diff --git a/Makefile b/Makefile index c7381ed4b690..1571fdfaf154 100644 --- a/Makefile +++ b/Makefile @@ -162,7 +162,7 @@ export srctree objtree VPATH # SUBARCH tells the usermode build what the underlying arch is. That is set # first, and if a usermode build is happening, the "ARCH=um" on the command # line overrides the setting of ARCH below. If a native build is happening, -# then ARCH is assigned, getting whatever value it gets normally, and +# then ARCH is assigned, getting whatever value it gets normally, and # SUBARCH is subsequently ignored. SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ @@ -290,7 +290,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< # # If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. +# If it is set to "quiet_", only the short version will be printed. # If it is set to "silent_", nothing will be printed at all, since # the variable $(silent_cmd_cc_o_c) doesn't exist. # @@ -869,7 +869,7 @@ ifdef CONFIG_BUILD_DOCSRC endif +$(call if_changed,link-vmlinux) -# The actual objects are generated when descending, +# The actual objects are generated when descending, # make sure no implicit rule kicks in $(sort $(vmlinux-deps)): $(vmlinux-dirs) ; @@ -1484,7 +1484,7 @@ endif $(build)=$(build-dir) $(@:.ko=.o) $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost -# FIXME Should go into a make.lib or something +# FIXME Should go into a make.lib or something # =========================================================================== quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index b5e02b669469..bf3e6778cd71 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -281,7 +281,7 @@ $(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) $(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ -cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< +cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< $(obj)/%.s: $(src)/%.S FORCE $(call if_changed_dep,as_s_S) @@ -375,7 +375,7 @@ link_multi_deps = \ $(filter $(addprefix $(obj)/, \ $($(subst $(obj)/,,$(@:.o=-objs))) \ $($(subst $(obj)/,,$(@:.o=-y)))), $^) - + quiet_cmd_link_multi-y = LD $@ cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index 4d908d16c035..2c1d69c4345c 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -18,7 +18,7 @@ include $(srctree)/$(obj)/Makefile include scripts/Makefile.host mod-fw := $(fw-shipped-m) -# If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the +# If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the # firmware for in-kernel drivers too. ifndef CONFIG_FIRMWARE_IN_KERNEL mod-fw += $(fw-shipped-y) diff --git a/scripts/Makefile.host b/scripts/Makefile.host index 1ac414fd5030..0f0d6ba87e42 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -166,5 +166,5 @@ $(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE $(call if_changed,host-cshlib) targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\ - $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) + $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 6a5b0decb797..260bf8acfce9 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -27,7 +27,7 @@ lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) # --------------------------------------------------------------------------- # o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o # and add the directory to the list of dirs to descend into: $(subdir-y) -# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) +# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) # and add the directory to the list of dirs to descend into: $(subdir-m) # Determine modorder. @@ -46,7 +46,7 @@ obj-m := $(filter-out %/, $(obj-m)) subdir-ym := $(sort $(subdir-y) $(subdir-m)) -# if $(foo-objs) exists, foo.o is a composite object +# if $(foo-objs) exists, foo.o is a composite object multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) multi-used := $(multi-used-y) $(multi-used-m) @@ -91,7 +91,7 @@ obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) # These flags are needed for modversions and compiling, so we define them here # already -# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will +# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will # end up in (or would, if it gets compiled in) # Note: Files that end up in two or more modules are compiled without the # KBUILD_MODNAME definition. The reason is that any made-up name would @@ -212,7 +212,7 @@ $(obj)/%: $(src)/%_shipped # Commands useful for building a boot image # =========================================================================== -# +# # Use as following: # # target: source(s) FORCE @@ -226,7 +226,7 @@ $(obj)/%: $(src)/%_shipped quiet_cmd_ld = LD $@ cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \ - $(filter-out FORCE,$^) -o $@ + $(filter-out FORCE,$^) -o $@ # Objcopy # --------------------------------------------------------------------------- diff --git a/scripts/conmakehash.c b/scripts/conmakehash.c index 263a44d57fa9..61bbda54cf13 100644 --- a/scripts/conmakehash.c +++ b/scripts/conmakehash.c @@ -104,7 +104,7 @@ int main(int argc, char *argv[]) } } - /* For now we assume the default font is always 256 characters. */ + /* For now we assume the default font is always 256 characters. */ fontlen = 256; /* Initialize table */ @@ -236,15 +236,15 @@ int main(int argc, char *argv[]) } /* Okay, we hit EOF, now output hash table */ - + fclose(ctbl); - + /* Compute total size of Unicode list */ nuni = 0; for ( i = 0 ; i < fontlen ; i++ ) nuni += unicount[i]; - + printf("\ /*\n\ * Do not edit this file; it was automatically generated by\n\ @@ -268,9 +268,9 @@ u8 dfont_unicount[%d] = \n\ else printf(", "); } - + printf("\nu16 dfont_unitable[%d] = \n{\n\t", nuni); - + fp0 = 0; nent = 0; for ( i = 0 ; i < nuni ; i++ ) diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 31331723e810..9cb8522d8d22 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -589,7 +589,7 @@ while ($repeat) { # Now we need to see if we have to check selects; loop_select; -} +} my %setconfigs; diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h index cfb8440cc0b2..6fdc97ef6023 100755 --- a/scripts/mkcompile_h +++ b/scripts/mkcompile_h @@ -68,7 +68,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN" ( echo /\* This file is auto generated, version $VERSION \*/ if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi - + echo \#define UTS_MACHINE \"$ARCH\" echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\" @@ -84,7 +84,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN" # recompilations. # We don't consider the file changed if only the date/time changed. # A kernel config change will increase the generation number, thus -# causing compile.h to be updated (including date/time) due to the +# causing compile.h to be updated (including date/time) due to the # changed comment in the # first line. diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f46e4dd0558d..b151b63f9be3 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -130,7 +130,7 @@ if [ "$ARCH" = "um" ] ; then cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map" cp $KCONFIG_CONFIG "$tmpdir/usr/share/doc/$packagename/config" gzip "$tmpdir/usr/share/doc/$packagename/config" -else +else cp System.map "$tmpdir/boot/System.map-$version" cp $KCONFIG_CONFIG "$tmpdir/boot/config-$version" fi diff --git a/scripts/patch-kernel b/scripts/patch-kernel index d000ea3a41fd..49b4241e814a 100755 --- a/scripts/patch-kernel +++ b/scripts/patch-kernel @@ -27,7 +27,7 @@ # Nick Holloway , 2nd January 1995. # # Added support for handling multiple types of compression. What includes -# gzip, bzip, bzip2, zip, compress, and plaintext. +# gzip, bzip, bzip2, zip, compress, and plaintext. # # Adam Sulmicki , 1st January 1997. # @@ -159,7 +159,7 @@ applyPatch () { fi # Remove backup files find $sourcedir/ '(' -name '*.orig' -o -name '.*.orig' ')' -exec rm -f {} \; - + return 0; }