Merge branches 'for-32/i2c/nomadik', 'for-32/i2c/s3c2410-dt' and 'for-32/i2c/tegra-iomem' into for-linus/i2c-3.2
This commit is contained in:
commit
3945fe9314
39
Documentation/devicetree/bindings/i2c/samsung-i2c.txt
Normal file
39
Documentation/devicetree/bindings/i2c/samsung-i2c.txt
Normal file
|
@ -0,0 +1,39 @@
|
|||
* Samsung's I2C controller
|
||||
|
||||
The Samsung's I2C controller is used to interface with I2C devices.
|
||||
|
||||
Required properties:
|
||||
- compatible: value should be either of the following.
|
||||
(a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
|
||||
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- interrupts: interrupt number to the cpu.
|
||||
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
|
||||
- gpios: The order of the gpios should be the following: <SDA, SCL>.
|
||||
The gpio specifier depends on the gpio controller.
|
||||
|
||||
Optional properties:
|
||||
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
|
||||
specified, default value is 0.
|
||||
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
|
||||
specified, the default value in Hz is 100000.
|
||||
|
||||
Example:
|
||||
|
||||
i2c@13870000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13870000 0x100>;
|
||||
interrupts = <345>;
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-max-bus-freq = <100000>;
|
||||
gpios = <&gpd1 2 0 /* SDA */
|
||||
&gpd1 3 0 /* SCL */>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wm8994@1a {
|
||||
compatible = "wlf,wm8994";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
|
@ -63,11 +63,11 @@
|
|||
/* Master controller (MCR) register */
|
||||
#define I2C_MCR_OP (0x1 << 0) /* Operation */
|
||||
#define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */
|
||||
#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
|
||||
#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
|
||||
#define I2C_MCR_SB (0x1 << 11) /* Extended address */
|
||||
#define I2C_MCR_AM (0x3 << 12) /* Address type */
|
||||
#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
|
||||
#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
|
||||
#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
|
||||
#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
|
||||
|
||||
/* Status register (SR) */
|
||||
#define I2C_SR_OP (0x3 << 0) /* Operation */
|
||||
|
@ -77,7 +77,7 @@
|
|||
#define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */
|
||||
|
||||
/* Interrupt mask set/clear (IMSCR) bits */
|
||||
#define I2C_IT_TXFE (0x1 << 0)
|
||||
#define I2C_IT_TXFE (0x1 << 0)
|
||||
#define I2C_IT_TXFNE (0x1 << 1)
|
||||
#define I2C_IT_TXFF (0x1 << 2)
|
||||
#define I2C_IT_TXFOVR (0x1 << 3)
|
||||
|
@ -135,31 +135,31 @@ struct i2c_nmk_client {
|
|||
};
|
||||
|
||||
/**
|
||||
* struct nmk_i2c_dev - private data structure of the controller
|
||||
* @pdev: parent platform device
|
||||
* @adap: corresponding I2C adapter
|
||||
* @irq: interrupt line for the controller
|
||||
* @virtbase: virtual io memory area
|
||||
* @clk: hardware i2c block clock
|
||||
* @cfg: machine provided controller configuration
|
||||
* @cli: holder of client specific data
|
||||
* @stop: stop condition
|
||||
* @xfer_complete: acknowledge completion for a I2C message
|
||||
* @result: controller propogated result
|
||||
* @regulator: pointer to i2c regulator
|
||||
* @busy: Busy doing transfer
|
||||
* struct nmk_i2c_dev - private data structure of the controller.
|
||||
* @pdev: parent platform device.
|
||||
* @adap: corresponding I2C adapter.
|
||||
* @irq: interrupt line for the controller.
|
||||
* @virtbase: virtual io memory area.
|
||||
* @clk: hardware i2c block clock.
|
||||
* @cfg: machine provided controller configuration.
|
||||
* @cli: holder of client specific data.
|
||||
* @stop: stop condition.
|
||||
* @xfer_complete: acknowledge completion for a I2C message.
|
||||
* @result: controller propogated result.
|
||||
* @regulator: pointer to i2c regulator.
|
||||
* @busy: Busy doing transfer.
