redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()

Browse source 
To allow future support of multiple page reading/writing, move the data
buffer clean out of prepare_set_command().

This is done to prevent the data buffer from being cleaned on every command
preparation, when a multiple command sequence is implemented to read/write
pages larger than the FIFO size (2 KiB).

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
Ezequiel Garcia 2013-11-14 18:25:34 -03:00 committed by Brian Norris
parent c39ff03a40
commit 39f83d15df
1 changed files with 16 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
drivers/mtd/nand/pxa3xx_nand.c
View file

@ -605,6 +605,9 @@ static void set_command_address(struct pxa3xx_nand_info *info,
static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
{
struct pxa3xx_nand_host *host = info->host[info->cs];
struct mtd_info *mtd = host->mtd;
/* reset data and oob column point to handle data */
info->buf_start = 0;
info->buf_count = 0;
@ -629,6 +632,19 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
info->ndcb2 = 0;
break;
}
/*
* If we are about to issue a read command, or about to set
* the write address, then clean the data buffer.
*/
if (command == NAND_CMD_READ0 ||
command == NAND_CMD_READOOB ||
command == NAND_CMD_SEQIN) {
info->buf_count = mtd->writesize + mtd->oobsize;
memset(info->data_buff, 0xFF, info->buf_count);
}
}
static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
@ -670,16 +686,11 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
set_command_address(info, mtd->writesize, column, page_addr);
info->buf_count = mtd->writesize + mtd->oobsize;
memset(info->data_buff, 0xFF, info->buf_count);
break;
case NAND_CMD_SEQIN:
set_command_address(info, mtd->writesize, column, page_addr);
info->buf_count = mtd->writesize + mtd->oobsize;
memset(info->data_buff, 0xFF, info->buf_count);
break;
case NAND_CMD_PAGEPROG: