[WATCHDOG] Add pnx833x_wdt

Add support for PNX833x watchdog timer.

Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Daniel Laird 2008-11-05 16:46:49 +01:00 committed by Wim Van Sebroeck
parent ad5cf46b4e
commit 33c050c586
3 changed files with 292 additions and 0 deletions

View file

@ -729,6 +729,15 @@ config WDT_MTX1
Hardware driver for the MTX-1 boards. This is a watchdog timer that
will reboot the machine after a 100 seconds timer expired.
config PNX833X_WDT
tristate "PNX833x Hardware Watchdog"
depends on SOC_PNX8335
help
Hardware driver for the PNX833x's watchdog. This is a
watchdog timer that will reboot the machine after a programable
timer has expired and no process has written to /dev/watchdog during
that time.
config WDT_RM9K_GPI
tristate "RM9000/GPI hardware watchdog"
depends on CPU_RM9000

View file

@ -101,6 +101,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o

View file

@ -0,0 +1,282 @@
/*
* PNX833x Hardware Watchdog Driver
* Copyright 2008 NXP Semiconductors
* Daniel Laird <daniel.j.laird@nxp.com>
* Andre McCurdy <andre.mccurdy@nxp.com>
*
* Heavily based upon - IndyDog 0.3
* A Hardware Watchdog Device for SGI IP22
*
* (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* based on softdog.c by Alan Cox <alan@redhat.com>
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <asm/mach-pnx833x/pnx833x.h>
#define PFX "pnx833x: "
#define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */
#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
/** CONFIG block */
#define PNX833X_CONFIG (0x07000U)
#define PNX833X_CONFIG_CPU_WATCHDOG (0x54)
#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58)
#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c)
/** RESET block */
#define PNX833X_RESET (0x08000U)
#define PNX833X_RESET_CONFIG (0x08)
static int pnx833x_wdt_alive;
/* Set default timeout in MHZ.*/
static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY);
module_param(pnx833x_wdt_timeout, int, 0);
MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
__MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds).");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int start_enabled = 1;
module_param(start_enabled, int, 0);
MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
"(default=" __MODULE_STRING(start_enabled) ")");
static void pnx833x_wdt_start(void)
{
/* Enable watchdog causing reset. */
PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1;
/* Set timeout.*/
PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
/* Enable watchdog. */
PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1;
printk(KERN_INFO PFX "Started watchdog timer.\n");
}
static void pnx833x_wdt_stop(void)
{
/* Disable watchdog causing reset. */
PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE;
/* Disable watchdog.*/
PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE;
printk(KERN_INFO PFX "Stopped watchdog timer.\n");
}
static void pnx833x_wdt_ping(void)
{
PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
}
/*
* Allow only one person to hold it open
*/
static int pnx833x_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &pnx833x_wdt_alive))
return -EBUSY;
if (nowayout)
__module_get(THIS_MODULE);
/* Activate timer */
if (!start_enabled)
pnx833x_wdt_start();
pnx833x_wdt_ping();
printk(KERN_INFO "Started watchdog timer.\n");
return nonseekable_open(inode, file);
}
static int pnx833x_wdt_release(struct inode *inode, struct file *file)
{
/* Shut off the timer.
* Lock it in if it's a module and we defined ...NOWAYOUT */
if (!nowayout)
pnx833x_wdt_stop(); /* Turn the WDT off */
clear_bit(0, &pnx833x_wdt_alive);
return 0;
}
static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
{
/* Refresh the timer. */
if (len)
pnx833x_wdt_ping();
return len;
}
static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int options, new_timeout = 0;
uint32_t timeout, timeout_left = 0;
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
.firmware_version = 0,
.identity = "Hardware Watchdog for PNX833x",
};
switch (cmd) {
default:
return -ENOTTY;
case WDIOC_GETSUPPORT:
if (copy_to_user((struct watchdog_info *)arg,
&ident, sizeof(ident)))
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, (int *)arg);
case WDIOC_SETOPTIONS:
if (get_user(options, (int *)arg))
return -EFAULT;
if (options & WDIOS_DISABLECARD)
pnx833x_wdt_stop();
if (options & WDIOS_ENABLECARD)
pnx833x_wdt_start();
return 0;
case WDIOC_KEEPALIVE:
pnx833x_wdt_ping();
return 0;
case WDIOC_SETTIMEOUT:
{
if (get_user(new_timeout, (int *)arg))
return -EFAULT;
pnx833x_wdt_timeout = new_timeout;
PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout;
return put_user(new_timeout, (int *)arg);
}
case WDIOC_GETTIMEOUT:
timeout = PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_WATCHDOG_COMPARE);
return put_user(timeout, (int *)arg);
case WDIOC_GETTIMELEFT:
timeout_left = PNX833X_REG(PNX833X_CONFIG +
PNX833X_CONFIG_CPU_WATCHDOG);
return put_user(timeout_left, (int *)arg);
}
}
static int pnx833x_wdt_notify_sys(struct notifier_block *this,
unsigned long code, void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
pnx833x_wdt_stop(); /* Turn the WDT off */
return NOTIFY_DONE;
}
static const struct file_operations pnx833x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = pnx833x_wdt_write,
.unlocked_ioctl = pnx833x_wdt_ioctl,
.open = pnx833x_wdt_open,
.release = pnx833x_wdt_release,
};
static struct miscdevice pnx833x_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &pnx833x_wdt_fops,
};
static struct notifier_block pnx833x_wdt_notifier = {
.notifier_call = pnx833x_wdt_notify_sys,
};
static char banner[] __initdata =
KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n";
static int __init watchdog_init(void)
{
int ret, cause;
/* Lets check the reason for the reset.*/
cause = PNX833X_REG(PNX833X_RESET);
/*If bit 31 is set then watchdog was cause of reset.*/
if (cause & 0x80000000) {
printk(KERN_INFO PFX "The system was previously reset due to "
"the watchdog firing - please investigate...\n");
}
ret = register_reboot_notifier(&pnx833x_wdt_notifier);
if (ret) {
printk(KERN_ERR PFX
"cannot register reboot notifier (err=%d)\n", ret);
return ret;
}
ret = misc_register(&pnx833x_wdt_miscdev);
if (ret) {
printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
unregister_reboot_notifier(&pnx833x_wdt_notifier);
return ret;
}
printk(banner);
if (start_enabled)
pnx833x_wdt_start();
return 0;
}
static void __exit watchdog_exit(void)
{
misc_deregister(&pnx833x_wdt_miscdev);
unregister_reboot_notifier(&pnx833x_wdt_notifier);
}
module_init(watchdog_init);
module_exit(watchdog_exit);
MODULE_AUTHOR("Daniel Laird/Andre McCurdy");
MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);