11 @@
#include <linux/serial_reg.h>
#undef UART_TX
#undef UART_LSR
#undef UART_MSR
#define UART_TX 1
#define UART_LSR 7
#define UART_MSR 8
#include <debug/8250.S>

View File

@ -20,9 +20,9 @@
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#define UART0_PHYS 0xE0000000
#define UART0_VIRT 0xF0000000
#define UART0_VIRT 0xF0800000
#define UART1_PHYS 0xE0001000
#define UART1_VIRT 0xF0001000
#define UART1_VIRT 0xF0801000
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS

View File

@ -1,6 +1,7 @@
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
depends on ARCH_MULTI_V7
select ALPINE_MSI
select ARM_AMBA
select ARM_GIC
select GENERIC_IRQ_CHIP

View File

@ -0,0 +1,20 @@
menuconfig ARCH_ARTPEC
bool "Axis Communications ARM based ARTPEC SoCs"
depends on ARCH_MULTI_V7
if ARCH_ARTPEC
config MACH_ARTPEC6
bool "Axis ARTPEC-6 ARM Cortex A9 Platform"
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select ARM_GLOBAL_TIMER
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
help
Support for Axis ARTPEC-6 ARM Cortex A9 Platform
endif

View File

@ -0,0 +1 @@
obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o

View File

@ -0,0 +1,72 @@
/*
* ARTPEC-6 device support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/amba/bus.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/syscon.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include <linux/smp.h>
#include <asm/smp_scu.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/psci.h>
#include <linux/arm-smccc.h>
#define ARTPEC6_DMACFG_REGNUM 0x10
#define ARTPEC6_DMACFG_UARTS_BURST 0xff
#define SECURE_OP_L2C_WRITEREG 0xb4000001
static void __init artpec6_init_machine(void)
{
struct regmap *regmap;
regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon");
if (!IS_ERR(regmap)) {
/* Use PL011 DMA Burst Request signal instead of DMA
* Single Request
*/
regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
ARTPEC6_DMACFG_UARTS_BURST);
};
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
{
struct arm_smccc_res res;
arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
0, 0, 0, 0, &res);
WARN_ON(res.a0);
}
static const char * const artpec6_dt_match[] = {
"axis,artpec6",
NULL
};
DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
.l2c_aux_val = 0x0C000000,
.l2c_aux_mask = 0xF3FFFFFF,
.l2c_write_sec = artpec6_l2c310_write_sec,
.init_machine = artpec6_init_machine,
.dt_compat = artpec6_dt_match,
MACHINE_END

View File

@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
unsigned int *cpu,
unsigned int *addr)
{
struct device_node *pmb_dn;
struct of_phandle_args args;
int ret;
@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
return ret;
}
pmb_dn = args.np;
if (args.args_count != 2) {
pr_err("reset-controller does not conform to reset-cells\n");
return -EINVAL;

View File

@ -283,7 +283,7 @@ static const struct smp_operations bcm_smp_ops __initconst = {
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
&bcm_smp_ops);
struct smp_operations nsp_smp_ops __initdata = {
static const struct smp_operations nsp_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = nsp_boot_secondary,
};

View File

@ -17,6 +17,7 @@
#include <linux/ahci_platform.h>
#include <linux/clk.h>
#include <linux/reboot.h>
#include <linux/dmaengine.h>
#include <mach/cputype.h>
#include <mach/common.h>
@ -233,16 +234,54 @@ static const struct platform_device_info da850_edma1_device __initconst = {
.size_data = sizeof(da850_edma1_pdata),
};
static const struct dma_slave_map da830_edma_map[] = {
{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
};
int __init da830_register_edma(struct edma_rsv_info *rsv)
{
struct platform_device *edma_pdev;
da8xx_edma0_pdata.rsv = rsv;
da8xx_edma0_pdata.slave_map = da830_edma_map;
da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
edma_pdev = platform_device_register_full(&da8xx_edma0_device);
return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
}
static const struct dma_slave_map da850_edma0_map[] = {
{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
};
static const struct dma_slave_map da850_edma1_map[] = {
{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
};
int __init da850_register_edma(struct edma_rsv_info *rsv[2])
{
struct platform_device *edma_pdev;
@ -252,11 +291,18 @@ int __init da850_register_edma(struct edma_rsv_info *rsv[2])
da850_edma1_pdata.rsv = rsv[1];
}
da8xx_edma0_pdata.slave_map = da850_edma0_map;
da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
edma_pdev = platform_device_register_full(&da8xx_edma0_device);
if (IS_ERR(edma_pdev)) {
pr_warn("%s: Failed to register eDMA0\n", __func__);
return PTR_ERR(edma_pdev);
}
da850_edma1_pdata.slave_map = da850_edma1_map;
da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
edma_pdev = platform_device_register_full(&da850_edma1_device);
return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
}

View File

@ -13,6 +13,7 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
@ -576,9 +577,28 @@ static s8 queue_priority_mapping[][2] = {
{-1, -1},
};
static const struct dma_slave_map dm355_edma_map[] = {
{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
};
static struct edma_soc_info dm355_edma_pdata = {
.queue_priority_mapping = queue_priority_mapping,
.default_queue = EVENTQ_1,
.slave_map = dm355_edma_map,
.slavecnt = ARRAY_SIZE(dm355_edma_map),
};
static struct resource edma_resources[] = {

View File

@ -17,6 +17,7 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
@ -862,9 +863,30 @@ static s8 dm365_queue_priority_mapping[][2] = {
{-1, -1},
};
static const struct dma_slave_map dm365_edma_map[] = {
{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
};
static struct edma_soc_info dm365_edma_pdata = {
.queue_priority_mapping = dm365_queue_priority_mapping,
.default_queue = EVENTQ_3,
.slave_map = dm365_edma_map,
.slavecnt = ARRAY_SIZE(dm365_edma_map),
};
static struct resource edma_resources[] = {

View File

@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/dmaengine.h>
#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
@ -505,9 +506,20 @@ static s8 queue_priority_mapping[][2] = {
{-1, -1},
};
static const struct dma_slave_map dm644x_edma_map[] = {
{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
};
static struct edma_soc_info dm644x_edma_pdata = {
.queue_priority_mapping = queue_priority_mapping,
.default_queue = EVENTQ_1,
.slave_map = dm644x_edma_map,
.slavecnt = ARRAY_SIZE(dm644x_edma_map),
};
static struct resource edma_resources[] = {

View File

@ -9,6 +9,7 @@
* or implied.
*/
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@ -540,9 +541,19 @@ static s8 dm646x_queue_priority_mapping[][2] = {
{-1, -1},
};
static const struct dma_slave_map dm646x_edma_map[] = {
{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
};
static struct edma_soc_info dm646x_edma_pdata = {
.queue_priority_mapping = dm646x_queue_priority_mapping,
.default_queue = EVENTQ_1,
.slave_map = dm646x_edma_map,
.slavecnt = ARRAY_SIZE(dm646x_edma_map),
};
static struct resource edma_resources[] = {

View File

@ -5,7 +5,7 @@
#
# Licensed under GPLv2
# Configuration options for the EXYNOS4
# Configuration options for the EXYNOS
menuconfig ARCH_EXYNOS
bool "Samsung EXYNOS"
@ -17,6 +17,7 @@ menuconfig ARCH_EXYNOS
select ARM_GIC
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
select EXYNOS_PMU
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@ -25,6 +26,7 @@ menuconfig ARCH_EXYNOS
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_DEV_MFC
select SOC_SAMSUNG
select SRAM
select THERMAL
select THERMAL_OF

View File

@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
# Core
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_PM_SLEEP) += suspend.o

View File

@ -12,7 +12,6 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
#include <linux/of.h>
#include <linux/platform_data/cpuidle-exynos.h>
#define EXYNOS3250_SOC_ID 0xE3472000

View File

@ -11,29 +11,23 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/serial_s3c.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/irqchip.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/memory.h>
#include <mach/map.h>
#include "common.h"
#include "mfc.h"
#include "regs-pmu.h"
void __iomem *pmu_base_addr;
static struct map_desc exynos4_iodesc[] __initdata = {
{
@ -70,11 +64,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
.length = 144 * SZ_1K,
.type = MT_DEVICE,
},
};
@ -230,6 +219,10 @@ static const struct of_device_id exynos_cpufreq_matches[] = {
{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
#ifndef CONFIG_BL_SWITCHER
{ .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
{ .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
#endif
{ /* sentinel */ }
};

View File

@ -20,8 +20,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/suspend.h>
#include <mach/map.h>
#include "common.h"
#include "smc.h"

View File

@ -2,7 +2,7 @@
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* EXYNOS4 - Memory map definitions
* EXYNOS - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -14,30 +14,18 @@
#include <plat/map-base.h>
/*
* EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
* So need to define it, and here is to avoid redefinition warning.
*/
#define S3C_UART_OFFSET (0x10000)
#include <plat/map-s5p.h>
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_DMC1 0x10410000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_SROMC 0x12570000
#define EXYNOS5_PA_SROMC 0x12250000
/* Compatibility UART */
#define EXYNOS5440_PA_UART0 0x000B0000
#endif /* __ASM_ARCH_MAP_H */

View File

@ -16,13 +16,13 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <asm/mcpm.h>
#include <asm/smp_plat.h>
#include "regs-pmu.h"
#include "common.h"
#define EXYNOS5420_CPUS_PER_CLUSTER 4

View File

@ -15,11 +15,11 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
@ -30,7 +30,6 @@
#include <mach/map.h>
#include "common.h"
#include "regs-pmu.h"
extern void exynos4_secondary_startup(void);

View File

@ -17,7 +17,9 @@
#include <linux/suspend.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/soc/samsung/exynos-pmu.h>
#include <asm/firmware.h>
#include <asm/smp_scu.h>
@ -26,11 +28,7 @@
#include <mach/map.h>
#include <plat/pm-common.h>
#include "common.h"
#include "exynos-pmu.h"
#include "regs-pmu.h"
static inline void __iomem *exynos_boot_vector_addr(void)
{