|
||||
*/
|
||||
struct nmk_i2c_dev {
|
||||
struct platform_device *pdev;
|
||||
struct i2c_adapter adap;
|
||||
int irq;
|
||||
struct i2c_adapter adap;
|
||||
int irq;
|
||||
void __iomem *virtbase;
|
||||
struct clk *clk;
|
||||
struct nmk_i2c_controller cfg;
|
||||
struct i2c_nmk_client cli;
|
||||
int stop;
|
||||
int stop;
|
||||
struct completion xfer_complete;
|
||||
int result;
|
||||
int result;
|
||||
struct regulator *regulator;
|
||||
bool busy;
|
||||
};
|
||||
|
@ -217,8 +217,9 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
|
|||
}
|
||||
}
|
||||
|
||||
dev_err(&dev->pdev->dev, "flushing operation timed out "
|
||||
"giving up after %d attempts", LOOP_ATTEMPTS);
|
||||
dev_err(&dev->pdev->dev,
|
||||
"flushing operation timed out giving up after %d attempts",
|
||||
LOOP_ATTEMPTS);
|
||||
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
@ -270,7 +271,7 @@ exit:
|
|||
}
|
||||
|
||||
/* enable peripheral, master mode operation */
|
||||
#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
|
||||
#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
|
||||
|
||||
/**
|
||||
* load_i2c_mcr_reg() - load the MCR register
|
||||
|
@ -363,8 +364,8 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
|
|||
* and high speed (up to 3.4 Mb/s)
|
||||
*/
|
||||
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
|
||||
dev_err(&dev->pdev->dev, "do not support this mode "
|
||||
"defaulting to std. mode\n");
|
||||
dev_err(&dev->pdev->dev,
|
||||
"do not support this mode defaulting to std. mode\n");
|
||||
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
|
||||
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
|
||||
writel(I2C_FREQ_MODE_STANDARD << 4,
|
||||
|
@ -423,7 +424,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
|
|||
|
||||
if (timeout < 0) {
|
||||
dev_err(&dev->pdev->dev,
|
||||
"wait_for_completion_timeout"
|
||||
"wait_for_completion_timeout "
|
||||
"returned %d waiting for event\n", timeout);
|
||||
status = timeout;
|
||||
}
|
||||
|
@ -556,8 +557,8 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
|
|||
if (((i2c_sr >> 2) & 0x3) == 0x3) {
|
||||
/* get the abort cause */
|
||||
cause = (i2c_sr >> 4) & 0x7;
|
||||
dev_err(&dev->pdev->dev, "%s\n", cause
|
||||
>= ARRAY_SIZE(abort_causes) ?
|
||||
dev_err(&dev->pdev->dev, "%s\n",
|
||||
cause >= ARRAY_SIZE(abort_causes) ?
|
||||
"unknown reason" :
|
||||
abort_causes[cause]);
|
||||
}
|
||||
|
@ -582,13 +583,13 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
|
|||
*
|
||||
* NOTE:
|
||||
* READ TRANSFER : We impose a restriction of the first message to be the
|
||||
* index message for any read transaction.
|
||||
* - a no index is coded as '0',
|
||||
* - 2byte big endian index is coded as '3'
|
||||
* !!! msg[0].buf holds the actual index.
|
||||
* This is compatible with generic messages of smbus emulator
|
||||
* that send a one byte index.
|
||||
* eg. a I2C transation to read 2 bytes from index 0
|
||||
* index message for any read transaction.
|
||||
* - a no index is coded as '0',
|
||||
* - 2byte big endian index is coded as '3'
|
||||
* !!! msg[0].buf holds the actual index.
|
||||
* This is compatible with generic messages of smbus emulator
|
||||
* that send a one byte index.
