USB: pxa168: Add onchip USB host controller support
- Add EHCI Host controller driver - Add wrapper that creates resources for host controller driver v2 - Call clk_put() after clk_disable() in probe function Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
7a01f496c5
commit
3abd7f68b2
|
@ -35,6 +35,13 @@ extern struct pxa_device_desc pxa168_device_fb;
|
|||
extern struct pxa_device_desc pxa168_device_keypad;
|
||||
extern struct pxa_device_desc pxa168_device_eth;
|
||||
|
||||
struct pxa168_usb_pdata {
|
||||
/* If NULL, default phy init routine for PXA168 would be called */
|
||||
int (*phy_init)(void __iomem *usb_phy_reg_base);
|
||||
};
|
||||
/* pdata can be NULL */
|
||||
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
|
||||
|
||||
static inline int pxa168_add_uart(int id)
|
||||
{
|
||||
struct pxa_device_desc *d = NULL;
|
||||
|
|
|
@ -25,6 +25,9 @@
|
|||
#include <mach/dma.h>
|
||||
#include <mach/devices.h>
|
||||
#include <mach/mfp.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <mach/pxa168.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "clock.h"
|
||||
|
@ -83,6 +86,7 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
|
|||
static APMU_CLK(nand, NAND, 0x19b, 156000000);
|
||||
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
|
||||
static APMU_CLK(eth, ETH, 0x09, 0);
|
||||
static APMU_CLK(usb, USB, 0x12, 0);
|
||||
|
||||
/* device and clock bindings */
|
||||
static struct clk_lookup pxa168_clkregs[] = {
|
||||
|
@ -104,6 +108,7 @@ static struct clk_lookup pxa168_clkregs[] = {
|
|||
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
|
||||
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
|
||||
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
|
||||
INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
|
||||
};
|
||||
|
||||
static int __init pxa168_init(void)
|
||||
|
@ -169,3 +174,44 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
|
|||
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
|
||||
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
|
||||
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
|
||||
|
||||
struct resource pxa168_usb_host_resources[] = {
|
||||
/* USB Host conroller register base */
|
||||
[0] = {
|
||||
.start = 0xd4209000,
|
||||
.end = 0xd4209000 + 0x200,
|
||||
.flags = IORESOURCE_MEM,
|
||||
.name = "pxa168-usb-host",
|
||||
},
|
||||
/* USB PHY register base */
|
||||
[1] = {
|
||||
.start = 0xd4206000,
|
||||
.end = 0xd4206000 + 0xff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
.name = "pxa168-usb-phy",
|
||||
},
|
||||
[2] = {
|
||||
.start = IRQ_PXA168_USB2,
|
||||
.end = IRQ_PXA168_USB2,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
|
||||
struct platform_device pxa168_device_usb_host = {
|
||||
.name = "pxa168-ehci",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &pxa168_usb_host_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
|
||||
.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
|
||||
.resource = pxa168_usb_host_resources,
|
||||
};
|
||||
|
||||
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
|
||||
{
|
||||
pxa168_device_usb_host.dev.platform_data = pdata;
|
||||
return platform_device_register(&pxa168_device_usb_host);
|
||||
}
|
||||
|
|
|
@ -69,6 +69,7 @@ config USB_ARCH_HAS_EHCI
|
|||
default y if ARCH_MSM
|
||||
default y if MICROBLAZE
|
||||
default y if SPARC_LEON
|
||||
default y if ARCH_MMP
|
||||
default PCI
|
||||
|
||||
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
|
||||
|
|
|
@ -578,3 +578,10 @@ config USB_OCTEON_OHCI
|
|||
config USB_OCTEON2_COMMON
|
||||
bool
|
||||
