Merge branch 'binding-doc-cp110-ap806' of git://git.infradead.org/linux-mvebu into clk-next
* 'binding-doc-cp110-ap806' of git://git.infradead.org/linux-mvebu: gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K pinctrl: dt-bindings: add documentation for CP110 pin controllers pinctrl: dt-bindings: add documentation for AP806 pin controllers dt-bindings: cp110: add sdio clock to cp-110 system controller dt-bindings: cp110: introduce a new binding dt-bindings: cp110: do not depend anymore of the *-clock-output-names
This commit is contained in:
commit
3cf50f6b13
|
@ -28,14 +28,73 @@ Required properties:
|
|||
- compatible: must be: "marvell,ap806-clock"
|
||||
- #clock-cells: must be set to 1
|
||||
|
||||
Pinctrl:
|
||||
--------
|
||||
|
||||
For common binding part and usage, refer to
|
||||
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
|
||||
|
||||
Required properties:
|
||||
- compatible must be "marvell,ap806-pinctrl",
|
||||
|
||||
Available mpp pins/groups and functions:
|
||||
Note: brackets (x) are not part of the mpp name for marvell,function and given
|
||||
only for more detailed description in this document.
|
||||
|
||||
name pins functions
|
||||
================================================================================
|
||||
mpp0 0 gpio, sdio(clk), spi0(clk)
|
||||
mpp1 1 gpio, sdio(cmd), spi0(miso)
|
||||
mpp2 2 gpio, sdio(d0), spi0(mosi)
|
||||
mpp3 3 gpio, sdio(d1), spi0(cs0n)
|
||||
mpp4 4 gpio, sdio(d2), i2c0(sda)
|
||||
mpp5 5 gpio, sdio(d3), i2c0(sdk)
|
||||
mpp6 6 gpio, sdio(ds)
|
||||
mpp7 7 gpio, sdio(d4), uart1(rxd)
|
||||
mpp8 8 gpio, sdio(d5), uart1(txd)
|
||||
mpp9 9 gpio, sdio(d6), spi0(cs1n)
|
||||
mpp10 10 gpio, sdio(d7)
|
||||
mpp11 11 gpio, uart0(txd)
|
||||
mpp12 12 gpio, sdio(pw_off), sdio(hw_rst)
|
||||
mpp13 13 gpio
|
||||
mpp14 14 gpio
|
||||
mpp15 15 gpio
|
||||
mpp16 16 gpio
|
||||
mpp17 17 gpio
|
||||
mpp18 18 gpio
|
||||
mpp19 19 gpio, uart0(rxd), sdio(pw_off)
|
||||
|
||||
GPIO:
|
||||
-----
|
||||
For common binding part and usage, refer to
|
||||
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "marvell,armada-8k-gpio"
|
||||
|
||||
- offset: offset address inside the syscon block
|
||||
|
||||
Example:
|
||||
ap_syscon: system-controller@6f4000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x6f4000 0x1000>;
|
||||
|
||||
syscon: system-controller@6f4000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x6f4000 0x1000>;
|
||||
|
||||
ap_clk: clock {
|
||||
compatible = "marvell,ap806-clock";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
ap_clk: clock {
|
||||
compatible = "marvell,ap806-clock";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
ap_pinctrl: pinctrl {
|
||||
compatible = "marvell,ap806-pinctrl";
|
||||
};
|
||||
|
||||
ap_gpio: gpio {
|
||||
compatible = "marvell,armada-8k-gpio";
|
||||
offset = <0x1040>;
|
||||
ngpios = <19>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&ap_pinctrl 0 0 19>;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -7,6 +7,13 @@ Controller 0 and System Controller 1. This Device Tree binding allows
|
|||
to describe the first system controller, which provides registers to
|
||||
configure various aspects of the SoC.
|
||||
|
||||
For the top level node:
|
||||
- compatible: must be: "syscon", "simple-mfd";
|
||||
- reg: register area of the CP110 system controller 0
|
||||
|
||||
Clocks:
|
||||
-------
|
||||
|
||||
The Device Tree node representing this System Controller 0 provides a
|
||||
number of clocks:
|
||||
|
||||
|
@ -27,6 +34,7 @@ The following clocks are available:
|
|||
- 0 2 EIP
|
||||
- 0 3 Core
|
||||
- 0 4 NAND core
|
||||
- 0 5 SDIO core
|
||||
- Gatable clocks
|
||||
- 1 0 Audio
|
||||
- 1 1 Comm Unit
|
||||
|
@ -56,28 +64,126 @@ The following clocks are available:
|
|||
Required properties:
|
||||
|
||||
- compatible: must be:
|
||||
"marvell,cp110-system-controller0", "syscon";
|
||||
- reg: register area of the CP110 system controller 0
|
||||
"marvell,cp110-clock"
|
||||
- #clock-cells: must be set to 2
|
||||
- core-clock-output-names must be set to:
|
||||
"cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"
|
||||
- gate-clock-output-names must be set to:
|
||||
"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
|
||||
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
|
||||
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
|
||||
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
|
||||
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
|
||||
|
||||
Pinctrl:
|
||||
--------
|
||||
|
||||
For common binding part and usage, refer to the file
|
||||
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "marvell,armada-7k-pinctrl",
|
||||
"marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl"
|
||||
depending on the specific variant of the SoC being used.