View File

@ -1,967 +0,0 @@
/*
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* EXYNOS - CPU PMU(Power Management Unit) support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/cputype.h>
#include "exynos-pmu.h"
#include "regs-pmu.h"
#define PMU_TABLE_END (-1U)
struct exynos_pmu_conf {
unsigned int offset;
u8 val[NUM_SYS_POWERDOWN];
};
struct exynos_pmu_data {
const struct exynos_pmu_conf *pmu_config;
const struct exynos_pmu_conf *pmu_config_extra;
void (*pmu_init)(void);
void (*powerdown_conf)(enum sys_powerdown);
void (*powerdown_conf_extra)(enum sys_powerdown);
};
struct exynos_pmu_context {
struct device *dev;
const struct exynos_pmu_data *pmu_data;
};
static void __iomem *pmu_base_addr;
static struct exynos_pmu_context *pmu_context;
static inline void pmu_raw_writel(u32 val, u32 offset)
{
writel_relaxed(val, pmu_base_addr + offset);
}
static inline u32 pmu_raw_readl(u32 offset)
{
return readl_relaxed(pmu_base_addr + offset);
}
static struct exynos_pmu_conf exynos3250_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
{ EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ PMU_TABLE_END,},
};
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } },
{ S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } },
{ S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
{ S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
{ S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
{ PMU_TABLE_END,},
};
static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
{ S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } },
/* XXX_OPTION register should be set other field */
{ S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } },
{ S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } },
{ S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } },
{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } },
{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
{ S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } },
{ S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
{ S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } },
{ S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
{ S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } },
{ S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } },
{ S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
{ S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
{ S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
{ S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
{ PMU_TABLE_END,},
};
static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
{ S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
{ S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } },
{ PMU_TABLE_END,},
};
static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
{ EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_USBOTG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_G2D_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_USBDRD_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_SDMMC_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_CSSYS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_SECSS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_ROTATOR_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} },
{ EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ PMU_TABLE_END,},
};
static struct exynos_pmu_conf exynos5420_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} },
{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
{ EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
{ EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ PMU_TABLE_END,},
};
static unsigned int const exynos3250_list_feed[] = {
EXYNOS3_ARM_CORE_OPTION(0),
EXYNOS3_ARM_CORE_OPTION(1),
EXYNOS3_ARM_CORE_OPTION(2),
EXYNOS3_ARM_CORE_OPTION(3),
EXYNOS3_ARM_COMMON_OPTION,
EXYNOS3_TOP_PWR_OPTION,
EXYNOS3_CORE_TOP_PWR_OPTION,
S5P_CAM_OPTION,
S5P_MFC_OPTION,
S5P_G3D_OPTION,
S5P_LCD0_OPTION,
S5P_ISP_OPTION,
};
static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
{
unsigned int i;
unsigned int tmp;
/* Enable only SC_FEEDBACK */
for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
tmp = pmu_raw_readl(exynos3250_list_feed[i]);
tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
pmu_raw_writel(tmp, exynos3250_list_feed[i]);
}
if (mode != SYS_SLEEP)
return;
pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
}
static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_ARM_COMMON_OPTION,
EXYNOS5_GSCL_OPTION,
EXYNOS5_ISP_OPTION,
EXYNOS5_MFC_OPTION,
EXYNOS5_G3D_OPTION,
EXYNOS5_DISP1_OPTION,
EXYNOS5_MAU_OPTION,
EXYNOS5_TOP_PWR_OPTION,
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
static unsigned int const exynos5_list_disable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,
};
static unsigned int const exynos5420_list_disable_pmu_reg[] = {
EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
};
static void exynos5420_powerdown_conf(enum sys_powerdown mode)
{
u32 this_cluster;
this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
/*
* set the cluster id to IROM register to ensure that we wake
* up with the current cluster.
*/
pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
}
static void exynos5_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
unsigned int tmp;
/*
* Enable both SC_FEEDBACK and SC_COUNTER
*/
for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
tmp |= (EXYNOS5_USE_SC_FEEDBACK |
EXYNOS5_USE_SC_COUNTER);
pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
}
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
*/
tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
* Disable WFI/WFE on XXX_OPTION
*/
for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
EXYNOS5_OPTION_USE_STANDBYWFI);
pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
}
}
void exynos_sys_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
const struct exynos_pmu_data *pmu_data;
if (!pmu_context)
return;
pmu_data = pmu_context->pmu_data;
if (pmu_data->powerdown_conf)
pmu_data->powerdown_conf(mode);
if (pmu_data->pmu_config) {
for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
pmu_data->pmu_config[i].offset);
}
if (pmu_data->powerdown_conf_extra)
pmu_data->powerdown_conf_extra(mode);
if (pmu_data->pmu_config_extra) {
for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
pmu_data->pmu_config_extra[i].offset);
}
}
static void exynos3250_pmu_init(void)
{
unsigned int value;
/*
* To prevent from issuing new bus request form L2 memory system
* If core status is power down, should be set '1' to L2 power down
*/
value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
/* Enable USE_STANDBY_WFI for all CORE */
pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
/*
* Set PSHOLD port for output high
*/
value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
value |= S5P_PS_HOLD_OUTPUT_HIGH;
pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
/*
* Enable signal for PSHOLD port
*/
value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
value |= S5P_PS_HOLD_EN;
pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
}
static void exynos5250_pmu_init(void)
{
unsigned int value;
/*
* When SYS_WDTRESET is set, watchdog timer reset request
* is ignored by power management unit.
*/
value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
value &= ~EXYNOS5_SYS_WDTRESET;
pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
value &= ~EXYNOS5_SYS_WDTRESET;
pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
}
static void exynos5420_pmu_init(void)
{
unsigned int value;
int i;
/*
* Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
* for local power blocks to Low initially as per Table 8-4:
* "System-Level Power-Down Configuration Registers".
*/
for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
/* Enable USE_STANDBY_WFI for all CORE */
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
value = pmu_raw_readl(EXYNOS_L2_OPTION(0));
value &= ~EXYNOS5_USE_RETENTION;
pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
value &= ~EXYNOS5_USE_RETENTION;
pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
/*
* If L2_COMMON is turned off, clocks related to ATB async
* bridge are gated. Thus, when ISP power is gated, LPI
* may get stuck.
*/
value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
value |= EXYNOS5420_ATB_ISP_ARM;
pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
value = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
value |= EXYNOS5420_ATB_KFC;
pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
/* Prevent issue of new bus request from L2 memory */
value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
/* This setting is to reduce suspend/resume time */
pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
/* Serialized CPU wakeup of Eagle */
pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
pmu_raw_writel(SPREAD_USE_STANDWFI,
EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
pr_info("EXYNOS5420 PMU initialized\n");
}
static const struct exynos_pmu_data exynos3250_pmu_data = {
.pmu_config = exynos3250_pmu_config,
.pmu_init = exynos3250_pmu_init,
.powerdown_conf_extra = exynos3250_powerdown_conf_extra,
};
static const struct exynos_pmu_data exynos4210_pmu_data = {
.pmu_config = exynos4210_pmu_config,
};
static const struct exynos_pmu_data exynos4212_pmu_data = {
.pmu_config = exynos4x12_pmu_config,
};
static const struct exynos_pmu_data exynos4412_pmu_data = {
.pmu_config = exynos4x12_pmu_config,
.pmu_config_extra = exynos4412_pmu_config,
};
static const struct exynos_pmu_data exynos5250_pmu_data = {
.pmu_config = exynos5250_pmu_config,
.pmu_init = exynos5250_pmu_init,
.powerdown_conf = exynos5_powerdown_conf,
};
static const struct exynos_pmu_data exynos5420_pmu_data = {
.pmu_config = exynos5420_pmu_config,
.pmu_init = exynos5420_pmu_init,
.powerdown_conf = exynos5420_powerdown_conf,
};
/*
* PMU platform driver and devicetree bindings.
*/
static const struct of_device_id exynos_pmu_of_device_ids[] = {
{
.compatible = "samsung,exynos3250-pmu",
.data = &exynos3250_pmu_data,
}, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos4210_pmu_data,
}, {
.compatible = "samsung,exynos4212-pmu",
.data = &exynos4212_pmu_data,
}, {
.compatible = "samsung,exynos4412-pmu",
.data = &exynos4412_pmu_data,
}, {
.compatible = "samsung,exynos5250-pmu",
.data = &exynos5250_pmu_data,
}, {
.compatible = "samsung,exynos5420-pmu",
.data = &exynos5420_pmu_data,
},
{ /*sentinel*/ },
};
static int exynos_pmu_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pmu_base_addr = devm_ioremap_resource(dev, res);
if (IS_ERR(pmu_base_addr))
return PTR_ERR(pmu_base_addr);
pmu_context = devm_kzalloc(&pdev->dev,
sizeof(struct exynos_pmu_context),
GFP_KERNEL);
if (!pmu_context) {
dev_err(dev, "Cannot allocate memory.\n");
return -ENOMEM;
}
pmu_context->dev = dev;
match = of_match_node(exynos_pmu_of_device_ids, dev->of_node);
pmu_context->pmu_data = match->data;
if (pmu_context->pmu_data->pmu_init)
pmu_context->pmu_data->pmu_init();
platform_set_drvdata(pdev, pmu_context);
dev_dbg(dev, "Exynos PMU Driver probe done\n");
return 0;
}
static struct platform_driver exynos_pmu_driver = {
.driver = {
.name = "exynos-pmu",
.of_match_table = exynos_pmu_of_device_ids,
},
.probe = exynos_pmu_probe,
};
static int __init exynos_pmu_init(void)
{
return platform_driver_register(&exynos_pmu_driver);
}
postcore_initcall(exynos_pmu_init);

View File

@ -9,7 +9,6 @@
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/memblock.h>

View File

@ -24,6 +24,8 @@
#include <linux/of_address.h>
#include <linux/err.h>
#include <linux/regulator/machine.h>
#include <linux/soc/samsung/exynos-pmu.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
@ -35,8 +37,6 @@
#include <plat/pm-common.h>
#include "common.h"
#include "exynos-pmu.h"
#include "regs-pmu.h"
#include "regs-srom.h"
#define REG_TABLE_END (-1U)

View File

@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc)
/* irq = gpio irq number */
desc->irq_data.chip->irq_mask(&desc->irq_data);
imr_val = __raw_readw(brd_io + INTR_MASK_REG);
int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
imr_val = imx_readw(brd_io + INTR_MASK_REG);
int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d)
u16 reg;
u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg = imx_readw(brd_io + INTR_MASK_REG);
reg |= (1 << expio);
__raw_writew(reg, brd_io + INTR_MASK_REG);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static void expio_ack_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
imx_writew(1 << expio, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
expio_mask_irq(d);
}
@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d)
u16 reg;
u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg = imx_readw(brd_io + INTR_MASK_REG);
reg &= ~(1 << expio);
__raw_writew(reg, brd_io + INTR_MASK_REG);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static struct irq_chip expio_irq_chip = {
@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
if (brd_io == NULL)
return -ENOMEM;
if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
(__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
(__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
(imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
(imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
pr_info("3-Stack Debug board not detected\n");
iounmap(brd_io);
brd_io = NULL;
@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
gpio_direction_input(intr_gpio);
/* disable the interrupt and clear the status */
__raw_writew(0, brd_io + INTR_MASK_REG);
__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
__raw_writew(0x1F, brd_io + INTR_MASK_REG);
imx_writew(0, brd_io + INTR_MASK_REG);
imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
imx_writew(0x1F, brd_io + INTR_MASK_REG);
irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
WARN_ON(irq_base < 0);