|
||||
* eg. a I2C transation to read 2 bytes from index 0
|
||||
* idx = 0;
|
||||
* msg[0].addr = client->addr;
|
||||
* msg[0].flags = 0x0;
|
||||
|
@ -644,8 +645,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|||
|
||||
for (i = 0; i < num_msgs; i++) {
|
||||
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
|
||||
dev_err(&dev->pdev->dev, "10 bit addressing"
|
||||
"not supported\n");
|
||||
dev_err(&dev->pdev->dev,
|
||||
"10 bit addressing not supported\n");
|
||||
|
||||
status = -EINVAL;
|
||||
goto out;
|
||||
|
@ -789,8 +790,9 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
|
|||
|
||||
if (dev->cli.count) {
|
||||
dev->result = -EIO;
|
||||
dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
|
||||
"xfered\n", dev->cli.count);
|
||||
dev_err(&dev->pdev->dev,
|
||||
"%lu bytes still remain to be xfered\n",
|
||||
dev->cli.count);
|
||||
(void) init_hw(dev);
|
||||
}
|
||||
complete(&dev->xfer_complete);
|
||||
|
@ -923,7 +925,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
if (request_mem_region(res->start, resource_size(res),
|
||||
DRIVER_NAME "I/O region") == NULL) {
|
||||
DRIVER_NAME "I/O region") == NULL) {
|
||||
ret = -EBUSY;
|
||||
goto err_no_region;
|
||||
}
|
||||
|
@ -980,8 +982,9 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
|
|||
|
||||
i2c_set_adapdata(adap, dev);
|
||||
|
||||
dev_info(&pdev->dev, "initialize %s on virtual "
|
||||
"base %p\n", adap->name, dev->virtbase);
|
||||
dev_info(&pdev->dev,
|
||||
"initialize %s on virtual base %p\n",
|
||||
adap->name, dev->virtbase);
|
||||
|
||||
ret = i2c_add_numbered_adapter(adap);
|
||||
if (ret) {
|
||||
|
|
|
@ -35,6 +35,8 @@
|
|||
#include <linux/cpufreq.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of_i2c.h>
|
||||
#include <linux/of_gpio.h>
|
||||
|
||||
#include <asm/irq.h>
|
||||
|
||||
|
@ -78,6 +80,8 @@ struct s3c24xx_i2c {
|
|||
struct resource *ioarea;
|
||||
struct i2c_adapter adap;
|
||||
|
||||
struct s3c2410_platform_i2c *pdata;
|
||||
int gpios[2];
|
||||
#ifdef CONFIG_CPU_FREQ
|
||||
struct notifier_block freq_transition;
|
||||
#endif
|
||||
|
@ -95,6 +99,12 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
|
|||
struct platform_device *pdev = to_platform_device(i2c->dev);
|
||||
enum s3c24xx_i2c_type type;
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
if (i2c->dev->of_node)
|
||||
return of_device_is_compatible(i2c->dev->of_node,
|
||||
"samsung,s3c2440-i2c");
|
||||
#endif
|
||||
|
||||
type = platform_get_device_id(pdev)->driver_data;
|
||||
return type == TYPE_S3C2440;
|
||||
}
|
||||
|
@ -625,7 +635,7 @@ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
|
|||
|
||||
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
|
||||
{
|
||||
struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
|
||||
struct s3c2410_platform_i2c *pdata = i2c->pdata;
|
||||
unsigned long clkin = clk_get_rate(i2c->clk);
|
||||
unsigned int divs, div1;
|
||||
unsigned long target_frequency;
|
||||
|
@ -741,6 +751,49 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
int idx, gpio, ret;
|
||||
|
||||
for (idx = 0; idx < 2; idx++) {
|
||||
gpio = of_get_gpio(i2c->dev->of_node, idx);
|
||||
if (!gpio_is_valid(gpio)) {
|
||||
dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
|
||||
goto free_gpio;
|
||||
}
|
||||
|
||||
ret = gpio_request(gpio, "i2c-bus");
|
||||
if (ret) {
|
||||
dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
|
||||
goto free_gpio;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
|
||||
free_gpio:
|
||||
while (--idx >= 0)
|
||||
gpio_free(i2c->gpios[idx]);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
unsigned int idx;
|
||||
for (idx = 0; idx < 2; idx++)
|
||||
gpio_free(i2c->gpios[idx]);
|
||||
}
|
||||
#else
|
||||
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
/* s3c24xx_i2c_init
|
||||
*
|
||||
* initialise the controller, set the IO lines and frequency
|
||||
|
@ -754,12 +807,15 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|||
|
||||
/* get the plafrom data */
|
||||
|
||||
pdata = i2c->dev->platform_data;
|
||||
pdata = i2c->pdata;
|
||||
|
||||
/* inititalise the gpio */
|
||||
|
||||
if (pdata->cfg_gpio)
|
||||
pdata->cfg_gpio(to_platform_device(i2c->dev));
|
||||
else
|
||||
if (s3c24xx_i2c_parse_dt_gpio(i2c))
|
||||
return -EINVAL;
|
||||
|
||||
/* write slave address */
|
||||
|
||||
|
@ -785,6 +841,34 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
/* s3c24xx_i2c_parse_dt
|
||||
*
|
||||
* Parse the device tree node and retreive the platform data.