default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
|
||||
|
||||
config USB_PXA168_EHCI
|
||||
bool "Marvell PXA168 on-chip EHCI HCD support"
|
||||
depends on USB_EHCI_HCD && ARCH_MMP
|
||||
help
|
||||
Enable support for Marvell PXA168 SoC's on-chip EHCI
|
||||
host controller
|
||||
|
|
|
@ -1291,6 +1291,11 @@ MODULE_LICENSE ("GPL");
|
|||
#define PLATFORM_DRIVER ehci_grlib_driver
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USB_PXA168_EHCI
|
||||
#include "ehci-pxa168.c"
|
||||
#define PLATFORM_DRIVER ehci_pxa168_driver
|
||||
#endif
|
||||
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
|
||||
!defined(XILINX_OF_PLATFORM_DRIVER)
|
||||
|
|
363
drivers/usb/host/ehci-pxa168.c
Normal file
363
drivers/usb/host/ehci-pxa168.c
Normal file
|
@ -0,0 +1,363 @@
|
|||
/*
|
||||
* drivers/usb/host/ehci-pxa168.c
|
||||
*
|
||||
* Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
|
||||
*
|
||||
* Based on drivers/usb/host/ehci-orion.c
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk.h>
|
||||
#include <mach/pxa168.h>
|
||||
|
||||
#define USB_PHY_CTRL_REG 0x4
|
||||
#define USB_PHY_PLL_REG 0x8
|
||||
#define USB_PHY_TX_REG 0xc
|
||||
|
||||
#define FBDIV_SHIFT 4
|
||||
|
||||
#define ICP_SHIFT 12
|
||||
#define ICP_15 2
|
||||
#define ICP_20 3
|
||||
#define ICP_25 4
|
||||
|
||||
#define KVCO_SHIFT 15
|
||||
|
||||
#define PLLCALI12_SHIFT 25
|
||||
#define CALI12_VDD 0
|
||||
#define CALI12_09 1
|
||||
#define CALI12_10 2
|
||||
#define CALI12_11 3
|
||||
|
||||
#define PLLVDD12_SHIFT 27
|
||||
#define VDD12_VDD 0
|
||||
#define VDD12_10 1
|
||||
#define VDD12_11 2
|
||||
#define VDD12_12 3
|
||||
|
||||
#define PLLVDD18_SHIFT 29
|
||||
#define VDD18_19 0
|
||||
#define VDD18_20 1
|
||||
#define VDD18_21 2
|
||||
#define VDD18_22 3
|
||||
|
||||
|
||||
#define PLL_READY (1 << 23)
|
||||
#define VCOCAL_START (1 << 21)
|
||||
#define REG_RCAL_START (1 << 12)
|
||||
|
||||
struct pxa168_usb_drv_data {
|
||||
struct ehci_hcd ehci;
|
||||
struct clk *pxa168_usb_clk;
|
||||
struct resource *usb_phy_res;
|
||||
void __iomem *usb_phy_reg_base;
|
||||
};
|
||||
|
||||
static int ehci_pxa168_setup(struct usb_hcd *hcd)
|
||||
{
|
||||
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
||||
int retval;
|
||||
|
||||
ehci_reset(ehci);
|
||||
retval = ehci_halt(ehci);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
/*
|
||||
* data structure init
|
||||
*/
|
||||
retval = ehci_init(hcd);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
hcd->has_tt = 1;
|
||||
|
||||
ehci_port_power(ehci, 0);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static const struct hc_driver ehci_pxa168_hc_driver = {
|
||||
.description = hcd_name,
|
||||
.product_desc = "Marvell PXA168 EHCI",
|
||||
.hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
|
||||
|
||||
/*
|
||||
* generic hardware linkage
|
||||
*/
|
||||
.irq = ehci_irq,
|
||||
.flags = HCD_MEMORY | HCD_USB2,
|
||||
|
||||
/*
|
||||
* basic lifecycle operations
|
||||
*/
|
||||
.reset = ehci_pxa168_setup,
|
||||
.start = ehci_run,
|
||||
.stop = ehci_stop,
|
||||
.shutdown = ehci_shutdown,
|
||||
|
||||
/*
|
||||
* managing i/o requests and associated device resources
|
||||
*/
|
||||
.urb_enqueue = ehci_urb_enqueue,
|
||||
.urb_dequeue = ehci_urb_dequeue,
|
||||
.endpoint_disable = ehci_endpoint_disable,
|
||||
.endpoint_reset = ehci_endpoint_reset,
|
||||
|
||||
/*
|
||||
* scheduling support
|
||||
*/
|
||||
.get_frame_number = ehci_get_frame,
|
||||
|
||||
/*
|
||||
* root hub support
|
||||
*/
|
||||
.hub_status_data = ehci_hub_status_data,
|
||||