View File

@ -2,7 +2,7 @@ menuconfig ARCH_MXC
bool "Freescale i.MX family"
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
select PINCTRL
@ -511,6 +511,7 @@ config SOC_IMX53
config SOC_IMX6
bool
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
@ -561,6 +562,7 @@ config SOC_IMX7D
bool "i.MX7 Dual support"
select PINCTRL_IMX7D
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select HAVE_IMX_ANATOP
select HAVE_IMX_MMDC
select HAVE_IMX_SRC

View File

@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o

View File

@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void)
switch (digprog & 0xff) {
case 0:
revision = IMX_CHIP_REVISION_1_0;
/*
* For i.MX6QP, most of the code for i.MX6Q can be resued,
* so internally, we identify it as i.MX6Q Rev 2.0
*/
if (digprog >> 8 & 0x01)
revision = IMX_CHIP_REVISION_2_0;
else
revision = IMX_CHIP_REVISION_1_0;
break;
case 1:
revision = IMX_CHIP_REVISION_1_1;
@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void)
revision = IMX_CHIP_REVISION_1_5;
break;
default:
revision = IMX_CHIP_REVISION_UNKNOWN;
/*
* Fail back to return raw register value instead of 0xff.
* It will be easy to know version information in SOC if it
* can't be recognized by known version. And some chip's (i.MX7D)
* digprog value match linux version format, so it needn't map
* again and we can use register value directly.
*/
revision = digprog & 0xff;
}
mxc_set_cpu_type(digprog >> 16 & 0xff);

View File

@ -66,12 +66,12 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
return -EINVAL;
if (irq < AVIC_NUM_IRQS / 2) {
irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= AVIC_NUM_IRQS / 2;
irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
@ -94,8 +94,8 @@ static void avic_irq_suspend(struct irq_data *d)
struct irq_chip_type *ct = gc->chip_types;
int idx = d->hwirq >> 5;
avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask);
imx_writel(gc->wake_active, avic_base + ct->regs.mask);
}
static void avic_irq_resume(struct irq_data *d)
@ -104,7 +104,7 @@ static void avic_irq_resume(struct irq_data *d)
struct irq_chip_type *ct = gc->chip_types;
int idx = d->hwirq >> 5;
__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
}
#else
@ -140,7 +140,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
u32 nivector;
do {
nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16;
if (nivector == 0xffff)
break;
@ -164,16 +164,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
/* put the AVIC into the reset value with
* all interrupts disabled
*/
__raw_writel(0, avic_base + AVIC_INTCNTL);
__raw_writel(0x1f, avic_base + AVIC_NIMASK);
imx_writel(0, avic_base + AVIC_INTCNTL);
imx_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
__raw_writel(0, avic_base + AVIC_INTENABLEH);
__raw_writel(0, avic_base + AVIC_INTENABLEL);
imx_writel(0, avic_base + AVIC_INTENABLEH);
imx_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
imx_writel(0, avic_base + AVIC_INTTYPEH);
imx_writel(0, avic_base + AVIC_INTTYPEL);
irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
WARN_ON(irq_base < 0);
@ -188,7 +188,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
imx_writel(0, avic_base + AVIC_NIPRIORITY(i));
set_handle_irq(avic_handle_irq);

View File

@ -66,6 +66,7 @@ void imx_gpc_check_dt(void);
void imx_gpc_set_arm_power_in_lpm(bool power_off);
void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
void imx25_pm_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */

View File

@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void)
* the silicon revision very early we read it here to
* avoid any further hooks
*/
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);

View File

@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void)
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)

View File

@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void)
{
u32 rev;
rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;

View File

@ -45,20 +45,20 @@ void __init imx_set_aips(void __iomem *base)
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
__raw_writel(0x77777777, base + 0x0);
__raw_writel(0x77777777, base + 0x4);
imx_writel(0x77777777, base + 0x0);
imx_writel(0x77777777, base + 0x4);
/*
* Set all OPACRx to be non-bufferable, to not require
* supervisor privilege level for access, allow for
* write access and untrusted master access.
*/
__raw_writel(0x0, base + 0x40);
__raw_writel(0x0, base + 0x44);
__raw_writel(0x0, base + 0x48);
__raw_writel(0x0, base + 0x4C);
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
imx_writel(0x0, base + 0x40);
imx_writel(0x0, base + 0x44);
imx_writel(0x0, base + 0x48);
imx_writel(0x0, base + 0x4C);
reg = imx_readl(base + 0x50) & 0x00FFFFFF;
imx_writel(reg, base + 0x50);
}
void __init imx_aips_allow_unprivileged_access(

View File

@ -64,23 +64,23 @@ static inline void epit_irq_disable(void)
{
u32 val;
val = __raw_readl(timer_base + EPITCR);
val = imx_readl(timer_base + EPITCR);
val &= ~EPITCR_OCIEN;
__raw_writel(val, timer_base + EPITCR);
imx_writel(val, timer_base + EPITCR);
}
static inline void epit_irq_enable(void)
{
u32 val;
val = __raw_readl(timer_base + EPITCR);
val = imx_readl(timer_base + EPITCR);
val |= EPITCR_OCIEN;
__raw_writel(val, timer_base + EPITCR);
imx_writel(val, timer_base + EPITCR);
}
static void epit_irq_acknowledge(void)
{
__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
imx_writel(EPITSR_OCIF, timer_base + EPITSR);
}
static int __init epit_clocksource_init(struct clk *timer_clk)
@ -98,9 +98,9 @@ static int epit_set_next_event(unsigned long evt,
{
unsigned long tcmp;
tcmp = __raw_readl(timer_base + EPITCNR);
tcmp = imx_readl(timer_base + EPITCNR);
__raw_writel(tcmp - evt, timer_base + EPITCMPR);
imx_writel(tcmp - evt, timer_base + EPITCMPR);
return 0;
}
@ -213,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq)
/*
* Initialise to a known state (all timers off, and timing reset)
*/
__raw_writel(0x0, timer_base + EPITCR);
imx_writel(0x0, timer_base + EPITCR);
__raw_writel(0xffffffff, timer_base + EPITLR);
__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
timer_base + EPITCR);
imx_writel(0xffffffff, timer_base + EPITLR);
imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
timer_base + EPITCR);
/* init and register the timer to the framework */
epit_clocksource_init(timer_clk);

View File

@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
diag_reg_offset:
.word g_diag_reg - .
@ -25,6 +26,7 @@ diag_reg_offset:
.endm
ENTRY(v7_secondary_startup)
ARM_BE8(setend be) @ go BE8 if entered LE
set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)

View File

@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode)
spin_lock(&gpio_mux_lock);
l = __raw_readl(reg);
l = imx_readl(reg);
l &= ~(0xff << (field * 8));
l |= mode << (field * 8);
__raw_writel(l, reg);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
spin_lock(&gpio_mux_lock);
l = __raw_readl(reg);
l = imx_readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
__raw_writel(l, reg);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
u32 l;
spin_lock(&gpio_mux_lock);
l = __raw_readl(IOMUXGPR);
l = imx_readl(IOMUXGPR);
if (en)
l |= gp;
else
l &= ~gp;
__raw_writel(l, IOMUXGPR);
imx_writel(l, IOMUXGPR);
spin_unlock(&gpio_mux_lock);
}

View File

@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports;
static inline unsigned long imx_iomuxv1_readl(unsigned offset)
{
return __raw_readl(imx_iomuxv1_baseaddr + offset);
return imx_readl(imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
{
__raw_writel(val, imx_iomuxv1_baseaddr + offset);
imx_writel(val, imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_rmwl(unsigned offset,

