From 38ea3686f6d1110a3787dfd7c5cf7bad1926818b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sat, 23 Feb 2008 19:48:57 -0800 Subject: [PATCH] [BNX2]: Disable parallel detect on an HP blade. Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 14 +++++++++++++- drivers/net/bnx2.h | 1 + 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 2fa258050968..35356fba5a71 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5362,11 +5362,15 @@ bnx2_test_intr(struct bnx2 *bp) return -ENODEV; } +/* Determining link for parallel detection. */ static int bnx2_5706_serdes_has_link(struct bnx2 *bp) { u32 mode_ctl, an_dbg, exp; + if (bp->phy_flags & BNX2_PHY_FLAG_NO_PARALLEL) + return 0; + bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_MODE_CTL); bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &mode_ctl); @@ -7328,7 +7332,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->flags |= BNX2_FLAG_NO_WOL; bp->wol = 0; } - if (CHIP_NUM(bp) != CHIP_NUM_5706) { + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + /* Don't do parallel detect on this board because of + * some board problems. The link will not go down + * if we do parallel detect. + */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP && + pdev->subsystem_device == 0x310c) + bp->phy_flags |= BNX2_PHY_FLAG_NO_PARALLEL; + } else { bp->phy_addr = 2; if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G) bp->phy_flags |= BNX2_PHY_FLAG_2_5G_CAPABLE; diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 3aa0364942e2..1eaf5bb3d9c2 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6673,6 +6673,7 @@ struct bnx2 { #define BNX2_PHY_FLAG_DIS_EARLY_DAC 0x00000400 #define BNX2_PHY_FLAG_REMOTE_PHY_CAP 0x00000800 #define BNX2_PHY_FLAG_FORCED_DOWN 0x00001000 +#define BNX2_PHY_FLAG_NO_PARALLEL 0x00002000 u32 mii_bmcr; u32 mii_bmsr;