.hub_control = ehci_hub_control,
|
||||
.bus_suspend = ehci_bus_suspend,
|
||||
.bus_resume = ehci_bus_resume,
|
||||
.relinquish_port = ehci_relinquish_port,
|
||||
.port_handed_over = ehci_port_handed_over,
|
||||
|
||||
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
||||
};
|
||||
|
||||
static int pxa168_usb_phy_init(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
void __iomem *usb_phy_reg_base;
|
||||
struct pxa168_usb_pdata *pdata;
|
||||
struct pxa168_usb_drv_data *drv_data;
|
||||
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
||||
unsigned long reg_val;
|
||||
int pll_retry_cont = 10000, err = 0;
|
||||
|
||||
drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
|
||||
pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev,
|
||||
"Found HC with no PHY register addr. Check %s setup!\n",
|
||||
dev_name(&pdev->dev));
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (!request_mem_region(res->start, resource_size(res),
|
||||
ehci_pxa168_hc_driver.description)) {
|
||||
dev_dbg(&pdev->dev, "controller already in use\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
usb_phy_reg_base = ioremap(res->start, resource_size(res));
|
||||
if (usb_phy_reg_base == NULL) {
|
||||
dev_dbg(&pdev->dev, "error mapping memory\n");
|
||||
err = -EFAULT;
|
||||
goto err1;
|
||||
}
|
||||
drv_data->usb_phy_reg_base = usb_phy_reg_base;
|
||||
drv_data->usb_phy_res = res;
|
||||
|
||||
/* If someone wants to init USB phy in board specific way */
|
||||
if (pdata && pdata->phy_init)
|
||||
return pdata->phy_init(usb_phy_reg_base);
|
||||
|
||||
/* Power up the PHY and PLL */
|
||||
writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
|
||||
usb_phy_reg_base + USB_PHY_CTRL_REG);
|
||||
|
||||
/* Configure PHY PLL */
|
||||
reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
|
||||
reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
|
||||
CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
|
||||
ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
|
||||
writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
|
||||
|
||||
/* Make sure PHY PLL is ready */
|
||||
while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
|
||||
if (!(pll_retry_cont--)) {
|
||||
dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
|
||||
err = -EIO;
|
||||
goto err2;
|
||||
}
|
||||
}
|
||||
|
||||
/* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
|
||||
udelay(200);
|
||||
writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
|
||||
usb_phy_reg_base + USB_PHY_PLL_REG);
|
||||
udelay(40);
|
||||
writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
|
||||
usb_phy_reg_base + USB_PHY_PLL_REG);
|
||||
|
||||
/* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
|
||||
udelay(400);
|
||||
writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
|
||||
usb_phy_reg_base + USB_PHY_TX_REG);
|
||||
udelay(40);
|
||||
writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
|
||||
usb_phy_reg_base + USB_PHY_TX_REG);
|
||||
|
||||
/* Make sure PHY PLL is ready again */
|
||||
pll_retry_cont = 0;
|
||||
while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
|
||||
if (!(pll_retry_cont--)) {
|
||||
dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
|
||||
err = -EIO;
|
||||
goto err2;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
err2:
|
||||
iounmap(usb_phy_reg_base);
|
||||
err1:
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
struct usb_hcd *hcd;
|
||||
struct ehci_hcd *ehci;
|
||||
struct pxa168_usb_drv_data *drv_data;
|
||||
void __iomem *regs;
|
||||
int irq, err = 0;
|
||||
|
||||
if (usb_disabled())
|
||||