View File

@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
if (mux_ctrl_ofs)
__raw_writel(mux_mode, base + mux_ctrl_ofs);
imx_writel(mux_mode, base + mux_ctrl_ofs);
if (sel_input_ofs)
__raw_writel(sel_input, base + sel_input_ofs);
imx_writel(sel_input, base + sel_input_ofs);
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
imx_writel(pad_ctrl, base + pad_ctrl_ofs);
return 0;
}

View File

@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void)
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
(1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
mx3_ccm_base + MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */

View File

@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.init_early = imx25_init_early,
.init_late = imx25_pm_init,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
MACHINE_END

View File

@ -40,11 +40,10 @@ static void __init imx51_ipu_mipi_setup(void)
WARN_ON(!hsc_addr);
/* setup MIPI module to legacy mode */
__raw_writel(0xf00, hsc_addr);
imx_writel(0xf00, hsc_addr);
/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
hsc_addr + 0x800);
imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800);
iounmap(hsc_addr);
}

View File

@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void)
{
struct device *parent;
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx_get_soc_revision());
if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
else
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx_get_soc_revision());
parent = imx_soc_device_init();
if (parent == NULL)
@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void)
static const char * const imx6q_dt_compat[] __initconst = {
"fsl,imx6dl",
"fsl,imx6q",
"fsl,imx6qp",
NULL,
};

View File

@ -204,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = {
static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
if (value)
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
else
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
@ -366,7 +366,7 @@ static void __init mx27ads_timer_init(void)
{
unsigned long fref = 26000000;
if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
fref = 27000000;
mx27_clocks_init(fref);

View File

@ -160,8 +160,8 @@ static void mx31ads_expio_irq_handler(struct irq_desc *desc)
u32 int_valid;
u32 expio_irq;
imr_val = __raw_readw(PBC_INTMASK_SET_REG);
int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
imr_val = imx_readw(PBC_INTMASK_SET_REG);
int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* mask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
__raw_readw(PBC_INTMASK_CLEAR_REG);
imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
imx_readw(PBC_INTMASK_CLEAR_REG);
}
/*
@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* clear the interrupt status */
__raw_writew(1 << expio, PBC_INTSTATUS_REG);
imx_writew(1 << expio, PBC_INTSTATUS_REG);
}
/*
@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* unmask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
imx_writew(1 << expio, PBC_INTMASK_SET_REG);
}
static struct irq_chip expio_irq_chip = {
@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void)
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
imx_writew(0xFFFF, PBC_INTSTATUS_REG);
irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
WARN_ON(irq_base < 0);

View File

@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void)
mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}
static int mx31moboard_baseboard;

View File

@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = {
static void __init qong_init_nand_mtd(void)
{
/* init CS */
__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);

View File

@ -193,4 +193,9 @@ extern struct cpu_op *(*get_cpu_op)(int *op);
#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
#define imx_readl readl_relaxed
#define imx_readw readw_relaxed
#define imx_writel writel_relaxed
#define imx_writew writew_relaxed
#endif /* __ASM_ARCH_MXC_H__ */

View File

@ -0,0 +1,37 @@
/*
* Copyright 2016 NXP Semiconductors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
static int imx25_suspend_enter(suspend_state_t state)
{
if (!IS_ENABLED(CONFIG_PM))
return 0;
switch (state) {
case PM_SUSPEND_MEM:
cpu_do_idle();
break;
default:
return -EINVAL;
}
return 0;
}
static const struct platform_suspend_ops imx25_suspend_ops = {
.enter = imx25_suspend_enter,
.valid = suspend_valid_only_mem,
};
void __init imx25_pm_init(void)
{
suspend_set_ops(&imx25_suspend_ops);
}

View File

@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
/* Clear MPEN and SPEN to disable MPLL/SPLL */
cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
cpu_do_idle();
break;

View File

@ -22,14 +22,14 @@
*/
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
{
int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
reg &= ~MXC_CCM_CCMR_LPM_MASK;
switch (mode) {
case MX3_WAIT:
if (cpu_is_mx35())
reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
__raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
break;
default:
pr_err("Unknown cpu power mode: %d\n", mode);

View File

@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
int stop_mode = 0;
/* always allow platform to issue a deep sleep mode request */
plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
~(MXC_CORTEXA8_PLAT_LPC_DSM);
ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) &
~(MXC_CCM_CLPCR_LPM_MASK);
arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
~(MXC_SRPGCR_PCR);
empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
~(MXC_SRPGCR_PCR);
empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
~(MXC_SRPGCR_PCR);
switch (mode) {
@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
return;
}
__raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
__raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
if (stop_mode) {
empgc0 |= MXC_SRPGCR_PCR;
empgc1 |= MXC_SRPGCR_PCR;
__raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
}
@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state)
flush_cache_all();
/*clear the EMPGC0/1 bits */
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
if (imx5_suspend_in_ocram_fn)
imx5_suspend_in_ocram_fn(suspend_ocram_base);

View File

@ -561,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
goto put_node;
pl310_cache_map_failed:
iounmap(&pm_info->gpc_base.vbase);
iounmap(pm_info->gpc_base.vbase);
gpc_map_failed:
iounmap(&pm_info->iomuxc_base.vbase);
iounmap(pm_info->iomuxc_base.vbase);
iomuxc_map_failed:
iounmap(&pm_info->src_base.vbase);
iounmap(pm_info->src_base.vbase);
src_map_failed:
iounmap(&pm_info->mmdc_base.vbase);
iounmap(pm_info->mmdc_base.vbase);
put_node:
of_node_put(node);

View File

@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
return 0;
}
static struct reset_control_ops imx_src_ops = {
static const struct reset_control_ops imx_src_ops = {
.reset = imx_src_reset_module,
};

View File

@ -54,7 +54,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
wcr_enable = (1 << 2);
/* Assert SRS signal */
__raw_writew(wcr_enable, wdog_base);
imx_writew(wcr_enable, wdog_base);
/*
* Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
* written twice), we add another two writes to ensure there must be at
@ -62,8 +62,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
* the target check here, since the writes shouldn't be a huge burden
* for other platforms.
*/
__raw_writew(wcr_enable, wdog_base);
__raw_writew(wcr_enable, wdog_base);
imx_writew(wcr_enable, wdog_base);
imx_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
@ -106,6 +106,9 @@ void __init imx_init_l2cache(void)
goto out;
}
if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)
goto skip_if_enabled;
/* Configure the L2 PREFETCH and POWER registers */
val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
val |= 0x70800000;
@ -122,6 +125,7 @@ void __init imx_init_l2cache(void)
val &= ~(1 << 30 | 1 << 23);
writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
skip_if_enabled:
iounmap(l2x0_base);
of_node_put(np);

View File

@ -65,10 +65,10 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
return -EINVAL;
mask = 1U << (irq & 0x1F);
value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
if (type)
value &= ~mask;
__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
imx_writel(value, tzic_base + TZIC_INTSEC0(index));
return 0;
}
@ -82,15 +82,15 @@ static void tzic_irq_suspend(struct irq_data *d)
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
int idx = d->hwirq >> 5;
__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
}
static void tzic_irq_resume(struct irq_data *d)
{
int idx = d->hwirq >> 5;
__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
tzic_base + TZIC_WAKEUP0(idx));
imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)),
tzic_base + TZIC_WAKEUP0(idx));
}
#else
@ -135,8 +135,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
handled = 0;
for (i = 0; i < 4; i++) {
stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
__raw_readl(tzic_base + TZIC_INTSEC0(i));
stat = imx_readl(tzic_base + TZIC_HIPND(i)) &
imx_readl(tzic_base + TZIC_INTSEC0(i));
while (stat) {
handled = 1;
@ -166,18 +166,18 @@ void __init tzic_init_irq(void)
/* put the TZIC into the reset value with
* all interrupts disabled
*/
i = __raw_readl(tzic_base + TZIC_INTCNTL);
i = imx_readl(tzic_base + TZIC_INTCNTL);
__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
imx_writel(0x80010001, tzic_base + TZIC_INTCNTL);
imx_writel(0x1f, tzic_base + TZIC_PRIOMASK);
imx_writel(0x02, tzic_base + TZIC_SYNCCTRL);
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
/* disable all interrupts */
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
/* all IRQ no FIQ Warning :: No selection */
@ -214,13 +214,13 @@ int tzic_enable_wake(void)
{
unsigned int i;
__raw_writel(1, tzic_base + TZIC_DSMINT);
if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
imx_writel(1, tzic_base + TZIC_DSMINT);
if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0))
return -EAGAIN;
for (i = 0; i < 4; i++)
__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
tzic_base + TZIC_WAKEUP0(i));
imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)),
tzic_base + TZIC_WAKEUP0(i));
return 0;
}

View File

@ -44,13 +44,21 @@ static const struct mtk_smp_boot_info mtk_mt6589_boot = {
{ 0x38, 0x3c, 0x40 },
};
static const struct mtk_smp_boot_info mtk_mt7623_boot = {
0x10202000, 0x34,
{ 0x534c4131, 0x4c415332, 0x41534c33 },
{ 0x38, 0x3c, 0x40 },
};
static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
{ .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
{ .compatible = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot },
};
static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
{ .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
};
static void __iomem *mtk_smp_base;

View File

@ -25,6 +25,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
.num_res = 1,
};
/* OMAP730, OMAP850 */
static const struct dma_slave_map omap7xx_sdma_map[] = {
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
};
/* OMAP1510, OMAP1610*/
static const struct dma_slave_map omap1xxx_sdma_map[] = {
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
};
static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.reg_map = reg_map,
.channel_stride = 0x40,
@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
p.dma_attr = d;
p.errata = configure_dma_errata();
if (cpu_is_omap7xx()) {
p.slave_map = omap7xx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
} else {
p.slave_map = omap1xxx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
}
ret = platform_device_add_data(pdev, &p, sizeof(p));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",

View File

@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/of.h>
#include <linux/omap-dma.h>
@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void)
return errata;
}
static const struct dma_slave_map omap24xx_sdma_map[] = {
{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
{ "omap-aes", "tx", SDMA_FILTER_PARAM(9) },
{ "omap-aes", "rx", SDMA_FILTER_PARAM(10) },
{ "omap-sham", "rx", SDMA_FILTER_PARAM(13) },
{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
};
static const struct dma_slave_map omap3xxx_sdma_map[] = {
{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
{ "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) },
{ "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) },
{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
{ "omap-aes", "tx", SDMA_FILTER_PARAM(65) },
{ "omap-aes", "rx", SDMA_FILTER_PARAM(66) },
{ "omap-sham", "rx", SDMA_FILTER_PARAM(69) },
{ "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) },
{ "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) },
{ "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) },
{ "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) },
{ "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) },
{ "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) },
};
static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.reg_map = reg_map,
.channel_stride = 0x60,
@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
p.errata = configure_dma_errata();
if (!of_have_populated_dt()) {
if (soc_is_omap24xx()) {
p.slave_map = omap24xx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map);
} else if (soc_is_omap34xx() || soc_is_omap3630()) {
p.slave_map = omap3xxx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map);
} else {
pr_err("%s: The legacy DMA map is not provided!\n",
__func__);
return -ENODEV;
}
}
pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",

View File

@ -1020,9 +1020,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
NULL,
};
static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__rtc,
NULL,
};
int __init am43xx_hwmod_init(void)
{
int ret;
omap_hwmod_am43xx_reg();
omap_hwmod_init();
return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
if (!ret && of_machine_is_compatible("ti,am4372"))
ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs);
return ret;
}

View File

@ -429,6 +429,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = {
.dev_attr = &dma_dev_attr,
};
/*
* 'tpcc' class
*
*/
static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = {
.name = "tpcc",
};
static struct omap_hwmod dra7xx_tpcc_hwmod = {
.name = "tpcc",
.class = &dra7xx_tpcc_hwmod_class,
.clkdm_name = "l3main1_clkdm",
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET,
},
},
};
/*
* 'tptc' class
*
*/
static struct omap_hwmod_class dra7xx_tptc_hwmod_class = {
.name = "tptc",
};
/* tptc0 */
static struct omap_hwmod dra7xx_tptc0_hwmod = {
.name = "tptc0",
.class = &dra7xx_tptc_hwmod_class,
.clkdm_name = "l3main1_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET,
.modulemode = MODULEMODE_HWCTRL,
},
},
};
/* tptc1 */
static struct omap_hwmod dra7xx_tptc1_hwmod = {
.name = "tptc1",
.class = &dra7xx_tptc_hwmod_class,
.clkdm_name = "l3main1_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET,
.context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET,
.modulemode = MODULEMODE_HWCTRL,
},
},
};
/*
* 'dss' class
*
@ -1526,8 +1587,31 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
*
*/
/*
* As noted in documentation for _reset() in omap_hwmod.c, the stock reset
* functionality of OMAP HWMOD layer does not deassert the hardreset lines
* associated with an IP automatically leaving the driver to handle that
* by itself. This does not work for PCIeSS which needs the reset lines
* deasserted for the driver to start accessing registers.
*
* We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
* lines after asserting them.
*/
static int dra7xx_pciess_reset(struct omap_hwmod *oh)
{
int i;
for (i = 0; i < oh->rst_lines_cnt; i++) {
omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
}
return 0;
}
static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
.name = "pcie",
.reset = dra7xx_pciess_reset,
};
/* pcie1 */
@ -2563,6 +2647,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> tpcc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_tpcc_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU,
};
/* l3_main_1 -> tptc0 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_tptc0_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU,
};
/* l3_main_1 -> tptc1 */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_tptc1_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
{
.name = "family",
@ -3380,6 +3488,9 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l3_main_1__mcasp3,
&dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__tpcc,
&dra7xx_l3_main_1__tptc0,
&dra7xx_l3_main_1__tptc1,
&dra7xx_l3_main_1__dss,
&dra7xx_l3_main_1__dispc,
&dra7xx_l3_main_1__hdmi,