|
||||
|
||||
Available mpp pins/groups and functions:
|
||||
Note: brackets (x) are not part of the mpp name for marvell,function and given
|
||||
only for more detailed description in this document.
|
||||
|
||||
name pins functions
|
||||
================================================================================
|
||||
mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
|
||||
mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
|
||||
mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
|
||||
mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
|
||||
mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
|
||||
mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
|
||||
mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
|
||||
mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
|
||||
mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
|
||||
mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
|
||||
mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
|
||||
mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
|
||||
mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
|
||||
mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
|
||||
mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
|
||||
mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
|
||||
mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
|
||||
mpp17 17 gpio, dev(ad5), ge0(txd3)
|
||||
mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
|
||||
mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
|
||||
mpp20 20 gpio, dev(ad2), ge0(txd0)
|
||||
mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
|
||||
mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
|
||||
mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
|
||||
mpp24 24 gpio, dev(a0), au(i2slrclk)
|
||||
mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
|
||||
mpp26 26 gpio, dev(wen0), au(i2sbclk)
|
||||
mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
|
||||
mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
|
||||
mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
|
||||
mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
|
||||
mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
|
||||
mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
|
||||
mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
|
||||
mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
|
||||
mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
|
||||
mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
|
||||
mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
|
||||
mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
|
||||
mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
|
||||
mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
|
||||
mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
|
||||
mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
|
||||
mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
|
||||
mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
|
||||
mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
|
||||
mpp46 46 gpio, ge1(txd1), uart1(rts)
|
||||
mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
|
||||
mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
|
||||
mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
|
||||
mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
|
||||
mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
|
||||
mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
|
||||
mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
|
||||
mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
|
||||
mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
|
||||
mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
|
||||
mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
|
||||
mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
|
||||
mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
|
||||
mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
|
||||
mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
|
||||
mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
|
||||
|
||||
GPIO:
|
||||
-----
|
||||
|
||||
For common binding part and usage, refer to
|
||||
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "marvell,armada-8k-gpio"
|
||||
|
||||
- offset: offset address inside the syscon block
|
||||
|
||||
Example:
|
||||
|
||||
cpm_syscon0: system-controller@440000 {
|
||||
compatible = "marvell,cp110-system-controller0", "syscon";
|
||||
reg = <0x440000 0x1000>;
|
||||
cpm_syscon0: system-controller@440000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x440000 0x1000>;
|
||||
|
||||
cpm_clk: clock {
|
||||
compatible = "marvell,cp110-clock";
|
||||
#clock-cells = <2>;
|
||||
core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core";
|
||||
gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
|
||||
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
|
||||
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
|
||||
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
|
||||
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
|
||||
};
|
||||
|
||||
cpm_pinctrl: pinctrl {
|
||||
compatible = "marvell,armada-8k-cpm-pinctrl";
|
||||
};
|
||||
|
||||
cpm_gpio1: gpio@100 {
|
||||
compatible = "marvell,armada-8k-gpio";
|
||||
offset = <0x100>;
|
||||
ngpios = <32>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&cpm_pinctrl 0 0 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
@ -2,17 +2,27 @@
|
|||
|
||||
Required properties:
|
||||
|
||||
- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
|
||||
or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
|
||||
Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
|
||||
370. "marvell,mv78200-gpio" should be used for the Discovery
|
||||
MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
|
||||
SoCs (MV78230, MV78260, MV78460).
|
||||
- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
|
||||
"marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
|
||||
|
||||
"marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
|
||||
Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
|
||||
should be used for the Discovery MV78200.
|
||||
|
||||
"marvel,armadaxp-gpio" should be used for all Armada XP SoCs
|
||||
(MV78230, MV78260, MV78460).
|
||||
|
||||
"marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
|
||||
SoCs (either from AP or CP), see
|
||||
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
|
||||
and
|
||||
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
|
||||
for specific details about the offset property.
|
||||
|
||||
- reg: Address and length of the register set for the device. Only one
|
||||
entry is expected, except for the "marvell,armadaxp-gpio" variant
|
||||
for which two entries are expected: one for the general registers,
|
||||
one for the per-cpu registers.
|
||||
one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
|
||||
|
||||
- interrupts: The list of interrupts that are used for all the pins
|
||||
managed by this GPIO bank. There can be more than one interrupt
|
||||
|
|
Loading…
Reference in a new issue