return -ENODEV;
|
||||
|
||||
pr_debug("Initializing pxa168-SoC USB Host Controller\n");
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq <= 0) {
|
||||
dev_err(&pdev->dev,
|
||||
"Found HC with no IRQ. Check %s setup!\n",
|
||||
dev_name(&pdev->dev));
|
||||
err = -ENODEV;
|
||||
goto err1;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev,
|
||||
"Found HC with no register addr. Check %s setup!\n",
|
||||
dev_name(&pdev->dev));
|
||||
err = -ENODEV;
|
||||
goto err1;
|
||||
}
|
||||
|
||||
if (!request_mem_region(res->start, resource_size(res),
|
||||
ehci_pxa168_hc_driver.description)) {
|
||||
dev_dbg(&pdev->dev, "controller already in use\n");
|
||||
err = -EBUSY;
|
||||
goto err1;
|
||||
}
|
||||
|
||||
regs = ioremap(res->start, resource_size(res));
|
||||
if (regs == NULL) {
|
||||
dev_dbg(&pdev->dev, "error mapping memory\n");
|
||||
err = -EFAULT;
|
||||
goto err2;
|
||||
}
|
||||
|
||||
hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
|
||||
&pdev->dev, dev_name(&pdev->dev));
|
||||
if (!hcd) {
|
||||
err = -ENOMEM;
|
||||
goto err3;
|
||||
}
|
||||
|
||||
drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
|
||||
|
||||
/* Enable USB clock */
|
||||
drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
|
||||
if (IS_ERR(drv_data->pxa168_usb_clk)) {
|
||||
dev_err(&pdev->dev, "Couldn't get USB clock\n");
|
||||
err = PTR_ERR(drv_data->pxa168_usb_clk);
|
||||
goto err4;
|
||||
}
|
||||
clk_enable(drv_data->pxa168_usb_clk);
|
||||
|
||||
err = pxa168_usb_phy_init(pdev);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "USB PHY initialization failed\n");
|
||||
goto err5;
|
||||
}
|
||||
|
||||
hcd->rsrc_start = res->start;
|
||||
hcd->rsrc_len = resource_size(res);
|
||||
hcd->regs = regs;
|
||||
|
||||
ehci = hcd_to_ehci(hcd);
|
||||
ehci->caps = hcd->regs + 0x100;
|
||||
ehci->regs = hcd->regs + 0x100 +
|
||||
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
||||
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
||||
hcd->has_tt = 1;
|
||||
ehci->sbrn = 0x20;
|
||||
|
||||
err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
|
||||
if (err)
|
||||
goto err5;
|
||||
|
||||
return 0;
|
||||
|
||||
err5:
|
||||
clk_disable(drv_data->pxa168_usb_clk);
|
||||
clk_put(drv_data->pxa168_usb_clk);
|
||||
err4:
|
||||
usb_put_hcd(hcd);
|
||||
err3:
|
||||
iounmap(regs);
|
||||
err2:
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
err1:
|
||||
dev_err(&pdev->dev, "init %s fail, %d\n",
|
||||
dev_name(&pdev->dev), err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
||||
struct pxa168_usb_drv_data *drv_data =
|
||||
(struct pxa168_usb_drv_data *)hcd->hcd_priv;
|
||||
|
||||
usb_remove_hcd(hcd);
|
||||
|
||||
/* Power down PHY & PLL */
|
||||
writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
|
||||
drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
|
||||
|
||||
clk_disable(drv_data->pxa168_usb_clk);
|
||||
clk_put(drv_data->pxa168_usb_clk);
|
||||
|
||||
iounmap(hcd->regs);
|
||||
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
||||
|
||||
iounmap(drv_data->usb_phy_reg_base);
|
||||
release_mem_region(drv_data->usb_phy_res->start,
|
||||
resource_size(drv_data->usb_phy_res));
|
||||
|
||||
usb_put_hcd(hcd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
MODULE_ALIAS("platform:pxa168-ehci");
|
||||
|
||||
static struct platform_driver ehci_pxa168_driver = {
|
||||
.probe = ehci_pxa168_drv_probe,
|
||||
.remove = __exit_p(ehci_pxa168_drv_remove),
|
||||
.shutdown = usb_hcd_platform_shutdown,
|
||||
.driver.name = "pxa168-ehci",
|
||||
};
|
Loading…
Reference in a new issue