View File

@ -228,6 +228,42 @@ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = {
.user = OCP_USER_MPU,
};
/* RTC */
static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = {
.rev_offs = 0x74,
.sysc_offs = 0x78,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = SIDLE_FORCE | SIDLE_NO |
SIDLE_SMART | SIDLE_SMART_WKUP,
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class ti81xx_rtc_hwmod_class = {
.name = "rtc",
.sysc = &ti81xx_rtc_sysc,
};
struct omap_hwmod ti81xx_rtc_hwmod = {
.name = "rtc",
.class = &ti81xx_rtc_hwmod_class,
.clkdm_name = "alwon_l3s_clkdm",
.flags = HWMOD_NO_IDLEST,
.main_clk = "sysclk18_ck",
.prcm = {
.omap4 = {
.clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL,
.modulemode = MODULEMODE_SWCTRL,
},
},
};
static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &ti81xx_rtc_hwmod,
.clk = "sysclk6_ck",
.user = OCP_USER_MPU,
};
/* UART common */
static struct omap_hwmod_class_sysconfig uart_sysc = {
.rev_offs = 0x50,
@ -1381,6 +1417,7 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_ls__mcspi1,
&dm814x_l4_ls__mmc1,
&dm814x_l4_ls__mmc2,
&ti81xx_l4_ls__rtc,
&dm81xx_alwon_l3_fast__tpcc,
&dm81xx_alwon_l3_fast__tptc0,
&dm81xx_alwon_l3_fast__tptc1,
@ -1420,6 +1457,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_ls__gpio1,
&dm81xx_l4_ls__gpio2,
&dm81xx_l4_ls__elm,
&ti81xx_l4_ls__rtc,
&dm816x_l4_ls__mmc1,
&dm816x_l4_ls__timer1,
&dm816x_l4_ls__timer2,

View File

@ -181,6 +181,14 @@ static inline int is_ti ##class (void) \
return (GET_TI_CLASS == (id)) ? 1 : 0; \
}
#define GET_DRA_CLASS ((omap_rev() >> 24) & 0xff)
#define IS_DRA_CLASS(class, id) \
static inline int is_dra ##class (void) \
{ \
return (GET_DRA_CLASS == (id)) ? 1 : 0; \
}
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
@ -201,6 +209,12 @@ static inline int is_am ##subclass (void) \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
#define IS_DRA_SUBCLASS(subclass, id) \
static inline int is_dra ##subclass (void) \
{ \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
@ -210,6 +224,7 @@ IS_AM_CLASS(33xx, 0x33)
IS_AM_CLASS(43xx, 0x43)
IS_TI_CLASS(81xx, 0x81)
IS_DRA_CLASS(7xx, 0x7)
IS_OMAP_SUBCLASS(242x, 0x242)
IS_OMAP_SUBCLASS(243x, 0x243)
@ -224,6 +239,8 @@ IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
IS_AM_SUBCLASS(335x, 0x335)
IS_AM_SUBCLASS(437x, 0x437)
IS_DRA_SUBCLASS(75x, 0x75)
IS_DRA_SUBCLASS(72x, 0x72)
#define soc_is_omap24xx() 0
#define soc_is_omap242x() 0
@ -397,9 +414,9 @@ IS_OMAP_TYPE(3430, 0x3430)
#undef soc_is_dra7xx
#undef soc_is_dra74x
#undef soc_is_dra72x
#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7"))
#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74"))
#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72"))
#define soc_is_dra7xx() is_dra7xx()
#define soc_is_dra74x() is_dra75x()
#define soc_is_dra72x() is_dra72x()
#endif
/* Various silicon revisions for omap2 */

View File

@ -297,7 +297,6 @@ config MACH_MAGICIAN
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select GPIO_SYSFS
select IWMMXT
select PXA27x
help
@ -529,7 +528,7 @@ config MACH_TOSA
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
depends on MACH_TOSA && NET
select RFKILL
help
This is a simple driver that is able to control

View File

@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
static struct mmp_dma_platdata pxa_dma_pdata = {
.dma_channels = 0,
.nb_requestors = 0,
};
static struct resource pxa_dma_resource[] = {
@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = {
.resource = pxa_dma_resource,
};
void __init pxa2xx_set_dmac_info(int nb_channels)
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
{
pxa_dma_pdata.dma_channels = nb_channels;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);

View File

@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = {
.gpio_pullup_inverted = 1
};
static struct platform_device e7xx_gpio_vbus = {
static struct platform_device e7xx_gpio_vbus __maybe_unused = {
.name = "gpio-vbus",
.id = -1,
.dev = {
@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = {
};
/* Some e-series hardware cannot control the 32K clock */
static void __init eseries_register_clks(void)
static void __init __maybe_unused eseries_register_clks(void)
{
clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
}

View File

@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void)
{
int timeout = 500;
if (!(OSCC & OSCC_OOK))
if (!(readl(OSCC) & OSCC_OOK))
pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
else
return;
OSCC |= OSCC_OON;
writel(readl(OSCC) | OSCC_OON, OSCC);
do {
if (OSCC & OSCC_OOK)
if (readl(OSCC) & OSCC_OOK)
break;
udelay(1);
} while (--timeout);

View File

@ -134,10 +134,10 @@
/*
* PXA2xx specific Core clock definitions
*/
#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
#define CKEN __REG(0x41300004) /* Clock Enable Register */
#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */
#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */
#define CKEN io_p2v(0x41300004) /* Clock Enable Register */
#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */
#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */

View File

@ -18,7 +18,7 @@
/*
* Oscillator Configuration Register (OSCC)
*/
#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */
#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */
#define OSCC_PEN (1 << 11) /* 13MHz POUT */

View File

@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
extern void pxa_pm_finish(void);
extern const char pm_enter_standby_start[], pm_enter_standby_end[];
extern int pxa3xx_finish_suspend(unsigned long);
/* NOTE: this is for PM debugging on Lubbock, it's really a big
* ugly, but let's keep the crap minimum here, instead of direct
* accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c

View File

@ -19,42 +19,18 @@
#include "generic.h"
#ifdef CONFIG_PXA3xx
static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL),
OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL),
OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL),
OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL),
OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL),
OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL),
{}
};
static void __init pxa3xx_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
pxa3xx_auxdata_lookup, NULL);
}
static const char *const pxa3xx_dt_board_compat[] __initconst = {
"marvell,pxa300",
"marvell,pxa310",
"marvell,pxa320",
NULL,
};
#endif
#ifdef CONFIG_PXA3xx
DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_dt_init_irq,
.handle_irq = pxa3xx_handle_irq,
.init_time = pxa_timer_init,
.restart = pxa_restart,
.init_machine = pxa3xx_dt_init,
.dt_compat = pxa3xx_dt_board_compat,
MACHINE_END
#endif

View File

@ -206,7 +206,7 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
pxa2xx_set_dmac_info(16);
pxa2xx_set_dmac_info(16, 40);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));

View File

@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
#ifndef CONFIG_IWMMXT
u64 acc0;
asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
asm volatile(".arch_extension xscale\n\t"
"mra %Q0, %R0, acc0" : "=r" (acc0));
#endif
/* ensure voltage-change sequencer not initiated, which hangs */
@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
cpu_suspend(pwrmode, pxa27x_finish_suspend);
#ifndef CONFIG_IWMMXT
asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
asm volatile(".arch_extension xscale\n\t"
"mar acc0, %Q0, %R0" : "=r" (acc0));
#endif
break;
}
@ -309,7 +311,7 @@ static int __init pxa27x_init(void)
if (!of_have_populated_dt()) {
pxa_register_device(&pxa27x_device_gpio,
&pxa27x_gpio_info);
pxa2xx_set_dmac_info(32);
pxa2xx_set_dmac_info(32, 75);
ret = platform_add_devices(devices,
ARRAY_SIZE(devices));
}

View File

@ -68,7 +68,6 @@ static unsigned long wakeup_src;
*/
static void pxa3xx_cpu_standby(unsigned int pwrmode)
{
extern const char pm_enter_standby_start[], pm_enter_standby_end[];
void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
memcpy_toio(sram + 0x8000, pm_enter_standby_start,
@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void)
#ifndef CONFIG_IWMMXT
u64 acc0;
asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
asm volatile(".arch_extension xscale\n\t"
"mra %Q0, %R0, acc0" : "=r" (acc0));
#endif
extern int pxa3xx_finish_suspend(unsigned long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void)
AD3ER = 0;
#ifndef CONFIG_IWMMXT
asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
asm volatile(".arch_extension xscale\n\t"
"mar acc0, %Q0, %R0" : "=r" (acc0));
#endif
}
@ -450,7 +449,7 @@ static int __init pxa3xx_init(void)
if (of_have_populated_dt())
return 0;
pxa2xx_set_dmac_info(32);
pxa2xx_set_dmac_info(32, 100);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
return ret;

View File

@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void)
}
/* Power control is shared with between one of the CF slots and SD */
static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
{
unsigned short cpr;
unsigned long flags;

View File

@ -910,7 +910,7 @@ static void __init zeus_map_io(void)
PMCR = PSPR = 0;
/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
OSCC |= OSCC_OON;
writel(readl(OSCC) | OSCC_OON, OSCC);
/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
* float chip selects and PCMCIA */

View File

@ -190,7 +190,7 @@ DECLARE_IO(int,l,"")
result; \
})
#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))

View File

@ -14,13 +14,6 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
/*
* S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
* So need to define it, and here is to avoid redefinition warning.
*/
#define S3C_UART_OFFSET (0x4000)
#include <plat/map-s3c.h>
/*
@ -34,9 +27,6 @@
#define S3C2410_PA_MEMCTRL (0x48000000)
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* UARTs */
#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
/* Timers */
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
@ -157,7 +147,6 @@
#define S3C_PA_FB S3C2443_PA_FB
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0
#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC

View File

@ -3,7 +3,8 @@
#
# Licensed under GPLv2
menuconfig ARCH_S3C64XX
bool "Samsung S3C64XX" if ARCH_MULTI_V6
bool "Samsung S3C64XX"
depends on ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC

View File

@ -6,28 +6,30 @@ config ARCH_SHMOBILE_MULTI
config PM_RCAR
bool
select PM_GENERIC_DOMAINS if PM
select PM
select PM_GENERIC_DOMAINS
config PM_RMOBILE
bool
select PM
select PM_GENERIC_DOMAINS
config ARCH_RCAR_GEN1
bool
select PM_RCAR if PM || SMP
select PM_RCAR
select RENESAS_INTC_IRQPIN
select SYS_SUPPORTS_SH_TMU
config ARCH_RCAR_GEN2
bool
select PM_RCAR if PM || SMP
select PM_RCAR
select RENESAS_IRQC
select SYS_SUPPORTS_SH_CMT
select PCI_DOMAINS if PCI
config ARCH_RMOBILE
bool
select PM_RMOBILE if PM
select PM_RMOBILE
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@ -55,7 +57,8 @@ config ARCH_EMEV2
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select PM_GENERIC_DOMAINS if PM
select PM
select PM_GENERIC_DOMAINS
select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A73A4

View File

@ -0,0 +1,6 @@
#ifndef __ASM_EMEV2_H__
#define __ASM_EMEV2_H__
extern const struct smp_operations emev2_smp_ops;
#endif /* __ASM_EMEV2_H__ */

View File

@ -18,35 +18,17 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
/* 2M mapping for SCU + L2 controller */
{
.virtual = 0xf0000000,
.pfn = __phys_to_pfn(0x1e000000),
.length = SZ_2M,
.type = MT_DEVICE
},
#endif
};
static void __init emev2_map_io(void)
{
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
#include "emev2.h"
static const char *const emev2_boards_compat_dt[] __initconst = {
"renesas,emev2",
NULL,
};
extern const struct smp_operations emev2_smp_ops;
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = shmobile_init_delay,
.init_late = shmobile_init_late,
.dt_compat = emev2_boards_compat_dt,

View File

@ -23,41 +23,9 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
static struct map_desc r8a7740_io_desc[] __initdata = {
/*
* for CPGA/INTC/PFC
* 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
*/
{
.virtual = 0xe6000000,
.pfn = __phys_to_pfn(0xe6000000),
.length = 160 << 20,
.type = MT_DEVICE_NONSHARED
},
#ifdef CONFIG_CACHE_L2X0
/*
* for l2x0_init()
* 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
*/
{
.virtual = 0xf0002000,
.pfn = __phys_to_pfn(0xf0100000),
.length = PAGE_SIZE,
.type = MT_DEVICE_NONSHARED
},
#endif
};
static void __init r8a7740_map_io(void)
{
debug_ll_io_init();
iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
}
/*
* r8a7740 chip has lasting errata on MERAM buffer.
* this is work-around for it.
@ -110,10 +78,6 @@ static void __init r8a7740_generic_init(void)
{
r8a7740_meram_workaround();
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@ -123,7 +87,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.map_io = r8a7740_map_io,
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
.init_machine = r8a7740_generic_init,

View File

@ -21,7 +21,9 @@
#include <linux/delay.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include "common.h"
#include "emev2.h"
#define EMEV2_SCU_BASE 0x1e000000
#define EMEV2_SMU_BASE 0xe0110000

View File

@ -10,6 +10,7 @@
static const char *const stm32_compat[] __initconst = {
"st,stm32f429",
"st,stm32f469",
NULL
};

View File

@ -69,6 +69,7 @@ MACHINE_END
static const char * const sun8i_board_dt_compat[] = {
"allwinner,sun8i-a23",
"allwinner,sun8i-a33",
"allwinner,sun8i-a83t",
"allwinner,sun8i-h3",
NULL,
};

View File

@ -30,7 +30,7 @@
* The secondary CPUs check this register from the boot ROM for the jump
* destination. After that, it can be reused as a scratch register.
*/
#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208
#define UNIPHIER_SMPCTRL_ROM_RSV2 0x208
static void __iomem *uniphier_smp_rom_boot_rsv2;
static unsigned int uniphier_smp_max_cpus;
@ -98,16 +98,24 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
phys_addr_t rom_rsv2_phys;
int ret;
np = of_find_compatible_node(NULL, NULL,
"socionext,uniphier-system-bus-controller");
ret = of_address_to_resource(np, 1, &res);
if (ret) {
pr_err("failed to get resource of system-bus-controller\n");
return ret;
np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
of_node_put(np);
ret = of_address_to_resource(np, 0, &res);
if (!ret) {
rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
} else {
/* try old binding too */
np = of_find_compatible_node(NULL, NULL,
"socionext,uniphier-system-bus-controller");
of_node_put(np);
ret = of_address_to_resource(np, 1, &res);
if (ret) {
pr_err("failed to get resource of SMP control\n");
return ret;
}
rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2;
}
rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2;
ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
if (ret)
return ret;

Some files were not shown because too many files have changed in this diff Show More