|
||||
*/
|
||||
|
||||
static void
|
||||
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
struct s3c2410_platform_i2c *pdata = i2c->pdata;
|
||||
|
||||
if (!np)
|
||||
return;
|
||||
|
||||
pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
|
||||
of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
|
||||
of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
|
||||
of_property_read_u32(np, "samsung,i2c-max-bus-freq",
|
||||
(u32 *)&pdata->frequency);
|
||||
}
|
||||
#else
|
||||
static void
|
||||
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
|
||||
{
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* s3c24xx_i2c_probe
|
||||
*
|
||||
* called by the bus driver when a suitable device is found
|
||||
|
@ -793,14 +877,16 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|||
static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct s3c24xx_i2c *i2c;
|
||||
struct s3c2410_platform_i2c *pdata;
|
||||
struct s3c2410_platform_i2c *pdata = NULL;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "no platform data\n");
|
||||
return -EINVAL;
|
||||
if (!pdev->dev.of_node) {
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "no platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
|
||||
|
@ -809,6 +895,17 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|||
return -ENOMEM;
|
||||
}
|
||||
|
||||
i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!i2c->pdata) {
|
||||
ret = -ENOMEM;
|
||||
goto err_noclk;
|
||||
}
|
||||
|
||||
if (pdata)
|
||||
memcpy(i2c->pdata, pdata, sizeof(*pdata));
|
||||
else
|
||||
s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
|
||||
|
||||
strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
|
||||
i2c->adap.owner = THIS_MODULE;
|
||||
i2c->adap.algo = &s3c24xx_i2c_algorithm;
|
||||
|
@ -903,7 +1000,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|||
* being bus 0.
|
||||
*/
|
||||
|
||||
i2c->adap.nr = pdata->bus_num;
|
||||
i2c->adap.nr = i2c->pdata->bus_num;
|
||||
i2c->adap.dev.of_node = pdev->dev.of_node;
|
||||
|
||||
ret = i2c_add_numbered_adapter(&i2c->adap);
|
||||
if (ret < 0) {
|
||||
|
@ -911,6 +1009,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|||
goto err_cpufreq;
|
||||
}
|
||||
|
||||
of_i2c_register_devices(&i2c->adap);
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
|
||||
|
@ -959,6 +1058,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
|
|||
iounmap(i2c->regs);
|
||||
|
||||
release_resource(i2c->ioarea);
|
||||
s3c24xx_i2c_dt_gpio_free(i2c);
|
||||
kfree(i2c->ioarea);
|
||||
kfree(i2c);
|
||||
|
||||
|
@ -1012,6 +1112,17 @@ static struct platform_device_id s3c24xx_driver_ids[] = {
|
|||
};
|
||||
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id s3c24xx_i2c_match[] = {
|
||||
{ .compatible = "samsung,s3c2410-i2c" },
|
||||
{ .compatible = "samsung,s3c2440-i2c" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
|
||||
#else
|
||||
#define s3c24xx_i2c_match NULL
|
||||
#endif
|
||||
|
||||
static struct platform_driver s3c24xx_i2c_driver = {
|
||||
.probe = s3c24xx_i2c_probe,
|
||||
.remove = s3c24xx_i2c_remove,
|
||||
|
@ -1020,6 +1131,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
|
|||
.owner = THIS_MODULE,
|
||||
.name = "s3c-i2c",
|
||||
.pm = S3C24XX_DEV_PM_OPS,
|
||||
.of_match_table = s3c24xx_i2c_match,
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
@ -566,7 +566,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
|
|||
struct clk *clk;
|
||||
struct clk *i2c_clk;
|
||||
const unsigned int *prop;
|
||||
void *base;
|
||||
void __iomem *base;
|
||||
int irq;
|
||||
int ret = 0;
|
||||
|
||||
|
|
Loading…
Reference in a new issue