ARM: i.MX remove last leftovers from legacy clock support

This also removes mach/clock.h along the way

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
This commit is contained in:
Sascha Hauer 2012-09-11 08:50:00 +02:00
parent a6dd3c812e
commit 3a84d17bb3
9 changed files with 8 additions and 286 deletions

View file

@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o
clk-pfd.o clk-busy.o clk.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o

View file

@ -6,7 +6,7 @@
#include <linux/err.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/clock.h>
#include "clk.h"
/**

3
arch/arm/mach-imx/clk.c Normal file
View file

@ -0,0 +1,3 @@
#include <linux/spinlock.h>
DEFINE_SPINLOCK(imx_ccm_lock);

View file

@ -3,7 +3,8 @@
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
#include <mach/clock.h>
extern spinlock_t imx_ccm_lock;
struct clk *imx_clk_pllv1(const char *name, const char *parent,
void __iomem *base);

View file

@ -36,7 +36,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>

View file

@ -3,7 +3,7 @@
#
# Common support
obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
obj-y := time.o devices.o cpu.o system.o irq-common.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o

View file

@ -1,212 +0,0 @@
/*
* Based on arch/arm/plat-omap/clock.c
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
/* #define DEBUG */
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/semaphore.h>
#include <linux/string.h>
#include <mach/clock.h>
#include <mach/hardware.h>
#ifndef CONFIG_COMMON_CLK
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
/*-------------------------------------------------------------------------
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
static void __clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
WARN_ON(!clk->usecount);
if (!(--clk->usecount)) {
if (clk->disable)
clk->disable(clk);
__clk_disable(clk->parent);
__clk_disable(clk->secondary);
}
}
static int __clk_enable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (clk->usecount++ == 0) {
__clk_enable(clk->parent);
__clk_enable(clk->secondary);
if (clk->enable)
clk->enable(clk);
}
return 0;
}
/* This function increments the reference count on the clock and enables the
* clock if not already enabled. The parent clock tree is recursively enabled
*/
int clk_enable(struct clk *clk)
{
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
ret = __clk_enable(clk);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_enable);
/* This function decrements the reference count on the clock and disables
* the clock when reference count is 0. The parent clock tree is
* recursively disabled
*/
void clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
mutex_lock(&clocks_mutex);
__clk_disable(clk);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_disable);
/* Retrieve the *current* clock rate. If the clock itself
* does not provide a special calculation routine, ask
* its parent and so on, until one is able to return
* a valid clock rate
*/
unsigned long clk_get_rate(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return 0UL;
if (clk->get_rate)
return clk->get_rate(clk);
return clk_get_rate(clk->parent);
}
EXPORT_SYMBOL(clk_get_rate);
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
* This is dependent on the clock's current parent.
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
return 0;
return clk->round_rate(clk, rate);
}
EXPORT_SYMBOL(clk_round_rate);
/* Set the clock to the requested clock rate. The rate must
* match a supported rate exactly based on what clk_round_rate returns
*/
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
return ret;
mutex_lock(&clocks_mutex);
ret = clk->set_rate(clk, rate);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
/* Set the clock's parent to another clock source */
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = -EINVAL;
struct clk *old;
if (clk == NULL || IS_ERR(clk) || parent == NULL ||
IS_ERR(parent) || clk->set_parent == NULL)
return ret;
if (clk->usecount)
clk_enable(parent);
mutex_lock(&clocks_mutex);
ret = clk->set_parent(clk, parent);
if (ret == 0) {
old = clk->parent;
clk->parent = parent;
} else {
old = parent;
}
mutex_unlock(&clocks_mutex);
if (clk->usecount)
clk_disable(old);
return ret;
}
EXPORT_SYMBOL(clk_set_parent);
/* Retrieve the clock's parent clock source */
struct clk *clk_get_parent(struct clk *clk)
{
struct clk *ret = NULL;
if (clk == NULL || IS_ERR(clk))
return ret;
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
#else
/*
* Lock to protect the clock module (ccm) registers. Used
* on all i.MXs
*/
DEFINE_SPINLOCK(imx_ccm_lock);
#endif /* CONFIG_COMMON_CLK */

View file

@ -23,7 +23,6 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/clock.h>
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)

View file

@ -1,68 +0,0 @@
/*
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_CLOCK_H__
#define __ASM_ARCH_MXC_CLOCK_H__
#ifndef __ASSEMBLY__
#include <linux/list.h>
#ifndef CONFIG_COMMON_CLK
struct module;
struct clk {
int id;
/* Source clock this clk depends on */
struct clk *parent;
/* Secondary clock to enable/disable with this clock */
struct clk *secondary;
/* Reference count of clock enable/disable */
__s8 usecount;
/* Register bit position for clock's enable/disable control. */
u8 enable_shift;
/* Register address for clock's enable/disable control. */
void __iomem *enable_reg;
u32 flags;
/* get the current clock rate (always a fresh value) */
unsigned long (*get_rate) (struct clk *);
/* Function ptr to set the clock to a new rate. The rate must match a
supported rate returned from round_rate. Leave blank if clock is not
programmable */
int (*set_rate) (struct clk *, unsigned long);
/* Function ptr to round the requested clock rate to the nearest
supported rate that is less than or equal to the requested rate. */
unsigned long (*round_rate) (struct clk *, unsigned long);
/* Function ptr to enable the clock. Leave blank if clock can not
be gated. */
int (*enable) (struct clk *);
/* Function ptr to disable the clock. Leave blank if clock can not
be gated. */
void (*disable) (struct clk *);
/* Function ptr to set the parent clock of the clock. */
int (*set_parent) (struct clk *, struct clk *);
};
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
#endif /* CONFIG_COMMON_CLK */
extern spinlock_t imx_ccm_lock;
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARCH_MXC_CLOCK_H__ */